The e1000 driver for Linux kernel 2.4.26 and earlier does not properly initialize memory before using it, which allows local users to read portions of kernel memory. NOTE: this issue was originally incorrectly reported as a "buffer overflow" by some sources.

arch/x86/kernel/paravirt.c in the Linux kernel before 4.18.1 mishandles certain indirect calls, which makes it easier for attackers to conduct Spectre-v2 attacks against paravirtual guests.

GDM before 2.4.1.6, when using the "examine session errors" feature, allows local users to read arbitrary files via a symlink attack on the ~/.xsession-errors file.

If a user saved passwords before Firefox 58 and then later set a master password, an unencrypted copy of these passwords is still accessible. This is because the older stored password file was not deleted when the data was copied to a new format starting in Firefox 58. The new master password is added only on the new file. This could allow the exposure of stored password data outside of user expectations. This vulnerability affects Firefox < 62, Firefox ESR < 60.2.1, and Thunderbird < 60.2.1.

Kernel Samepage Merging (KSM) in the Linux kernel 2.6.32 through 4.x does not prevent use of a write-timing side channel, which allows guest OS users to defeat the ASLR protection mechanism on other guest OS instances via a Cross-VM ASL INtrospection (CAIN) attack. NOTE: the vendor states "Basically if you care about this attack vector, disable deduplication." Share-until-written approaches for memory conservation among mutually untrusting tenants are inherently detectable for information disclosure, and can be classified as potentially misunderstood behaviors rather than vulnerabilities

The HYPERVISOR_xen_version hypercall in Xen 3.2.x through 4.5.x does not properly initialize data structures, which allows local guest users to obtain sensitive information via unspecified vectors.

The (1) ssh2_load_userkey and (2) ssh2_save_userkey functions in PuTTY 0.51 through 0.63 do not properly wipe SSH-2 private keys from memory, which allows local users to obtain sensitive information by reading the memory.

A flaw was found in the permissions of a log file created by kexec-tools. This flaw allows a local unprivileged user to read this file and leak kernel internal information from a previous panic. The highest threat from this vulnerability is to confidentiality. This flaw affects kexec-tools shipped by Fedora versions prior to 2.0.21-8 and RHEL versions prior to 2.0.20-47.

rsync, when running in daemon mode, does not properly call setgroups before dropping privileges, which could provide supplemental group privileges to local users, who could then read certain files that would otherwise be disallowed.

An issue was discovered in the Linux kernel through 5.11.x. kernel/bpf/verifier.c performs undesirable out-of-bounds speculation on pointer arithmetic, leading to side-channel attacks that defeat Spectre mitigations and obtain sensitive information from kernel memory. Specifically, for sequences of pointer arithmetic operations, the pointer modification performed by the first operation is not correctly accounted for when restricting subsequent operations.

selinux-policy as packaged in Red Hat OpenShift 2 allows attackers to obtain process listing information via a privilege escalation attack.

The parse_rock_ridge_inode_internal function in fs/isofs/rock.c in the Linux kernel before 3.18.2 does not validate a length value in the Extensions Reference (ER) System Use Field, which allows local users to obtain sensitive information from kernel memory via a crafted iso9660 image.

The processutils.execute function in OpenStack oslo-incubator, Cinder, Nova, and Trove before 2013.2.4 and 2014.1 before 2014.1.3 allows local users to obtain passwords from commands that cause a ProcessExecutionError by reading the log.

The kernel in Red Hat Enterprise Linux 7 and MRG-2 does not clear garbage data for SG_IO buffer, which may leaking sensitive information to userspace.

Libgcrypt before 1.5.4, as used in GnuPG and other products, does not properly perform ciphertext normalization and ciphertext randomization, which makes it easier for physically proximate attackers to conduct key-extraction attacks by leveraging the ability to collect voltage data from exposed metal, a different vector than CVE-2013-4576.

Ansible before 1.5.5 constructs filenames containing user and password fields on the basis of deb lines in sources.list, which might allow local users to obtain sensitive credential information in opportunistic circumstances by leveraging existence of a file that uses the "deb http://user:pass@server:port/" format.

An issue was discovered in Xen 4.9 through 4.14.x. On Arm, a guest is allowed to control whether memory accesses are bypassing the cache. This means that Xen needs to ensure that all writes (such as the ones during scrubbing) have reached the memory before handing over the page to a guest. Unfortunately, the operation to clean the cache is happening before checking if the page was scrubbed. Therefore there is no guarantee when all the writes will reach the memory.

The vault subsystem in Ansible before 1.5.5 does not set the umask before creation or modification of a vault file, which allows local users to obtain sensitive key information by reading a file.

ppc64-diag 2.6.1 uses 0775 permissions for /tmp/diagSEsnap and does not properly restrict permissions for /tmp/diagSEsnap/snapH.tar.gz, which allows local users to obtain sensitive information by reading files in this archive, as demonstrated by /var/log/messages and /etc/yaboot.conf.

The rhevm-log-collector package in Red Hat Enterprise Virtualization 3.4 uses the PostgreSQL database password on the command line when calling sosreport, which allows local users to obtain sensitive information by listing the processes.

The default configuration for the Command Line Interface in Red Hat Enterprise Application Platform before 6.4.0 and WildFly (formerly JBoss Application Server) uses weak permissions for .jboss-cli-history, which allows local users to obtain sensitive information via unspecified vectors.

The VGA emulator in QEMU allows local guest users to read host memory by setting the display to a high resolution.

Red Hat OpenShift Enterprise before 2.2 allows local users to obtain IP address and port number information for remote systems by reading /proc/net/tcp.

CFME (CloudForms Management Engine) 5: RHN account information is logged to top_output.log during registration

The raw_cmd_copyout function in drivers/block/floppy.c in the Linux kernel through 3.14.3 does not properly restrict access to certain pointers during processing of an FDRAWCMD ioctl call, which allows local users to obtain sensitive information from kernel heap memory by leveraging write access to a /dev/fd device.

An issue was discovered in the Linux kernel before 4.18.11. The ipddp_ioctl function in drivers/net/appletalk/ipddp.c allows local users to obtain sensitive kernel address information by leveraging CAP_NET_ADMIN to read the ipddp_route dev and next fields via an SIOCFINDIPDDPRT ioctl call.

Linux kernel vhost since version 4.8 does not properly initialize memory in messages passed between virtual guests and the host operating system in the vhost/vhost.c:vhost_new_msg() function. This can allow local privileged users to read some kernel memory contents when reading from the /dev/vhost-net device file.

The Red Hat Enterprise Virtualization Manager reports (rhevm-reports) package before 3.3.3-1 uses world-readable permissions on the datasource configuration file (js-jboss7-ds.xml), which allows local users to obtain sensitive information by reading the file.

ovirt-engine-reports, as used in the Red Hat Enterprise Virtualization reports package (rhevm-reports) before 3.3.3, uses world-readable permissions on configuration files, which allows local users to obtain sensitive information by reading the files.

virt-who uses world-readable permissions for /etc/sysconfig/virt-who, which allows local users to obtain password for hypervisors by reading the file.

linenoise, as used in Redis before 3.2.3, uses world-readable permissions for .rediscli_history, which allows local users to obtain sensitive information by reading the file.

The LiveConnect implementation in plugin/icedteanp/IcedTeaNPPlugin.cc in IcedTea-Web before 1.4.2 allows local users to read the messages between a Java applet and a web browser by pre-creating a temporary socket file with a predictable name in /tmp.

rubygem-hammer_cli_foreman: File /etc/hammer/cli.modules.d/foreman.yml world readable

JBoss Fuse did not enable encrypted passwords by default in its usage of Apache Zookeeper. This permitted sensitive information disclosure via logging to local users. Note: this description has been updated; previous text mistakenly identified the source of the flaw as Zookeeper. Previous text: Apache Zookeeper logs cleartext admin passwords, which allows local users to obtain sensitive information by reading the log.

openshift-origin-broker-util, as used in Red Hat OpenShift Enterprise 1.2.7 and 2.0.5, uses world-readable permissions for the mcollective client.cfg configuration file, which allows local users to obtain credentials and other sensitive information by reading the file.

An issue was discovered in the Linux kernel through 4.19. An information leak in cdrom_ioctl_select_disc in drivers/cdrom/cdrom.c could be used by local attackers to read kernel memory because a cast from unsigned long to int interferes with bounds checking. This is similar to CVE-2018-10940 and CVE-2018-16658.

The Ruby net-ldap gem before 0.11 uses a weak salt when generating SSHA passwords.

The setup script in ovirt-engine-reports, as used in the Red Hat Enterprise Virtualization reports (rhevm-reports) package before 3.3.3, stores the reports database password in cleartext, which allows local users to obtain sensitive information by reading an unspecified file.

The setup script in ovirt-engine-dwh, as used in the Red Hat Enterprise Virtualization Manager data warehouse (rhevm-dwh) package before 3.3.3, stores the history database password in cleartext, which allows local users to obtain sensitive information by reading an unspecified file.

RHUI (Red Hat Update Infrastructure) 2.1.3 has world readable PKI entitlement certificates

Automatic Bug Reporting Tool (ABRT) before 2.1.6 allows local users to obtain sensitive information about arbitrary files via vectors related to sha1sums.

A flaw was found in Wildfly 9.x. A path traversal vulnerability through the org.wildfly.extension.undertow.deployment.ServletResourceManager.getResource method could lead to information disclosure of arbitrary local files.

A security flaw was found in the Linux kernel in a way that the cleancache subsystem clears an inode after the final file truncation (removal). The new file created with the same inode may contain leftover pages from cleancache and the old file data instead of the new one.

Red Hat JBoss Operations Network 3.1.2 uses world-readable permissions for the (1) server and (2) agent configuration files, which allows local users to obtain authentication credentials and other unspecified sensitive information by reading these files.

CloudForms stores user passwords in recoverable format

The crypto_report_one function in crypto/crypto_user.c in the report API in the crypto user configuration API in the Linux kernel through 3.8.2 does not initialize certain structure members, which allows local users to obtain sensitive information from kernel heap memory by leveraging the CAP_NET_ADMIN capability.

The report API in the crypto user configuration API in the Linux kernel through 3.8.2 uses an incorrect C library function for copying strings, which allows local users to obtain sensitive information from kernel stack memory by leveraging the CAP_NET_ADMIN capability.

The mmc_ioctl_cdrom_read_data function in drivers/cdrom/cdrom.c in the Linux kernel through 3.10 allows local users to obtain sensitive information from kernel memory via a read operation on a malfunctioning CD-ROM drive.

ldap-git-backup before 1.0.4 exposes password hashes due to incorrect directory permissions.

Vulnerability in FAM 2.6.8, 2.6.6, and other versions allows unprivileged users to obtain the names of files whose access is restricted to the root group.