Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Univera Computer System Panorama allows Command Injection. This issue affects Panorama: before 8.0.

A low-privileged remote attacker could exploit the vulnerability and inject additional system commands via file system libraries which could give the attacker full control of the device.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of installations of Marvell QConvergeConsole 5.5.0.64. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the isHPSmartComponent method of the GWTTestServiceImpl class. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-10501.

DrayTek Vigor3900 v1.5.1.6 was discovered to contain an authenticated command injection vulnerability via the value parameter in the filter_string function.

The administrative interface of Cohesive Networks vns3:vpn appliances before version 4.11.1 is vulnerable to authenticated remote code execution leading to server compromise.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via keys smartqos_express_devices and smartqos_normal_devices in SetSmartQoSSettings.

D-Link DIR-846W A1 FW100A43 was discovered to contain a remote command execution (RCE) vulnerability via the wl(0).(0)_ssid parameter. This vulnerability is exploited via a crafted POST request.

NeDi 1.9C is vulnerable to Remote Command Execution. System-Snapshot.php improperly escapes shell metacharacters from a POST request. An attacker can exploit this by crafting an arbitrary payload (any system commands) that contains shell metacharacters via a POST request with a psw parameter. (This can also be exploited via CSRF.)

OCS Inventory NG 2.7 allows Remote Command Execution via shell metacharacters to require/commandLine/CommandLine.php because mib_file in plugins/main_sections/ms_config/ms_snmp_config.php is mishandled in get_mib_oid.

NeDi 1.9C is vulnerable to Remote Command Execution. pwsec.php improperly escapes shell metacharacters from a POST request. An attacker can exploit this by crafting an arbitrary payload (any system commands) that contains shell metacharacters via a POST request with a pw parameter. (This can also be exploited via CSRF.)

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability  allows OS Command Injection as root This issue affects Iocharger firmware for AC model chargers before version 24120701. Likelihood: Moderate – The <redacted> binary does not seem to be used by the web interface, so it might be more difficult to find. It seems to be largely the same binary as used by the Iocharger Pedestal charging station, however. The attacker will also need a (low privilege) account to gain access to the <redacted> binary, or convince a user with such access to execute a crafted HTTP request. Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and delete files and services. CVSS clarification: Any network interface serving the web ui is vulnerable (AV:N) and there are not additional security measures to circumvent (AC:L), nor does the attack require and existing preconditions (AT:N). The attack is authenticated, but the level of authentication does not matter (PR:L), nor is any user interaction required (UI:N). The attack leads to a full compromised (VC:H/VI:H/VA:H), and compromised devices can be used to pivot into networks that should potentially not be accessible (SC:L/SI:L/SA:H). Becuase this is an EV charger handing significant power, there is a potential safety impact (S:P). This attack can be automated (AU:Y).

A low privileged remote attacker can trigger the execution of arbitrary OS commands as root due to improper neutralization of special elements in the variable PROXY_HTTP_PORT in mGuard devices.

Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability allows OS Command Injection as root This issue affects Iocharger firmware for AC model chargers before version 24120701 Likelihood: Moderate – The <redacted> binary does not seem to be used by the web interface, so it might be more difficult to find. It seems to be largely the same binary as used by the Iocharger Pedestal charging station, however. The attacker will also need a (low privilege) account to gain access to the <redacted> binary, or convince a user with such access to execute a crafted HTTP request. Impact: Critical – The attacker has full control over the charging station as the root user, and can arbitrarily add, modify and delete files and services.

Loadbalancer.org Enterprise VA MAX through 8.3.8 has an OS Command Injection vulnerability that allows a remote authenticated attacker to execute arbitrary code.

QuickBox Community Edition through 2.5.5 and Pro Edition through 2.1.8 allows an authenticated remote attacker to execute code on the server via command injection in the servicestart parameter.

rConfig 3.9.4 and earlier allows authenticated code execution (of system commands) by sending a forged GET request to lib/ajaxHandlers/ajaxAddTemplate.php or lib/ajaxHandlers/ajaxEditTemplate.php.

D-Link DIR-865L Ax 1.20B01 Beta devices allow Command Injection.

Netis N3Mv2-V1.0.1.865 was discovered to contain a command injection vulnerability in the diagnostic tools page. This vulnerability is exploited via a crafted HTTP request.

The ATOS/Sips (aka Atos-Magento) community module 3.0.0 to 3.0.5 for Magento allows command injection.

Zavio CF7500, CF7300, CF7201, CF7501, CB3211, CB3212, CB5220, CB6231, B8520, B8220, and CD321 IP Cameras with firmware version M2.1.6.05 has a command injection vulnerability in their implementation of their binaries and handling of network requests.

Certain TP-Link devices allow Command Injection. This affects NC200 2.1.9 build 200225, NC210 1.0.9 build 200304, NC220 1.3.0 build 200304, NC230 1.3.0 build 200304, NC250 1.3.0 build 200304, NC260 1.5.2 build 200304, and NC450 1.5.3 build 200304.

An issue was discovered in Open-AudIT 3.3.1. There is shell metacharacter injection via attributes to an open-audit/configuration/ URI. An attacker can exploit this by adding an excluded IP address to the global discovery settings (internally called exclude_ip). This exclude_ip value is passed to the exec function in the discoveries_helper.php file (inside the all_ip_list function) without being filtered, which means that the attacker can provide a payload instead of a valid IP address.

Certain TP-Link devices allow Command Injection. This affects NC260 1.5.2 build 200304 and NC450 1.5.3 build 200304.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setUrlFilterRules. Authenticated Attackers can send malicious packet to execute arbitrary commands.

The novish command-line interface, included in NoviFlow NoviWare before NW500.2.12 and deployed on NoviSwitch devices, is vulnerable to command injection in the "show status destination ipaddr" command. This could be used by a read-only user (monitoring group) or admin to execute commands on the operating system.

Pepperl+Fuchs Comtrol IO-Link Master in Version 1.5.48 and below is prone to an authenticated blind OS Command Injection.

DKIM key management page vulnerability on Micro Focus Secure Messaging Gateway (SMG). Affecting all SMG Appliance running releases prior to July 2020. The vulnerability could allow a logged in user with rights to generate DKIM key information to inject system commands into the call to the DKIM system command.

An issue was discovered in Open-AudIT 3.2.2. There is OS Command injection in Discovery.

VIVOTEK Network Cameras before XXXXX-VVTK-2.2002.xx.01x (and before XXXXX-VVTK-0XXXX_Beta2) allows an authenticated user to upload and execute a script (with resultant execution of OS commands). For example, this affects IT9388-HT devices.

SABnzbd 2.3.9 and 3.0.0Alpha2 has a command injection vulnerability in the web configuration interface that permits an authenticated user to execute arbitrary Python commands on the underlying operating system.

An issue was found in Apache Airflow versions 1.10.10 and below. A remote code/command injection vulnerability was discovered in one of the example DAGs shipped with Airflow which would allow any authenticated user to run arbitrary commands as the user running airflow worker/scheduler (depending on the executor in use). If you already have examples disabled by setting load_examples=False in the config then you are not vulnerable.

Beeline Smart Box 2.0.38 routers allow "Advanced settings > Other > Diagnostics" OS command injection via the Ping ping_ipaddr parameter, the Nslookup nslookup_ipaddr parameter, or the Traceroute traceroute_ipaddr parameter.

ASUS RT-AX55’s authentication-related function has a vulnerability of insufficient filtering of special characters within its code-authentication module. An authenticated remote attacker can exploit this vulnerability to perform a Command Injection attack to execute arbitrary commands, disrupt the system or terminate services.

An authenticated command injection vulnerability exists in the HPE Aruba Networking EdgeConnect SD-WAN gateways Command Line Interface. Successful exploitation of this vulnerability results in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

IntelMQ Manager from version 1.1.0 and before version 2.1.1 has a vulnerability where the backend incorrectly handled messages given by user-input in the "send" functionality of the Inspect-tool of the Monitor component. An attacker with access to the IntelMQ Manager could possibly use this issue to execute arbitrary code with the privileges of the webserver. Version 2.1.1 fixes the vulnerability.

BrainyCP 1.0 contains an authenticated remote code execution vulnerability that allows logged-in users to inject arbitrary commands through the crontab configuration interface. Attackers can exploit the crontab endpoint by adding a malicious command that spawns a reverse shell to a specified IP and port.

An issue was discovered in Titan SpamTitan 7.07. Improper validation of the parameter fname on the page certs-x.php would allow an attacker to execute remote code on the target server. The user has to be authenticated before interacting with this page.

WFS-SR03 v1.0.3 was discovered to contain a command injection vulnerability via the sys_smb_pwdmod function.

Brandon Rothel from QED Secure Solutions and Sam Hanson of Dragos have found that the VAPIX API tcptest.cgi did not have a sufficient input validation allowing for a possible remote code execution. This flaw can only be exploited after authenticating with an operator- or administrator-privileged service account. The impact of exploiting this vulnerability is lower with operator-privileges compared to administrator-privileges service accounts. Please refer to the Axis security advisory for more information and solution.

WebAccess/NMS (versions prior to 3.0.2) does not properly sanitize user input and may allow an attacker to inject system commands remotely.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Honeywell MB-Secure allows Privilege Abuse. This issue affects MB-Secure: from V11.04 before V12.53 and MB-Secure PRO from V01.06 before V03.09.Honeywell also recommends updating to the most recent version of this product.

The /admin/admapi.php script of Invigo Automatic Device Management (ADM) through 5.0 allows remote authenticated attackers to execute arbitrary OS commands on the server as the user running the application.

lib/ajaxHandlers/ajaxAddTemplate.php in rConfig through 3.94 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the fileName POST parameter.

The improper neutralization of special elements in the CGI program of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an authenticated attacker to execute some operating system (OS) commands by sending a crafted URL to a vulnerable device.

IBM Aspera Orchestrator 4.0.1 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 260116.

An issue was discovered in Froxlor before 0.10.14. Remote attackers with access to the installation routine could have executed arbitrary code via the database configuration options that were passed unescaped to exec, because of _backupExistingDatabase in install/lib/class.FroxlorInstall.php.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the dns_query_name parameter in a dns_query.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. They allow remote attackers to execute arbitrary commands via the date parameter in a system_time.cgi POST request. TRENDnet TEW-632BRP 1.010B32 is also affected.