A command injection vulnerability in the function recvSlaveCloudCheckStatus of TOTOLINK Technology routers T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 and T10 V2_Firmware V4.1.8cu.5207_B20210320 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A vulnerability was identified in D-Link DIR-860L 2.04.B04. This affects the function ssdpcgi_main of the file htdocs/cgibin of the component Simple Service Discovery Protocol. The manipulation leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A command injection vulnerability in the function recv_mesh_info_sync of TOTOLINK Technology router T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A command injection vulnerability in the function setUpgradeFW of TOTOLINK Technology router T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A command injection vulnerability in the function meshSlaveUpdate of TOTOLINK Technology routers T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 and T10 V2_Firmware V4.1.8cu.5207_B20210320 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A command injection vulnerability in the function updateWifiInfo of TOTOLINK Technology routers T6 V3_Firmware T6_V3_V4.1.5cu.748_B20211015 and T10 V2_Firmware V4.1.8cu.5207_B20210320 allows attackers to execute arbitrary commands via a crafted MQTT packet.

A vulnerability was found in Synway SMG Gateway Management Software up to 20250204. It has been rated as critical. This issue affects some unknown processing of the file 9-12ping.php. The manipulation of the argument retry leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in D-Link DIR-816 1.10CNB05. Affected is the function setipsec_config of the file /goform/setipsec_config. The manipulation of the argument localIP/remoteIP leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this vulnerability is the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Fujian Kelixun 1.0. It has been classified as critical. This affects an unknown part of the file /app/fax/fax_view.php of the component Filename Handler. The manipulation of the argument fax_file leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

In mversion before 2.0.0, there is a command injection vulnerability. This issue may lead to remote code execution if a client of the library calls the vulnerable method with untrusted input. This vulnerability is patched by version 2.0.0. Previous releases are deprecated in npm. As a workaround, make sure to escape git commit messages when using the commitMessage option for the update function.

Command Injection in Nagios Fusion 4.1.8 and earlier allows for Privilege Escalation to nagios.

Codemers KLIMS 1.6.DEV allows Python code injection. A user can provide Python code as an input value for a parameter or qualifier (such as for sorting), which will get executed on the server side.

This affects all versions of package node-latex-pdf.

This affects all versions of package curljs.

This affects all versions of package google-cloudstorage-commands.

systeminformation is an npm package that provides system and OS information library for node.js. In systeminformation before version 4.26.2 there is a command injection vulnerability. Problem was fixed in version 4.26.2 with a shell string sanitation fix.

The vulnerability have been reported to affect earlier versions of QTS. If exploited, this command injection vulnerability could allow remote attackers to run arbitrary commands. This issue affects: QNAP Systems Inc. Helpdesk versions prior to 3.0.3.

A command injection vulnerability has been reported to affect QTS and QuTS hero. If exploited, this vulnerability allows attackers to execute arbitrary commands in a compromised application. We have already fixed this vulnerability in the following versions: QTS 4.5.2.1566 Build 20210202 and later QTS 4.5.1.1495 Build 20201123 and later QTS 4.3.6.1620 Build 20210322 and later QTS 4.3.4.1632 Build 20210324 and later QTS 4.3.3.1624 Build 20210416 and later QTS 4.2.6 Build 20210327 and later QuTS hero h4.5.1.1491 build 20201119 and later

A vulnerability, which was classified as critical, has been found in SourceCodester Web-based Pharmacy Product Management System 1.0. This issue affects some unknown processing of the file backup.php of the component Database Backup Handler. The manipulation of the argument txtdbname leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in Digital China DCME-520 up to 20250320. This issue affects some unknown processing of the file /usr/local/WWW/function/audit/newstatistics/mon_merge_stat_hist.php. The manipulation of the argument type_name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well.

Adobe Experience Manager versions 6.5, 6.4, 6.3 and 6.2 have a command injection vulnerability. Successful exploitation could lead to arbitrary code execution.

An issue was discovered in Donfig 0.3.0. There is a vulnerability in the collect_yaml method in config_obj.py. It can execute arbitrary Python commands, resulting in command execution.

Adobe Campaign Classic version 18.10.5-8984 and earlier versions have a Command injection vulnerability. Successful exploitation could lead to Arbitrary Code Execution in the context of the current user.

Edgecore ECS2020 Firmware 1.0.0.0 devices allow Unauthenticated Command Injection via the command1 HTTP header to the /EXCU_SHELL URI.

Accellion File Transfer Appliance version FTA_8_0_540 suffers from an instance of CWE-77: Improper Neutralization of Special Elements used in a Command ('Command Injection').

A remote code execution vulnerability in development mode Rails <5.2.2.1, <6.0.0.beta3 can allow an attacker to guess the automatically generated development mode secret token. This secret token can be used in combination with other Rails internals to escalate to a remote code execution exploit.

An attacker can use the format parameter to inject arbitrary commands in the npm package morgan < 1.9.1.

A vulnerability has been identified in Spectrum Power 4 (with Web Office Portal). An attacker with network access to the web server on port 80/TCP or 443/TCP could execute system commands with administrative privileges. The security vulnerability could be exploited by an unauthenticated attacker with network access to the affected service. No user interaction is required to exploit this security vulnerability. Successful exploitation of the security vulnerability compromises confidentiality, integrity or availability of the targeted system. At the time of advisory publication no public exploitation of this security vulnerability was known.

sapi/cgi/cgi_main.c in PHP before 5.3.12 and 5.4.x before 5.4.2, when configured as a CGI script (aka php-cgi), does not properly handle query strings that lack an = (equals sign) character, which allows remote attackers to execute arbitrary code by placing command-line options in the query string, related to lack of skipping a certain php_getopt for the 'd' case.

An issue was discovered in B&R Industrial Automation APROL before R4.2 V7.08. The AprolLoader could be used to inject and execute arbitrary unintended commands via an unspecified attack scenario, a different vulnerability than CVE-2019-16364.

An issue was discovered in B&R Industrial Automation APROL before R4.2 V7.08. Some web scripts in the web interface allowed injection and execution of arbitrary unintended commands on the web server, a different vulnerability than CVE-2019-16364.

go-getter up to 1.5.11 and 2.0.2 allowed arbitrary host access via go-getter path traversal, symlink processing, and command injection flaws. Fixed in 1.6.1 and 2.1.0.

The Platform component of Mitel OpenScape 4000 and OpenScape 4000 Manager V11 R0.22.0 through V11 R0.22.1, V10 R1.54.0 through V10 R1.54.1, and V10 R1.42.6 and earlier could allow an unauthenticated attacker to conduct a command injection attack due to insufficient parameter sanitization. A successful exploit could allow an attacker to execute arbitrary commands within the same privilege level as the web access process.

A vulnerability was found in NUUO Camera up to 20250203. It has been declared as critical. This vulnerability affects the function print_file of the file /handle_config.php. The manipulation of the argument log leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Raisecom Multi-Service Intelligent Gateway up to 20250208. It has been declared as critical. This vulnerability affects unknown code of the file /vpn/vpn_template_style.php of the component Request Parameter Handler. The manipulation of the argument stylenum leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection security vulnerability has been identified in HPE Nimble Storage Hybrid Flash Arrays, HPE Nimble Storage All Flash Arrays and HPE Nimble Storage Secondary Flash Arrays that could allow an attacker to execute arbitrary commands on a Nimble appliance. HPE has made the following software updates to resolve the vulnerability in HPE Nimble Storage: 5.0.10.100 or later, 5.2.1.0 or later, 6.0.0.100 or later.

Cribl UI 1.5.0 allows remote attackers to run arbitrary commands via an unauthenticated web request.

The GitController in Jakub Chodounsky Bonobo Git Server before 6.5.0 allows execution of arbitrary commands in the context of the web server via a crafted http request.

An issue in the component /models/config.py of Whoogle search v0.9.0 allows attackers to execute arbitrary code via supplying a crafted search query.

CImg The CImg Library v.2.3.3 and earlier is affected by: command injection. The impact is: RCE. The component is: load_network() function. The attack vector is: Loading an image from a user-controllable url can lead to command injection, because no string sanitization is done on the url. The fixed version is: v.2.3.4.

A vulnerability in lack of validation of user-supplied parameters pass to XML-RPC calls on SonicWall Global Management System (GMS) virtual appliance's, allow remote user to execute arbitrary code. This vulnerability affected GMS version 8.1 and earlier.

We have already fixed this vulnerability in the following versions of QVR: QVR 5.1.6 build 20220401 and later

In Schneider Electric U.motion Builder software versions prior to v1.3.4, a remote command injection allows authentication bypass.

TOTOLINK N600R V4.3.0cu.7570_B20200620 was discovered to contain a command injection vulnerability via the langType parameter in the login interface.

TOTOLINK N600R V4.3.0cu.7570_B20200620 was discovered to contain a command injection vulnerability via the pingCheck function.

Concatenating unsanitized user input in the `whereis` npm module < 0.4.1 allowed an attacker to execute arbitrary commands. The `whereis` module is deprecated and it is recommended to use the `which` npm module instead.

Tenda routers G1 and G3 v15.11.0.17(9502)_CN were discovered to contain a command injection vulnerability in the function formSetIpSecTunnel. This vulnerability allows attackers to execute arbitrary commands via the IPsecLocalNet and IPsecRemoteNet parameters.