A vulnerability was found in mtons mblog up to 3.5.0. This issue affects some unknown processing of the file /settings/password. The manipulation leads to improper restriction of excessive authentication attempts. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

A vulnerability was determined in mtons mblog up to 3.5.0. Affected by this issue is some unknown functionality of the file /email/send_code of the component Verification Code Handler. The manipulation of the argument email leads to improper restriction of excessive authentication attempts. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

Soosyze CMS 2.0 allows brute-force login attacks via the /user/login endpoint due to missing rate-limiting and lockout mechanisms. An attacker can repeatedly submit login attempts without restrictions, potentially gaining unauthorized administrative access. This vulnerability corresponds to CWE-307: Improper Restriction of Excessive Authentication Attempts.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. In versions 2.3.1 and below, OpenBao's Login Multi-Factor Authentication (MFA) system allows enforcing MFA using Time-based One Time Password (TOTP). Due to normalization applied by the underlying TOTP library, codes were accepted which could contain whitespace; this whitespace could bypass internal rate limiting of the MFA method and allow reuse of existing MFA codes. This issue was fixed in version 2.3.2. To work around this, use of rate-limiting quotas can limit an attacker's ability to exploit this: https://openbao.org/api-docs/system/rate-limit-quotas/.

OpenBao exists to provide a software solution to manage, store, and distribute sensitive data including secrets, certificates, and keys. In versions 0.1.0 through 2.3.1, attackers could bypass the automatic user lockout mechanisms in the OpenBao Userpass or LDAP auth systems. This was caused by different aliasing between pre-flight and full login request user entity alias attributions. This is fixed in version 2.3.2. To work around this issue, existing users may apply rate-limiting quotas on the authentication endpoints:, see https://openbao.org/api-docs/system/rate-limit-quotas/.

A vulnerability was found in macrozheng mall 1.0.3. It has been rated as problematic. Affected by this issue is some unknown functionality of the component Admin Login. The manipulation leads to improper restriction of excessive authentication attempts. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The vendor was contacted early about this disclosure but did not respond in any way.

The affected product does not limit the number of attempts for inputting the correct PIN for a registered product, which may allow an attacker to gain unauthorized access using brute-force methods if they possess a valid device serial number. The API provides clear feedback when the correct PIN is entered. This vulnerability was patched in a server-side update on April 6, 2025.

Trilium Notes is an open-source, cross-platform hierarchical note taking application with focus on building large personal knowledge bases. In versions below 0.97.0, a brute-force protection bypass in the initial sync seed retrieval endpoint allows unauthenticated attackers to guess the login password without triggering rate limiting. Trilium is a single-user app without a username requirement, and brute-force protection bypass makes exploitation much more feasible. Multiple features provided by Trilium (e.g. MFA, share notes, custom request handler) indicate that Trilium can be exposed to the internet. This is fixed in version 0.97.0.

Vault and Vault Enterprise’s (“Vault”) login MFA rate limits could be bypassed and TOTP tokens could be reused. Fixed in Vault Community Edition 1.20.1 and Vault Enterprise 1.20.1, 1.19.7, 1.18.12, and 1.16.23.

Vault and Vault Enterprise’s (“Vault”) user lockout feature could be bypassed for Userpass and LDAP authentication methods. Fixed in Vault Community Edition 1.20.1 and Vault Enterprise 1.20.1, 1.19.7, 1.18.12, and 1.16.23.

A vulnerability has been identified in the Linux kernel's ksmbd component (kernel SMB/CIFS server). A security control designed to prevent dictionary attacks, which introduces a 5-second delay during session setup, can be bypassed through the use of asynchronous requests. This bypass negates the intended anti-brute-force protection, potentially allowing attackers to conduct dictionary attacks more efficiently against user credentials or other authentication mechanisms.

OPEXUS FOIAXpress Public Access Link (PAL) version v11.1.0 allows attackers to bypass account-lockout and CAPTCHA protections. Unauthenticated remote attackers can more easily brute force passwords.

Grandstream Networks UCM6510 v1.0.20.52 and before is vulnerable to Improper Restriction of Excessive Authentication Attempts. An attacker can perform an arbitrary number of authentication attempts using different passwords and eventually gain access to the targeted account using a brute force attack.

IBM Informix Dynamic Server 12.10 and 14.10 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials.

Improper Restriction of Excessive Authentication Attempts vulnerability in Drupal Mail Login allows Brute Force.This issue affects Mail Login: from 3.0.0 before 3.2.0, from 4.0.0 before 4.2.0.

A vulnerability was found in Mercusys MW301R 1.0.2 Build 190726 Rel.59423n. It has been rated as problematic. This issue affects some unknown processing of the component Login. The manipulation leads to improper restriction of excessive authentication attempts. The attack can only be initiated within the local network. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In Eclipse GlassFish version 7.0.16 or earlier it is possible to perform Login Brute Force attacks as there is no limitation in the number of failed login attempts.

The SMB server's login mechanism does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

The MEAC300-FNADE4 does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

The maxView Storage Manager does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

File Browser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename and edit files. Prior to version 2.34.1, a missing password policy and brute-force protection makes the authentication process insecure. Attackers could mount a brute-force attack to retrieve the passwords of all accounts in a given instance. This issue has been patched in version 2.34.1.

Improper Restriction of Excessive Authentication Attempts vulnerability in Art-in Bilişim Teknolojileri ve Yazılım Hizm. Tic. Ltd. Şti. Wi-Fi Cloud Hotspot allows Authentication Abuse, Authentication Bypass.This issue affects Wi-Fi Cloud Hotspot: before 30.05.2025.

Aviatrix Controller versions prior to 7.1.4208, 7.2.5090, and 8.0.0 do not enforce rate limiting on password reset attempts, allowing adversaries to brute force guess the 6-digit password reset PIN

Yealink RPS before 2025-06-04 lacks SN verification attempt limits, enabling brute-force enumeration (last five digits).

Weblate is a web based localization tool. Prior to version 5.12, the verification of the second factor was not subject to rate limiting. The absence of rate limiting on the second factor endpoint allows an attacker with valid credentials to automate OTP guessing. This issue has been patched in version 5.12.

Use of fixed learning codes, one code to lock the car and the other code to unlock it, in the Key Fob Transmitter in Cyclone Matrix TRF Smart Keyless Entry System, which allows a replay attack. Research was completed on the 2024 KIA Soluto.  Attack confirmed on other KIA Models in Ecuador.

Use of fixed learning codes, one code to lock the car and the other code to unlock it, the Key Fob Transmitter in KIA-branded Aftermarket Generic Smart Keyless Entry System, primarily distributed in Ecuador, which allows a replay attack. Manufacture is unknown at the time of release.  CVE Record will be updated once this is clarified.

vantage6 is an open source framework built to enable, manage and deploy privacy enhancing technologies like Federated Learning and Multi-Party Computation. If attacker gets access to an authenticated session, they can try to brute-force the user password by using the change password functionality: they can call that route infinitely which will return the message that password is wrong until it is correct. This vulnerability is fixed in 4.11.

The FTP server’s login mechanism does not restrict authentication attempts, allowing an attacker to brute-force user passwords and potentially compromising the FTP server.

The product does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks.

A vulnerability was found in Tenda TDSEE App up to 1.7.12. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file /app/ConfirmSmsCode of the component Password Reset Confirmation Code Handler. The manipulation leads to improper restriction of excessive authentication attempts. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 1.7.15 is able to address this issue. It is recommended to upgrade the affected component.

The DIGITS: WordPress Mobile Number Signup and Login WordPress plugin before 8.4.6.1 does not rate limit OTP validation attempts, making it straightforward for attackers to bruteforce them.

Password guessing limits could be bypassed when using LDAP authentication.

RAGFlow through 0.18.1 allows account takeover because it is possible to conduct successful brute-force attacks against email verification codes to perform arbitrary account registration, login, and password reset. Codes are six digits and there is no rate limiting.

An unauthenticated user could discover account credentials via a brute-force attack without rate limiting

An issue in the userId parameter in the change password function of Flytxt NEON-dX v0.0.1-SNAPSHOT-6.9-qa-2-9-g5502a0c allows attackers to execute brute force attacks to discover user passwords.

A vulnerability in the Cisco IOx application hosting environment of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the Cisco IOx application hosting environment to stop responding, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to cause the Cisco IOx application hosting environment to stop responding. The IOx process will need to be manually restarted to recover services.

Agentflow from Flowring Technology has an Account Lockout Bypass vulnerability, allowing unauthenticated remote attackers to exploit this vulnerability to perform password brute force attack.

This vulnerability exists in Meon KYC solutions due to missing restrictions on the number of incorrect One-Time Password (OTP) attempts through certain API endpoints of login process. A remote attacker could exploit this vulnerability by performing a brute force attack on OTP, which could lead to gain unauthorized access to other user accounts.

A vulnerability classified as problematic was found in ScriptAndTools eCommerce-website-in-PHP 3.0. Affected by this vulnerability is an unknown functionality of the file /admin/login.php. The manipulation leads to improper restriction of excessive authentication attempts. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as problematic has been found in ScriptAndTools eCommerce-website-in-PHP 3.0. Affected is an unknown function of the file /login.php. The manipulation leads to improper restriction of excessive authentication attempts. It is possible to launch the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Improper Restriction of Excessive Authentication Attempts vulnerability in Drupal Access code allows Brute Force.This issue affects Access code: from 0.0.0 before 2.0.4.

Lack of protection against brute force attacks in Valmet DNA visualization in DNA Operate. The possibility to make an arbitrary number of login attempts without any rate limit gives an attacker an increased chance of guessing passwords and then performing switching operations.

Weak Authentication vulnerability in Drupal Email TFA allows Brute Force.This issue affects Email TFA: from 0.0.0 before 2.0.3.

Unauthorised access to the call forwarding service system in MeetMe products in versions prior to 2024-09 allows an attacker to identify multiple users and perform brute force attacks via extensions.

Improper Restriction of Excessive Authentication Attempts vulnerability in BG-TEK Coslat Hotspot allows Password Brute Forcing, Authentication Abuse.This issue affects Coslat Hotspot: before 6.26.0.R.20250227.

langgenius/dify version v0.10.1 contains a vulnerability where there are no limits applied to the number of code guess attempts for password reset. This allows an unauthenticated attacker to reset owner, admin, or other user passwords within a few hours by guessing the six-digit code, resulting in a complete compromise of the application.

HCL MyXalytics is affected by concurrent login vulnerability. A concurrent login vulnerability occurs when simultaneous active sessions are allowed for a single credential allowing an attacker to potentially obtain access to a user's account or sensitive information.

A lack of rate limiting in the login page of Safe App version a3.0.9 allows attackers to bypass authentication via a brute force attack.

IBM Concert Software 1.0.5 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials.