A vulnerability was identified in Totolink A8000RU 7.1cu.643_b20200521. The affected element is the function setRadvdCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument maxRtrAdvInterval leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

Consensys gnark-crypto through 0.11.2 allows Signature Malleability. This occurs because deserialisation of EdDSA and ECDSA signatures does not ensure that the data is in a certain interval.

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function setOpenVpnClientCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument enabled can lead to os command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.

A weakness has been identified in Totolink A7100RU 7.4cu.2313_b20191024. This issue affects the function setUrlFilterRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument enable can lead to os command injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in Totolink A7100RU 7.4cu.2313_b20191024. This issue affects the function setTelnetCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument telnet_enabled results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this vulnerability is the function setTracerouteCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument command results in os command injection. The attack may be launched remotely. The exploit has been made public and could be used.

A vulnerability has been found in Totolink A7100RU 7.4cu.2313_b20191024. This vulnerability affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument ip leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument merge results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

The  iSherlock developed by HGiga  has an OS Command Injection vulnerability, allowing unauthenticated local attackers to inject arbitrary OS commands and execute them on the server.

A vulnerability has been found in Totolink A8000RU 7.1cu.643_b20200521. Impacted is the function CsteSystem of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument HTTP leads to os command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in mikexstudios Xcomic up to 0.8.2. This affects an unknown part. The manipulation of the argument cmd leads to os command injection. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 0.8.3 is able to address this issue. The patch is named 6ed8e3cc336e29f09c7e791863d0559939da98bf. It is recommended to upgrade the affected component.

A security vulnerability has been detected in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setStorageCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument sambaEnabled leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used.

A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this issue is the function setPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument admpass leads to os command injection. The attack can be executed remotely. The exploit has been disclosed publicly and may be used.

Dockwatch through 0.6.567 contains an unauthenticated OS command injection vulnerability that allows remote attackers to execute arbitrary shell commands by exploiting a missing exit() after an authentication redirect in loader.php combined with unsanitized input passed to shell_exec() in ajax/compose.php. Attackers can seed the required session flag through the incomplete auth check, then inject arbitrary commands via the composePath POST parameter in the composePull action to achieve full host compromise, facilitated by the standard deployment mounting of the Docker socket.

service/krashrpt.php in Quest KACE K1000 Systems Management Appliance before 6.4 SP3 (6.4.120822) allows a remote attacker to execute code via shell metacharacters in the kuid parameter.

A weakness has been identified in Totolink A8000RU 7.1cu.643_b20200521. This affects the function setAdvancedInfoShow of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument tty_server can lead to os command injection. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.

A vulnerability in Java deserialization used by Cisco Secure Access Control System (ACS) prior to release 5.8 patch 9 could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit this vulnerability by sending a crafted serialized Java object. An exploit could allow the attacker to execute arbitrary commands on the device with root privileges. Cisco Bug IDs: CSCvh25988.

A vulnerability was found in Totolink A8000RU 7.1cu.643_b20200521. This vulnerability affects the function setUrlFilterRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument enable results in os command injection. The attack can be launched remotely. The exploit has been made public and could be used.

A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. The affected element is the function setAdvancedInfoShow of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument tty_server leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used.

Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device.

A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected by this vulnerability is the function setTtyServiceCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument ttyEnable leads to os command injection. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

A security flaw has been discovered in Totolink A7100RU 7.4cu.2313_b20191024. The affected element is the function setWizardCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument wizard results in os command injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was determined in Totolink A8000RU 7.1cu.643_b20200521. Affected by this vulnerability is the function setIpv6LanCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument addrPrefixLen can lead to os command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A security flaw has been discovered in Totolink A8000RU 7.1cu.643_b20200521. The impacted element is the function setMiniuiHomeInfoShow of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument sys_info results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in Totolink A7100RU 7.4cu.2313_b20191024. This impacts the function UploadFirmwareFile of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument FileName results in os command injection. The attack may be initiated remotely. The exploit has been made public and could be used.

A vulnerability was detected in Totolink A7100RU 7.4cu.2313_b20191024. The impacted element is the function setLoginPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument admpass results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used.

A vulnerability, which was classified as critical, was found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023. This affects the function setDiagnosisCfg. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-237513 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in TOTOLINK EX1200L EN_V9.3.5u.6146_B20201023 and classified as critical. This vulnerability affects the function setTracerouteCfg. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-237514 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in Totolink A7100RU 7.4cu.2313_b20191024. Affected is the function setIptvCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument igmpVer causes os command injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks.

A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. Affected is the function setWiFiAclRules of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument mode leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via the urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because REMOTE_PORT is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

A vulnerability was identified in Totolink A7100RU 7.4cu.2313_b20191024. This affects the function setVpnPassCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument pptpPassThru leads to os command injection. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

A vulnerability was identified in Totolink A7100RU 7.4cu.2313_b20191024. The impacted element is the function setDmzCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument wanIdx leads to os command injection. The attack may be performed from remote. The exploit is publicly available and might be used.

The package com.alibaba:fastjson before 1.2.83 are vulnerable to Deserialization of Untrusted Data by bypassing the default autoType shutdown restrictions, which is possible under certain conditions. Exploiting this vulnerability allows attacking remote servers. Workaround: If upgrading is not possible, you can enable [safeMode](https://github.com/alibaba/fastjson/wiki/fastjson_safemode).

A security flaw has been discovered in Totolink A7100RU 7.4cu.2313_b20191024. This impacts the function setUPnPCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument enable results in os command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

Adobe ColdFusion versions 2023.5 (and earlier) and 2021.11 (and earlier) are affected by an Deserialization of Untrusted Data vulnerability that could result in Arbitrary code execution. Exploitation of this issue does not require user interaction.

PACSgear MediaWriter 5.2.1 exposes a .NET Remoting TCP service on port 9000 via PacsgearMediaServerEngine.dll, registered with ObjectURIs RemoteObj and UIRemoteObj, without any authentication requirement. By exploiting the MarshalByRefObject object unmarshalling technique and implementing .NET WebClient class methods, an unauthenticated remote attacker can read and write arbitrary files on the host filesystem. The ObjectURIs are identical across all installations by default. Chaining the arbitrary file write primitive with DLL hijacking opportunities in the MediaWriter service (which runs as NT Authority\\SYSTEM and loads missing DLLs such as CRYPTBASE.DLL from the application directory) enables unauthenticated remote code execution as SYSTEM upon service restart.

A vulnerability was determined in FoundationAgents MetaGPT up to 0.8.1. The affected element is the function Bash.run in the library metagpt/tools/libs/terminal.py. This manipulation causes os command injection. The attack is possible to be carried out remotely. The project was informed of the problem early through a pull request but has not reacted yet.

Subscriber PHP Object Injection in Buddyboss Platform <= 3.0.4 versions.

Shenzhen Aitemi M300 Wi-Fi Repeater (hardware model MT02) contains an unauthenticated OS command injection vulnerability that allows network-adjacent attackers to execute arbitrary shell commands by injecting unsanitized input through the smacfilter_conf handler in the commuos web backend. Attackers can append semicolon-delimited payloads to the name, enable, or mac GET parameters, which are passed without sanitization into sprintf() to build uci shell commands executed via doSystemCmdComlib(), granting full root-level control of the device.

PACSgear PACS Scan 5.2.1 contains an unauthenticated remote code execution vulnerability that allows remote attackers to read and write arbitrary files by exploiting an exposed .NET Remoting TCP service on port 22222 via PGImageExchQueue.exe without any authentication requirement. Attackers can chain the arbitrary file write primitive with DLL hijacking in PGImageExchangeQueueSvc.exe, which loads missing DLLs such as CRYPTSP.DLL from the application directory, to achieve remote code execution as NT Authority\SYSTEM upon service restart.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.4.2596 build 20231128 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.4.2596 build 20231128 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later

Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device.

Feast before 0.63.0 contains an unsafe deserialization vulnerability that allows unauthenticated or unauthorized attackers to achieve remote code execution by sending a crafted gRPC request to the registry server. The user_defined_function.body field of an OnDemandFeatureView spec is decoded from base64 and passed to dill.loads() before any authorization check is performed, enabling attackers to embed a malicious serialized Python object with an arbitrary __reduce__ method to execute OS commands as the feast service account.

Nozomi Networks Labs identified a CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') in the Console WebUI in Waterfall WF-500 TX and RX Hosts in version 7.9.1.0 R2502171040 that allows remote unauthenticated attackers to execute arbitrary operating system commands on the device.

D-Link DIR-859 1.05 and 1.06B01 Beta01 devices allow remote attackers to execute arbitrary OS commands via a urn: to the M-SEARCH method in ssdpcgi() in /htdocs/cgibin, because HTTP_ST is mishandled. The value of the urn: service/device is checked with the strstr function, which allows an attacker to concatenate arbitrary commands separated by shell metacharacters.

emfd in Ruckus Wireless Unleashed through 200.7.10.102.64 allows remote attackers to execute OS commands via a POST request with the attribute xcmd=import-category to admin/_cmdstat.jsp via the uploadFile attribute.

NVIDIA Spatial Intelligence Lab's (SIL) GEN3C contains an unauthenticated remote code execution vulnerability in the inference API server where the /request-inference and /seed-model endpoints deserialize raw HTTP request bodies using Python's pickle.loads() without authentication or input validation. Attackers can supply a crafted payload containing a __reduce__ gadget to the inference API port to achieve remote code execution as the inference process.

An issue in PGYER codefever v.2023.8.14-2ce4006 allows a remote attacker to execute arbitrary code via a crafted request to the branchList component.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of CentOS Web Panel cwp-e17.0.9.8.923. Authentication is not required to exploit this vulnerability. The specific flaw exists within ajax_crons.php. When parsing the user parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9740.