Webkul QloApps v1.6.1 exposes authentication tokens in URLs during redirection. When users access the admin panel or other protected areas, the application appends sensitive authentication tokens directly to the URL.

Brocade SANnav OVA before SANnav 2.3.1b enables SHA1 deprecated setting for SSH for port 22.

Brocade SANnav before SANnav 2.3.1b enables weak TLS ciphers on ports 443 and 18082. In case of a successful exploit, an attacker can read Brocade SANnav data stream that includes monitored Brocade Fabric OS switches performance data, port status, zoning information, WWNs, IP Addresses, but no customer data, no personal data and no secrets or passwords, as it travels across the network.

The Mojave Inverter uses the GET method for sensitive information.

A CWE-598 “Use of GET Request Method with Sensitive Query Strings” was discovered affecting the 130.8005 TCP/IP Gateway running firmware version 12h. Both the SHA-1 hash of the password as well as the session tokens are included as part of the URL and therefore exposed to information leakage scenarios. An attacker capable of accessing such values (e.g., victim browser, network traffic inspection) can exploit this vulnerability to leak both the password hash as well as session tokens and bypass the authentication mechanism using a pass-the-hash attack.

A CWE-321 "Use of Hard-coded Cryptographic Key" in the JWT signing in Q-Free MaxTime less than or equal to version 2.11.0 allows an unauthenticated remote attacker to bypass the authentication via crafted HTTP requests.

The Temporal api-go library prior to version 1.44.1 did not send `update response` information to Data Converter when the proxy package within the api-go module was used in a gRPC proxy prior to transmission. This resulted in information contained within the `update response` field not having Data Converter transformations (e.g. encryption) applied. This is an issue only when using the UpdateWorkflowExecution APIs (released on 13th January 2025) with a proxy leveraging the api-go library before version 1.44.1. Other data fields were correctly sent to Data Converter. This issue does not impact the Data Converter server. Data was encrypted in transit. Temporal Cloud services are not impacted.

A use of hard-coded cryptographic key to encrypt sensitive data vulnerability [CWE-321] in FortiManager 7.6.0 through 7.6.1, 7.4.0 through 7.4.5, 7.2.0 through 7.2.9, 7.0 all versions, 6.4 all versions may allow an attacker with JSON API access permissions to decrypt some secrets even if the 'private-data-encryption' setting is enabled.

A hardcoded key in Ivanti Connect Secure before version 22.7R2.3 and Ivanti Policy Secure before version 22.7R1.3 allows a local authenticated attacker with admin privileges to read sensitive data.

A vulnerability has been identified in APOGEE PXC Series (BACnet) (All versions), APOGEE PXC Series (P2 Ethernet) (All versions), TALON TC Series (BACnet) (All versions). Affected devices contain a weak encryption mechanism based on a hard-coded key. This could allow an attacker to guess or decrypt the password from the cyphertext.

SolarWinds Web Help Desk was found to have a hardcoded cryptographic key that could allow the disclosure of sensitive information from the software.

This vulnerability exists in Tapo C500 Wi-Fi camera due to hard-coded RSA private key embedded within the device firmware. An attacker with physical access could exploit this vulnerability to obtain cryptographic private keys which can then be used to perform impersonation, data decryption and man in the middle attacks on the targeted device.

An issue was discovered in AudioCodes One Voice Operations Center (OVOC) before 8.4.582. Due to the use of a hard-coded key, an attacker is able to decrypt sensitive data such as passwords extracted from the topology file.

An issue was discovered in AudioCodes Mediant Session Border Controller (SBC) before 7.40A.501.841. Due to the use of weak password obfuscation/encryption, an attacker with access to configuration exports (INI) is able to decrypt the passwords.

Successful exploitation of this vulnerability could allow an attacker (who needs to have Admin access privileges) to read hardcoded AES passphrase, which may be used for decryption of certain data within backup files of 2N Access Commander version 1.14 and older. 2N has released an updated version 3.3 of 2N Access Commander, where this vulnerability is mitigated. It is recommended that all customers update 2N Access Commander to the latest version.

IBM ApplinX 11.1 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

Dell PowerProtect DD, versions prior to DDOS 8.3.0.0, 7.10.1.50, and 7.13.1.10 contains a use of a Cryptographic Primitive with a Risky Implementation vulnerability. A remote attacker could potentially exploit this vulnerability, leading to Information tampering.

Due to reliance on a trivial substitution cipher, sent in cleartext, and the reliance on a default password when the user does not set a password, the Remote Mouse Server by Emote Interactive can be abused by attackers to inject OS commands over theproduct's custom control protocol. A Metasploit module was written and tested against version 4.110, the current version when this CVE was reserved.

A vulnerability classified as problematic has been found in TP-Link TL-SG108E 1.0.0 Build 20201208 Rel. 40304. Affected is an unknown function of the file /usr_account_set.cgi of the component HTTP GET Request Handler. The manipulation of the argument username/password leads to use of get request method with sensitive query strings. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 1.0.0 Build 20250124 Rel. 54920(Beta) is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early. They reacted very professional and provided a pre-fix version for their customers.

IBM MQ Container 3.0.0, 3.0.1, 3.1.0 through 3.1.3 CD, 2.0.0 LTS through 2.0.22 LTS and 2.4.0 through 2.4.8, 2.3.0 through 2.3.3, 2.2.0 through 2.2.2 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Storage Protect for Virtual Environments: Data Protection for VMware and Storage Protect Backup-Archive Client 8.1.0.0 through 8.1.23.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Storage Defender 2.0.0 through 2.0.7 on-prem defender-sensor-cmd CLI could allow a remote attacker to obtain sensitive information, caused by sending network requests over an insecure channel. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

In illumos illumos-gate 2024-02-15, an error occurs in the elliptic curve point addition algorithm that uses mixed Jacobian-affine coordinates, causing the algorithm to yield a result of POINT_AT_INFINITY when it should not. A man-in-the-middle attacker could use this to interfere with a connection, resulting in an attacked party computing an incorrect shared secret.

IBM Concert Software 1.0.0 and 1.0.1 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

ECOVACS robot lawn mowers and vacuums use a shared, static secret key to encrypt BLE GATT messages. An unauthenticated attacker within BLE range can control any robot using the same key.

ECOVACS robot lawnmowers and vacuums use a deterministic symmetric key to decrypt firmware updates. An attacker can create and encrypt malicious firmware that will be successfully decrypted and installed by the robot.

Weak encryption algorithm in Easy-RSA version 3.0.5 through 3.1.7 allows a local attacker to more easily bruteforce the private CA key when created using OpenSSL 3

IBM DevOps Velocity 5.0.0 and IBM UrbanCode Velocity 4.0.0 through 4.0. 25 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

A vulnerability exists in Algo Edge up to 2.1.1 - a previously used (legacy) component of navify® Algorithm Suite. The vulnerability impacts the authentication mechanism of this component and could allow an attacker with adjacent access to the laboratory network and the Algo Edge system to craft valid authentication tokens and access the component. Other components of navify® Algorithm Suite are not affected.

A “Use of a Broken or Risky Cryptographic Algorithm” vulnerability in the SSL/TLS component used in B&R Automation Runtime versions before 6.1 and B&R mapp View versions before 6.1 may be abused by unauthenticated network-based attackers to masquerade as services on impacted devices.

Windows Line Printer Daemon (LPD) Service Remote Code Execution Vulnerability

Windows Remote Desktop Services Remote Code Execution Vulnerability

Microsoft Digest Authentication Remote Code Execution Vulnerability

A use of hard-coded cryptographic key in Fortinet FortiClientWindows version 7.4.0, 7.2.x all versions, 7.0.x all versions, and 6.4.x all versions may allow a low-privileged user to decrypt interprocess communication via monitoring named piped.

A use of hard-coded cryptographic key in Fortinet FortiSwitch version 7.4.0 and 7.2.0 through 7.2.5 and 7.0.0 through 7.0.7 and 6.4.0 through 6.4.13 and 6.2.0 through 6.2.7 and 6.0.0 through 6.0.7 allows attacker to execute unauthorized code or commands via crafted requests.

IBM Robotic Process Automation 21.0.0 through 21.0.7.19 and 23.0.0 through 23.0.19 could allow a remote attacker to obtain sensitive data that may be exposed through certain crypto-analytic attacks.

On Arista CloudVision Appliance (CVA) affected releases running on appliances that support hardware disk encryption (DCA-350E-CV only), the disk encryption might not be successfully performed. This results in the disks remaining unsecured and data on them

Access control vulnerability in the identity authentication module Impact: Successful exploitation of this vulnerability may affect service confidentiality.

IBM Concert Software 1.0.0, 1.0.1, 1.0.2, 1.0.2.1, and 1.0.3 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

IBM Engineering Lifecycle Optimization - Publishing 7.0.2 and 7.0.3 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

An issue was discovered in Optimizely Configured Commerce before 5.2.2408. A medium-severity issue exists in requests for resources where the session token is submitted as a URL parameter. This exposes information about the authenticated session, which can be leveraged for session hijacking.

Smadar SPS – CWE-327: Use of a Broken or Risky Cryptographic Algorithm

Weak algorithm used to sign RPM package. The following products are affected: Acronis Cyber Protect Cloud Agent (Linux) before build 39185, Acronis Cyber Protect 16 (Linux) before build 39938.

Dell RecoverPoint for VMs, version(s) 6.0.x contain(s) a Use of a Broken or Risky Cryptographic Algorithm vulnerability in the SSH. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Remote execution.

beego is an open-source web framework for the Go programming language. Versions of beego prior to 2.3.4 use MD5 as a hashing algorithm. MD5 is no longer considered secure against well-funded opponents due to its vulnerability to collision attacks. Version 2.3.4 replaces MD5 with SHA256.

ESPTouch is a connection protocol for internet of things devices. In the ESPTouchV2 protocol, while there is an option to use a custom AES key, there is no option to set the IV (Initialization Vector) prior to versions 5.3.2, 5.2.4, 5.1.6, and 5.0.8. The IV is set to zero and remains constant throughout the product's lifetime. In AES/CBC mode, if the IV is not properly initialized, the encrypted output becomes deterministic, leading to potential data leakage. To address the aforementioned issues, the application generates a random IV when activating the AES key starting in versions 5.3.2, 5.2.4, 5.1.6, and 5.0.8. This IV is then transmitted along with the provision data to the provision device. The provision device has also been equipped with a parser for the AES IV. The upgrade is applicable for all applications and users of ESPTouch v2 component from ESP-IDF. As it is implemented in the ESP Wi-Fi stack, there is no workaround for the user to fix the application layer without upgrading the underlying firmware.

IBM Aspera Faspex 5.0.0 through 5.0.7 could allow a local user to obtain sensitive information due to improper encryption of certain data.

Sensitive data storage in improperly locked memory in Windows Remote Desktop Services allows an unauthorized attacker to execute code over a network.

Windows PrintWorkflowUserSvc Elevation of Privilege Vulnerability

Windows Remote Desktop Services Remote Code Execution Vulnerability

Windows Local Security Authority Subsystem Service (LSASS) Remote Code Execution Vulnerability