An unauthenticated command injection vulnerability exists in the D-Link DIR-878A1 router firmware FW101B04.bin. The vulnerability occurs in the 'SetDynamicDNSSettings' functionality, where the 'ServerAddress' and 'Hostname' parameters in prog.cgi are stored in NVRAM and later used by rc to construct system commands executed via twsystem(). An attacker can exploit this vulnerability remotely without authentication by sending a specially crafted HTTP request, leading to arbitrary command execution on the device.

A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `rc` binaries. The `sub_433188` function in `prog.cgi` stores user-supplied email configuration parameters (`EmailFrom`, `EmailTo`, `SMTPServerAddress`, `SMTPServerPort`, `AccountName`) in NVRAM via `nvram_safe_set`. These values are later retrieved in the `sub_448FDC` function of `rc` using `nvram_safe_get` and concatenated into shell commands executed via `twsystem()` without sanitization. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface.

A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `librcm.so` binaries. The `sub_4455BC` function in `prog.cgi` stores user-supplied `SetDMZSettings/IPAddress` values in NVRAM via `nvram_safe_set("dmz_ipaddr", ...)`. These values are later retrieved in the `DMZ_run` function of `librcm.so` using `nvram_safe_get` and concatenated into `iptables` shell commands executed via `twsystem()` without any sanitization. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface.

A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `rc` binaries. The `sub_432F60` function in `prog.cgi` stores user-supplied `SetSysLogSettings/IPAddress` values in NVRAM via `nvram_safe_set("SysLogRemote_IPAddress", ...)`. These values are later retrieved in the `sub_448DCC` function of `rc` using `nvram_safe_get` and concatenated into a shell command executed via `twsystem()` without any sanitization. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface.

A command injection vulnerability exists in the D-Link DIR-882 Router firmware DIR882A1_FW102B02 within the `prog.cgi` and `rc` binaries. The `sub_4438A4` function in `prog.cgi` stores user-supplied DDNS parameters (`ServerAddress` and `Hostname`) in NVRAM via `nvram_safe_set`. These values are later retrieved in the `start_DDNS_ipv4` function of `rc` using `nvram_safe_get` and concatenated into DDNS shell commands executed via `twsystem()` without proper sanitization. Partial string comparison is performed but is insufficient to prevent command injection. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device through specially crafted HTTP requests to the router's web interface.

A stack-based buffer overflow exists in the get_merge_mac function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to six user-supplied CGI parameters matching <parameter>_0~5 into a fixed-size buffer (a2) without proper bounds checking, appending colon delimiters during concatenation. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.

A command injection vulnerability exists in the D-Link DIR-823G router firmware DIR823G_V1.0.2B05_20181207.bin in the timelycheck and sysconf binaries, which process the /var/system/linux_vlan_reinit file. The vulnerability occurs because content read from this file is only partially validated for a prefix and then formatted using vsnprintf() before being executed with system(), allowing an attacker with write access to /var/system/linux_vlan_reinit to execute arbitrary commands on the device.

A stack-based buffer overflow vulnerability exists in the makeRequest.cgi binary of Linksys RE7000 routers (Firmware FW_v2.0.15_211230_1012). The arplookup function parses lines from /proc/net/arp using sscanf("%16s ... %18s ..."), storing results into buffers v6 (12 bytes) and v7 (20 bytes). Since the format specifiers allow up to 16 and 18 bytes respectively, oversized input can overflow the buffers, resulting in stack corruption. Local attackers controlling /proc/net/arp contents can exploit this issue to cause denial of service or potentially execute arbitrary code.

A stack-based buffer overflow vulnerability exists in the mtk_dut binary of Linksys E7350 routers (Firmware 1.1.00.032). The function sub_4045A8 reads up to 256 bytes from /sys/class/net/%s/address into a local buffer and then copies it into caller-provided buffer a1 using strcpy without boundary checks. Since a1 is often allocated with significantly smaller sizes (20-32 bytes), local attackers controlling the contents of /sys/class/net/%s/address can trigger buffer overflows, leading to memory corruption, denial of service, or potential arbitrary code execution.

A stack-based buffer overflow exists in the validate_static_route function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function improperly concatenates user-supplied CGI parameters (route_ipaddr_0~3, route_netmask_0~3, route_gateway_0~3) into fixed-size buffers (v6, v10, v14) without proper bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.

A stack-based buffer overflow vulnerability exists in the libshared.so library of Cisco Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The functions get_mac_from_ip and get_ip_from_mac use sscanf with overly permissive "%100s" format specifiers to parse entries from /proc/net/arp into fixed-size buffers (v6: 50 bytes, v7 sub-arrays: 50 bytes). This allows local attackers controlling the contents of /proc/net/arp to overflow stack buffers, leading to memory corruption, denial of service, or potential arbitrary code execution.

A stack-based buffer overflow exists in the httpd binary of Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The apply_cgi and block_cgi functions copy user-supplied input from the "url" CGI parameter into stack buffers (v36, v29) using sprintf without bounds checking. Because these buffers are allocated as single-byte variables, any non-empty input will trigger a buffer overflow. Remote attackers can exploit this vulnerability via crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.

A stack-based buffer overflow exists in the get_merge_ipaddr function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to four user-supplied CGI parameters matching <parameter>_0~3 into a fixed-size buffer (a2) without bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.

An unauthenticated command injection vulnerability exists in the Start_EPI function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The vulnerability occurs because user-supplied CGI parameters (wl_ant, wl_ssid, wl_rate, ttcp_num, ttcp_ip, ttcp_size) are concatenated into system command strings without proper sanitization and executed via wl_exec_cmd. Successful exploitation allows remote attackers to execute arbitrary commands on the device without authentication.

A stack buffer overflow vulnerability exists in the ToToLink LR1200GB (V9.1.0u.6619_B20230130) and NR1800X (V9.1.0u.6681_B20230703) Router firmware within the cstecgi.cgi binary (setDefResponse function). The binary reads the "IpAddress" parameter from a web request and copies it into a fixed-size stack buffer using strcpy() without any length validation. Maliciously crafted input can overflow the buffer, leading to potential arbitrary code execution or memory corruption, without requiring authentication.

An unauthenticated command injection vulnerability exists in the ToToLink LR1200GB Router firmware V9.1.0u.6619_B20230130 within the cstecgi.cgi binary (sub_41EC68 function). The binary reads the "imei" parameter from a web request and verifies only that it is 15 characters long. The parameter is then directly inserted into a system command using sprintf() and executed with system(). Maliciously crafted IMEI input can execute arbitrary commands on the router without authentication.

A local stack-based buffer overflow vulnerability exists in the infostat.cgi and cstecgi.cgi binaries of ToToLink routers (A720R V4.1.5cu.614_B20230630, LR1200GB V9.1.0u.6619_B20230130, and NR1800X V9.1.0u.6681_B20230703). Both programs parse the contents of /proc/net/arp using sscanf() with "%s" format specifiers into fixed-size stack buffers without length validation. Specifically, one function writes user-controlled data into a single-byte buffer, and the other into adjacent small arrays without bounds checking. An attacker who controls the contents of /proc/net/arp can trigger memory corruption, leading to denial of service or potential arbitrary code execution.

A stack buffer overflow exists in the ToToLink A720R Router firmware V4.1.5cu.614_B20230630 within the sysconf binary (sub_401EE0 function). The binary reads the /proc/stat file using fgets() into a local buffer and subsequently parses the line using sscanf() into a single-byte variable with the %s format specifier. Maliciously crafted /proc/stat content can overwrite adjacent stack memory, potentially allowing an attacker with filesystem write privileges to execute arbitrary code on the device.

A stack buffer overflow vulnerability exists in the ToToLink LR1200GB (V9.1.0u.6619_B20230130) and NR1800X (V9.1.0u.6681_B20230703) Router firmware within the cstecgi.cgi binary (sub_42F32C function). The web interface reads the "lang" parameter and constructs Help URL strings using sprintf() into fixed-size stack buffers without proper length validation. Maliciously crafted input can overflow these buffers, potentially leading to arbitrary code execution or memory corruption, without requiring authentication.

A command injection vulnerability exists in the ToToLink A720R Router firmware V4.1.5cu.614_B20230630 within the sysconf binary, specifically in the sub_40BFA4 function that handles network interface reinitialization from '/var/system/linux_vlan_reinit'. Input is only partially validated by checking the prefix of interface names, and is concatenated into shell commands executed via system() without escaping. An attacker with write access to this file can execute arbitrary commands on the device.

A command injection vulnerability exists in the ToToLink A720R Router firmware V4.1.5cu.614_B20230630 within the cloudupdate_check binary, specifically in the sub_402414 function that handles cloud update parameters. User-supplied 'magicid' and 'url' values are directly concatenated into shell commands and executed via system() without any sanitization or escaping. An unauthenticated remote attacker can exploit this vulnerability to execute arbitrary commands on the device.

Lichess lila before commit 11b4c0fb00f0ffd823246f839627005459c8f05c (2025-06-02) contains a Server-Side Request Forgery (SSRF) vulnerability in the game export API. The players parameter is passed directly to an internal HTTP client without validation, allowing remote attackers to force the server to send HTTP requests to arbitrary URLs

A flaw has been found in code-projects Responsive Hotel Site 1.0. The affected element is an unknown function of the file /admin/usersetting.php. Executing manipulation of the argument usname can lead to sql injection. The attack can be executed remotely. The exploit has been published and may be used.

A vulnerability was detected in code-projects Responsive Hotel Site 1.0. Impacted is an unknown function of the file /admin/usersettingdel.php. Performing manipulation of the argument eid results in sql injection. Remote exploitation of the attack is possible. The exploit is now public and may be used.

Frappe Learning is a learning system that helps users structure their content. Starting in version 2.0.0 and prior to version 2.41.0, when admins revoked a role from the user, the effect was not immediate because of caching. The issue has been fixed in version 2.41.0 by ensuring the cache is cleared after roles are updated.

Frappe Learning is a learning system that helps users structure their content. Starting in version 2.0.0 and prior to version 2.41.0, users were able to access the submissions made by other students The issue has been fixed in version 2.41.0 by ensuring proper roles and redirecting if accessed via direct URL.

File Browser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename and edit files. Versions prior to 2.45.1 have an Insecure Direct Object Reference (IDOR) vulnerability in the FileBrowser application's share deletion functionality. This vulnerability allows any authenticated user with share permissions to delete other users' shared links without authorization checks. The impact is significant as malicious actors can disrupt business operations by systematically removing shared files and links. This leads to denial of service for legitimate users, potential data loss in collaborative environments, and breach of data confidentiality agreements. In organizational settings, this could affect critical file sharing for projects, presentations, or document collaboration. Version 2.45.1 contains a fix for the issue.

DBLTek GoIP-1 firmware versions up to and including GHSFVT-1.1-67-5 contain a local file inclusion vulnerability. The device's web server exposes handlers (`frame.html` and `frame.A100.html`) that accept a path parameter (`content` or `sidebar`) which is not properly validated or canonicalized. An attacker can supply directory-traversal sequences to cause the server to read and return arbitrary filesystem files that the webserver user can access. Other GoIP models and firmware versions are likely affected. Exploitation evidence was observed by the Shadowserver Foundation on 2024-03-21 UTC.

The Epson Stylus SX510W embedded web management service fails to properly handle consecutive ampersand characters in query parameters when accessing /PRESENTATION/HTML/TOP/INDEX.HTML. A remote attacker can send a malformed request that triggers improper input parsing or memory handling, resulting in the printer process shutting down or powering off, causing a denial of service condition.

FiberHome AN5506-04-FA firmware versions up to and including RP2631 and HG6245D prior to RP2602 contain a stack-based buffer overflow, as the HTTP service ('webs') fails to enforce maximum lengths for Cookie header values. When a cookie longer than 511 bytes is processed, a stack buffer is overrun, leading to a crash or potential control of execution flow.

AUTOMGEN versions up to and including 8.0.0.7 (also referenced as 8.022) contain a vulnerability in that project file handling frees an object and subsequently dereferences the stale pointer when processing certain malformed fields. The dangling-pointer use enables an attacker to influence an indirect call through attacker-controlled memory, resulting in denial-of-service. In some conditions, remote code execution may be possible.

JVC VN-T IP-camera models firmware versions up to 2016-08-22 (confirmed on the VN-T216VPRU model) contain a directory traversal vulnerability in the checkcgi endpoint that accepts a user-controlled file parameter. An unauthenticated remote attacker can leverage this vulnerability to read arbitrary files on the device.

sudo-rs is a memory safe implementation of sudo and su written in Rust. With `Defaults targetpw` (or `Defaults rootpw`) enabled, the password of the target account (or root account) instead of the invoking user is used for authentication. sudo-rs starting in version 0.2.5 and prior to version 0.2.10 incorrectly recorded the invoking user’s UID instead of the authenticated-as user's UID in the authentication timestamp. Any later `sudo` invocation on the same terminal while the timestamp was still valid would use that timestamp, potentially bypassing new authentication even if the policy would have required it. A highly-privileged user (able to run commands as other users, or as root, through sudo) who knows one password of an account they are allowed to run commands as, would be able to run commands as any other account the policy permits them to run commands for, even if they don't know the password for those accounts. A common instance of this would be that a user can still use their own password to run commands as root (the default behaviour of `sudo`), effectively negating the intended behaviour of the `targetpw` or `rootpw` options. Version 0.2.10 contains a patch for the issue. Versions prior to 0.2.5 are not affected, since they do not offer `Defaults targetpw` or `Defaults rootpw`.

Longjing Technology BEMS API versions up to and including 1.21 contains an unauthenticated arbitrary file download vulnerability in the 'downloads' endpoint. The 'fileName' parameter is not properly sanitized, allowing attackers to craft traversal sequences and access sensitive files outside the intended directory.

Ozeki SMS Gateway versions up to and including 10.3.208 contain a path traversal vulnerability. Successful exploitation allows an unauthenticated attacker to use URL-encoded traversal sequences to read arbitrary files from the underlying filesystem with the privileges of the gateway service, leading to disclosure of sensitive information.

TEC-IT TBarCode version 11.15 contains a vulnerability in the TBarCode11.ocx ActiveX/OCX control's licensing handling (INI-file based) that can be abused to cause remote creation of files on the host filesystem. Depending on where files can be created and which filenames are allowed, this can allow attackers to write files that lead to code execution or persistence under the context of the hosting process.

Tinycontrol LAN Controller v3 (LK3) firmware versions up to 1.58a (hardware v3.8) contain a missing authentication vulnerability in the stm.cgi endpoint. A remote, unauthenticated attacker can send crafted requests to forcibly reboot the device or restore factory settings, leading to a denial of service and configuration loss.

UCanCode E-XD++ Visualization Enterprise Suite contains an untrusted pointer dereference vulnerability via the TKDRAWCAD.TKDrawCADCtrl.1 ActiveX control. This is because it exposes a RotateShape method that dereferences a user-supplied pointer without sufficient validation. A crafted input may cause the control to dereference an attacker-controlled pointer, enabling remote code execution in the context of the hosting process. The vulnerability requires user interaction (instantiation of the ActiveX control via a web page or a file).

cups-filters contains backends, filters, and other software required to get the cups printing service working on operating systems other than macos. In cups-filters prior to 1.28.18, by crafting a PDF file with a large `MediaBox` value, an attacker can cause CUPS-Filter 1.x’s `pdftoraster` tool to write beyond the bounds of an array. First, a PDF with a large `MediaBox` width value causes `header.cupsWidth` to become large. Next, the calculation of `bytesPerLine = (header.cupsBitsPerPixel * header.cupsWidth + 7) / 8` overflows, resulting in a small value. Then, `lineBuf` is allocated with the small `bytesPerLine` size. Finally, `convertLineChunked` calls `writePixel8`, which attempts to write to `lineBuf` outside of its buffer size (out of bounds write). In libcupsfilters, the maintainers found the same `bytesPerLine` multiplication without overflow check, but the provided test case does not cause an overflow there, because the values are different. Commit 50d94ca0f2fa6177613c97c59791bde568631865 contains a patch, which is incorporated into cups-filters version 1.28.18.

In the Linux kernel, the following vulnerability has been resolved: media: iris: fix module removal if firmware download failed Fix remove if firmware failed to load: qcom-iris aa00000.video-codec: Direct firmware load for qcom/vpu/vpu33_p4.mbn failed with error -2 qcom-iris aa00000.video-codec: firmware download failed qcom-iris aa00000.video-codec: core init failed then: $ echo aa00000.video-codec > /sys/bus/platform/drivers/qcom-iris/unbind Triggers: genpd genpd:1:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ video_cc_mvs0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#1: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ video_cc_mvs0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#2: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu_power_off_hw+0x48/0x58 [qcom_iris] iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris] iris_vpu_power_off+0x34/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- genpd genpd:0:aa00000.video-codec: Runtime PM usage count underflow! ------------[ cut here ]------------ gcc_video_axi0_clk already disabled WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#4: sh/542 <snip> pc : clk_core_disable+0xa4/0xac lr : clk_core_disable+0xa4/0xac <snip> Call trace: clk_core_disable+0xa4/0xac (P) clk_disable+0x30/0x4c iris_disable_unprepare_clock+0x20/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ------------[ cut here ]------------ gcc_video_axi0_clk already unprepared WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#4: sh/542 <snip> pc : clk_core_unprepare+0xf0/0x110 lr : clk_core_unprepare+0xf0/0x110 <snip> Call trace: clk_core_unprepare+0xf0/0x110 (P) clk_unprepare+0x2c/0x44 iris_disable_unprepare_clock+0x28/0x48 [qcom_iris] iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris] iris_vpu_power_off+0x48/0x84 [qcom_iris] iris_core_deinit+0x44/0xc8 [qcom_iris] iris_remove+0x20/0x48 [qcom_iris] platform_remove+0x20/0x30 device_remove+0x4c/0x80 <snip> ---[ end trace 0000000000000000 ]--- Skip deinit if initialization never succeeded.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-subdev: Fix alloc failure check in v4l2_subdev_call_state_try() v4l2_subdev_call_state_try() macro allocates a subdev state with __v4l2_subdev_state_alloc(), but does not check the returned value. If __v4l2_subdev_state_alloc fails, it returns an ERR_PTR, and that would cause v4l2_subdev_call_state_try() to crash. Add proper error handling to v4l2_subdev_call_state_try().

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_objref: validate objref and objrefmap expressions Referencing a synproxy stateful object from OUTPUT hook causes kernel crash due to infinite recursive calls: BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12) [...] Call Trace: __find_rr_leaf+0x99/0x230 fib6_table_lookup+0x13b/0x2d0 ip6_pol_route+0xa4/0x400 fib6_rule_lookup+0x156/0x240 ip6_route_output_flags+0xc6/0x150 __nf_ip6_route+0x23/0x50 synproxy_send_tcp_ipv6+0x106/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 nft_synproxy_do_eval+0x263/0x310 nft_do_chain+0x5a8/0x5f0 [nf_tables nft_do_chain_inet+0x98/0x110 nf_hook_slow+0x43/0xc0 __ip6_local_out+0xf0/0x170 ip6_local_out+0x17/0x70 synproxy_send_tcp_ipv6+0x1a2/0x200 synproxy_send_client_synack_ipv6+0x1aa/0x1f0 [...] Implement objref and objrefmap expression validate functions. Currently, only NFT_OBJECT_SYNPROXY object type requires validation. This will also handle a jump to a chain using a synproxy object from the OUTPUT hook. Now when trying to reference a synproxy object in the OUTPUT hook, nft will produce the following error: synproxy_crash.nft: Error: Could not process rule: Operation not supported synproxy name mysynproxy ^^^^^^^^^^^^^^^^^^^^^^^^

In the Linux kernel, the following vulnerability has been resolved: btrfs: avoid potential out-of-bounds in btrfs_encode_fh() The function btrfs_encode_fh() does not properly account for the three cases it handles. Before writing to the file handle (fh), the function only returns to the user BTRFS_FID_SIZE_NON_CONNECTABLE (5 dwords, 20 bytes) or BTRFS_FID_SIZE_CONNECTABLE (8 dwords, 32 bytes). However, when a parent exists and the root ID of the parent and the inode are different, the function writes BTRFS_FID_SIZE_CONNECTABLE_ROOT (10 dwords, 40 bytes). If *max_len is not large enough, this write goes out of bounds because BTRFS_FID_SIZE_CONNECTABLE_ROOT is greater than BTRFS_FID_SIZE_CONNECTABLE originally returned. This results in an 8-byte out-of-bounds write at fid->parent_root_objectid = parent_root_id. A previous attempt to fix this issue was made but was lost. https://lore.kernel.org/all/4CADAEEC020000780001B32C@vpn.id2.novell.com/ Although this issue does not seem to be easily triggerable, it is a potential memory corruption bug that should be fixed. This patch resolves the issue by ensuring the function returns the appropriate size for all three cases and validates that *max_len is large enough before writing any data.

In the Linux kernel, the following vulnerability has been resolved: sctp: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.

In the Linux kernel, the following vulnerability has been resolved: listmount: don't call path_put() under namespace semaphore Massage listmount() and make sure we don't call path_put() under the namespace semaphore. If we put the last reference we're fscked.

In the Linux kernel, the following vulnerability has been resolved: ipmi: Rework user message limit handling The limit on the number of user messages had a number of issues, improper counting in some cases and a use after free. Restructure how this is all done to handle more in the receive message allocation routine, so all refcouting and user message limit counts are done in that routine. It's a lot cleaner and safer.

In the Linux kernel, the following vulnerability has been resolved: kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths The usage of task_lock(tsk->group_leader) in sys_prlimit64()->do_prlimit() path is very broken. sys_prlimit64() does get_task_struct(tsk) but this only protects task_struct itself. If tsk != current and tsk is not a leader, this process can exit/exec and task_lock(tsk->group_leader) may use the already freed task_struct. Another problem is that sys_prlimit64() can race with mt-exec which changes ->group_leader. In this case do_prlimit() may take the wrong lock, or (worse) ->group_leader may change between task_lock() and task_unlock(). Change sys_prlimit64() to take tasklist_lock when necessary. This is not nice, but I don't see a better fix for -stable.

In the Linux kernel, the following vulnerability has been resolved: Squashfs: reject negative file sizes in squashfs_read_inode() Syskaller reports a "WARNING in ovl_copy_up_file" in overlayfs. This warning is ultimately caused because the underlying Squashfs file system returns a file with a negative file size. This commit checks for a negative file size and returns EINVAL. [phillip@squashfs.org.uk: only need to check 64 bit quantity]

In the Linux kernel, the following vulnerability has been resolved: page_pool: Fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches Helge reported that the introduction of PP_MAGIC_MASK let to crashes on boot on his 32-bit parisc machine. The cause of this is the mask is set too wide, so the page_pool_page_is_pp() incurs false positives which crashes the machine. Just disabling the check in page_pool_is_pp() will lead to the page_pool code itself malfunctioning; so instead of doing this, this patch changes the define for PP_DMA_INDEX_BITS to avoid mistaking arbitrary kernel pointers for page_pool-tagged pages. The fix relies on the kernel pointers that alias with the pp_magic field always being above PAGE_OFFSET. With this assumption, we can use the lowest bit of the value of PAGE_OFFSET as the upper bound of the PP_DMA_INDEX_MASK, which should avoid the false positives. Because we cannot rely on PAGE_OFFSET always being a compile-time constant, nor on it always being >0, we fall back to disabling the dma_index storage when there are not enough bits available. This leaves us in the situation we were in before the patch in the Fixes tag, but only on a subset of architecture configurations. This seems to be the best we can do until the transition to page types in complete for page_pool pages. v2: - Make sure there's at least 8 bits available and that the PAGE_OFFSET bit calculation doesn't wrap

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid potential buffer over-read in parse_apply_sb_mount_options() Unlike other strings in the ext4 superblock, we rely on tune2fs to make sure s_mount_opts is NUL terminated. Harden parse_apply_sb_mount_options() by treating s_mount_opts as a potential __nonstring.

In the Linux kernel, the following vulnerability has been resolved: media: mc: Clear minor number before put device The device minor should not be cleared after the device is released.