A vulnerability was found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. It has been rated as critical. Affected by this issue is the function setParentalRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument startTime/endTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272600. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in TOTOLINK A3600R 4.1.2cu.5182_B20201102 and classified as critical. Affected by this vulnerability is the function setUrlFilterRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument url leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-272605 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. It has been classified as critical. Affected is the function setLanguageCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument langType leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-272598 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in TOTOLINK N350RT 9.3.5u.6139_B20201216. This affects the function setWizardCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ssid leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-273555. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. This affects the function setPortForwardRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument comment leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-272601 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in TOTOLINK EX1200L 9.3.5u.6146_B20201023. This affects the function setParentalRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument week/sTime/eTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-273261 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. It has been declared as critical. This vulnerability affects the function UploadCustomModule of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument File leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272608. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in Vivotek CC8160 VVTK-0100d and classified as critical. Affected by this issue is the function read of the component httpd. The manipulation of the argument Content-Length leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-273524. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed that the affected release tree is end-of-life.

A vulnerability classified as critical was found in TOTOLINK EX200 4.0.3c.7646_B20201211. Affected by this vulnerability is the function loginauth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument http_host leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-273259. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in TOTOLINK A7000R 9.1.0u.6268_B20220504. Affected is the function setWizardCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ssid leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272784. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in TOTOLINK N350RT 9.3.5u.6139_B20201216. It has been declared as critical. This vulnerability affects the function setParentalRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument week/sTime/eTime leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-273256. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in TOTOLINK A3300R 17.0.0cu.557_B20221024 and classified as critical. Affected by this issue is the function UploadCustomModule of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument File leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-273254 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. Affected is the function setUploadSetting of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272604. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in TOTOLINK A7000R 9.1.0u.6268_B20220504. This issue affects the function loginauth of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument password leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-272783. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in TOTOLINK A3600R 4.1.2cu.5182_B20201102. It has been classified as critical. This affects the function setWiFiAclAddConfig of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument comment leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-272607. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The VMX process in VMware ESXi 4.1 and ESX 4.1 does not properly handle RPC commands, which allows guest OS users to cause a denial of service (memory overwrite and process crash) or possibly execute arbitrary code on the host OS via vectors involving function pointers.

The VMX process in VMware ESXi 3.5 through 4.1 and ESX 3.5 through 4.1 does not properly handle RPC commands, which allows guest OS users to cause a denial of service (memory overwrite and process crash) or possibly execute arbitrary code on the host OS via vectors involving data pointers.

A vulnerability classified as critical was found in TOTOLINK CP900 6.3c.566. This vulnerability affects the function UploadCustomModule of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument File leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-273556. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Tenda RX3 16.03.13.11. Impacted is the function fromSetIpMacBind of the file /goform/SetIpMacBind. Such manipulation of the argument list leads to stack-based buffer overflow. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

OpenBase 10.0.5 and earlier allows remote authenticated users to trigger a free of an arbitrary memory location via long strings in a SELECT statement. NOTE: this might be a buffer overflow, but it is not clear.

A heap overflow vulnerability in Citrix NetScaler Gateway versions 10.1 before 135.8/135.12, 10.5 before 65.11, 11.0 before 70.12, and 11.1 before 52.13 allows a remote authenticated attacker to run arbitrary commands via unspecified vectors.

A vulnerability was found in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/ConfigExceptAli. The manipulation results in buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

TOTOLINK A810R V4.1.2cu.5182_B20201026 is vulnerable to Buffer Overflow in infostat.cgi.

A weakness has been identified in D-Link DI-8400 16.07.26A1. The affected element is the function yyxz_dlink_asp of the file /yyxz.asp. This manipulation of the argument ID causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

Buffer overflow in Active Management Technology (AMT) in Intel Manageability Engine Firmware 8.x/9.x/10.x/11.0/11.5/11.6/11.7/11.10/11.20 allows attacker with remote Admin access to the system to execute arbitrary code with AMT execution privilege.

A security flaw has been discovered in Totolink A3600R 5.9c.4959. This issue affects the function setAppEasyWizardConfig in the library /lib/cste_modules/app.so. Performing a manipulation of the argument apcliSsid results in buffer overflow. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function setRIP of the file /goform/setRIP. The manipulation of the argument RIPmode/RIPpasswd leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Buffer overflow in Active Directory, Active Directory Application Mode (ADAM), and Active Directory Lightweight Directory Service (AD LDS) in Microsoft Windows XP SP2 and SP3, Windows Server 2003 SP2, Windows Vista SP2, Windows Server 2008 SP2, R2, and R2 SP1, and Windows 7 Gold and SP1 allows remote authenticated users to execute arbitrary code via a crafted query that leverages incorrect memory initialization, aka "Active Directory Buffer Overflow Vulnerability."

A vulnerability classified as critical was found in Tenda O3V2 1.0.0.12(3880). Affected by this vulnerability is the function formWifiMacFilterSet of the file /goform/setWrlFilterList of the component httpd. The manipulation of the argument macList leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

Multiple buffer overflows in the ctl_put* functions in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allow remote authenticated users to have unspecified impact via a long variable.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 suffer from a buffer overflow in an API function, where a string is copied into a caller-provided buffer without checking the length. This requires a valid login to exploit.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 suffer from a heap-based overflow vulnerability, where certain input can corrupt the heap and crash the forked process.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability classified as critical has been found in Tenda O3V2 1.0.0.12(3880). Affected is the function setAutoReboot of the file /goform/setNetworkService of the component httpd. The manipulation of the argument week leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 suffer from a stack-based buffer overflow, where a string is copied into a buffer using a memcpy-like function and a user-provided length. This requires a valid login to exploit.

A vulnerability classified as critical has been found in Tenda AX1803 1.0.0.1. Affected is the function formSetMacFilterCfg of the file /goform/setMacFilterCfg. The manipulation of the argument deviceList leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability has been found in Tenda FH1201 1.2.0.14 and classified as critical. This vulnerability affects the function fromSafeUrlFilter of the file /goform/fromSafeUrlFilter of the component HTTP POST Request Handler. The manipulation of the argument page leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Belkin F9K1122 1.00.33. It has been classified as critical. Affected is the function formWlanMP of the file /goform/formWlanMP of the component webs. The manipulation of the argument ateFunc/ateGain/ateTxCount/ateChan/ateRate/ateMacID/e2pTxPower1/e2pTxPower2/e2pTxPower3/e2pTxPower4/e2pTxPower5/e2pTxPower6/e2pTxPower7/e2pTx2Power1/e2pTx2Power2/e2pTx2Power3/e2pTx2Power4/e2pTx2Power5/e2pTx2Power6/e2pTx2Power7/ateTxFreqOffset/ateMode/ateBW/ateAntenna/e2pTxFreqOffset/e2pTxPwDeltaB/e2pTxPwDeltaG/e2pTxPwDeltaMix/e2pTxPwDeltaN/readE2P leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The issue was addressed with improved bounds checks. This issue is fixed in macOS Ventura 13.3, macOS Monterey 12.6.4, macOS Big Sur 11.7.5. A remote user may be able to cause unexpected app termination or arbitrary code execution.

VMware ESXi (6.0 before ESXi600-201711101-SG, 5.5 ESXi550-201709101-SG), Workstation (12.x before 12.5.8), and Fusion (8.x before 8.5.9) contain a vulnerability that could allow an authenticated VNC session to cause a stack overflow via a specific set of VNC packets. Successful exploitation of this issue could result in remote code execution in a virtual machine via the authenticated VNC session. Note: In order for exploitation to be possible in ESXi, VNC must be manually enabled in a virtual machine's .vmx configuration file. In addition, ESXi must be configured to allow VNC traffic through the built-in firewall.

A vulnerability has been found in Tenda AC20 16.03.08.12. This affects the function set_qosMib_list of the file /goform/SetNetControlList of the component SetNetControlList Endpoint. The manipulation of the argument list leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.