In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Add check for mgmt_alloc_skb() in mgmt_device_connected() Add check for the return value of mgmt_alloc_skb() in mgmt_device_connected() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: arm: pgtable: fix NULL pointer dereference issue When update_mmu_cache_range() is called by update_mmu_cache(), the vmf parameter is NULL, which will cause a NULL pointer dereference issue in adjust_pte(): Unable to handle kernel NULL pointer dereference at virtual address 00000030 when read Hardware name: Atmel AT91SAM9 PC is at update_mmu_cache_range+0x1e0/0x278 LR is at pte_offset_map_rw_nolock+0x18/0x2c Call trace: update_mmu_cache_range from remove_migration_pte+0x29c/0x2ec remove_migration_pte from rmap_walk_file+0xcc/0x130 rmap_walk_file from remove_migration_ptes+0x90/0xa4 remove_migration_ptes from migrate_pages_batch+0x6d4/0x858 migrate_pages_batch from migrate_pages+0x188/0x488 migrate_pages from compact_zone+0x56c/0x954 compact_zone from compact_node+0x90/0xf0 compact_node from kcompactd+0x1d4/0x204 kcompactd from kthread+0x120/0x12c kthread from ret_from_fork+0x14/0x38 Exception stack(0xc0d8bfb0 to 0xc0d8bff8) To fix it, do not rely on whether 'ptl' is equal to decide whether to hold the pte lock, but decide it by whether CONFIG_SPLIT_PTE_PTLOCKS is enabled. In addition, if two vmas map to the same PTE page, there is no need to hold the pte lock again, otherwise a deadlock will occur. Just add the need_lock parameter to let adjust_pte() know this information.

In the Linux kernel, the following vulnerability has been resolved: net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device ethnl_req_get_phydev() is used to lookup a phy_device, in the case an ethtool netlink command targets a specific phydev within a netdev's topology. It takes as a parameter a const struct nlattr *header that's used for error handling : if (!phydev) { NL_SET_ERR_MSG_ATTR(extack, header, "no phy matching phyindex"); return ERR_PTR(-ENODEV); } In the notify path after a ->set operation however, there's no request attributes available. The typical callsite for the above function looks like: phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_XXX_HEADER], info->extack); So, when tb is NULL (such as in the ethnl notify path), we have a nice crash. It turns out that there's only the PLCA command that is in that case, as the other phydev-specific commands don't have a notification. This commit fixes the crash by passing the cmd index and the nlattr array separately, allowing NULL-checking it directly inside the helper.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Fix NULL pointer access Resources should be released only after all threads that utilize them have been destroyed. This commit ensures that resources are not released prematurely by waiting for the associated workqueue to complete before deallocating them.

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: Flush the notify_hotplug_work When performing continuous unbind/bind operations on the USB drivers available on the Renesas RZ/G2L SoC, a kernel crash with the message "Unable to handle kernel NULL pointer dereference at virtual address" may occur. This issue points to the usbhsc_notify_hotplug() function. Flush the delayed work to avoid its execution when driver resources are unavailable.

In the Linux kernel, the following vulnerability has been resolved: caif_virtio: fix wrong pointer check in cfv_probe() del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked for NULL before calling it, not cfv->vdev. Also the current implementation is redundant because the pointer cfv->vdev is dereferenced before it is checked for NULL. Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before calling del_vqs().

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Add sanity checks on rdev validity There is a possibility that ulp_irq_stop and ulp_irq_start callbacks will be called when the device is in detached state. This can cause a crash due to NULL pointer dereference as the rdev is already freed.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix bad hist from corrupting named_triggers list The following commands causes a crash: ~# cd /sys/kernel/tracing/events/rcu/rcu_callback ~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=bad:keys=common_pid' > trigger Because the following occurs: event_trigger_write() { trigger_process_regex() { event_hist_trigger_parse() { data = event_trigger_alloc(..); event_trigger_register(.., data) { cmd_ops->reg(.., data, ..) [hist_register_trigger()] { data->ops->init() [event_hist_trigger_init()] { save_named_trigger(name, data) { list_add(&data->named_list, &named_triggers); } } } } ret = create_actions(); (return -EINVAL) if (ret) goto out_unreg; [..] ret = hist_trigger_enable(data, ...) { list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!) [..] out_unreg: event_hist_unregister(.., data) { cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] { list_for_each_entry(iter, &file->triggers, list) { if (!hist_trigger_match(data, iter, named_data, false)) <- never matches continue; [..] test = iter; } if (test && test->ops->free) <<<-- test is NULL test->ops->free(test) [event_hist_trigger_free()] { [..] if (data->name) del_named_trigger(data) { list_del(&data->named_list); <<<<-- NEVER gets removed! } } } } [..] kfree(data); <<<-- frees item but it is still on list The next time a hist with name is registered, it causes an u-a-f bug and the kernel can crash. Move the code around such that if event_trigger_register() succeeds, the next thing called is hist_trigger_enable() which adds it to the list. A bunch of actions is called if get_named_trigger_data() returns false. But that doesn't need to be called after event_trigger_register(), so it can be moved up, allowing event_trigger_register() to be called just before hist_trigger_enable() keeping them together and allowing the file->triggers to be properly populated.

A logic error was addressed with improved error handling. This issue is fixed in visionOS 2.4, macOS Ventura 13.7.5, tvOS 18.4, iPadOS 17.7.6, iOS 18.4 and iPadOS 18.4, macOS Sequoia 15.4, macOS Sonoma 14.7.5. Parsing an image may lead to disclosure of user information.

A vulnerability, which was classified as problematic, has been found in Khronos Group glslang 15.1.0. Affected by this issue is the function glslang::TIntermediate::isConversionAllowed of the file glslang/MachineIndependent/Intermediate.cpp. The manipulation leads to null pointer dereference. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used.

A vulnerability classified as problematic has been found in TRENDnet TEW-637AP and TEW-638APB 1.2.7/1.3.0.106. This affects the function sub_41DED0 of the file /bin/goahead of the component HTTP Request Handler. The manipulation leads to null pointer dereference. Access to the local network is required for this attack. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in TRENDnet TEW-410APB 1.3.06b. It has been rated as problematic. Affected by this issue is the function sub_4019A0 of the file /usr/sbin/httpd of the component HTTP Request Handler. The manipulation leads to null pointer dereference. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in TRENDnet TEW-411BRP+ 2.07. It has been classified as problematic. Affected is the function sub_401DB0 of the file /usr/sbin/httpd of the component HTTP Request Handler. The manipulation leads to null pointer dereference. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in TRENDnet TI-G102i 1.0.7.S0_ /1.0.8.S0_ and classified as problematic. This issue affects the function plugins_call_handle_uri_raw of the file /usr/sbin/lighttpd of the component HTTP Request Handler. The manipulation leads to null pointer dereference. The attack can only be done within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in HDF5 up to 1.14.6 and classified as problematic. This issue affects the function H5O__cache_chk_serialize of the file src/H5Ocache.c. The manipulation leads to null pointer dereference. An attack has to be approached locally. The exploit has been disclosed to the public and may be used.

Segmentation fault in fig2dev in version 3.2.9a allows an attacker to availability via local input manipulation via put_patternarc function.

Null Pointer Dereference vulnerability in libarchive 3.7.6 and earlier when running program bsdtar in function header_pax_extension at rchive_read_support_format_tar.c:1844:8.

In the Linux kernel, the following vulnerability has been resolved: HID: betop: check shape of output reports betopff_init() only checks the total sum of the report counts for each report field to be at least 4, but hid_betopff_play() expects 4 report fields. A device advertising an output report with one field and 4 report counts would pass the check but crash the kernel with a NULL pointer dereference in hid_betopff_play().

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: enable all safety features by default In the original implementation of dwmac5 commit 8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features") all safety features were enabled by default. Later it seems some implementations didn't have support for all the features, so in commit 5ac712dcdfef ("net: stmmac: enable platform specific safety features") the safety_feat_cfg structure was added to the callback and defined for some platforms to selectively enable these safety features. The problem is that only certain platforms were given that software support. If the automotive safety package bit is set in the hardware features register the safety feature callback is called for the platform, and for platforms that didn't get a safety_feat_cfg defined this results in the following NULL pointer dereference: [ 7.933303] Call trace: [ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac] [ 7.941455] __stmmac_open+0x16c/0x474 [stmmac] [ 7.946117] stmmac_open+0x38/0x70 [stmmac] [ 7.950414] __dev_open+0x100/0x1dc [ 7.954006] __dev_change_flags+0x18c/0x204 [ 7.958297] dev_change_flags+0x24/0x6c [ 7.962237] do_setlink+0x2b8/0xfa4 [ 7.965827] __rtnl_newlink+0x4ec/0x840 [ 7.969766] rtnl_newlink+0x50/0x80 [ 7.973353] rtnetlink_rcv_msg+0x12c/0x374 [ 7.977557] netlink_rcv_skb+0x5c/0x130 [ 7.981500] rtnetlink_rcv+0x18/0x2c [ 7.985172] netlink_unicast+0x2e8/0x340 [ 7.989197] netlink_sendmsg+0x1a8/0x420 [ 7.993222] ____sys_sendmsg+0x218/0x280 [ 7.997249] ___sys_sendmsg+0xac/0x100 [ 8.001103] __sys_sendmsg+0x84/0xe0 [ 8.004776] __arm64_sys_sendmsg+0x24/0x30 [ 8.008983] invoke_syscall+0x48/0x114 [ 8.012840] el0_svc_common.constprop.0+0xcc/0xec [ 8.017665] do_el0_svc+0x38/0xb0 [ 8.021071] el0_svc+0x2c/0x84 [ 8.024212] el0t_64_sync_handler+0xf4/0x120 [ 8.028598] el0t_64_sync+0x190/0x194 Go back to the original behavior, if the automotive safety package is found to be supported in hardware enable all the features unless safety_feat_cfg is passed in saying this particular platform only supports a subset of the features.

In the Linux kernel, the following vulnerability has been resolved: trace_events_hist: add check for return value of 'create_hist_field' Function 'create_hist_field' is called recursively at trace_events_hist.c:1954 and can return NULL-value that's why we have to check it to avoid null pointer dereference. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: acpi: Fix suspend with Xen PV Commit f1e525009493 ("x86/boot: Skip realmode init code when running as Xen PV guest") missed one code path accessing real_mode_header, leading to dereferencing NULL when suspending the system under Xen: [ 348.284004] PM: suspend entry (deep) [ 348.289532] Filesystems sync: 0.005 seconds [ 348.291545] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 348.292457] OOM killer disabled. [ 348.292462] Freezing remaining freezable tasks ... (elapsed 0.104 seconds) done. [ 348.396612] printk: Suspending console(s) (use no_console_suspend to debug) [ 348.749228] PM: suspend devices took 0.352 seconds [ 348.769713] ACPI: EC: interrupt blocked [ 348.816077] BUG: kernel NULL pointer dereference, address: 000000000000001c [ 348.816080] #PF: supervisor read access in kernel mode [ 348.816081] #PF: error_code(0x0000) - not-present page [ 348.816083] PGD 0 P4D 0 [ 348.816086] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 348.816089] CPU: 0 PID: 6764 Comm: systemd-sleep Not tainted 6.1.3-1.fc32.qubes.x86_64 #1 [ 348.816092] Hardware name: Star Labs StarBook/StarBook, BIOS 8.01 07/03/2022 [ 348.816093] RIP: e030:acpi_get_wakeup_address+0xc/0x20 Fix that by adding an optional acpi callback allowing to skip setting the wakeup address, as in the Xen PV case this will be handled by the hypervisor anyway.

In the Linux kernel, the following vulnerability has been resolved: x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL Baoquan reported that after triggering a crash the subsequent crash-kernel fails to boot about half of the time. It triggers a NULL pointer dereference in the periodic tick code. This happens because the legacy timer interrupt (IRQ0) is resent in software which happens in soft interrupt (tasklet) context. In this context get_irq_regs() returns NULL which leads to the NULL pointer dereference. The reason for the resend is a spurious APIC interrupt on the IRQ0 vector which is captured and leads to a resend when the legacy timer interrupt is enabled. This is wrong because the legacy PIC interrupts are level triggered and therefore should never be resent in software, but nothing ever sets the IRQ_LEVEL flag on those interrupts, so the core code does not know about their trigger type. Ensure that IRQ_LEVEL is set when the legacy PCI interrupts are set up.

In the Linux kernel, the following vulnerability has been resolved: net: fix NULL pointer in skb_segment_list Commit 3a1296a38d0c ("net: Support GRO/GSO fraglist chaining.") introduced UDP listifyed GRO. The segmentation relies on frag_list being untouched when passing through the network stack. This assumption can be broken sometimes, where frag_list itself gets pulled into linear area, leaving frag_list being NULL. When this happens it can trigger following NULL pointer dereference, and panic the kernel. Reverse the test condition should fix it. [19185.577801][ C1] BUG: kernel NULL pointer dereference, address: ... [19185.663775][ C1] RIP: 0010:skb_segment_list+0x1cc/0x390 ... [19185.834644][ C1] Call Trace: [19185.841730][ C1] <TASK> [19185.848563][ C1] __udp_gso_segment+0x33e/0x510 [19185.857370][ C1] inet_gso_segment+0x15b/0x3e0 [19185.866059][ C1] skb_mac_gso_segment+0x97/0x110 [19185.874939][ C1] __skb_gso_segment+0xb2/0x160 [19185.883646][ C1] udp_queue_rcv_skb+0xc3/0x1d0 [19185.892319][ C1] udp_unicast_rcv_skb+0x75/0x90 [19185.900979][ C1] ip_protocol_deliver_rcu+0xd2/0x200 [19185.910003][ C1] ip_local_deliver_finish+0x44/0x60 [19185.918757][ C1] __netif_receive_skb_one_core+0x8b/0xa0 [19185.927834][ C1] process_backlog+0x88/0x130 [19185.935840][ C1] __napi_poll+0x27/0x150 [19185.943447][ C1] net_rx_action+0x27e/0x5f0 [19185.951331][ C1] ? mlx5_cq_tasklet_cb+0x70/0x160 [mlx5_core] [19185.960848][ C1] __do_softirq+0xbc/0x25d [19185.968607][ C1] irq_exit_rcu+0x83/0xb0 [19185.976247][ C1] common_interrupt+0x43/0xa0 [19185.984235][ C1] asm_common_interrupt+0x22/0x40 ... [19186.094106][ C1] </TASK>

In the Linux kernel, the following vulnerability has been resolved: net: phy: dp83822: Fix null pointer access on DP83825/DP83826 devices The probe() function is only used for the DP83822 PHY, leaving the private data pointer uninitialized for the smaller DP83825/26 models. While all uses of the private data structure are hidden in 82822 specific callbacks, configuring the interrupt is shared across all models. This causes a NULL pointer dereference on the smaller PHYs as it accesses the private data unchecked. Verifying the pointer avoids that.

In the Linux kernel, the following vulnerability has been resolved: efi: fix potential NULL deref in efi_mem_reserve_persistent When iterating on a linked list, a result of memremap is dereferenced without checking it for NULL. This patch adds a check that falls back on allocating a new page in case memremap doesn't succeed. Found by Linux Verification Center (linuxtesting.org) with SVACE. [ardb: return -ENOMEM instead of breaking out of the loop]

In the Linux kernel, the following vulnerability has been resolved: reset: uniphier-glue: Fix possible null-ptr-deref It will cause null-ptr-deref when resource_size(res) invoked, if platform_get_resource() returns NULL.

In the Linux kernel, the following vulnerability has been resolved: phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe() sp_usb_phy_probe() will call platform_get_resource_byname() that may fail and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as input, which may causes null-ptr-deref. Check the ret value of platform_get_resource_byname() to avoid the null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: mm: memcg: fix NULL pointer in mem_cgroup_track_foreign_dirty_slowpath() As commit 18365225f044 ("hwpoison, memcg: forcibly uncharge LRU pages"), hwpoison will forcibly uncharg a LRU hwpoisoned page, the folio_memcg could be NULl, then, mem_cgroup_track_foreign_dirty_slowpath() could occurs a NULL pointer dereference, let's do not record the foreign writebacks for folio memcg is null in mem_cgroup_track_foreign_dirty() to fix it.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Don't attempt to resume the ports before they exist This will fix null pointer dereference that was caused by the driver attempting to resume ports that were not yet registered.

A flaw was found in gnuplot. The X11_graphics() function may lead to a segmentation fault and cause a system crash.

A flaw was found in gnuplot. The CANVAS_text() function may lead to a segmentation fault and cause a system crash.

A flaw was found in gnuplot. The xstrftime() function may lead to a segmentation fault, causing a system crash.

A flaw was found in gnuplot. The GetAnnotateString() function may lead to a segmentation fault and cause a system crash.

A flaw was found in gnuplot. The plot3d_points() function may lead to a segmentation fault and cause a system crash.

In the Linux kernel, the following vulnerability has been resolved: drm/fbdev-dma: Add shadow buffering for deferred I/O DMA areas are not necessarily backed by struct page, so we cannot rely on it for deferred I/O. Allocate a shadow buffer for drivers that require deferred I/O and use it as framebuffer memory. Fixes driver errors about being "Unable to handle kernel NULL pointer dereference at virtual address" or "Unable to handle kernel paging request at virtual address". The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial allocation, which creates the DMA-backed buffer object, and a tail that sets up the fbdev data structures. There is a tail function for direct memory mappings and a tail function for deferred I/O with the shadow buffer. It is no longer possible to use deferred I/O without shadow buffer. It can be re-added if there exists a reliably test for usable struct page in the allocated DMA-backed buffer object.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers Other, non DAI copier widgets could have the same stream name (sname) as the ALH copier and in that case the copier->data is NULL, no alh_data is attached, which could lead to NULL pointer dereference. We could check for this NULL pointer in sof_ipc4_prepare_copier_module() and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai() will miscalculate the ALH device count, causing broken audio. The correct fix is to harden the matching logic by making sure that the 1. widget is a DAI widget - so dai = w->private is valid 2. the dai (and thus the copier) is ALH copier

A vulnerability exists in RTU500 IEC 60870-4-104 controlled station functionality, that allows an authenticated and authorized attacker to perform a CMU restart. The vulnerability can be triggered if certificates are updated while in use on active connections. The affected CMU will automatically recover itself if an attacker successfully exploits this vulnerability.

A vulnerability exists in the RTU500 web server component that can cause a denial of service to the RTU500 CMU application if a specially crafted message sequence is executed on a WebSocket connection. An attacker must be properly authenticated and the test mode function of RTU500 must be enabled to exploit this vulnerability. The affected CMU will automatically recover itself if an attacker successfully exploits this vulnerability.

A vulnerability has been found in Hercules Augeas 1.14.1 and classified as problematic. This vulnerability affects the function re_case_expand of the file src/fa.c. The manipulation of the argument re leads to null pointer dereference. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used.

A vulnerability in ollama/ollama versions <=0.3.14 allows a malicious user to create a customized GGUF model file that, when uploaded and created on the Ollama server, can cause a crash due to an unchecked null pointer dereference. This can lead to a Denial of Service (DoS) attack via remote network.

A flaw was found in the 389-ds-base LDAP Server. This issue occurs when issuing a Modify DN LDAP operation through the ldap protocol, when the function return value is not tested and a NULL pointer is dereferenced. If a privileged user performs a ldap MODDN operation after a failed operation, it could lead to a Denial of Service (DoS) or system crash.

Zincati is an auto-update agent for Fedora CoreOS hosts. Zincati ships a polkit rule which allows the `zincati` system user to use the actions `org.projectatomic.rpmostree1.deploy` to deploy updates to the system and `org.projectatomic.rpmostree1.finalize-deployment` to reboot the system into the deployed update. Since Zincati v0.0.24, this polkit rule contains a logic error which broadens access of those polkit actions to any unprivileged user rather than just the `zincati` system user. In practice, this means that any unprivileged user with access to the system D-Bus socket is able to deploy older Fedora CoreOS versions (which may have other known vulnerabilities). Note that rpm-ostree enforces that the selected version must be from the same branch the system is currently on so this cannot directly be used to deploy an attacker-controlled update payload. This primarily impacts users running untrusted workloads with access to the system D-Bus socket. Note that in general, untrusted workloads should not be given this access, whether containerized or not. By default, containers do not have access to the system D-Bus socket. The logic error is fixed in Zincati v0.0.30. A workaround is to manually add a following polkit rule, instructions for which are available in the GitHub Security Advisory.

A flaw was found in Keylime, a remote attestation solution, where strict type checking introduced in version 7.12.0 prevents the registrar from reading database entries created by previous versions, for example, 7.11.0. Specifically, older versions store agent registration data as bytes, whereas the updated registrar expects str. This issue leads to an exception when processing agent registration requests, causing the agent to fail.

In the Linux kernel, the following vulnerability has been resolved: tcp: drop secpath at the same time as we currently drop dst Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while running tests that boil down to: - create a pair of netns - run a basic TCP test over ipcomp6 - delete the pair of netns The xfrm_state found on spi_byaddr was not deleted at the time we delete the netns, because we still have a reference on it. This lingering reference comes from a secpath (which holds a ref on the xfrm_state), which is still attached to an skb. This skb is not leaked, it ends up on sk_receive_queue and then gets defer-free'd by skb_attempt_defer_free. The problem happens when we defer freeing an skb (push it on one CPU's defer_list), and don't flush that list before the netns is deleted. In that case, we still have a reference on the xfrm_state that we don't expect at this point. We already drop the skb's dst in the TCP receive path when it's no longer needed, so let's also drop the secpath. At this point, tcp_filter has already called into the LSM hooks that may require the secpath, so it should not be needed anymore. However, in some of those places, the MPTCP extension has just been attached to the skb, so we cannot simply drop all extensions.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix error handling causing NULL dereference tcf_exts_miss_cookie_base_alloc() calls xa_alloc_cyclic() which can return 1 if the allocation succeeded after wrapping. This was treated as an error, with value 1 returned to caller tcf_exts_init_ex() which sets exts->actions to NULL and returns 1 to caller fl_change(). fl_change() treats err == 1 as success, calling tcf_exts_validate_ex() which calls tcf_action_init() with exts->actions as argument, where it is dereferenced. Example trace: BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 114 PID: 16151 Comm: handler114 Kdump: loaded Not tainted 5.14.0-503.16.1.el9_5.x86_64 #1 RIP: 0010:tcf_action_init+0x1f8/0x2c0 Call Trace: tcf_action_init+0x1f8/0x2c0 tcf_exts_validate_ex+0x175/0x190 fl_change+0x537/0x1120 [cls_flower]

In the Linux kernel, the following vulnerability has been resolved: sockmap, vsock: For connectible sockets allow only connected sockmap expects all vsocks to have a transport assigned, which is expressed in vsock_proto::psock_update_sk_prot(). However, there is an edge case where an unconnected (connectible) socket may lose its previously assigned transport. This is handled with a NULL check in the vsock/BPF recv path. Another design detail is that listening vsocks are not supposed to have any transport assigned at all. Which implies they are not supported by the sockmap. But this is complicated by the fact that a socket, before switching to TCP_LISTEN, may have had some transport assigned during a failed connect() attempt. Hence, we may end up with a listening vsock in a sockmap, which blows up quickly: KASAN: null-ptr-deref in range [0x0000000000000120-0x0000000000000127] CPU: 7 UID: 0 PID: 56 Comm: kworker/7:0 Not tainted 6.14.0-rc1+ Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:vsock_read_skb+0x4b/0x90 Call Trace: sk_psock_verdict_data_ready+0xa4/0x2e0 virtio_transport_recv_pkt+0x1ca8/0x2acc vsock_loopback_work+0x27d/0x3f0 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x35a/0x700 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 For connectible sockets, instead of relying solely on the state of vsk->transport, tell sockmap to only allow those representing established connections. This aligns with the behaviour for AF_INET and AF_UNIX.

In the Linux kernel, the following vulnerability has been resolved: net: Add rx_skb of kfree_skb to raw_tp_null_args[]. Yan Zhai reported a BPF prog could trigger a null-ptr-deref [0] in trace_kfree_skb if the prog does not check if rx_sk is NULL. Commit c53795d48ee8 ("net: add rx_sk to trace_kfree_skb") added rx_sk to trace_kfree_skb, but rx_sk is optional and could be NULL. Let's add kfree_skb to raw_tp_null_args[] to let the BPF verifier validate such a prog and prevent the issue. Now we fail to load such a prog: libbpf: prog 'drop': -- BEGIN PROG LOAD LOG -- 0: R1=ctx() R10=fp0 ; int BPF_PROG(drop, struct sk_buff *skb, void *location, @ kfree_skb_sk_null.bpf.c:21 0: (79) r3 = *(u64 *)(r1 +24) func 'kfree_skb' arg3 has btf_id 5253 type STRUCT 'sock' 1: R1=ctx() R3_w=trusted_ptr_or_null_sock(id=1) ; bpf_printk("sk: %d, %d\n", sk, sk->__sk_common.skc_family); @ kfree_skb_sk_null.bpf.c:24 1: (69) r4 = *(u16 *)(r3 +16) R3 invalid mem access 'trusted_ptr_or_null_' processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0 -- END PROG LOAD LOG -- Note this fix requires commit 838a10bd2ebf ("bpf: Augment raw_tp arguments with PTR_MAYBE_NULL"). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000010 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 PREEMPT SMP RIP: 0010:bpf_prog_5e21a6db8fcff1aa_drop+0x10/0x2d Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x148/0x420 ? search_bpf_extables+0x5b/0x70 ? fixup_exception+0x27/0x2c0 ? exc_page_fault+0x75/0x170 ? asm_exc_page_fault+0x22/0x30 ? bpf_prog_5e21a6db8fcff1aa_drop+0x10/0x2d bpf_trace_run4+0x68/0xd0 ? unix_stream_connect+0x1f4/0x6f0 sk_skb_reason_drop+0x90/0x120 unix_stream_connect+0x1f4/0x6f0 __sys_connect+0x7f/0xb0 __x64_sys_connect+0x14/0x20 do_syscall_64+0x47/0xc30 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In the Linux kernel, the following vulnerability has been resolved: nfp: bpf: Add check for nfp_app_ctrl_msg_alloc() Add check for the return value of nfp_app_ctrl_msg_alloc() in nfp_bpf_cmsg_alloc() to prevent null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: stream-ipc: Check for cstream nullity in sof_ipc_msg_data() The nullity of sps->cstream should be checked similarly as it is done in sof_set_stream_data_offset() function. Assuming that it is not NULL if sps->stream is NULL is incorrect and can lead to NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: acct: perform last write from workqueue In [1] it was reported that the acct(2) system call can be used to trigger NULL deref in cases where it is set to write to a file that triggers an internal lookup. This can e.g., happen when pointing acc(2) to /sys/power/resume. At the point the where the write to this file happens the calling task has already exited and called exit_fs(). A lookup will thus trigger a NULL-deref when accessing current->fs. Reorganize the code so that the the final write happens from the workqueue but with the caller's credentials. This preserves the (strange) permission model and has almost no regression risk. This api should stop to exist though.

In the Linux kernel, the following vulnerability has been resolved: smb: client: Add check for next_buffer in receive_encrypted_standard() Add check for the return value of cifs_buf_get() and cifs_small_buf_get() in receive_encrypted_standard() to prevent null pointer dereference.