In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_xcvr: Revert fix missing lock in fsl_xcvr_mode_put() This reverts commit f51424872760 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()"). The original patch attempted to acquire the card->controls_rwsem lock in fsl_xcvr_mode_put(). However, this function is called from the upper ALSA core function snd_ctl_elem_write(), which already holds the write lock on controls_rwsem for the whole put operation. So there is no need to simply hold the lock for fsl_xcvr_activate_ctl() again. Acquiring the read lock while holding the write lock in the same thread results in a deadlock and a hung task, as reported by Alexander Stein.

In the Linux kernel, the following vulnerability has been resolved: NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages LOCALIO is an NFS loopback mount optimization that avoids using the network for READ, WRITE and COMMIT if the NFS client and server are determined to be on the same system. But because LOCALIO is still fundamentally "just NFS loopback mount" it is susceptible to recursion deadlock via direct reclaim, e.g.: NFS LOCALIO down to XFS and then back into NFS via nfs_writepages. Fix LOCALIO's potential for direct reclaim deadlock by ensuring that all its page cache allocations are done from GFP_NOFS context. Thanks to Ben Coddington for pointing out commit ad22c7a043c2 ("xfs: prevent stack overflows from page cache allocation").

In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix locking in regulator_resolve_supply() error path If late enabling of a supply regulator fails in regulator_resolve_supply(), the code currently triggers a lockdep warning: WARNING: drivers/regulator/core.c:2649 at _regulator_put+0x80/0xa0, CPU#6: kworker/u32:4/596 ... Call trace: _regulator_put+0x80/0xa0 (P) regulator_resolve_supply+0x7cc/0xbe0 regulator_register_resolve_supply+0x28/0xb8 as the regulator_list_mutex must be held when calling _regulator_put(). To solve this, simply switch to using regulator_put(). While at it, we should also make sure that no concurrent access happens to our rdev while we clear out the supply pointer. Add appropriate locking to ensure that. While the code in question will be removed altogether in a follow-up commit, I believe it is still beneficial to have this corrected before removal for future reference.

In the Linux kernel, the following vulnerability has been resolved: cgroup: Defer css percpu_ref kill on rmdir until cgroup is depopulated A chain of commits going back to v7.0 reworked rmdir to satisfy the controller invariant that a subsystem's ->css_offline() must not run while tasks are still doing kernel-side work in the cgroup. [1] d245698d727a ("cgroup: Defer task cgroup unlink until after the task is done switching out") [2] a72f73c4dd9b ("cgroup: Don't expose dead tasks in cgroup") [3] 1b164b876c36 ("cgroup: Wait for dying tasks to leave on rmdir") [4] 4c56a8ac6869 ("cgroup: Fix cgroup_drain_dying() testing the wrong condition") [5] 13e786b64bd3 ("cgroup: Increment nr_dying_subsys_* from rmdir context") [1] moved task cset unlink from do_exit() to finish_task_switch() so a task's cset link drops only after the task has fully stopped scheduling. That made tasks past exit_signals() linger on cset->tasks until their final context switch, which led to a series of problems as what userspace expected to see after rmdir diverged from what the kernel needs to wait for. [2]-[5] tried to bridge that divergence: [2] filtered the exiting tasks from cgroup.procs; [3] had rmdir(2) sleep in TASK_UNINTERRUPTIBLE for them; [4] fixed the wait's condition; [5] made nr_dying_subsys_* visible synchronously. The cgroup_drain_dying() wait in [3] turned out to be a dead end. When the rmdir caller is also the reaper of a zombie that pins a pidns teardown (e.g. host PID 1 systemd reaping orphan pids that were re-parented to it during the same teardown), rmdir blocks in TASK_UNINTERRUPTIBLE waiting for those pids to free, the pids can't free because PID 1 is the reaper and it's stuck in rmdir, and the system A-A deadlocks. No internal lock ordering breaks this; the wait itself is the bug. The css killing side that drove the original reorder, however, can be made cleanly asynchronous: ->css_offline() is already async, run from css_killed_work_fn() driven by percpu_ref_kill_and_confirm(). The fix is to make that chain start only after all tasks have left the cgroup. rmdir's user-visible side then returns as soon as cgroup.procs and friends are empty, while ->css_offline() still runs only after the cgroup is fully drained. Verified by the original reproducer (pidns teardown + zombie reaper, runs under vng) which hangs vanilla and succeeds here, and by per-commit deterministic repros for [2], [3], [4], [5] with a boot parameter that widens the post-exit_signals() window so each state is reliably reachable. Some stress tests on top of that. cgroup_apply_control_disable() has the same shape of pre-existing race: when a controller is disabled via subtree_control, kill_css() ran synchronously while tasks past exit_signals() could still be linked to the cgroup's csets, and ->css_offline() could fire before they drained. This patch preserves the existing synchronous behavior at that call site (kill_css_sync() + kill_css_finish() back-to-back) and a follow-up patch will defer kill_css_finish() there using a per-css trigger. This seems like the right approach and I don't see problems with it. The changes are somewhat invasive but not excessively so, so backporting to -stable should be okay. If something does turn out to be wrong, the fallback is to revert the entire chain ([1]-[5]) and rework in the development branch instead. v2: Pin cgrp across the deferred destroy work with explicit cgroup_get()/cgroup_put() around queue_work() and the work_fn. v1 wasn't actually broken (ordered cgroup_offline_wq + queue_work order in cgroup_task_dead() saved it) but the explicit ref removes the dependency on those non-obvious invariants. Also note the pre-existing cgroup_apply_control_disable() race in the description; a follow-up will defer kill_css_finish() there.

In the Linux kernel, the following vulnerability has been resolved: openvswitch: vport: fix self-deadlock on release of tunnel ports vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed and the reference is never released, causing a self-deadlock on device removal. Fix that by moving the rcu_call() before the rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself is already released.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang() The switch case in loongson_gpu_fixup_dma_hang() may not DC2 or DC3, and readl(crtc_reg) will access with random address, because the "device" is from "base+PCI_DEVICE_ID", "base" is from "pdev->devfn+1". This is wrong when my platform inserts a discrete GPU: lspci -tv -[0000:00]-+-00.0 Loongson Technology LLC Hyper Transport Bridge Controller ... +-06.0 Loongson Technology LLC LG100 GPU +-06.2 Loongson Technology LLC Device 7a37 ... Add a default switch case to fix the panic as below: Kernel ade access[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.136-loong64-desktop-hwe+ #4 pc 90000000017e5534 ra 90000000017e54c0 tp 90000001002f8000 sp 90000001002fb6c0 a0 80000efe00003100 a1 0000000000003100 a2 0000000000000000 a3 0000000000000002 a4 90000001002fb6b4 a5 900000087cdb58fd a6 90000000027af000 a7 0000000000000001 t0 00000000000085b9 t1 000000000000ffff t2 0000000000000000 t3 0000000000000000 t4 fffffffffffffffd t5 00000000fffb6d9c t6 0000000000083b00 t7 00000000000070c0 t8 900000087cdb4d94 u0 900000087cdb58fd s9 90000001002fb826 s0 90000000031c12c8 s1 7fffffffffffff00 s2 90000000031c12d0 s3 0000000000002710 s4 0000000000000000 s5 0000000000000000 s6 9000000100053000 s7 7fffffffffffff00 s8 90000000030d4000 ra: 90000000017e54c0 loongson_gpu_fixup_dma_hang+0x40/0x210 ERA: 90000000017e5534 loongson_gpu_fixup_dma_hang+0xb4/0x210 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000004 (PPLV0 +PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7) ESTAT: 00480000 [ADEM] (IS= ECode=8 EsubCode=1) BADV: 7fffffffffffff00 PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV) Modules linked in: Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____)) Stack : 0000000000000006 90000001002fb778 90000001002fb704 0000000000000007 0000000016a65700 90000000017e5690 000000000000ffff ffffffffffffffff 900000000209f7c0 9000000100053000 900000000209f7a8 9000000000eebc08 0000000000000000 0000000000000000 0000000000000006 90000001002fb778 90000001000530b8 90000000027af000 0000000000000000 9000000100054000 9000000100053000 9000000000ebb70c 9000000100004c00 9000000004000001 90000001002fb7e4 bae765461f31cb12 0000000000000000 0000000000000000 0000000000000006 90000000027af000 0000000000000030 90000000027af000 900000087cd6f800 9000000100053000 0000000000000000 9000000000ebc560 7a2500147cdaf720 bae765461f31cb12 0000000000000001 0000000000000030 ... Call Trace: [<90000000017e5534>] loongson_gpu_fixup_dma_hang+0xb4/0x210 [<9000000000eebc08>] pci_fixup_device+0x108/0x280 [<9000000000ebb70c>] pci_setup_device+0x24c/0x690 [<9000000000ebc560>] pci_scan_single_device+0xe0/0x140 [<9000000000ebc684>] pci_scan_slot+0xc4/0x280 [<9000000000ebdd00>] pci_scan_child_bus_extend+0x60/0x3f0 [<9000000000f5bc94>] acpi_pci_root_create+0x2b4/0x420 [<90000000017e5e74>] pci_acpi_scan_root+0x2d4/0x440 [<9000000000f5b02c>] acpi_pci_root_add+0x21c/0x3a0 [<9000000000f4ee54>] acpi_bus_attach+0x1a4/0x3c0 [<90000000010e200c>] device_for_each_child+0x6c/0xe0 [<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70 [<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0 [<90000000010e200c>] device_for_each_child+0x6c/0xe0 [<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70 [<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0 [<9000000000f5211c>] acpi_bus_scan+0x6c/0x280 [<900000000189c028>] acpi_scan_init+0x194/0x310 [<900000000189bc6c>] acpi_init+0xcc/0x140 [<9000000000220cdc>] do_one_initcall+0x4c/0x310 [<90000000018618fc>] kernel_init_freeable+0x258/0x2d4 [<900000000184326c>] kernel_init+0x28/0x13c [<9000000000222008>] ret_from_kernel_thread+0xc/0xa4

NVIDIA Display Driver for Windows and Linux contains a vulnerability where an attacker could leak held driver locks. A successful exploit of this vulnerability might lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix deadlock between devlink lock and esw->wq esw->work_queue executes esw_functions_changed_event_handler -> esw_vfs_changed_event_handler and acquires the devlink lock. .eswitch_mode_set (acquires devlink lock in devlink_nl_pre_doit) -> mlx5_devlink_eswitch_mode_set -> mlx5_eswitch_disable_locked -> mlx5_eswitch_event_handler_unregister -> flush_workqueue deadlocks when esw_vfs_changed_event_handler executes. Fix that by no longer flushing the work to avoid the deadlock, and using a generation counter to keep track of work relevance. This avoids an old handler manipulating an esw that has undergone one or more mode changes: - the counter is incremented in mlx5_eswitch_event_handler_unregister. - the counter is read and passed to the ephemeral mlx5_host_work struct. - the work handler takes the devlink lock and bails out if the current generation is different than the one it was scheduled to operate on. - mlx5_eswitch_cleanup does the final draining before destroying the wq. No longer flushing the workqueue has the side effect of maybe no longer cancelling pending vport_change_handler work items, but that's ok since those are disabled elsewhere: - mlx5_eswitch_disable_locked disables the vport eq notifier. - mlx5_esw_vport_disable disarms the HW EQ notification and marks vport->enabled under state_lock to false to prevent pending vport handler from doing anything. - mlx5_eswitch_cleanup destroys the workqueue and makes sure all events are disabled/finished.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix runtime suspend deadlock when there is pending job The runtime suspend callback drains the running job workqueue before suspending the device. If a job is still executing and calls pm_runtime_resume_and_get(), it can deadlock with the runtime suspend path. Fix this by moving pm_runtime_resume_and_get() from the job execution routine to the job submission routine, ensuring the device is resumed before the job is queued and avoiding the deadlock during runtime suspend.

In the Linux kernel, the following vulnerability has been resolved: mm: Fix a hmm_range_fault() livelock / starvation problem If hmm_range_fault() fails a folio_trylock() in do_swap_page, trying to acquire the lock of a device-private folio for migration, to ram, the function will spin until it succeeds grabbing the lock. However, if the process holding the lock is depending on a work item to be completed, which is scheduled on the same CPU as the spinning hmm_range_fault(), that work item might be starved and we end up in a livelock / starvation situation which is never resolved. This can happen, for example if the process holding the device-private folio lock is stuck in migrate_device_unmap()->lru_add_drain_all() sinc lru_add_drain_all() requires a short work-item to be run on all online cpus to complete. A prerequisite for this to happen is: a) Both zone device and system memory folios are considered in migrate_device_unmap(), so that there is a reason to call lru_add_drain_all() for a system memory folio while a folio lock is held on a zone device folio. b) The zone device folio has an initial mapcount > 1 which causes at least one migration PTE entry insertion to be deferred to try_to_migrate(), which can happen after the call to lru_add_drain_all(). c) No or voluntary only preemption. This all seems pretty unlikely to happen, but indeed is hit by the "xe_exec_system_allocator" igt test. Resolve this by waiting for the folio to be unlocked if the folio_trylock() fails in do_swap_page(). Rename migration_entry_wait_on_locked() to softleaf_entry_wait_unlock() and update its documentation to indicate the new use-case. Future code improvements might consider moving the lru_add_drain_all() call in migrate_device_unmap() to be called *after* all pages have migration entries inserted. That would eliminate also b) above. v2: - Instead of a cond_resched() in hmm_range_fault(), eliminate the problem by waiting for the folio to be unlocked in do_swap_page() (Alistair Popple, Andrew Morton) v3: - Add a stub migration_entry_wait_on_locked() for the !CONFIG_MIGRATION case. (Kernel Test Robot) v4: - Rename migrate_entry_wait_on_locked() to softleaf_entry_wait_on_locked() and update docs (Alistair Popple) v5: - Add a WARN_ON_ONCE() for the !CONFIG_MIGRATION version of softleaf_entry_wait_on_locked(). - Modify wording around function names in the commit message (Andrew Morton) (cherry picked from commit a69d1ab971a624c6f112cea61536569d579c3215)

In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid double-rtnl_lock ELP metric worker batadv_v_elp_get_throughput() might be called when the RTNL lock is already held. This could be problematic when the work queue item is cancelled via cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case, an rtnl_lock() would cause a deadlock. To avoid this, rtnl_trylock() was used in this function to skip the retrieval of the ethtool information in case the RTNL lock was already held. But for cfg80211 interfaces, batadv_get_real_netdev() was called - which also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must also be used instead and the lockless version __batadv_get_real_netdev() has to be called.

In the Linux kernel, the following vulnerability has been resolved: USB: dummy-hcd: Fix locking/synchronization error Syzbot testing was able to provoke an addressing exception and crash in the usb_gadget_udc_reset() routine in drivers/usb/gadgets/udc/core.c, resulting from the fact that the routine was called with a second ("driver") argument of NULL. The bad caller was set_link_state() in dummy_hcd.c, and the problem arose because of a race between a USB reset and driver unbind. These sorts of races were not supposed to be possible; commit 7dbd8f4cabd9 ("USB: dummy-hcd: Fix erroneous synchronization change"), along with a few followup commits, was written specifically to prevent them. As it turns out, there are (at least) two errors remaining in the code. Another patch will address the second error; this one is concerned with the first. The error responsible for the syzbot crash occurred because the stop_activity() routine will sometimes drop and then re-acquire the dum->lock spinlock. A call to stop_activity() occurs in set_link_state() when handling an emulated USB reset, after the test of dum->ints_enabled and before the increment of dum->callback_usage. This allowed another thread (doing a driver unbind) to sneak in and grab the spinlock, and then clear dum->ints_enabled and dum->driver. Normally this other thread would have to wait for dum->callback_usage to go down to 0 before it would clear dum->driver, but in this case it didn't have to wait since dum->callback_usage had not yet been incremented. The fix is to increment dum->callback_usage _before_ calling stop_activity() instead of after. Then the thread doing the unbind will not clear dum->driver until after the call to usb_gadget_udc_reset() safely returns and dum->callback_usage has been decremented again.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix SCX_KICK_WAIT deadlock by deferring wait to balance callback SCX_KICK_WAIT busy-waits in kick_cpus_irq_workfn() using smp_cond_load_acquire() until the target CPU's kick_sync advances. Because the irq_work runs in hardirq context, the waiting CPU cannot reschedule and its own kick_sync never advances. If multiple CPUs form a wait cycle, all CPUs deadlock. Replace the busy-wait in kick_cpus_irq_workfn() with resched_curr() to force the CPU through do_pick_task_scx(), which queues a balance callback to perform the wait. The balance callback drops the rq lock and enables IRQs following the sched_core_balance() pattern, so the CPU can process IPIs while waiting. The local CPU's kick_sync is advanced on entry to do_pick_task_scx() and continuously during the wait, ensuring any CPU that starts waiting for us sees the advancement and cannot form cyclic dependencies.

In the Linux kernel, the following vulnerability has been resolved: spi: spidev: fix lock inversion between spi_lock and buf_lock The spidev driver previously used two mutexes, spi_lock and buf_lock, but acquired them in different orders depending on the code path: write()/read(): buf_lock -> spi_lock ioctl(): spi_lock -> buf_lock This AB-BA locking pattern triggers lockdep warnings and can cause real deadlocks: WARNING: possible circular locking dependency detected spidev_ioctl() -> mutex_lock(&spidev->buf_lock) spidev_sync_write() -> mutex_lock(&spidev->spi_lock) *** DEADLOCK *** The issue is reproducible with a simple userspace program that performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from separate threads on the same spidev file descriptor. Fix this by simplifying the locking model and removing the lock inversion entirely. spidev_sync() no longer performs any locking, and all callers serialize access using spi_lock. buf_lock is removed since its functionality is fully covered by spi_lock, eliminating the possibility of lock ordering issues. This removes the lock inversion and prevents deadlocks without changing userspace ABI or behaviour.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix mismatched unlock for DMUB HW lock in HWSS fast path [Why] The evaluation for whether we need to use the DMUB HW lock isn't the same as whether we need to unlock which results in a hang when the fast path is used for ASIC without FAMS support. [How] Store a flag that indicates whether we should use the lock and use that same flag to specify whether unlocking is needed.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Workaround SQM/PSE stalls by disabling sticky NIX SQ manager sticky mode is known to cause stalls when multiple SQs share an SMQ and transmit concurrently. Additionally, PSE may deadlock on transitions between sticky and non-sticky transmissions. There is also a credit drop issue observed when certain condition clocks are gated. work around these hardware errata by: - Disabling SQM sticky operation: - Clear TM6 (bit 15) - Clear TM11 (bit 14) - Disabling sticky → non-sticky transition path that can deadlock PSE: - Clear TM5 (bit 23) - Preventing credit drops by keeping the control-flow clock enabled: - Set TM9 (bit 21) These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this configuration the SQM/PSE maintain forward progress under load without credit loss, at the cost of disabling sticky optimizations.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: move wait_on_sem() out of spinlock With iommu.strict=1, the existing completion wait path can cause soft lockups under stressed environment, as wait_on_sem() busy-waits under the spinlock with interrupts disabled. Move the completion wait in iommu_completion_wait() out of the spinlock. wait_on_sem() only polls the hardware-updated cmd_sem and does not require iommu->lock, so holding the lock during the busy wait unnecessarily increases contention and extends the time with interrupts disabled.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: in-kernel: always set ID as avail when rm endp Syzkaller managed to find a combination of actions that was generating this warning: WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535 WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535 Modules linked in: CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline] RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline] RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline] RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538 Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89 RSP: 0018:ffffc9001535b820 EFLAGS: 00010287 netdevsim0: tun_chr_ioctl cmd 1074025677 RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000 RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7 netdevsim0: linktype set to 823 RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800 FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000 netlink: 'syz.3.50': attribute type 5 has an invalid length. CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'. CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0 Call Trace: <TASK> mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline] mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282 genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115 genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline] genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210 netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550 genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:718 [inline] __sock_sendmsg+0xc9/0xf0 net/socket.c:733 ____sys_sendmsg+0x272/0x3b0 net/socket.c:2608 ___sys_sendmsg+0x2de/0x320 net/socket.c:2662 __sys_sendmsg net/socket.c:2694 [inline] __do_sys_sendmsg net/socket.c:2699 [inline] __se_sys_sendmsg net/socket.c:2697 [inline] __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fc6adb66f6d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix locking usage for tcon fields We used to use the cifs_tcp_ses_lock to protect a lot of objects that are not just the server, ses or tcon lists. We later introduced srv_lock, ses_lock and tc_lock to protect fields within the corresponding structs. This was done to provide a more granular protection and avoid unnecessary serialization. There were still a couple of uses of cifs_tcp_ses_lock to provide tcon fields. In this patch, I've replaced them with tc_lock.

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix pci_slot_trylock() error handling Commit a4e772898f8b ("PCI: Add missing bridge lock to pci_bus_lock()") delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in pci_slot_trylock(), but it forgets to remove the corresponding pci_dev_unlock() when pci_bus_trylock() fails. Before a4e772898f8b, the code did: if (!pci_dev_trylock(dev)) /* <- lock bridge device */ goto unlock; if (dev->subordinate) { if (!pci_bus_trylock(dev->subordinate)) { pci_dev_unlock(dev); /* <- unlock bridge device */ goto unlock; } } After a4e772898f8b the bridge-device lock is no longer taken, but the pci_dev_unlock(dev) on the failure path was left in place, leading to the bug. This yields one of two errors: 1. A warning that the lock is being unlocked when no one holds it. 2. An incorrect unlock of a lock that belongs to another thread. Fix it by removing the now-redundant pci_dev_unlock(dev) on the failure path. [Same patch later posted by Keith at https://patch.msgid.link/20260116184150.3013258-1-kbusch@meta.com]

In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV" This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"), which causes a deadlock by recursively taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of pci_stop_and_remove_bus_device(). For example with the following sequence of commands: $ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs $ echo 1 > /sys/bus/pci/devices/<pf>/remove A trimmed trace of the deadlock on a mlx5 device is as below: zsh/5715 is trying to acquire lock: 000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140 but task is already holding lock: 000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80 ... Call Trace: [<00000259778c4f90>] dump_stack_lvl+0xc0/0x110 [<00000259779c844e>] print_deadlock_bug+0x31e/0x330 [<00000259779c1908>] __lock_acquire+0x16c8/0x32f0 [<00000259779bffac>] lock_acquire+0x14c/0x350 [<00000259789643a6>] __mutex_lock_common+0xe6/0x1520 [<000002597896413c>] mutex_lock_nested+0x3c/0x50 [<00000259784a07e4>] sriov_disable+0x34/0x140 [<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core] [<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core] [<00000259784857fc>] pci_device_remove+0x3c/0xa0 [<000002597851012e>] device_release_driver_internal+0x18e/0x280 [<000002597847ae22>] pci_stop_bus_device+0x82/0xa0 [<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80 [<00000259784972c2>] remove_store+0x72/0x90 [<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200 [<0000025977d7241c>] vfs_write+0x24c/0x300 [<0000025977d72696>] ksys_write+0x86/0x110 [<000002597895b61c>] __do_syscall+0x14c/0x400 [<000002597896e0ee>] system_call+0x6e/0x90 This alone is not a complete fix as it restores the issue the cited commit tried to solve. A new fix will be provided as a follow on.

In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix circular locking dependency in run_unpack_ex Syzbot reported a circular locking dependency between wnd->rw_lock (sbi->used.bitmap) and ni->file.run_lock. The deadlock scenario: 1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock. 2. run_unpack_ex() takes wnd->rw_lock then tries to acquire ni->file.run_lock inside ntfs_refresh_zone(). This creates an AB-BA deadlock. Fix this by using down_read_trylock() instead of down_read() when acquiring run_lock in run_unpack_ex(). If the lock is contended, skip ntfs_refresh_zone() - the MFT zone will be refreshed on the next MFT operation. This breaks the circular dependency since we never block waiting for run_lock while holding wnd->rw_lock.

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix TX deadlock when using DMA `dmaengine_terminate_async` does not guarantee that the `__dma_tx_complete` callback will run. The callback is currently the only place where `dma->tx_running` gets cleared. If the transaction is canceled and the callback never runs, then `dma->tx_running` will never get cleared and we will never schedule new TX DMA transactions again. This change makes it so we clear `dma->tx_running` after we terminate the DMA transaction. This is "safe" because `serial8250_tx_dma_flush` is holding the UART port lock. The first thing the callback does is also grab the UART port lock, so access to `dma->tx_running` is serialized.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix soft lockup in mptcp_recvmsg() syzbot reported a soft lockup in mptcp_recvmsg() [0]. When receiving data with MSG_PEEK | MSG_WAITALL flags, the skb is not removed from the sk_receive_queue. This causes sk_wait_data() to always find available data and never perform actual waiting, leading to a soft lockup. Fix this by adding a 'last' parameter to track the last peeked skb. This allows sk_wait_data() to make informed waiting decisions and prevent infinite loops when MSG_PEEK is used. [0]: watchdog: BUG: soft lockup - CPU#2 stuck for 156s! [server:1963] Modules linked in: CPU: 2 UID: 0 PID: 1963 Comm: server Not tainted 6.19.0-rc8 #61 PREEMPT(none) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:sk_wait_data+0x15/0x190 Code: 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 41 56 41 55 41 54 49 89 f4 55 48 89 d5 53 48 89 fb <48> 83 ec 30 65 48 8b 05 17 a4 6b 01 48 89 44 24 28 31 c0 65 48 8b RSP: 0018:ffffc90000603ca0 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888102bf0800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffc90000603d18 RDI: ffff888102bf0800 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000101 R10: 0000000000000000 R11: 0000000000000075 R12: ffffc90000603d18 R13: ffff888102bf0800 R14: ffff888102bf0800 R15: 0000000000000000 FS: 00007f6e38b8c4c0(0000) GS:ffff8881b877e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa7bff1680 CR3: 0000000105cbe000 CR4: 00000000000006f0 Call Trace: <TASK> mptcp_recvmsg+0x547/0x8c0 net/mptcp/protocol.c:2329 inet_recvmsg+0x11f/0x130 net/ipv4/af_inet.c:891 sock_recvmsg+0x94/0xc0 net/socket.c:1100 __sys_recvfrom+0xb2/0x130 net/socket.c:2256 __x64_sys_recvfrom+0x1f/0x30 net/socket.c:2267 do_syscall_64+0x59/0x2d0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:131 RIP: 0033:0x7f6e386a4a1d Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8d 05 f1 de 2c 00 41 89 ca 8b 00 85 c0 75 20 45 31 c9 45 31 c0 b8 2d 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 6b f3 c3 66 0f 1f 84 00 00 00 00 00 41 56 41 RSP: 002b:00007ffc3c4bb078 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 000000000000861e RCX: 00007f6e386a4a1d RDX: 00000000000003ff RSI: 00007ffc3c4bb150 RDI: 0000000000000004 RBP: 00007ffc3c4bb570 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000103 R11: 0000000000000246 R12: 00005605dbc00be0 R13: 00007ffc3c4bb650 R14: 0000000000000000 R15: 0000000000000000 </TASK>

In the Linux kernel, the following vulnerability has been resolved: usb: dwc2: gadget: Fix spin_lock/unlock mismatch in dwc2_hsotg_udc_stop() dwc2_gadget_exit_clock_gating() internally calls call_gadget() macro, which expects hsotg->lock to be held since it does spin_unlock/spin_lock around the gadget driver callback invocation. However, dwc2_hsotg_udc_stop() calls dwc2_gadget_exit_clock_gating() without holding the lock. This leads to: - spin_unlock on a lock that is not held (undefined behavior) - The lock remaining held after dwc2_gadget_exit_clock_gating() returns, causing a deadlock when spin_lock_irqsave() is called later in the same function. Fix this by acquiring hsotg->lock before calling dwc2_gadget_exit_clock_gating() and releasing it afterwards, which satisfies the locking requirement of the call_gadget() macro.

In the Linux kernel, the following vulnerability has been resolved: gpio: omap: do not register driver in probe() Commit 11a78b794496 ("ARM: OMAP: MPUIO wake updates") registers the omap_mpuio_driver from omap_mpuio_init(), which is called from omap_gpio_probe(). However, it neither makes sense to register drivers from probe() callbacks of other drivers, nor does the driver core allow registering drivers with a device lock already being held. The latter was revealed by commit dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()") leading to a potential deadlock condition described in [1]. Additionally, the omap_mpuio_driver is never unregistered from the driver core, even if the module is unloaded. Hence, register the omap_mpuio_driver from the module initcall and unregister it in module_exit().

In the Linux kernel, the following vulnerability has been resolved: Input: uinput - fix circular locking dependency with ff-core A lockdep circular locking dependency warning can be triggered reproducibly when using a force-feedback gamepad with uinput (for example, playing ELDEN RING under Wine with a Flydigi Vader 5 controller): ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex The cycle is caused by four lock acquisition paths: 1. ff upload: input_ff_upload() holds ff->mutex and calls uinput_dev_upload_effect() -> uinput_request_submit() -> uinput_request_send(), which acquires udev->mutex. 2. device create: uinput_ioctl_handler() holds udev->mutex and calls uinput_create_device() -> input_register_device(), which acquires input_mutex. 3. device register: input_register_device() holds input_mutex and calls kbd_connect() -> input_register_handle(), which acquires dev->mutex. 4. evdev release: evdev_release() calls input_flush_device() under dev->mutex, which calls input_ff_flush() acquiring ff->mutex. Fix this by introducing a new state_lock spinlock to protect udev->state and udev->dev access in uinput_request_send() instead of acquiring udev->mutex. The function only needs to atomically check device state and queue an input event into the ring buffer via uinput_dev_event() -- both operations are safe under a spinlock (ktime_get_ts64() and wake_up_interruptible() do not sleep). This breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in the lock ordering and cannot form cycles with mutexes. To keep state transitions visible to uinput_request_send(), protect writes to udev->state in uinput_create_device() and uinput_destroy_device() with the same state_lock spinlock. Additionally, move init_completion(&request->done) from uinput_request_send() to uinput_request_submit() before uinput_request_reserve_slot(). Once the slot is allocated, uinput_flush_requests() may call complete() on it at any time from the destroy path, so the completion must be initialised before the request becomes visible. Lock ordering after the fix: ff->mutex -> state_lock (spinlock, leaf) udev->mutex -> state_lock (spinlock, leaf) udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)

In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: add missing return after LLCP_CLOSED checks In nfc_llcp_recv_hdlc() and nfc_llcp_recv_disc(), when the socket state is LLCP_CLOSED, the code correctly calls release_sock() and nfc_llcp_sock_put() but fails to return. Execution falls through to the remainder of the function, which calls release_sock() and nfc_llcp_sock_put() again. This results in a double release_sock() and a refcount underflow via double nfc_llcp_sock_put(), leading to a use-after-free. Add the missing return statements after the LLCP_CLOSED branches in both functions to prevent the fall-through.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix possible deadlock between unlink and dio_end_io_write ocfs2_unlink takes orphan dir inode_lock first and then ip_alloc_sem, while in ocfs2_dio_end_io_write, it acquires these locks in reverse order. This creates an ABBA lock ordering violation on lock classes ocfs2_sysfile_lock_key[ORPHAN_DIR_SYSTEM_INODE] and ocfs2_file_ip_alloc_sem_key. Lock Chain #0 (orphan dir inode_lock -> ip_alloc_sem): ocfs2_unlink ocfs2_prepare_orphan_dir ocfs2_lookup_lock_orphan_dir inode_lock(orphan_dir_inode) <- lock A __ocfs2_prepare_orphan_dir ocfs2_prepare_dir_for_insert ocfs2_extend_dir ocfs2_expand_inline_dir down_write(&oi->ip_alloc_sem) <- Lock B Lock Chain #1 (ip_alloc_sem -> orphan dir inode_lock): ocfs2_dio_end_io_write down_write(&oi->ip_alloc_sem) <- Lock B ocfs2_del_inode_from_orphan() inode_lock(orphan_dir_inode) <- Lock A Deadlock Scenario: CPU0 (unlink) CPU1 (dio_end_io_write) ------ ------ inode_lock(orphan_dir_inode) down_write(ip_alloc_sem) down_write(ip_alloc_sem) inode_lock(orphan_dir_inode) Since ip_alloc_sem is to protect allocation changes, which is unrelated with operations in ocfs2_del_inode_from_orphan. So move ocfs2_del_inode_from_orphan out of ip_alloc_sem to fix the deadlock.

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix deadlock during netdev reset with active connections Resolve deadlock that occurs when user executes netdev reset while RDMA applications (e.g., rping) are active. The netdev reset causes ice driver to remove irdma auxiliary driver, triggering device_delete and subsequent client removal. During client removal, uverbs_client waits for QP reference count to reach zero while cma_client holds the final reference, creating circular dependency and indefinite wait in iWARP mode. Skip QP reference count wait during device reset to prevent deadlock.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix exception exit lock checking for subprogs process_bpf_exit_full() passes check_lock = !curframe to check_resource_leak(), which is false in cases when bpf_throw() is called from a static subprog. This makes check_resource_leak() to skip validation of active_rcu_locks, active_preempt_locks, and active_irq_id on exception exits from subprogs. At runtime bpf_throw() unwinds the stack via ORC without releasing any user-acquired locks, which may cause various issues as the result. Fix by setting check_lock = true for exception exits regardless of curframe, since exceptions bypass all intermediate frame cleanup. Update the error message prefix to "bpf_throw" for exception exits to distinguish them from normal BPF_EXIT. Fix reject_subprog_with_rcu_read_lock test which was previously passing for the wrong reason. Test program returned directly from the subprog call without closing the RCU section, so the error was triggered by the unclosed RCU lock on normal exit, not by bpf_throw. Update __msg annotations for affected tests to match the new "bpf_throw" error prefix. The spin_lock case is not affected because they are already checked [1] at the call site in do_check_insn() before bpf_throw can run. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix circular locking dependency in nci_close_device nci_close_device() flushes rx_wq and tx_wq while holding req_lock. This causes a circular locking dependency because nci_rx_work() running on rx_wq can end up taking req_lock too: nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete -> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target -> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock) Move the flush of rx_wq after req_lock has been released. This should safe (I think) because NCI_UP has already been cleared and the transport is closed, so the work will see it and return -ENETDOWN. NIPA has been hitting this running the nci selftest with a debug kernel on roughly 4% of the runs.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del() l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer and id_addr_timer while holding conn->lock. However, the work functions l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire conn->lock, creating a potential AB-BA deadlock if the work is already executing when l2cap_conn_del() takes the lock. Move the work cancellations before acquiring conn->lock and use disable_delayed_work_sync() to additionally prevent the works from being rearmed after cancellation, consistent with the pattern used in hci_conn_del().

In the Linux kernel, the following vulnerability has been resolved: spi: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] Also note that we do not enable the driver_override feature of struct bus_type, as SPI - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead of "(null)\n".

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) Protect regulator operations with mutex The regulator operations pmbus_regulator_get_voltage(), pmbus_regulator_set_voltage(), and pmbus_regulator_list_voltage() access PMBus registers and shared data but were not protected by the update_lock mutex. This could lead to race conditions. However, adding mutex protection directly to these functions causes a deadlock because pmbus_regulator_notify() (which calls regulator_notifier_call_chain()) is often called with the mutex already held (e.g., from pmbus_fault_handler()). If a regulator callback then calls one of the now-protected voltage functions, it will attempt to acquire the same mutex. Rework pmbus_regulator_notify() to utilize a worker function to send notifications outside of the mutex protection. Events are stored as atomics in a per-page bitmask and processed by the worker. Initialize the worker and its associated data during regulator registration, and ensure it is cancelled on device removal using devm_add_action_or_reset(). While at it, remove the unnecessary include of linux/of.h.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix potential deadlock in cpu hotplug with osnoise The following sequence may leads deadlock in cpu hotplug: task1 task2 task3 ----- ----- ----- mutex_lock(&interface_lock) [CPU GOING OFFLINE] cpus_write_lock(); osnoise_cpu_die(); kthread_stop(task3); wait_for_completion(); osnoise_sleep(); mutex_lock(&interface_lock); cpus_read_lock(); [DEAD LOCK] Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock).

In the Linux kernel, the following vulnerability has been resolved: bridge: mrp: reject zero test interval to avoid OOM panic br_mrp_start_test() and br_mrp_start_in_test() accept the user-supplied interval value from netlink without validation. When interval is 0, usecs_to_jiffies(0) yields 0, causing the delayed work (br_mrp_test_work_expired / br_mrp_in_test_work_expired) to reschedule itself with zero delay. This creates a tight loop on system_percpu_wq that allocates and transmits MRP test frames at maximum rate, exhausting all system memory and causing a kernel panic via OOM deadlock. The same zero-interval issue applies to br_mrp_start_in_test_parse() for interconnect test frames. Use NLA_POLICY_MIN(NLA_U32, 1) in the nla_policy tables for both IFLA_BRIDGE_MRP_START_TEST_INTERVAL and IFLA_BRIDGE_MRP_START_IN_TEST_INTERVAL, so zero is rejected at the netlink attribute parsing layer before the value ever reaches the workqueue scheduling code. This is consistent with how other bridge subsystems (br_fdb, br_mst) enforce range constraints on netlink attributes.

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix deadlock in soft reset sequence The soft reset sequence is currently executed from the threaded IRQ handler, hence it cannot call disable_irq() which internally waits for IRQ handlers, i.e. itself, to complete. Use disable_irq_nosync() during a soft reset instead.

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Fix a locking bug Make sure that wl->mutex is locked before it is unlocked. This has been detected by the Clang thread-safety analyzer.

In the Linux kernel, the following vulnerability has been resolved: net/rds: Fix circular locking dependency in rds_tcp_tune syzbot reported a circular locking dependency in rds_tcp_tune() where sk_net_refcnt_upgrade() is called while holding the socket lock: ====================================================== WARNING: possible circular locking dependency detected ====================================================== kworker/u10:8/15040 is trying to acquire lock: ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0}, at: __kmalloc_cache_noprof+0x4b/0x6f0 but task is already holding lock: ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: rds_tcp_tune+0xd7/0x930 The issue occurs because sk_net_refcnt_upgrade() performs memory allocation (via get_net_track() -> ref_tracker_alloc()) while the socket lock is held, creating a circular dependency with fs_reclaim. Fix this by moving sk_net_refcnt_upgrade() outside the socket lock critical section. This is safe because the fields modified by the sk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are not accessed by any concurrent code path at this point. v2: - Corrected fixes tag - check patch line wrap nits - ai commentary nits

In the Linux kernel, the following vulnerability has been resolved: rust_binder: call set_notification_done() without proc lock Consider the following sequence of events on a death listener: 1. The remote process dies and sends a BR_DEAD_BINDER message. 2. The local process invokes the BC_CLEAR_DEATH_NOTIFICATION command. 3. The local process then invokes the BC_DEAD_BINDER_DONE. Then, the kernel will reply to the BC_DEAD_BINDER_DONE command with a BR_CLEAR_DEATH_NOTIFICATION_DONE reply using push_work_if_looper(). However, this can result in a deadlock if the current thread is not a looper. This is because dead_binder_done() still holds the proc lock during set_notification_done(), which called push_work_if_looper(). Normally, push_work_if_looper() takes the thread lock, which is fine to take under the proc lock. But if the current thread is not a looper, then it falls back to delivering the reply to the process work queue, which involves taking the proc lock. Since the proc lock is already held, this is a deadlock. Fix this by releasing the proc lock during set_notification_done(). It was not intentional that it was held during that function to begin with. I don't think this ever happens in Android because BC_DEAD_BINDER_DONE is only invoked in response to BR_DEAD_BINDER messages, and the kernel always delivers BR_DEAD_BINDER to a looper. So there's no scenario where Android userspace will call BC_DEAD_BINDER_DONE on a non-looper thread.

In the Linux kernel, the following vulnerability has been resolved: net: phy: register phy led_triggers during probe to avoid AB-BA deadlock There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and LED_TRIGGER_PHY are enabled: [ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock); [ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234 [ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c [ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c [ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0 [ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0 [ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c [ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78 [ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock(); [ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0 [ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c [ 1362.104022] [<80014504>] syscall_common+0x34/0x58 Here LED_TRIGGER_PHY is registering LED triggers during phy_attach while holding RTNL and then taking triggers_list_lock. [ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock(); [ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4 [ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock); [ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c [ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc [ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c [ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4 [ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c [ 1362.232164] [<80014504>] syscall_common+0x34/0x58 Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes triggers_list_lock and then RTNL. A classical AB-BA deadlock. phy_led_triggers_registers() does not require the RTNL, it does not make any calls into the network stack which require protection. There is also no requirement the PHY has been attached to a MAC, the triggers only make use of phydev state. This allows the call to phy_led_triggers_registers() to be placed elsewhere. PHY probe() and release() don't hold RTNL, so solving the AB-BA deadlock.

In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix locking for bcm_op runtime updates Commit c2aba69d0c36 ("can: bcm: add locking for bcm_op runtime updates") added a locking for some variables that can be modified at runtime when updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup(). Usually the RX_SETUP only handles and filters incoming traffic with one exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is sent when a specific RTR frame is received. Therefore the rx bcm_op uses bcm_can_tx() which uses the bcm_tx_lock that was only initialized in bcm_tx_setup(). Add the missing spin_lock_init() when allocating the bcm_op in bcm_rx_setup() to handle the RTR case properly.

In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix deadlock in error path of mcp251x_open The mcp251x_open() function call free_irq() in its error path with the mpc_lock mutex held. But if an interrupt already occurred the interrupt handler will be waiting for the mpc_lock and free_irq() will deadlock waiting for the handler to finish. This issue is similar to the one fixed in commit 7dd9c26bd6cf ("can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open") but for the error path. To solve this issue move the call to free_irq() after the lock is released. Setting `priv->force_quit = 1` beforehand ensure that the IRQ handler will exit right away once it acquired the lock.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix invalid wait context in ctx_sched_in() Lockdep found a bug in the event scheduling when a pinned event was failed and wakes up the threads in the ring buffer like below. It seems it should not grab a wait-queue lock under perf-context lock. Let's do it with irq_work. [ 39.913691] ============================= [ 39.914157] [ BUG: Invalid wait context ] [ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted [ 39.915271] ----------------------------- [ 39.915731] repro/837 is trying to lock: [ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60 [ 39.917182] other info that might help us debug this: [ 39.917761] context-{5:5} [ 39.918079] 4 locks held by repro/837: [ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0 [ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0 [ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0 [ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix dead lock for suspend and resume When an application issues a query IOCTL while auto suspend is running, a deadlock can occur. The query path holds dev_lock and then calls pm_runtime_resume_and_get(), which waits for the ongoing suspend to complete. Meanwhile, the suspend callback attempts to acquire dev_lock and blocks, resulting in a deadlock. Fix this by releasing dev_lock before calling pm_runtime_resume_and_get() and reacquiring it after the call completes. Also acquire dev_lock in the resume callback to keep the locking consistent.

Spring MVC and WebFlux applications are vulnerable to stream corruption when using Server-Sent Events (SSE). This issue affects Spring Foundation: from 7.0.0 through 7.0.5, from 6.2.0 through 6.2.16, from 6.1.0 through 6.1.25, from 5.3.0 through 5.3.46.

Multiple Cisco products are affected by a vulnerability in the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart, resulting in an interruption of packet inspection. This vulnerability is due to an error in the binder module initialization logic of the Snort Detection Engine. An attacker could exploit this vulnerability by sending certain packets through an established connection that is parsed by Snort 3. A successful exploit could allow the attacker to cause a DoS condition when the Snort 3 Detection Engine restarts unexpectedly.

In the Linux kernel, the following vulnerability has been resolved: Revert "f2fs: block cache/dio write during f2fs_enable_checkpoint()" This reverts commit 196c81fdd438f7ac429d5639090a9816abb9760a. Original patch may cause below deadlock, revert it. write remount - write_begin - lock_page --- lock A - prepare_write_begin - f2fs_map_lock - f2fs_enable_checkpoint - down_write(cp_enable_rwsem) --- lock B - sync_inode_sb - writepages - lock_page --- lock A - down_read(cp_enable_rwsem) --- lock A

Improper Locking vulnerability (CWE-667) in Gallagher Morpho integration allows a privileged operator to cause a limited denial-of-service in the Command Centre Server. This issue affects Command Centre Server: 9.40 prior to vEL9.40.1976(MR1), 9.30 prior to vEL9.30.3382 (MR4), 9.20 prior to vEL9.20.3783 (MR6), 9.10 prior to vEL9.10.4647 (MR9), all versions of 9.00 and prior.