A malicious client can bypass the client certificate trust check of an opc.https server when the server endpoint is configured to allow only secure communication.

IBM WebSphere Application Server 8.5 and 9.0 could provide weaker than expected security for TLS connections.

An insufficient validation on the server connection endpoint in Netskope Client allows local users to elevate privileges on the system. The insufficient validation allows Netskope Client to connect to any other server with Public Signed CA TLS certificates and send specially crafted responses to elevate privileges.

An insufficient certificate validation issue in the Palo Alto Networks GlobalProtect™ app enables attackers to connect the GlobalProtect app to arbitrary servers. This can enable a local non-administrative operating system user or an attacker on the same subnet to install malicious root certificates on the endpoint and subsequently install malicious software signed by the malicious root certificates on that endpoint.

F5 Access for Android before version 3.1.2 which uses HTTPS does not verify the remote endpoint identity. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A TLS vulnerability exists in the phone application used to manage a connected device. The phone application accepts self-signed certificates when establishing TLS communication which may result in man-in-the-middle attacks on untrusted networks. Captured communications may include user credentials and sensitive session tokens.

A vulnerability in the meeting-join functionality of Cisco Webex Meetings could have allowed an unauthenticated, network-proximate attacker to complete a meeting-join process in place of an intended targeted user, provided the requisite conditions were satisfied. Cisco has addressed this vulnerability in the Cisco Webex Meetings service, and no customer action is needed. This vulnerability existed due to client certificate validation issues. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by monitoring local wireless or adjacent networks for client-join requests and attempting to interrupt and complete the meeting-join flow as another user who was currently joining a meeting. To successfully exploit the vulnerability, an attacker would need the capability to position themselves in a local wireless or adjacent network, to monitor and intercept the targeted network traffic flows, and to satisfy timing requirements in order to interrupt the meeting-join flow and exploit the vulnerability. A successful exploit could have allowed the attacker to join the meeting as another user. However, the Cisco Product Security Incident Response Team (PSIRT) is not aware of any malicious use of the vulnerability that is described in this advisory.

The server identity check mechanism for firmware upgrade performed via command shell is insecurely implemented potentially allowing an attacker to perform a Man-in-the-middle attack. This security issue has been fixed in the latest version which is available on the Eaton download center.

Lack of TLS validation when downloading a CSV file including mapping from IPs to countries used ONLY for displaying country flags in logs

Authentication management vulnerability in the ArkWeb module. Impact: Successful exploitation of this vulnerability may affect service confidentiality.

A lack of SSL certificate validation in BlueStacks v5.20 allows attackers to execute a man-it-the-middle attack and obtain sensitive information.

Vault and Vault Enterprise (“Vault”) TLS certificate auth method did not correctly validate client certificates when configured with a non-CA certificate as [+trusted certificate+|https://developer.hashicorp.com/vault/api-docs/auth/cert#certificate]. In this configuration, an attacker may be able to craft a malicious certificate that could be used to impersonate another user. Fixed in Vault Community Edition 1.20.1 and Vault Enterprise 1.20.1, 1.19.7, 1.18.12, and 1.16.23.

Alpine iLX-507 TIDAL Improper Certificate Validation Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Alpine iLX-507 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the TIDAL music streaming application. The issue results from improper certificate validation. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-26322.

IBM MQ Operator LTS 2.0.0 through 2.0.29, MQ Operator CD 3.0.0, 3.0.1, 3.1.0 through 3.1.3, 3.3.0, 3.4.0, 3.4.1, 3.5.0, 3.5.1, 3.6.0, and MQ Operator SC2 3.2.0 through 3.2.13 Internet Pass-Thru could allow a malicious user to obtain sensitive information from another TLS session connection by the proxy to the same hostname and port due to improper certificate validation.

A certificate verification error in wolfSSL when building with the WOLFSSL_SYS_CA_CERTS and WOLFSSL_APPLE_NATIVE_CERT_VALIDATION options results in the wolfSSL client failing to properly verify the server certificate's domain name, allowing any certificate issued by a trusted CA to be accepted regardless of the hostname.

The communication protocol used between client and server had a flaw that could be leveraged to execute a man in the middle attack.

Improper certificate validation in Zoom Workplace for Linux before version 6.4.13 may allow an unauthorized user to conduct an information disclosure via network access.

A heap-buffer-overread vulnerability was found in GnuTLS in how it handles the Certificate Transparency (CT) Signed Certificate Timestamp (SCT) extension during X.509 certificate parsing. This flaw allows a malicious user to create a certificate containing a malformed SCT extension (OID 1.3.6.1.4.1.11129.2.4.2) that contains sensitive data. This issue leads to the exposure of confidential information when GnuTLS verifies certificates from certain websites when the certificate (SCT) is not checked correctly.

Improper Certificate Validation (CWE-295) in the Controller 7000 OneLink implementation could allow an unprivileged attacker to perform a limited denial of service or perform privileged overrides during the initial configuration of the Controller, there is no risk for Controllers once they are connected. This issue affects Controller 7000: 9.30 prior to vCR9.30.250624a (distributed in 9.30.1871 (MR1)).

Improper certificate validation in Windows SMB allows an authorized attacker to perform spoofing over a network.

A vulnerability has been identified in SICAM TOOLBOX II (All versions < V07.11). During establishment of a https connection to the TLS server of a managed device, the affected application doesn't check device's certificate common name against an expected value. This could allow an attacker to execute an on-path network (MitM) attack.

A vulnerability has been identified in SICAM TOOLBOX II (All versions < V07.11). During establishment of a https connection to the TLS server of a managed device, the affected application doesn't check the extended key usage attribute of that device's certificate. This could allow an attacker to execute an on-path network (MitM) attack.

A vulnerability classified as critical has been found in Comodo Internet Security Premium 12.3.4.8162. This affects an unknown part of the component Update Handler. The manipulation leads to improper certificate validation. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The vendor was contacted early about this disclosure but did not respond in any way.

An improper certificate validation vulnerability exists in AVTECH IP cameras, DVRs, and NVRs due to the use of wget with --no-check-certificate in scripts like SyncCloudAccount.sh and SyncPermit.sh. This exposes HTTPS communications to man-in-the-middle (MITM) attacks.

An issue in MHSanaei 3x-ui before v.2.5.3 and before allows a remote attacker to execute arbitrary code via the management script x-ui passes the no check certificate option to wget when downloading updates

A flaw was found in Podman. The podman machine init command fails to verify the TLS certificate when downloading the VM images from an OCI registry. This issue results in a Man In The Middle attack.

If a user visited a webpage with an invalid TLS certificate, and granted an exception, the webpage was able to provide a WebAuthn challenge that the user would be prompted to complete. This is in violation of the WebAuthN spec which requires "a secure transport established without errors". This vulnerability affects Firefox < 140 and Thunderbird < 140.

A vulnerability exists in the IEC 61850 in MicroSCADA X SYS600 product. The certificate validation of the TLS protocol allows remote Man-in-the-Middle attack due to missing proper validation.

In Yealink RPS before 2025-05-26, the certificate upload function does not properly validate certificate content, potentially allowing invalid certificates to be uploaded.

An issue was discovered on COROS PACE 3 devices through 3.0808.0. It implements a function to connect the watch to a WLAN. This function is mainly for downloading firmware files. Before downloading firmware files, the watch requests some information about the firmware via HTTPS from the back-end API. However, the X.509 server certificate within the TLS handshake is not validated by the device. This allows an attacker within an active machine-in-the-middle position, using a TLS proxy and a self-signed certificate, to eavesdrop and manipulate the HTTPS communication. This could be abused, for example, for stealing the API access token of the assigned user account.

IBM MQ Operator LTS 2.0.0 through 2.0.29, MQ Operator CD 3.0.0, 3.0.1, 3.1.0 through 3.1.3, 3.3.0, 3.4.0, 3.4.1, 3.5.0, 3.5.1 through 3.5.3, and MQ Operator SC2 3.2.0 through 3.2.12 Native HA CRR could be configured with a private key and chain other than the intended key which could disclose sensitive information or allow the attacker to perform unauthorized actions.

An Improper Certificate Validation vulnerability [CWE-295] in FortiOS version 7.6.1 and below, version 7.4.7 and below may allow an EAP verified remote user to connect from FortiClient via revoked certificate.

An improper certificate validation vulnerability has been reported to affect File Station 5. If exploited, the vulnerability could allow remote attackers who have gained user access to compromise the security of the system. We have already fixed the vulnerability in the following versions: File Station 5 5.5.6.4791 and later and later

An improper certificate validation vulnerability has been reported to affect File Station 5. If exploited, the vulnerability could allow remote attackers who have gained user access to compromise the security of the system. We have already fixed the vulnerability in the following versions: File Station 5 5.5.6.4791 and later and later

An improper certificate validation vulnerability has been reported to affect File Station 5. If exploited, the vulnerability could allow remote attackers who have gained user access to compromise the security of the system. We have already fixed the vulnerability in the following versions: File Station 5 5.5.6.4791 and later and later

An improper certificate validation vulnerability has been reported to affect File Station 5. If exploited, the vulnerability could allow remote attackers who have gained user access to compromise the security of the system. We have already fixed the vulnerability in the following versions: File Station 5 5.5.6.4791 and later and later

An improper certificate validation vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to compromise the security of the system. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.4847 and later

An improper certificate validation vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to compromise the security of the system. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.4847 and later

libcurl supports *pinning* of the server certificate public key for HTTPS transfers. Due to an omission, this check is not performed when connecting with QUIC for HTTP/3, when the TLS backend is wolfSSL. Documentation says the option works with wolfSSL, failing to specify that it does not for QUIC and HTTP/3. Since pinning makes the transfer succeed if the pin is fine, users could unwittingly connect to an impostor server without noticing.

When the Amazon Redshift Python Connector is configured with the BrowserAzureOAuth2CredentialsProvider plugin, the driver skips the SSL certificate validation step for the Identity Provider. An insecure connection could allow an actor to intercept the token exchange process and retrieve an access token. This issue has been addressed in driver version 2.1.7. Users should upgrade to address this issue and ensure any forked or derivative code is patched to incorporate the new fixes.

SSL Verification Bypass vulnerabilities exist in ASPECT if administrator credentials become compromisedThis issue affects ASPECT-Enterprise: through 3.*; NEXUS Series: through 3.*; MATRIX Series: through 3.*.

Issue summary: Use of -addreject option with the openssl x509 application adds a trusted use instead of a rejected use for a certificate. Impact summary: If a user intends to make a trusted certificate rejected for a particular use it will be instead marked as trusted for that use. A copy & paste error during minor refactoring of the code introduced this issue in the OpenSSL 3.5 version. If, for example, a trusted CA certificate should be trusted only for the purpose of authenticating TLS servers but not for CMS signature verification and the CMS signature verification is intended to be marked as rejected with the -addreject option, the resulting CA certificate will be trusted for CMS signature verification purpose instead. Only users which use the trusted certificate format who use the openssl x509 command line application to add rejected uses are affected by this issue. The issues affecting only the command line application are considered to be Low severity. The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 3.4, 3.3, 3.2, 3.1, 3.0, 1.1.1 and 1.0.2 are also not affected by this issue.

IBM Security ReaQta EDR 3.12 could allow an attacker to perform unauthorized actions due to improper SSL certificate validation.

IBM Security ReaQta EDR 3.12 could allow an attacker to spoof a trusted entity by interfering with the communication path between the host and client.

Samsung Internet for Galaxy Watch version 5.0.9, available up until Samsung Galaxy Watch 3, does not properly validate TLS certificates, allowing for an attacker to impersonate any and all websites visited by the user. This is a critical misconfiguration in the way the browser validates the identity of the server. It negates the use of HTTPS as a secure channel, allowing for Man-in-the-Middle attacks, stealing sensitive information or modifying incoming and outgoing traffic. NOTE: This vulnerability is in an end-of-life product that is no longer maintained by the vendor.

"This issue is limited to motherboards and does not affect laptops, desktop computers, or other endpoints." An insufficient validation vulnerability in ASUS DriverHub may allow untrusted sources to affect system behavior via crafted HTTP requests. Refer to the 'Security Update for ASUS DriverHub' section on the ASUS Security Advisory for more information.

A vulnerability in certificate validation processing of Cisco Catalyst SD-WAN Manager, formerly Cisco SD-WAN vManage, could allow an unauthenticated, remote attacker to gain access to sensitive information. This vulnerability is due to improper validation of certificates that are used by the Smart Licensing feature. An attacker with a privileged network position could exploit this vulnerability by intercepting traffic that is sent over the Internet. A successful exploit could allow the attacker to gain access to sensitive information, including credentials used by the device to connect to Cisco cloud services.

JRuby-OpenSSL is an add-on gem for JRuby that emulates the Ruby OpenSSL native library. Starting in JRuby-OpenSSL version 0.12.1 and prior to version 0.15.4 (corresponding to JRuby versions starting in 9.3.4.0 prior to 9.4.12.1 and 10.0.0.0 prior to 10.0.0.1), when verifying SSL certificates, JRuby-OpenSSL does not verify that the hostname presented in the certificate matches the one the user tries to connect to. This means a man-in-the-middle could just present any valid cert for a completely different domain they own, and JRuby would accept the cert. Anybody using JRuby to make requests of external APIs, or scraping the web, that depends on https to connect securely. JRuby-OpenSSL version 0.15.4 contains a fix for the issue. This fix is included in JRuby versions 10.0.0.1 and 9.4.12.1.

syslog-ng is an enhanced log daemo. Prior to version 4.8.2, `tls_wildcard_match()` matches on certificates such as `foo.*.bar` although that is not allowed. It is also possible to pass partial wildcards such as `foo.a*c.bar` which glib matches but should be avoided / invalidated. This issue could have an impact on TLS connections, such as in man-in-the-middle situations. Version 4.8.2 contains a fix for the issue.

IBM i 7.2, 7.3, 7.4, 7.5, and 7.6 is vulnerable to authentication and authorization attacks due to incorrect validation processing in IBM i Netserver. A malicious actor could use the weaknesses, in conjunction with brute force authentication attacks or to bypass authority restrictions, to access the server.