A vulnerability was identified in Ruijie WS7204-A 2017.06.15. Affected by this vulnerability is an unknown functionality of the file /itbox_pi/branch_import.php?a=branch_list. Such manipulation of the argument province leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in DCN DCME-720 9.1.5.11. This affects an unknown function of the file /usr/local/www/function/audit/newstatistics/ip_block.php of the component Web Management Backend. Performing manipulation of the argument ip results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. Other products might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way.

Roo Code is an AI-powered autonomous coding agent that lives in users' editors. In versions prior to 3.25.5, Roo-Code fails to properly handle process substitution and single ampersand characters in the command parsing logic for auto-execute commands. If a user has enabled auto-approved execution for a command such as ls, an attacker who can submit crafted prompts to the agent may inject arbitrary commands to be executed alongside the intended command. Exploitation requires attacker access to submit prompts and for the user to have enabled auto-approved command execution, which is disabled by default. This vulnerability could allow an attacker to execute arbitrary code. The issue is fixed in version 3.25.5.

A remote unauthenticated attacker who has bypassed authentication could execute arbitrary OS commands to disclose, tamper with, destroy or delete information in Mitsubishi Electric smartRTU, or cause a denial-of service condition on the product.

A flaw has been found in wong2 mcp-cli 1.13.0. Affected is the function redirectToAuthorization of the file /src/oauth/provider.js of the component oAuth Handler. This manipulation causes os command injection. The attack may be initiated remotely. The attack is considered to have high complexity. The exploitability is told to be difficult. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function addStaticRoute of the file /goform/addStaticRoute. Such manipulation of the argument staticRoute_IP_setting/staticRoute_Netmask_setting/staticRoute_Gateway_setting/staticRoute_Metric_setting/staticRoute_destType_setting leads to os command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The StrongDM macOS client incorrectly processed JSON-formatted messages. Attackers could potentially modify macOS system configuration by crafting a malicious JSON message.

The StrongDM Windows service incorrectly handled input validation. Authenticated attackers could potentially exploit this leading to privilege escalation.

FreeNAS 0.7.2 prior to revision 5543 includes an unauthenticated command‐execution backdoor in its web interface. The exec_raw.php script exposes a cmd parameter that is passed directly to the underlying shell without sanitation.

An issue was discovered in Commvault before 11.36.60. A security vulnerability has been identified that allows remote attackers to inject or manipulate command-line arguments passed to internal components due to insufficient input validation. Successful exploitation results in a valid user session for a low privilege role.

A security flaw has been discovered in neurobin shc up to 4.0.3. Impacted is the function make of the file src/shc.c of the component Environment Variable Handler. The manipulation results in os command injection. The attack is only possible with local access. The exploit has been released to the public and may be exploited.

A vulnerability was determined in neurobin shc up to 4.0.3. This vulnerability affects the function make of the file src/shc.c of the component Filename Handler. Executing manipulation can lead to os command injection. The attack can only be executed locally. The exploit has been publicly disclosed and may be utilized.

TOTOLINK A3002R v4.0.0-B20230531.1404 was discovered to contain multiple OS command injection vulnerabilities via the macstr, bandstr, and clientoff parameters at /boafrm/formMapDelDevice.

Claude Code is an agentic coding tool. Prior to version 1.0.4, it's possible to bypass the Claude Code confirmation prompts to read a file and then send file contents over the network without user confirmation due to an overly broad allowlist of safe commands. Reliably exploiting this requires the ability to add untrusted content into a Claude Code context window. Users on standard Claude Code auto-update received this fix automatically after release. Current users of Claude Code are unaffected, as versions prior to 1.0.24 are deprecated and have been forced to update.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability in the CLI of Cisco Secure Firewall Management Center (FMC) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root. This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials. For more information about vulnerable scenarios, see the Details ["#details"] section of this advisory.

Improper Input Validation vulnerability in N-able N-central allows OS Command Injection.This issue affects N-central: before 2025.3.1.

An issue was discovered on KuWFi GC111 devices (Hardware Version: CPE-LM321_V3.2, Software Version: GC111-GL-LM321_V3.0_20191211). They are vulnerable to unauthenticated /goform/goform_set_cmd_process requests. A crafted POST request, using the SSID parameter, allows remote attackers to execute arbitrary OS commands with root privileges.

Snort Report versions < 1.3.2 contains a remote command execution vulnerability in the nmap.php and nbtscan.php scripts. These scripts fail to properly sanitize user input passed via the target GET parameter, allowing attackers to inject arbitrary shell commands. Exploitation requires no authentication and can result in full compromise of the underlying system.

Dolibarr ERP/CRM versions <= 3.1.1 and <= 3.2.0 contain a post-authenticated OS command injection vulnerability in its database backup feature. The export.php script fails to sanitize the sql_compat parameter, allowing authenticated users to inject arbitrary system commands, resulting in remote code execution on the server.

NVIDIA WebDataset for all platforms contains a vulnerability where an attacker could execute arbitrary code with elevated permissions. A successful exploit of this vulnerability might lead to escalation of privileges, data tampering, information disclosure, and denial of service.

Cherry Studio is a desktop client that supports for multiple LLM providers. In version 1.5.1, a remote code execution (RCE) vulnerability exists in the Cherry Studio platform when connecting to streamableHttp MCP servers. The issue arises from the server’s implicit trust in the oauth auth redirection endpoints and failure to properly sanitize the URL. This issue has been patched in version 1.5.2.

Cherry Studio is a desktop client that supports for multiple LLM providers. From versions 1.2.5 to 1.5.1, Cherry Studio is vulnerable to OS Command Injection during a connection with a malicious MCP server in HTTP Streamable mode. Attackers can setup a malicious MCP server with compatible OAuth authorization server endpoints and trick victims into connecting it, leading to OS command injection in vulnerable clients. This issue has been patched in version 1.5.2.

The /goform/formJsonAjaxReq POST endpoint of Shenzhen Tuoshi NR500-EA RG500UEAABxCOMSLICv3.4.2731.16.43 devices mishandles the set_timesetting action with the ntpserver0 parameter, which is used in a system command. By setting a username=admin cookie (bypassing normal session checks), an unauthenticated attacker can use that parameter to execute arbitrary OS commands.

OS Command Injection in Olivetin 2025.4.22 Custom Themes via the ParseRequestURI function in service/internal/executor/arguments.go.

A improper neutralization of special elements used in an os command ('os command injection') vulnerability [CWE-78] in Fortinet FortiWeb CLI version 7.6.0 through 7.6.3 and before 7.4.8 allows a privileged attacker to execute arbitrary code or command via crafted CLI commands.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in Fortinet FortiWeb version 7.6.0 through 7.6.3, 7.4.0 through 7.4.7, 7.2.0 through 7.2.10 and before 7.0.10 allows an authenticated privileged attacker to execute unauthorized code or commands via crafted CLI commands

An improper neutralization of special elements used in an OS Command ("OS Command Injection") vulnerability [CWE-78] in Fortinet FortiADC version 7.2.0 and before 7.1.1 allows a remote and authenticated attacker with low privilege to execute unauthorized code via specifically crafted HTTP parameters.

An improper neutralization of special elements used in an OS command ('OS Command Injection') vulnerability [CWE-78] in Fortinet FortiSIEM version 7.3.0 through 7.3.1, 7.2.0 through 7.2.5, 7.1.0 through 7.1.7, 7.0.0 through 7.0.3 and before 6.7.9 allows an unauthenticated attacker to execute unauthorized code or commands via crafted CLI requests.

Openfiler v2.x contains a command injection vulnerability in the system.html page. The device parameter is used to instantiate a NetworkCard object, whose constructor in network.inc calls exec() with unsanitized input. An authenticated attacker can exploit this to execute arbitrary commands as the openfiler user. Due to misconfigured sudoers, the openfiler user can escalate privileges to root via sudo /bin/bash without a password.

ZEN Load Balancer versions 2.0 and 3.0-rc1 contain a command injection vulnerability in content2-2.cgi. The filelog parameter is passed directly into a backtick-delimited exec() call without sanitation. An authenticated attacker can inject arbitrary shell commands, resulting in remote code execution as the root user. ZEN Load Balancer is the predecessor of ZEVENET and SKUDONET. The affected versions (2.0 and 3.0-rc1) are no longer supported. SKUDONET CE is the current community-maintained successor.

PhpTax version 0.8 contains a remote code execution vulnerability in drawimage.php. The pfilez GET parameter is unsafely passed to the exec() function without sanitization. A remote attacker can inject arbitrary shell commands, leading to code execution under the web server's context. No authentication is required.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function sub_3517C of the file /goform/setWan. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function um_red of the file /goform/RP_setBasicAuto. The manipulation of the argument hname leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected is the function ipv6cmd of the file /goform/setIpv6. The manipulation of the argument Ipv6PriDns/Ipv6SecDns/Ipv6StaticGateway/LanIpv6Addr/LanPrefixLen/pppoeUser/pppoePass/pppoeIdleTime/pppoeRedialPeriod/Ipv6in4_PrefixLen/LocalIpv6/RemoteIpv4/LanIPv6_Prefix/LanPrefixLen/ipv6to4Relay/ipv6rdRelay/tunrd_PrefixLen/wan_UseLinkLocal/Ipv6StaticIp/Ipv6PrefixLen leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function um_inspect_cross_band of the file /goform/RP_setBasicAuto. The manipulation of the argument staticGateway leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This affects the function RP_setBasicAuto of the file /goform/RP_setBasicAuto. The manipulation of the argument staticIp/staticNetmask leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function setDeviceName of the file /goform/setDeviceName. The manipulation of the argument DeviceName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function RP_setBasic of the file /goform/RP_setBasic. The manipulation of the argument bssid leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function setDFSSetting of the file /goform/setLan. The manipulation of the argument lanNetmask/lanIp leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

WAN Emulator v2.3 contains two unauthenticated command execution vulnerabilities. The result.php script calls shell_exec() with unsanitized input from the pc POST parameter, allowing remote attackers to execute arbitrary commands as the www-data user. The system also includes a SUID-root binary named dosu, which is vulnerable to command injection via its first argument. An attacker can exploit both flaws in sequence to achieve full remote code execution and escalate privileges to root.

The E-Mail Security Virtual Appliance (ESVA) (tested on version ESVA_2057) contains an unauthenticated command injection vulnerability in the learn-msg.cgi script. The CGI handler fails to sanitize user-supplied input passed via the id parameter, allowing attackers to inject arbitrary shell commands. Exploitation requires no authentication and results in full command execution on the underlying system.

An unauthenticated remote command execution vulnerability exists in AjaXplorer (now known as Pydio Cells) versions prior to 2.6. The flaw resides in the checkInstall.php script within the access.ssh plugin, which fails to properly sanitize user-supplied input to the destServer GET parameter. By injecting shell metacharacters, remote attackers can execute arbitrary system commands on the server with the privileges of the web server process.

MiR software versions prior to version 3.0.0 are affected by a command injection vulnerability. A malicious HTTP request crafted by an authenticated user could allow the execution of arbitrary commands on the underlying operating system.

Powered BLUE 870 versions 0.20130927 and prior contain an OS command injection vulnerability. If this vulnerability is exploited, arbitrary OS commands may be executed on the affected product.

A vulnerability was found in agentUniverse up to 0.0.18 and classified as critical. This issue affects the function StdioServerParameters of the component MCPSessionManager/MCPTool/MCPToolkit. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An unauthenticated OS command injection vulnerability exists in the Shenzhen Aitemi M300 Wi-Fi Repeater (hardware model MT02). When configuring the device in WISP mode, the 'ssid' parameter is passed unsanitized to system-level scripts. This allows remote attackers within Wi-Fi range to inject arbitrary shell commands that execute as root, resulting in full device compromise.

A command injection vulnerability affects the Shenzhen Aitemi M300 Wi-Fi Repeater (hardware model MT02) during WPA2 configuration. The 'key' parameter is interpreted directly by the system shell, enabling attackers to execute arbitrary commands as root. Exploitation requires no authentication and can be triggered during wireless setup.

The PPPoE configuration interface of the Shenzhen Aitemi M300 Wi-Fi Repeater (hardware model MT02) is vulnerable to command injection via the 'user' parameter. Input is processed unsafely during network setup, allowing attackers to execute arbitrary system commands with root privileges.

A command injection vulnerability exists in the 'passwd' parameter of the PPPoE setup process on the Shenzhen Aitemi M300 Wi-Fi Repeater (hardware model MT02). The input is passed directly to system-level commands without sanitation, enabling unauthenticated attackers to achieve root-level code execution.