A vulnerability was found in Tenda CH22 1.0.0.1. This vulnerability affects the function fromSetIpBind of the file /goform/SetIpBind. The manipulation of the argument page results in buffer overflow. The attack must originate from the local network. The exploit has been made public and could be used.

A vulnerability has been found in Tenda CH22 1.0.0.1. This affects the function fromSafeMacFilter of the file /goform/SafeMacFilter. The manipulation of the argument page leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A flaw has been found in Tenda CH22 1.0.0.1. Affected by this issue is the function fromSafeUrlFilter of the file /goform/SafeUrlFilter. Executing a manipulation of the argument page can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.

A vulnerability was detected in Tenda CH22 1.0.0.1. Affected by this vulnerability is the function fromSafeClientFilter of the file /goform/SafeClientFilter. Performing a manipulation of the argument page results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

A vulnerability has been found in Tenda AC6 15.03.06.50. This issue affects some unknown processing of the file /goform/WifiGuestSet of the component HTTP Request Handler. Such manipulation of the argument shareSpeed leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Tenda O3 1.0.0.10(2478). This issue affects the function SetValue/GetValue of the file /goform/sysAutoReboot. Performing a manipulation of the argument enable results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

A security vulnerability has been detected in Tenda O3 1.0.0.10(2478). This vulnerability affects the function SetValue/GetValue of the file /goform/setVlanConfig. Such manipulation of the argument lan leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used.

A weakness has been identified in Tenda O3 1.0.0.10(2478). This affects the function SetValue/GetValue of the file /goform/setNetworkService. This manipulation of the argument upnpEn causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in Tenda O3 1.0.0.10(2478). Affected by this issue is the function SetValue/GetValue of the file /goform/setDmzInfo. The manipulation of the argument dmzIP results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in Tenda O3 1.0.0.10(2478). Affected by this vulnerability is the function SetValue/GetValue of the file /goform/AdvSetLanip. The manipulation of the argument lanIp leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is publicly available and might be used.

A vulnerability was determined in Tenda O3 1.0.0.10(2478). Affected is the function SetValue/GetValue of the file /goform/setDhcpConfig. Executing a manipulation of the argument dhcpEn can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.

A vulnerability was detected in Kamailio 5.5. The affected element is the function sr_push_yy_state of the file src/core/cfg.lex of the component Configuration File Handler. The manipulation results in use after free. The attack must be initiated from a local position. The exploit is now public and may be used. The real existence of this vulnerability is still doubted at the moment. This attack requires manipulating config files which might not be a realistic scenario in many cases. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Kamailio 5.5. Impacted is the function rve_destroy of the file src/core/rvalue.c of the component Configuration File Handler. The manipulation leads to heap-based buffer overflow. The attack must be carried out locally. The exploit has been disclosed publicly and may be used. There is ongoing doubt regarding the real existence of this vulnerability. This attack requires manipulating config files which might not be a realistic scenario in many cases. The vendor was contacted early about this disclosure but did not respond in any way.

StarCharge Artemis AC Charger 7-22 kW v1.0.4 was discovered to contain a stack overflow via the cgiMain function at download.cgi.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formEasySetTimezone.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetEasy_Wizard.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetWizard1.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetPortTr.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetDomainFilter.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formAdvNetwork.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formAdvFirewall.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetMACFilter.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetRoute.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formLogDnsquery.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetLog.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the next_page parameter in the function formDeviceReboot.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetWizardSelectMode.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formVirtualServ.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSchedule.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetEmail.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetWAN_Wizard7.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formTcpipSetup.

D-Link DIR600LAx FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formSetQoS.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formAutoDetecWAN_wizard4.

D-Link DIR600L Ax FW116WWb01 was discovered to contain a buffer overflow via the curTime parameter in the function formWlSiteSurvey.

NVIDIA Display Driver for Windows and Linux contains a vulnerability in a video decoder, where an attacker might cause an out-of-bounds read. A successful exploit of this vulnerability might lead to information disclosure or denial of service.

OpenWrt Project is a Linux operating system targeting embedded devices. Prior to version 24.10.4, local users could read and write arbitrary kernel memory using the ioctls of the ltq-ptm driver which is used to drive the datapath of the DSL line. This only effects the lantiq target supporting xrx200, danube and amazon SoCs from Lantiq/Intel/MaxLinear with the DSL in PTM mode. The DSL driver for the VRX518 is not affected. ATM mode is also not affected. Most VDSL lines use PTM mode and most ADSL lines use ATM mode. OpenWrt is normally running as a single user system, but some services are sandboxed. This vulnerability could allow attackers to escape a ujail sandbox or other contains. This is fixed in OpenWrt 24.10.4. There are no workarounds.

D-Link DIR-823G A1 v1.0.2B05 was discovered to contain a buffer overflow in the FillMacCloneMac parameter in the /EXCU_SHELL endpoint. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

TOTOLINK N600R v4.3.0cu.7866_B20220506 was discovered to contain a stack overflow in the ssid parameter in the setWiFiBasicConfig function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Tenda AC6 V2.0 15.03.06.50 was discovered to contain a stack overflow in the ssid parameter in the fast_setting_wifi_set function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Tenda AC6 V2.0 15.03.06.50 was discovered to contain a stack overflow in the page parameter in the addressNat function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

TOTOLINK N600R v4.3.0cu.7866_B20220506 was discovered to contain a stack overflow in the wepkey2 parameter in the setWiFiMultipleConfig function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: PIA Core Technology). Supported versions that are affected are 8.60, 8.61 and 8.62. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data as well as unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 5.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:L/I:L/A:N).

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: PIA Core Technology). Supported versions that are affected are 8.60, 8.61 and 8.62. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in PeopleSoft Enterprise PeopleTools, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data as well as unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 5.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N).

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: PIA Core Technology). Supported versions that are affected are 8.60, 8.61 and 8.62. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in PeopleSoft Enterprise PeopleTools, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data as well as unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 6.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N).

Vulnerability in the RDBMS Functional Index component of Oracle Database Server. Supported versions that are affected are 23.4-23.9. Easily exploitable vulnerability allows high privileged attacker having SYSDBA privilege with network access via Oracle Net to compromise RDBMS Functional Index. Successful attacks of this vulnerability can result in unauthorized read access to a subset of RDBMS Functional Index accessible data. CVSS 3.1 Base Score 2.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:N/A:N).

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Rich Text Editor). Supported versions that are affected are 8.60, 8.61 and 8.62. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in PeopleSoft Enterprise PeopleTools, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of PeopleSoft Enterprise PeopleTools accessible data as well as unauthorized read access to a subset of PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 5.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N).

A security vulnerability has been detected in DCMTK up to 3.6.5. The affected element is the function parseQuota of the component dcmqrscp. The manipulation of the argument StorageQuota leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed publicly and may be used. Upgrading to version 3.6.6 is sufficient to fix this issue. The identifier of the patch is 0fef9f02e. It is recommended to upgrade the affected component.

GeographicLib 2.5 is vulnerable to Buffer Overflow in GeoConvert DMS::InternalDecode.

In NetXDuo version before 6.4.4, a networking support module for Eclipse Foundation ThreadX, in the DHCPV6 client there was an unchecked index extracting the server DUID from the server reply. With a crafted packet, an attacker could cause an out of memory read.

Out-of-bounds Read in lws_upng_emit_next_line in warmcat libwebsockets allows, when the LWS_WITH_UPNG flag is enabled during compilation and the HTML display stack is used, to read past a heap allocated buffer possibly causing a crash, when the user visits an attacker controlled website that contains a crafted PNG file with a big height dimension.