MUNGE is an authentication service for creating and validating user credentials. From 0.5 to 0.5.17, local attacker can exploit a buffer overflow vulnerability in munged (the MUNGE authentication daemon) to leak cryptographic key material from process memory. With the leaked key material, the attacker could forge arbitrary MUNGE credentials to impersonate any user (including root) to services that rely on MUNGE for authentication. The vulnerability allows a buffer overflow by sending a crafted message with an oversized address length field, corrupting munged's internal state and enabling extraction of the MAC subkey used for credential verification. This vulnerability is fixed in 0.5.18.

Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group ). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS. If t he fields of `PID_IDENTITY_TOKEN` or `PID_PERMISSIONS_TOKEN` in the DATA Submessage are tampered with — specifically by ta mpering with the the `vecsize` value read by `readOctetVector` — a 32-bit integer overflow can occur, causing `std::vector ::resize` to request an attacker-controlled size and quickly trigger OOM and remote process termination. Versions 3.4.1, 3 .3.1, and 2.6.11 patch the issue.

Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group ). Prior to versions 3.4.1, 3.3.1, and 2.6.11, a heap buffer overflow exists in the Fast-DDS DATA_FRAG receive path. An un authenticated sender can transmit a single malformed RTPS DATA_FRAG packet where `fragmentSize` and `sampleSize` are craft ed to violate internal assumptions. Due to a 4-byte alignment step during fragment metadata initialization, the code write s past the end of the allocated payload buffer, causing immediate crash (DoS) and potentially enabling memory corruption ( RCE risk). Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue.

Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group ). ParticipantGenericMessage is the DDS Security control-message container that carries not only the handshake but also on going security-control traffic after the handshake, such as crypto-token exchange, rekeying, re-authentication, and token delivery for newly appearing endpoints. On receive, the CDR parser is invoked first and deserializes the `message_data` (i .e., the `DataHolderSeq`) via the `readParticipantGenericMessage → readDataHolderSeq` path. The `DataHolderSeq` is parsed sequentially: a sequence count (`uint32`), and for each DataHolder the `class_id` string (e.g. `DDS:Auth:PKI-DH:1.0+Req`), string properties (a sequence of key/value pairs), and binary properties (a name plus an octet-vector). The parser operat es at a stateless level and does not know higher-layer state (for example, whether the handshake has already completed), s o it fully unfolds the structure before distinguishing legitimate from malformed traffic. Because RTPS permits duplicates, delays, and retransmissions, a receiver must perform at least minimal structural parsing to check identity and sequence n umbers before discarding or processing a message; the current implementation, however, does not "peek" only at a minimal header and instead parses the entire `DataHolderSeq`. As a result, prior to versions 3.4.1, 3.3.1, and 2.6.11, this parsi ng behavior can trigger an out-of-memory condition and remotely terminate the process. Versions 3.4.1, 3.3.1, and 2.6.11 p atch the issue.

Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group ). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an SPDP packet sent by a publisher causes a heap buffer overflow, resulting in remote termination of Fast-DDS. If the fields of `PID_IDENTITY_TOKEN` or `PID_PERMISSIONS_TOKEN` in the DATA Submessage are tampered with — specially `readOctetVector` reads an unchecked `vecsize` that is propagated unchanged into `readData` as the `length` parameter — the attacker-contro lled `vecsize` can trigger a 32-bit integer overflow during the `length` calculation. That overflow can cause large alloca tion attempt that quickly leads to OOM, enabling a remotely-triggerable denial-of-service and remote process termination. Versions 3.4.1, 3.3.1, and 2.6.11 patch the issue.

Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group ). Prior to versions 3.4.1, 3.3.1, and 2.6.11, when the security mode is enabled, modifying the DATA Submessage within an SPDP packet sent by a publisher causes an Out-Of-Memory (OOM) condition, resulting in remote termination of Fast-DDS. If t he fields of PID_IDENTITY_TOKEN or PID_PERMISSION_TOKEN in the DATA Submessage — specifically by tampering with the length field in readPropertySeq — are modified, an integer overflow occurs, leading to an OOM during the resize operation. Versi ons 3.4.1, 3.3.1, and 2.6.11 patch the issue.

tcpflow is a TCP/IP packet demultiplexer. In versions up to and including 1.61, wifipcap parses 802.11 management frame elements and performs a length check on the wrong field when handling the TIM element. A crafted frame with a large TIM length can cause a 1-byte out-of-bounds write past `tim.bitmap[251]`. The overflow is small and DoS is the likely impact; code execution is potential, but still up in the air. The affected structure is stack-allocated in `handle_beacon()` and related handlers. As of time of publication, no known patches are available.

xrdp is an open source RDP server. xrdp before v0.10.5 contains an unauthenticated stack-based buffer overflow vulnerability. The issue stems from improper bounds checking when processing user domain information during the connection sequence. If exploited, the vulnerability could allow remote attackers to execute arbitrary code on the target system. The vulnerability allows an attacker to overwrite the stack buffer and the return address, which could theoretically be used to redirect the execution flow. The impact of this vulnerability is lessened if a compiler flag has been used to build the xrdp executable with stack canary protection. If this is the case, a second vulnerability would need to be used to leak the stack canary value. Upgrade to version 0.10.5 to receive a patch. Additionally, do not rely on stack canary protection on production systems.

telnetd in GNU Inetutils through 2.7 allows remote authentication bypass via a "-f root" value for the USER environment variable.

net-snmp is a SNMP application library, tools and daemon. Prior to versions 5.9.5 and 5.10.pre2, a specially crafted packet to an net-snmp snmptrapd daemon can cause a buffer overflow and the daemon to crash. This issue has been patched in versions 5.9.5 and 5.10.pre2.

Freedombox before 25.17.1 does not set proper permissions for the backups-data directory, allowing the reading of dump files of databases.

NULL pointer dereference in TagSection.keys() in python-apt on APT-based Linux systems allows a local attacker to cause a denial of service (process crash) via a crafted deb822 file with a malformed non-UTF-8 key.

alinto SOGo 5.12.3 is vulnerable to Cross Site Scripting (XSS) via the "userName" parameter.

Pdfminer.six is a community maintained fork of the original PDFMiner, a tool for extracting information from PDF documents. Prior to version 20251107, pdfminer.six will execute arbitrary code from a malicious pickle file if provided with a malicious PDF file. The `CMapDB._load_data()` function in pdfminer.six uses `pickle.loads()` to deserialize pickle files. These pickle files are supposed to be part of the pdfminer.six distribution stored in the `cmap/` directory, but a malicious PDF can specify an alternative directory and filename as long as the filename ends in `.pickle.gz`. A malicious, zipped pickle file can then contain code which will automatically execute when the PDF is processed. Version 20251107 fixes the issue.

GIMP XWD File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of XWD files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27823.

GIMP DCM File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of DCM files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27863.

GIMP HDR File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of HDR files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27803.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/ees When we don't have a clock specified in the device tree, we have no way to ensure the BAM is on. This is often the case for remotely-controlled or remotely-powered BAM instances. In this case, we need to read num-channels from the DT to have all the necessary information to complete probing. However, at the moment invalid device trees without clock and without num-channels still continue probing, because the error handling is missing return statements. The driver will then later try to read the number of channels from the registers. This is unsafe, because it relies on boot firmware and lucky timing to succeed. Unfortunately, the lack of proper error handling here has been abused for several Qualcomm SoCs upstream, causing early boot crashes in several situations [1, 2]. Avoid these early crashes by erroring out when any of the required DT properties are missing. Note that this will break some of the existing DTs upstream (mainly BAM instances related to the crypto engine). However, clearly these DTs have never been tested properly, since the error in the kernel log was just ignored. It's safer to disable the crypto engine for these broken DTBs. [1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/ [2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/

In the Linux kernel, the following vulnerability has been resolved: pcmcia: Add error handling for add_interval() in do_validate_mem() In the do_validate_mem(), the call to add_interval() does not handle errors. If kmalloc() fails in add_interval(), it could result in a null pointer being inserted into the linked list, leading to illegal memory access when sub_interval() is called next. This patch adds an error handling for the add_interval(). If add_interval() returns an error, the function will return early with the error code.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/reclaim: avoid divide-by-zero in damon_reclaim_apply_parameters() When creating a new scheme of DAMON_RECLAIM, the calculation of 'min_age_region' uses 'aggr_interval' as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs.

In the Linux kernel, the following vulnerability has been resolved: tracing: Silence warning when chunk allocation fails in trace_pid_write Syzkaller trigger a fault injection warning: WARNING: CPU: 1 PID: 12326 at tracepoint_add_func+0xbfc/0xeb0 Modules linked in: CPU: 1 UID: 0 PID: 12326 Comm: syz.6.10325 Tainted: G U 6.14.0-rc5-syzkaller #0 Tainted: [U]=USER Hardware name: Google Compute Engine/Google Compute Engine RIP: 0010:tracepoint_add_func+0xbfc/0xeb0 kernel/tracepoint.c:294 Code: 09 fe ff 90 0f 0b 90 0f b6 74 24 43 31 ff 41 bc ea ff ff ff RSP: 0018:ffffc9000414fb48 EFLAGS: 00010283 RAX: 00000000000012a1 RBX: ffffffff8e240ae0 RCX: ffffc90014b78000 RDX: 0000000000080000 RSI: ffffffff81bbd78b RDI: 0000000000000001 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffffffffffffffef R13: 0000000000000000 R14: dffffc0000000000 R15: ffffffff81c264f0 FS: 00007f27217f66c0(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e80dff8 CR3: 00000000268f8000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tracepoint_probe_register_prio+0xc0/0x110 kernel/tracepoint.c:464 register_trace_prio_sched_switch include/trace/events/sched.h:222 [inline] register_pid_events kernel/trace/trace_events.c:2354 [inline] event_pid_write.isra.0+0x439/0x7a0 kernel/trace/trace_events.c:2425 vfs_write+0x24c/0x1150 fs/read_write.c:677 ksys_write+0x12b/0x250 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f We can reproduce the warning by following the steps below: 1. echo 8 >> set_event_notrace_pid. Let tr->filtered_pids owns one pid and register sched_switch tracepoint. 2. echo ' ' >> set_event_pid, and perform fault injection during chunk allocation of trace_pid_list_alloc. Let pid_list with no pid and assign to tr->filtered_pids. 3. echo ' ' >> set_event_pid. Let pid_list is NULL and assign to tr->filtered_pids. 4. echo 9 >> set_event_pid, will trigger the double register sched_switch tracepoint warning. The reason is that syzkaller injects a fault into the chunk allocation in trace_pid_list_alloc, causing a failure in trace_pid_list_set, which may trigger double register of the same tracepoint. This only occurs when the system is about to crash, but to suppress this warning, let's add failure handling logic to trace_pid_list_set.

In the Linux kernel, the following vulnerability has been resolved: tcp_bpf: Call sk_msg_free() when tcp_bpf_send_verdict() fails to allocate psock->cork. syzbot reported the splat below. [0] The repro does the following: 1. Load a sk_msg prog that calls bpf_msg_cork_bytes(msg, cork_bytes) 2. Attach the prog to a SOCKMAP 3. Add a socket to the SOCKMAP 4. Activate fault injection 5. Send data less than cork_bytes At 5., the data is carried over to the next sendmsg() as it is smaller than the cork_bytes specified by bpf_msg_cork_bytes(). Then, tcp_bpf_send_verdict() tries to allocate psock->cork to hold the data, but this fails silently due to fault injection + __GFP_NOWARN. If the allocation fails, we need to revert the sk->sk_forward_alloc change done by sk_msg_alloc(). Let's call sk_msg_free() when tcp_bpf_send_verdict fails to allocate psock->cork. The "*copied" also needs to be updated such that a proper error can be returned to the caller, sendmsg. It fails to allocate psock->cork. Nothing has been corked so far, so this patch simply sets "*copied" to 0. [0]: WARNING: net/ipv4/af_inet.c:156 at inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156, CPU#1: syz-executor/5983 Modules linked in: CPU: 1 UID: 0 PID: 5983 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156 Code: 0f 0b 90 e9 62 fe ff ff e8 7a db b5 f7 90 0f 0b 90 e9 95 fe ff ff e8 6c db b5 f7 90 0f 0b 90 e9 bb fe ff ff e8 5e db b5 f7 90 <0f> 0b 90 e9 e1 fe ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 9f fc RSP: 0018:ffffc90000a08b48 EFLAGS: 00010246 RAX: ffffffff8a09d0b2 RBX: dffffc0000000000 RCX: ffff888024a23c80 RDX: 0000000000000100 RSI: 0000000000000fff RDI: 0000000000000000 RBP: 0000000000000fff R08: ffff88807e07c627 R09: 1ffff1100fc0f8c4 R10: dffffc0000000000 R11: ffffed100fc0f8c5 R12: ffff88807e07c380 R13: dffffc0000000000 R14: ffff88807e07c60c R15: 1ffff1100fc0f872 FS: 00005555604c4500(0000) GS:ffff888125af1000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555604df5c8 CR3: 0000000032b06000 CR4: 00000000003526f0 Call Trace: <IRQ> __sk_destruct+0x86/0x660 net/core/sock.c:2339 rcu_do_batch kernel/rcu/tree.c:2605 [inline] rcu_core+0xca8/0x1770 kernel/rcu/tree.c:2861 handle_softirqs+0x286/0x870 kernel/softirq.c:579 __do_softirq kernel/softirq.c:613 [inline] invoke_softirq kernel/softirq.c:453 [inline] __irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680 irq_exit_rcu+0x9/0x30 kernel/softirq.c:696 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1052 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1052 </IRQ>

In the Linux kernel, the following vulnerability has been resolved: i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error path If request_irq() in i40e_vsi_request_irq_msix() fails in an iteration later than the first, the error path wants to free the IRQs requested so far. However, it uses the wrong dev_id argument for free_irq(), so it does not free the IRQs correctly and instead triggers the warning: Trying to free already-free IRQ 173 WARNING: CPU: 25 PID: 1091 at kernel/irq/manage.c:1829 __free_irq+0x192/0x2c0 Modules linked in: i40e(+) [...] CPU: 25 UID: 0 PID: 1091 Comm: NetworkManager Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy) Hardware name: [...] RIP: 0010:__free_irq+0x192/0x2c0 [...] Call Trace: <TASK> free_irq+0x32/0x70 i40e_vsi_request_irq_msix.cold+0x63/0x8b [i40e] i40e_vsi_request_irq+0x79/0x80 [i40e] i40e_vsi_open+0x21f/0x2f0 [i40e] i40e_open+0x63/0x130 [i40e] __dev_open+0xfc/0x210 __dev_change_flags+0x1fc/0x240 netif_change_flags+0x27/0x70 do_setlink.isra.0+0x341/0xc70 rtnl_newlink+0x468/0x860 rtnetlink_rcv_msg+0x375/0x450 netlink_rcv_skb+0x5c/0x110 netlink_unicast+0x288/0x3c0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x3a2/0x3d0 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x82/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> ---[ end trace 0000000000000000 ]--- Use the same dev_id for free_irq() as for request_irq(). I tested this with inserting code to fail intentionally.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters() Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters application". DAMON's RECLAIM and LRU_SORT modules perform no validation on user-configured parameters during application, which may lead to division-by-zero errors. Avoid the divide-by-zero by adding validation checks when DAMON modules attempt to apply the parameters. This patch (of 2): During the calculation of 'hot_thres' and 'cold_thres', either 'sample_interval' or 'aggr_interval' is used as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs. Additionally, since 'aggr_interval' is already required to be set no smaller than 'sample_interval' in damon_set_attrs(), only the case where 'sample_interval' is zero needs to be checked.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: stm32_fmc2: avoid overlapping mappings on ECC buffer Avoid below overlapping mappings by using a contiguous non-cacheable buffer. [ 4.077708] DMA-API: stm32_fmc2_nfc 48810000.nand-controller: cacheline tracking EEXIST, overlapping mappings aren't supported [ 4.089103] WARNING: CPU: 1 PID: 44 at kernel/dma/debug.c:568 add_dma_entry+0x23c/0x300 [ 4.097071] Modules linked in: [ 4.100101] CPU: 1 PID: 44 Comm: kworker/u4:2 Not tainted 6.1.82 #1 [ 4.106346] Hardware name: STMicroelectronics STM32MP257F VALID1 SNOR / MB1704 (LPDDR4 Power discrete) + MB1703 + MB1708 (SNOR MB1730) (DT) [ 4.118824] Workqueue: events_unbound deferred_probe_work_func [ 4.124674] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.131624] pc : add_dma_entry+0x23c/0x300 [ 4.135658] lr : add_dma_entry+0x23c/0x300 [ 4.139792] sp : ffff800009dbb490 [ 4.143016] x29: ffff800009dbb4a0 x28: 0000000004008022 x27: ffff8000098a6000 [ 4.150174] x26: 0000000000000000 x25: ffff8000099e7000 x24: ffff8000099e7de8 [ 4.157231] x23: 00000000ffffffff x22: 0000000000000000 x21: ffff8000098a6a20 [ 4.164388] x20: ffff000080964180 x19: ffff800009819ba0 x18: 0000000000000006 [ 4.171545] x17: 6361727420656e69 x16: 6c6568636163203a x15: 72656c6c6f72746e [ 4.178602] x14: 6f632d646e616e2e x13: ffff800009832f58 x12: 00000000000004ec [ 4.185759] x11: 00000000000001a4 x10: ffff80000988af58 x9 : ffff800009832f58 [ 4.192916] x8 : 00000000ffffefff x7 : ffff80000988af58 x6 : 80000000fffff000 [ 4.199972] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 4.207128] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000812d2c40 [ 4.214185] Call trace: [ 4.216605] add_dma_entry+0x23c/0x300 [ 4.220338] debug_dma_map_sg+0x198/0x350 [ 4.224373] __dma_map_sg_attrs+0xa0/0x110 [ 4.228411] dma_map_sg_attrs+0x10/0x2c [ 4.232247] stm32_fmc2_nfc_xfer.isra.0+0x1c8/0x3fc [ 4.237088] stm32_fmc2_nfc_seq_read_page+0xc8/0x174 [ 4.242127] nand_read_oob+0x1d4/0x8e0 [ 4.245861] mtd_read_oob_std+0x58/0x84 [ 4.249596] mtd_read_oob+0x90/0x150 [ 4.253231] mtd_read+0x68/0xac

In the Linux kernel, the following vulnerability has been resolved: mm/slub: avoid accessing metadata when pointer is invalid in object_err() object_err() reports details of an object for further debugging, such as the freelist pointer, redzone, etc. However, if the pointer is invalid, attempting to access object metadata can lead to a crash since it does not point to a valid object. One known path to the crash is when alloc_consistency_checks() determines the pointer to the allocated object is invalid because of a freelist corruption, and calls object_err() to report it. The debug code should report and handle the corruption gracefully and not crash in the process. In case the pointer is NULL or check_valid_pointer() returns false for the pointer, only print the pointer value and skip accessing metadata.

In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: do not check confirmed bit in br_nf_local_in() after confirm When send a broadcast packet to a tap device, which was added to a bridge, br_nf_local_in() is called to confirm the conntrack. If another conntrack with the same hash value is added to the hash table, which can be triggered by a normal packet to a non-bridge device, the below warning may happen. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 96 at net/bridge/br_netfilter_hooks.c:632 br_nf_local_in+0x168/0x200 CPU: 1 UID: 0 PID: 96 Comm: tap_send Not tainted 6.17.0-rc2-dirty #44 PREEMPT(voluntary) RIP: 0010:br_nf_local_in+0x168/0x200 Call Trace: <TASK> nf_hook_slow+0x3e/0xf0 br_pass_frame_up+0x103/0x180 br_handle_frame_finish+0x2de/0x5b0 br_nf_hook_thresh+0xc0/0x120 br_nf_pre_routing_finish+0x168/0x3a0 br_nf_pre_routing+0x237/0x5e0 br_handle_frame+0x1ec/0x3c0 __netif_receive_skb_core+0x225/0x1210 __netif_receive_skb_one_core+0x37/0xa0 netif_receive_skb+0x36/0x160 tun_get_user+0xa54/0x10c0 tun_chr_write_iter+0x65/0xb0 vfs_write+0x305/0x410 ksys_write+0x60/0xd0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ---[ end trace 0000000000000000 ]--- To solve the hash conflict, nf_ct_resolve_clash() try to merge the conntracks, and update skb->_nfct. However, br_nf_local_in() still use the old ct from local variable 'nfct' after confirm(), which leads to this warning. If confirm() does not insert the conntrack entry and return NF_DROP, the warning may also occur. There is no need to reserve the WARN_ON_ONCE, just remove it.

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: Initialize the chan_stats array to zero The adapter->chan_stats[] array is initialized in mwifiex_init_channel_scan_gap() with vmalloc(), which doesn't zero out memory. The array is filled in mwifiex_update_chan_statistics() and then the user can query the data in mwifiex_cfg80211_dump_survey(). There are two potential issues here. What if the user calls mwifiex_cfg80211_dump_survey() before the data has been filled in. Also the mwifiex_update_chan_statistics() function doesn't necessarily initialize the whole array. Since the array was not initialized at the start that could result in an information leak. Also this array is pretty small. It's a maximum of 900 bytes so it's more appropriate to use kcalloc() instead vmalloc().

VMware Aria Operations and VMware Tools contain a local privilege escalation vulnerability. A malicious local actor with non-administrative privileges having access to a VM with VMware Tools installed and managed by Aria Operations with SDMP enabled may exploit this vulnerability to escalate privileges to root on the same VM.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix recursive semaphore deadlock in fiemap call syzbot detected a OCFS2 hang due to a recursive semaphore on a FS_IOC_FIEMAP of the extent list on a specially crafted mmap file. context_switch kernel/sched/core.c:5357 [inline] __schedule+0x1798/0x4cc0 kernel/sched/core.c:6961 __schedule_loop kernel/sched/core.c:7043 [inline] schedule+0x165/0x360 kernel/sched/core.c:7058 schedule_preempt_disabled+0x13/0x30 kernel/sched/core.c:7115 rwsem_down_write_slowpath+0x872/0xfe0 kernel/locking/rwsem.c:1185 __down_write_common kernel/locking/rwsem.c:1317 [inline] __down_write kernel/locking/rwsem.c:1326 [inline] down_write+0x1ab/0x1f0 kernel/locking/rwsem.c:1591 ocfs2_page_mkwrite+0x2ff/0xc40 fs/ocfs2/mmap.c:142 do_page_mkwrite+0x14d/0x310 mm/memory.c:3361 wp_page_shared mm/memory.c:3762 [inline] do_wp_page+0x268d/0x5800 mm/memory.c:3981 handle_pte_fault mm/memory.c:6068 [inline] __handle_mm_fault+0x1033/0x5440 mm/memory.c:6195 handle_mm_fault+0x40a/0x8e0 mm/memory.c:6364 do_user_addr_fault+0x764/0x1390 arch/x86/mm/fault.c:1387 handle_page_fault arch/x86/mm/fault.c:1476 [inline] exc_page_fault+0x76/0xf0 arch/x86/mm/fault.c:1532 asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:623 RIP: 0010:copy_user_generic arch/x86/include/asm/uaccess_64.h:126 [inline] RIP: 0010:raw_copy_to_user arch/x86/include/asm/uaccess_64.h:147 [inline] RIP: 0010:_inline_copy_to_user include/linux/uaccess.h:197 [inline] RIP: 0010:_copy_to_user+0x85/0xb0 lib/usercopy.c:26 Code: e8 00 bc f7 fc 4d 39 fc 72 3d 4d 39 ec 77 38 e8 91 b9 f7 fc 4c 89 f7 89 de e8 47 25 5b fd 0f 01 cb 4c 89 ff 48 89 d9 4c 89 f6 <f3> a4 0f 1f 00 48 89 cb 0f 01 ca 48 89 d8 5b 41 5c 41 5d 41 5e 41 RSP: 0018:ffffc9000403f950 EFLAGS: 00050256 RAX: ffffffff84c7f101 RBX: 0000000000000038 RCX: 0000000000000038 RDX: 0000000000000000 RSI: ffffc9000403f9e0 RDI: 0000200000000060 RBP: ffffc9000403fa90 R08: ffffc9000403fa17 R09: 1ffff92000807f42 R10: dffffc0000000000 R11: fffff52000807f43 R12: 0000200000000098 R13: 00007ffffffff000 R14: ffffc9000403f9e0 R15: 0000200000000060 copy_to_user include/linux/uaccess.h:225 [inline] fiemap_fill_next_extent+0x1c0/0x390 fs/ioctl.c:145 ocfs2_fiemap+0x888/0xc90 fs/ocfs2/extent_map.c:806 ioctl_fiemap fs/ioctl.c:220 [inline] do_vfs_ioctl+0x1173/0x1430 fs/ioctl.c:532 __do_sys_ioctl fs/ioctl.c:596 [inline] __se_sys_ioctl+0x82/0x170 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f5f13850fd9 RSP: 002b:00007ffe3b3518b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000200000000000 RCX: 00007f5f13850fd9 RDX: 0000200000000040 RSI: 00000000c020660b RDI: 0000000000000004 RBP: 6165627472616568 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe3b3518f0 R13: 00007ffe3b351b18 R14: 431bde82d7b634db R15: 00007f5f1389a03b ocfs2_fiemap() takes a read lock of the ip_alloc_sem semaphore (since v2.6.22-527-g7307de80510a) and calls fiemap_fill_next_extent() to read the extent list of this running mmap executable. The user supplied buffer to hold the fiemap information page faults calling ocfs2_page_mkwrite() which will take a write lock (since v2.6.27-38-g00dc417fa3e7) of the same semaphore. This recursive semaphore will hold filesystem locks and causes a hang of the fileystem. The ip_alloc_sem protects the inode extent list and size. Release the read semphore before calling fiemap_fill_next_extent() in ocfs2_fiemap() and ocfs2_fiemap_inline(). This does an unnecessary semaphore lock/unlock on the last extent but simplifies the error path.

In the Linux kernel, the following vulnerability has been resolved: mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memory When I did memory failure tests, below panic occurs: page dumped because: VM_BUG_ON_PAGE(PagePoisoned(page)) kernel BUG at include/linux/page-flags.h:616! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 720 Comm: bash Not tainted 6.10.0-rc1-00195-g148743902568 #40 RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Call Trace: <TASK> unpoison_memory+0x2f3/0x590 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110 debugfs_attr_write+0x42/0x60 full_proxy_write+0x5b/0x80 vfs_write+0xd5/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08f0314887 RSP: 002b:00007ffece710078 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f08f0314887 RDX: 0000000000000009 RSI: 0000564787a30410 RDI: 0000000000000001 RBP: 0000564787a30410 R08: 000000000000fefe R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009 R13: 00007f08f041b780 R14: 00007f08f0417600 R15: 00007f08f0416a00 </TASK> Modules linked in: hwpoison_inject ---[ end trace 0000000000000000 ]--- RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x31c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The root cause is that unpoison_memory() tries to check the PG_HWPoison flags of an uninitialized page. So VM_BUG_ON_PAGE(PagePoisoned(page)) is triggered. This can be reproduced by below steps: 1.Offline memory block: echo offline > /sys/devices/system/memory/memory12/state 2.Get offlined memory pfn: page-types -b n -rlN 3.Write pfn to unpoison-pfn echo <pfn> > /sys/kernel/debug/hwpoison/unpoison-pfn This scenario can be identified by pfn_to_online_page() returning NULL. And ZONE_DEVICE pages are never expected, so we can simply fail if pfn_to_online_page() == NULL to fix the bug.

In the Linux kernel, the following vulnerability has been resolved: kernfs: Fix UAF in polling when open file is released A use-after-free (UAF) vulnerability was identified in the PSI (Pressure Stall Information) monitoring mechanism: BUG: KASAN: slab-use-after-free in psi_trigger_poll+0x3c/0x140 Read of size 8 at addr ffff3de3d50bd308 by task systemd/1 psi_trigger_poll+0x3c/0x140 cgroup_pressure_poll+0x70/0xa0 cgroup_file_poll+0x8c/0x100 kernfs_fop_poll+0x11c/0x1c0 ep_item_poll.isra.0+0x188/0x2c0 Allocated by task 1: cgroup_file_open+0x88/0x388 kernfs_fop_open+0x73c/0xaf0 do_dentry_open+0x5fc/0x1200 vfs_open+0xa0/0x3f0 do_open+0x7e8/0xd08 path_openat+0x2fc/0x6b0 do_filp_open+0x174/0x368 Freed by task 8462: cgroup_file_release+0x130/0x1f8 kernfs_drain_open_files+0x17c/0x440 kernfs_drain+0x2dc/0x360 kernfs_show+0x1b8/0x288 cgroup_file_show+0x150/0x268 cgroup_pressure_write+0x1dc/0x340 cgroup_file_write+0x274/0x548 Reproduction Steps: 1. Open test/cpu.pressure and establish epoll monitoring 2. Disable monitoring: echo 0 > test/cgroup.pressure 3. Re-enable monitoring: echo 1 > test/cgroup.pressure The race condition occurs because: 1. When cgroup.pressure is disabled (echo 0 > cgroup.pressure), it: - Releases PSI triggers via cgroup_file_release() - Frees of->priv through kernfs_drain_open_files() 2. While epoll still holds reference to the file and continues polling 3. Re-enabling (echo 1 > cgroup.pressure) accesses freed of->priv epolling disable/enable cgroup.pressure fd=open(cpu.pressure) while(1) ... epoll_wait kernfs_fop_poll kernfs_get_active = true echo 0 > cgroup.pressure ... cgroup_file_show kernfs_show // inactive kn kernfs_drain_open_files cft->release(of); kfree(ctx); ... kernfs_get_active = false echo 1 > cgroup.pressure kernfs_show kernfs_activate_one(kn); kernfs_fop_poll kernfs_get_active = true cgroup_file_poll psi_trigger_poll // UAF ... end: close(fd) To address this issue, introduce kernfs_get_active_of() for kernfs open files to obtain active references. This function will fail if the open file has been released. Replace kernfs_get_active() with kernfs_get_active_of() to prevent further operations on released file descriptors.

In the Linux kernel, the following vulnerability has been resolved: libceph: fix invalid accesses to ceph_connection_v1_info There is a place where generic code in messenger.c is reading and another place where it is writing to con->v1 union member without checking that the union member is active (i.e. msgr1 is in use). On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter, so such a read is almost guaranteed to return a bogus value instead of 0 when msgr2 is in use. This ends up being fairly benign because the side effect is just the invalidation of the authorizer and successive fetching of new tickets. con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that it's being written to can cause more serious consequences, but luckily it's not something that happens often.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs: fix use-after-free in state_show() state_show() reads kdamond->damon_ctx without holding damon_sysfs_lock. This allows a use-after-free race: CPU 0 CPU 1 ----- ----- state_show() damon_sysfs_turn_damon_on() ctx = kdamond->damon_ctx; mutex_lock(&damon_sysfs_lock); damon_destroy_ctx(kdamond->damon_ctx); kdamond->damon_ctx = NULL; mutex_unlock(&damon_sysfs_lock); damon_is_running(ctx); /* ctx is freed */ mutex_lock(&ctx->kdamond_lock); /* UAF */ (The race can also occur with damon_sysfs_kdamonds_rm_dirs() and damon_sysfs_kdamond_release(), which free or replace the context under damon_sysfs_lock.) Fix by taking damon_sysfs_lock before dereferencing the context, mirroring the locking used in pid_show(). The bug has existed since state_show() first accessed kdamond->damon_ctx.

In the Linux kernel, the following vulnerability has been resolved: net: fec: Fix possible NPD in fec_enet_phy_reset_after_clk_enable() The function of_phy_find_device may return NULL, so we need to take care before dereferencing phy_dev.

In the Linux kernel, the following vulnerability has been resolved: can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB can_put_echo_skb() takes ownership of the SKB and it may be freed during or after the call. However, xilinx_can xcan_write_frame() keeps using SKB after the call. Fix that by only calling can_put_echo_skb() after the code is done touching the SKB. The tx_lock is held for the entire xcan_write_frame() execution and also on the can_get_echo_skb() side so the order of operations does not matter. An earlier fix commit 3d3c817c3a40 ("can: xilinx_can: Fix usage of skb memory") did not move the can_put_echo_skb() call far enough. [mkl: add "commit" in front of sha1 in patch description] [mkl: fix indention]

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix double free in idxd_setup_wqs() The clean up in idxd_setup_wqs() has had a couple bugs because the error handling is a bit subtle. It's simpler to just re-write it in a cleaner way. The issues here are: 1) If "idxd->max_wqs" is <= 0 then we call put_device(conf_dev) when "conf_dev" hasn't been initialized. 2) If kzalloc_node() fails then again "conf_dev" is invalid. It's either uninitialized or it points to the "conf_dev" from the previous iteration so it leads to a double free. It's better to free partial loop iterations within the loop and then the unwinding at the end can handle whole loop iterations. I also renamed the labels to describe what the goto does and not where the goto was located.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: edma: Fix memory allocation size for queue_priority_map Fix a critical memory allocation bug in edma_setup_from_hw() where queue_priority_map was allocated with insufficient memory. The code declared queue_priority_map as s8 (*)[2] (pointer to array of 2 s8), but allocated memory using sizeof(s8) instead of the correct size. This caused out-of-bounds memory writes when accessing: queue_priority_map[i][0] = i; queue_priority_map[i][1] = i; The bug manifested as kernel crashes with "Oops - undefined instruction" on ARM platforms (BeagleBoard-X15) during EDMA driver probe, as the memory corruption triggered kernel hardening features on Clang. Change the allocation to use sizeof(*queue_priority_map) which automatically gets the correct size for the 2D array structure.

In the Linux kernel, the following vulnerability has been resolved: fs: writeback: fix use-after-free in __mark_inode_dirty() An use-after-free issue occurred when __mark_inode_dirty() get the bdi_writeback that was in the progress of switching. CPU: 1 PID: 562 Comm: systemd-random- Not tainted 6.6.56-gb4403bd46a8e #1 ...... pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mark_inode_dirty+0x124/0x418 lr : __mark_inode_dirty+0x118/0x418 sp : ffffffc08c9dbbc0 ........ Call trace: __mark_inode_dirty+0x124/0x418 generic_update_time+0x4c/0x60 file_modified+0xcc/0xd0 ext4_buffered_write_iter+0x58/0x124 ext4_file_write_iter+0x54/0x704 vfs_write+0x1c0/0x308 ksys_write+0x74/0x10c __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x40/0xe4 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x194/0x198 Root cause is: systemd-random-seed kworker ---------------------------------------------------------------------- ___mark_inode_dirty inode_switch_wbs_work_fn spin_lock(&inode->i_lock); inode_attach_wb locked_inode_to_wb_and_lock_list get inode->i_wb spin_unlock(&inode->i_lock); spin_lock(&wb->list_lock) spin_lock(&inode->i_lock) inode_io_list_move_locked spin_unlock(&wb->list_lock) spin_unlock(&inode->i_lock) spin_lock(&old_wb->list_lock) inode_do_switch_wbs spin_lock(&inode->i_lock) inode->i_wb = new_wb spin_unlock(&inode->i_lock) spin_unlock(&old_wb->list_lock) wb_put_many(old_wb, nr_switched) cgwb_release old wb released wb_wakeup_delayed() accesses wb, then trigger the use-after-free issue Fix this race condition by holding inode spinlock until wb_wakeup_delayed() finished.

In the Linux kernel, the following vulnerability has been resolved: tee: fix NULL pointer dereference in tee_shm_put tee_shm_put have NULL pointer dereference: __optee_disable_shm_cache --> shm = reg_pair_to_ptr(...);//shm maybe return NULL tee_shm_free(shm); --> tee_shm_put(shm);//crash Add check in tee_shm_put to fix it. panic log: Unable to handle kernel paging request at virtual address 0000000000100cca Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000002049d07000 [0000000000100cca] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP CPU: 2 PID: 14442 Comm: systemd-sleep Tainted: P OE ------- ---- 6.6.0-39-generic #38 Source Version: 938b255f6cb8817c95b0dd5c8c2944acfce94b07 Hardware name: greatwall GW-001Y1A-FTH, BIOS Great Wall BIOS V3.0 10/26/2022 pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : tee_shm_put+0x24/0x188 lr : tee_shm_free+0x14/0x28 sp : ffff001f98f9faf0 x29: ffff001f98f9faf0 x28: ffff0020df543cc0 x27: 0000000000000000 x26: ffff001f811344a0 x25: ffff8000818dac00 x24: ffff800082d8d048 x23: ffff001f850fcd18 x22: 0000000000000001 x21: ffff001f98f9fb88 x20: ffff001f83e76218 x19: ffff001f83e761e0 x18: 000000000000ffff x17: 303a30303a303030 x16: 0000000000000000 x15: 0000000000000003 x14: 0000000000000001 x13: 0000000000000000 x12: 0101010101010101 x11: 0000000000000001 x10: 0000000000000001 x9 : ffff800080e08d0c x8 : ffff001f98f9fb88 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff001f83e761e0 x1 : 00000000ffff001f x0 : 0000000000100cca Call trace: tee_shm_put+0x24/0x188 tee_shm_free+0x14/0x28 __optee_disable_shm_cache+0xa8/0x108 optee_shutdown+0x28/0x38 platform_shutdown+0x28/0x40 device_shutdown+0x144/0x2b0 kernel_power_off+0x3c/0x80 hibernate+0x35c/0x388 state_store+0x64/0x80 kobj_attr_store+0x14/0x28 sysfs_kf_write+0x48/0x60 kernfs_fop_write_iter+0x128/0x1c0 vfs_write+0x270/0x370 ksys_write+0x6c/0x100 __arm64_sys_write+0x20/0x30 invoke_syscall+0x4c/0x120 el0_svc_common.constprop.0+0x44/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x24/0x88 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x14c/0x15

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix use-after-free in cmp_bss() Following bss_free() quirk introduced in commit 776b3580178f ("cfg80211: track hidden SSID networks properly"), adjust cfg80211_update_known_bss() to free the last beacon frame elements only if they're not shared via the corresponding 'hidden_beacon_bss' pointer.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen() syzbot reported the splat below without a repro. In the splat, a single thread calling bt_accept_dequeue() freed sk and touched it after that. The root cause would be the racy l2cap_sock_cleanup_listen() call added by the cited commit. bt_accept_dequeue() is called under lock_sock() except for l2cap_sock_release(). Two threads could see the same socket during the list iteration in bt_accept_dequeue(): CPU1 CPU2 (close()) ---- ---- sock_hold(sk) sock_hold(sk); lock_sock(sk) <-- block close() sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- refcnt by bt_accept_enqueue() release_sock(sk) lock_sock(sk) sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- last refcnt bt_accept_unlink(sk) <-- UAF Depending on the timing, the other thread could show up in the "Freed by task" part. Let's call l2cap_sock_cleanup_listen() under lock_sock() in l2cap_sock_release(). [0]: BUG: KASAN: slab-use-after-free in debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] BUG: KASAN: slab-use-after-free in do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 Read of size 4 at addr ffff88803b7eb1c4 by task syz.5.3276/16995 CPU: 3 UID: 0 PID: 16995 Comm: syz.5.3276 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:356 [inline] release_sock+0x21/0x220 net/core/sock.c:3746 bt_accept_dequeue+0x505/0x600 net/bluetooth/af_bluetooth.c:312 l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451 l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x3ff/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2accf8ebe9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdb6cb1378 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 00000000000426fb RCX: 00007f2accf8ebe9 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007f2acd1b7da0 R08: 0000000000000001 R09: 00000012b6cb166f R10: 0000001b30e20000 R11: 0000000000000246 R12: 00007f2acd1b609c R13: 00007f2acd1b6090 R14: ffffffffffffffff R15: 00007ffdb6cb1490 </TASK> Allocated by task 5326: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4365 [inline] __kmalloc_nopro ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix one NULL pointer dereference in smc_ib_is_sg_need_sync() BUG: kernel NULL pointer dereference, address: 00000000000002ec PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 28 UID: 0 PID: 343 Comm: kworker/28:1 Kdump: loaded Tainted: G OE 6.17.0-rc2+ #9 NONE Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_ib_is_sg_need_sync+0x9e/0xd0 [smc] ... Call Trace: <TASK> smcr_buf_map_link+0x211/0x2a0 [smc] __smc_buf_create+0x522/0x970 [smc] smc_buf_create+0x3a/0x110 [smc] smc_find_rdma_v2_device_serv+0x18f/0x240 [smc] ? smc_vlan_by_tcpsk+0x7e/0xe0 [smc] smc_listen_find_device+0x1dd/0x2b0 [smc] smc_listen_work+0x30f/0x580 [smc] process_one_work+0x18c/0x340 worker_thread+0x242/0x360 kthread+0xe7/0x220 ret_from_fork+0x13a/0x160 ret_from_fork_asm+0x1a/0x30 </TASK> If the software RoCE device is used, ibdev->dma_device is a null pointer. As a result, the problem occurs. Null pointer detection is added to prevent problems.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix potential invalid access when MAC list is empty list_first_entry() never returns NULL - if the list is empty, it still returns a pointer to an invalid object, leading to potential invalid memory access when dereferenced. Fix this by using list_first_entry_or_null instead of list_first_entry.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result() If the ssid->datalen is more than IEEE80211_MAX_SSID_LEN (32) it would lead to memory corruption so add some bounds checking.

In the Linux kernel, the following vulnerability has been resolved: ax25: properly unshare skbs in ax25_kiss_rcv() Bernard Pidoux reported a regression apparently caused by commit c353e8983e0d ("net: introduce per netns packet chains"). skb->dev becomes NULL and we crash in __netif_receive_skb_core(). Before above commit, different kind of bugs or corruptions could happen without a major crash. But the root cause is that ax25_kiss_rcv() can queue/mangle input skb without checking if this skb is shared or not. Many thanks to Bernard Pidoux for his help, diagnosis and tests. We had a similar issue years ago fixed with commit 7aaed57c5c28 ("phonet: properly unshare skbs in phonet_rcv()").

In the Linux kernel, the following vulnerability has been resolved: ppp: fix memory leak in pad_compress_skb If alloc_skb() fails in pad_compress_skb(), it returns NULL without releasing the old skb. The caller does: skb = pad_compress_skb(ppp, skb); if (!skb) goto drop; drop: kfree_skb(skb); When pad_compress_skb() returns NULL, the reference to the old skb is lost and kfree_skb(skb) ends up doing nothing, leading to a memory leak. Align pad_compress_skb() semantics with realloc(): only free the old skb if allocation and compression succeed. At the call site, use the new_skb variable so the original skb is not lost when pad_compress_skb() fails.

In the Linux kernel, the following vulnerability has been resolved: pcmcia: Fix a NULL pointer dereference in __iodyn_find_io_region() In __iodyn_find_io_region(), pcmcia_make_resource() is assigned to res and used in pci_bus_alloc_resource(). There is a dereference of res in pci_bus_alloc_resource(), which could lead to a NULL pointer dereference on failure of pcmcia_make_resource(). Fix this bug by adding a check of res.

In the Linux kernel, the following vulnerability has been resolved: x86/mm/64: define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() Define ARCH_PAGE_TABLE_SYNC_MASK and arch_sync_kernel_mappings() to ensure page tables are properly synchronized when calling p*d_populate_kernel(). For 5-level paging, synchronization is performed via pgd_populate_kernel(). In 4-level paging, pgd_populate() is a no-op, so synchronization is instead performed at the P4D level via p4d_populate_kernel(). This fixes intermittent boot failures on systems using 4-level paging and a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It also fixes a crash in vmemmap_set_pmd() caused by accessing vmemmap before sync_global_pgds() [1]: BUG: unable to handle page fault for address: ffffeb3ff1200000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP NOPTI Tainted: [W]=WARN RIP: 0010:vmemmap_set_pmd+0xff/0x230 <TASK> vmemmap_populate_hugepages+0x176/0x180 vmemmap_populate+0x34/0x80 __populate_section_memmap+0x41/0x90 sparse_add_section+0x121/0x3e0 __add_pages+0xba/0x150 add_pages+0x1d/0x70 memremap_pages+0x3dc/0x810 devm_memremap_pages+0x1c/0x60 xe_devm_add+0x8b/0x100 [xe] xe_tile_init_noalloc+0x6a/0x70 [xe] xe_device_probe+0x48c/0x740 [xe] [... snip ...]

In the Linux kernel, the following vulnerability has been resolved: mm: move page table sync declarations to linux/pgtable.h During our internal testing, we started observing intermittent boot failures when the machine uses 4-level paging and has a large amount of persistent memory: BUG: unable to handle page fault for address: ffffe70000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI RIP: 0010:__init_single_page+0x9/0x6d Call Trace: <TASK> __init_zone_device_page+0x17/0x5d memmap_init_zone_device+0x154/0x1bb pagemap_range+0x2e0/0x40f memremap_pages+0x10b/0x2f0 devm_memremap_pages+0x1e/0x60 dev_dax_probe+0xce/0x2ec [device_dax] dax_bus_probe+0x6d/0xc9 [... snip ...] </TASK> It turns out that the kernel panics while initializing vmemmap (struct page array) when the vmemmap region spans two PGD entries, because the new PGD entry is only installed in init_mm.pgd, but not in the page tables of other tasks. And looking at __populate_section_memmap(): if (vmemmap_can_optimize(altmap, pgmap)) // does not sync top level page tables r = vmemmap_populate_compound_pages(pfn, start, end, nid, pgmap); else // sync top level page tables in x86 r = vmemmap_populate(start, end, nid, altmap); In the normal path, vmemmap_populate() in arch/x86/mm/init_64.c synchronizes the top level page table (See commit 9b861528a801 ("x86-64, mem: Update all PGDs for direct mapping and vmemmap mapping changes")) so that all tasks in the system can see the new vmemmap area. However, when vmemmap_can_optimize() returns true, the optimized path skips synchronization of top-level page tables. This is because vmemmap_populate_compound_pages() is implemented in core MM code, which does not handle synchronization of the top-level page tables. Instead, the core MM has historically relied on each architecture to perform this synchronization manually. We're not the first party to encounter a crash caused by not-sync'd top level page tables: earlier this year, Gwan-gyeong Mun attempted to address the issue [1] [2] after hitting a kernel panic when x86 code accessed the vmemmap area before the corresponding top-level entries were synced. At that time, the issue was believed to be triggered only when struct page was enlarged for debugging purposes, and the patch did not get further updates. It turns out that current approach of relying on each arch to handle the page table sync manually is fragile because 1) it's easy to forget to sync the top level page table, and 2) it's also easy to overlook that the kernel should not access the vmemmap and direct mapping areas before the sync. # The solution: Make page table sync more code robust and harder to miss To address this, Dave Hansen suggested [3] [4] introducing {pgd,p4d}_populate_kernel() for updating kernel portion of the page tables and allow each architecture to explicitly perform synchronization when installing top-level entries. With this approach, we no longer need to worry about missing the sync step, reducing the risk of future regressions. The new interface reuses existing ARCH_PAGE_TABLE_SYNC_MASK, PGTBL_P*D_MODIFIED and arch_sync_kernel_mappings() facility used by vmalloc and ioremap to synchronize page tables. pgd_populate_kernel() looks like this: static inline void pgd_populate_kernel(unsigned long addr, pgd_t *pgd, p4d_t *p4d) { pgd_populate(&init_mm, pgd, p4d); if (ARCH_PAGE_TABLE_SYNC_MASK & PGTBL_PGD_MODIFIED) arch_sync_kernel_mappings(addr, addr); } It is worth noting that vmalloc() and apply_to_range() carefully synchronizes page tables by calling p*d_alloc_track() and arch_sync_kernel_mappings(), and thus they are not affected by ---truncated---