A vulnerability in the Cisco REST API virtual service container for Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass authentication on the managed Cisco IOS XE device. The vulnerability is due to an improper check performed by the area of code that manages the REST API authentication service. An attacker could exploit this vulnerability by submitting malicious HTTP requests to the targeted device. A successful exploit could allow the attacker to obtain the token-id of an authenticated user. This token-id could be used to bypass authentication and execute privileged actions through the interface of the REST API virtual service container on the affected Cisco IOS XE device. The REST API interface is not enabled by default and must be installed and activated separately on IOS XE devices. See the Details section for more information.
A vulnerability in the Dialer interface feature for ISDN connections in Cisco IOS XE Software for Cisco 4000 Series Integrated Services Routers (ISRs) could allow an unauthenticated, adjacent attacker to pass IPv4 traffic through an ISDN channel prior to successful PPP authentication. The vulnerability is due to insufficient validation of the state of the PPP IP Control Protocol (IPCP). An attacker could exploit this vulnerability by making an ISDN call to an affected device and sending traffic through the ISDN channel prior to successful PPP authentication. Alternatively, an unauthenticated, remote attacker could exploit this vulnerability by sending traffic through an affected device that is configured to exit via an ISDN connection for which both the Dialer interface and the Basic Rate Interface (BRI) have been configured, but the Challenge Handshake Authentication Protocol (CHAP) password for PPP does not match the remote end. A successful exploit could allow the attacker to pass IPv4 traffic through an unauthenticated ISDN connection for a few seconds, from initial ISDN call setup until PPP authentication fails.
Multiple vulnerabilities in Cisco BroadWorks CommPilot Application Software could allow an authenticated, remote attacker to delete arbitrary user accounts or gain elevated privileges on an affected system.
A vulnerability in the Security Assertion Markup Language (SAML) APIs of Cisco Catalyst SD-WAN Manager Software could allow an unauthenticated, remote attacker to gain unauthorized access to the application as an arbitrary user. This vulnerability is due to improper authentication checks for SAML APIs. An attacker could exploit this vulnerability by sending requests directly to the SAML API. A successful exploit could allow the attacker to generate an authorization token sufficient to gain access to the application.
Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 7.1(1) through 7.1(2)82, 7.2 before 7.2(4)27, 8.0 before 8.0(4)25, and 8.1 before 8.1(2)15, when AAA override-account-disable is entered in a general-attributes field, allow remote attackers to bypass authentication and establish a VPN session to an ASA device via unspecified vectors.
Unspecified vulnerability in the Web Server in Cisco Unified MeetingPlace Web Conferencing 6.0 before 6.0(517.0) (aka 6.0 MR4) and 7.0 before 7.0(2) (aka 7.0 MR1) allows remote attackers to bypass authentication and obtain administrative access via a crafted URL.
A vulnerability in Cisco Duo Two-Factor Authentication for macOS could allow an authenticated, physical attacker to bypass secondary authentication and access an affected macOS device. This vulnerability is due to the incorrect handling of responses from Cisco Duo when the application is configured to fail open. An attacker with primary user credentials could exploit this vulnerability by attempting to authenticate to an affected device. A successful exploit could allow the attacker to access the affected device without valid permission.
A vulnerability in the CLI console login authentication of Cisco Nexus 9300-FX3 Series Fabric Extender (FEX) when used in UCS Fabric Interconnect deployments could allow an unauthenticated attacker with physical access to bypass authentication. This vulnerability is due to the improper implementation of the password validation function. An attacker could exploit this vulnerability by logging in to the console port on an affected device. A successful exploit could allow the attacker to bypass authentication and execute a limited set of commands local to the FEX, which could cause a device reboot and denial of service (DoS) condition.
A vulnerability in the request authentication validation for the REST API of Cisco SD-WAN vManage software could allow an unauthenticated, remote attacker to gain read permissions or limited write permissions to the configuration of an affected Cisco SD-WAN vManage instance. This vulnerability is due to insufficient request validation when using the REST API feature. An attacker could exploit this vulnerability by sending a crafted API request to an affected vManage instance. A successful exploit could allow the attacker to retrieve information from and send information to the configuration of the affected Cisco vManage instance. This vulnerability only affects the REST API and does not affect the web-based management interface or the CLI.
A vulnerability in Cisco Duo Authentication for Windows Logon and RDP could allow an authenticated, physical attacker to bypass secondary authentication and access an affected Windows device. This vulnerability is due to a failure to invalidate locally created trusted sessions after a reboot of the affected device. An attacker with primary user credentials could exploit this vulnerability by attempting to authenticate to an affected device. A successful exploit could allow the attacker to access the affected device without valid permissions.
Cisco Trust Agent (CTA) before 2.1.104.0, when running on MacOS X, allows attackers with physical access to bypass authentication and modify System Preferences, including passwords, by invoking the Apple Menu when the Access Control Server (ACS) produces a user notification message after posture validation.
The Active Directory (AD) integration component in Cisco Identity Service Engine (ISE) before 1.2.0.899 patch 7, when AD group-membership authorization is enabled, allows remote attackers to cause a denial of service (authentication outage) via a crafted Password Authentication Protocol (PAP) authentication request, aka Bug ID CSCun25815.
The System Configuration Protocol (SCP) core messaging interface in Cisco Prime Network Registrar 8.2 before 8.2.3.1 and 8.3 before 8.3.2 allows remote attackers to obtain sensitive information via crafted SCP messages, aka Bug ID CSCuv35694.
The XML API in TelePresence Codec (TC) 7.2.0, 7.2.1, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 7.3.4, and 7.3.5 and Collaboration Endpoint (CE) 8.0.0, 8.0.1, and 8.1.0 in Cisco TelePresence Software mishandles authentication, which allows remote attackers to execute control commands or make configuration changes via an API request, aka Bug ID CSCuz26935.
Unspecified vulnerability in Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 7.0 before 7.0(8)3, 7.1 before 7.1(2)78, 7.2 before 7.2(4)16, 8.0 before 8.0(4)6, and 8.1 before 8.1(1)13, when configured as a VPN using Microsoft Windows NT Domain authentication, allows remote attackers to bypass VPN authentication via unknown vectors.
Cisco FireSIGHT System Software 6.1.0 does not use a constant-time algorithm for verifying credentials, which makes it easier for remote attackers to enumerate valid usernames by measuring timing differences, aka Bug ID CSCuy41615.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the spam quarantine feature of Cisco Secure Email and Web Manager, formerly Cisco Security Management Appliance (SMA), could allow an authenticated, remote attacker to gain unauthorized access and modify the spam quarantine settings of another user. This vulnerability exists because access to the spam quarantine feature is not properly restricted. An attacker could exploit this vulnerability by sending malicious requests to an affected system. A successful exploit could allow the attacker to modify another user's spam quarantine settings, possibly disabling security controls or viewing email messages stored on the spam quarantine interfaces.
A vulnerability in the API subsystem of Cisco Meetings App could allow an unauthenticated, remote attacker to retain and reuse the Traversal Using Relay NAT (TURN) server credentials that are configured in an affected system. The vulnerability is due to insufficient protection mechanisms for the TURN server credentials. An attacker could exploit this vulnerability by intercepting the legitimate traffic that is generated by an affected system. An exploit could allow the attacker to obtain the TURN server credentials, which the attacker could use to place audio/video calls and forward packets through the configured TURN server. The attacker would not be able to take control of the TURN server unless the same credentials were used in multiple systems.
Unspecified vulnerability in Cisco Unity 4.x before 4.2(1)ES161, 5.x before 5.0(1)ES53, and 7.x before 7.0(2)ES8, when using anonymous authentication (aka native Unity authentication), allows remote attackers to bypass authentication and read or modify system configuration parameters by going to a specific link more than once.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability in the shell access request mechanism of Cisco IOS XE Software could allow an authenticated, local attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by requesting access to the root shell of an affected device, after the shell access feature has been enabled. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.
The Real-Time Information Server (RIS) Data Collector service in Cisco Unified Communications Manager (CUCM) 5.x before 5.1(3) and 6.x before 6.1(1) allows remote attackers to bypass authentication, and obtain cluster configuration information and statistics, via a direct TCP connection to the service port, aka Bug ID CSCsj90843.
The Disaster Recovery Framework (DRF) master server in Cisco Unified Communications products, including Unified Communications Manager (CUCM) 5.x and 6.x, Unified Presence 1.x and 6.x, Emergency Responder 2.x, and Mobility Manager 2.x, does not require authentication for requests received from the network, which allows remote attackers to execute arbitrary code via unspecified vectors.
SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte.
Cisco Prime Collaboration Assurance before 11.0 has a hardcoded cmuser account, which allows remote attackers to obtain access by establishing an SSH session and leveraging knowledge of this account's password, aka Bug ID CSCus62707.
A vulnerability in the TCP Intercept functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured Access Control Policies (including Geolocation) and Service Polices on an affected system. The vulnerability exists because TCP Intercept is invoked when the embryonic connection limit is reached, which can cause the underlying detection engine to process the packet incorrectly. An attacker could exploit this vulnerability by sending a crafted stream of traffic that matches a policy on which TCP Intercept is configured. A successful exploit could allow the attacker to match on an incorrect policy, which could allow the traffic to be forwarded when it should be dropped. In addition, the traffic could incorrectly be dropped.
A vulnerability in Cisco DNA Center software could allow an unauthenticated remote attacker access to sensitive information on an affected system. The vulnerability is due to improper handling of authentication tokens by the affected software. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker access to sensitive device information, which includes configuration files.
Cisco Wireless LAN Controller (WLC) devices with software 7.6.x, 8.0 before 8.0.121.0, and 8.1 before 8.1.131.0 allow remote attackers to change configuration settings via unspecified vectors, aka Bug ID CSCuw06153.
Cisco RV110W, RV130W, and RV215W devices have an incorrect RBAC configuration for the default account, which allows remote authenticated users to obtain root access via a login session with that account, aka Bug IDs CSCuv90139, CSCux58175, and CSCux73557.
Cisco EPC3928 devices with EDVA 5.5.10, 5.5.11, and 5.7.1 allow remote attackers to bypass an intended authentication requirement and execute unspecified administrative functions via a crafted HTTP request, aka Bug ID CSCux24941.
A vulnerability in the CLI of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated to access the CLI. A successful exploit could allow the attacker to execute commands with root privileges.
A vulnerability in the Common Access Card (CAC) authentication feature of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass authentication and access the FMC system. The attacker must have a valid CAC to initiate the access attempt. The vulnerability is due to incorrect session invalidation during CAC authentication. An attacker could exploit this vulnerability by performing a CAC-based authentication attempt to an affected system. A successful exploit could allow the attacker to access an affected system with the privileges of a CAC-authenticated user who is currently logged in.
A vulnerability in the CLI of Cisco Connected Mobile Experiences (CMX) could allow an authenticated, local attacker with administrative credentials to bypass restrictions on the CLI. The vulnerability is due to insufficient security mechanisms in the restricted shell implementation. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to escape the restricted shell and execute a set of normally unauthorized commands with the privileges of a non-root user. To exploit this vulnerability, an attacker would need to have valid administrative credentials.
Unspecified vulnerability in the SSH server in (1) Cisco Service Control Engine (SCE) 3.0.x before 3.0.7 and 3.1.x before 3.1.0, and (2) Icon Labs Iconfidant SSH before 2.3.8, allows remote attackers to cause a denial of service (management interface outage) via SSH traffic that occurs during management operations and triggers "illegal I/O operations," aka Bug ID CSCsh49563.
A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.
A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, physical attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by stopping the boot initialization of an affected device. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.
A vulnerability in BIOS authentication management of Cisco 5000 Series Enterprise Network Compute System and Cisco Unified Computing (UCS) E-Series Servers could allow an unauthenticated, local attacker to bypass the BIOS authentication and execute actions as an unprivileged user. The vulnerability is due to improper security restrictions that are imposed by the affected system. An attacker could exploit this vulnerability by submitting an empty password value to an affected device's BIOS authentication prompt. An exploit could allow the attacker to have access to a restricted set of user-level BIOS commands. Cisco Bug IDs: CSCvh83260.
The guest portal in Cisco Identity Services Engine (ISE) 3300 1.2(0.899) does not restrict access to uploaded HTML documents, which allows remote attackers to obtain sensitive information from customized documents via a direct request, aka Bug ID CSCuo78045.
A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.
An issue was discovered in the kernel in NetBSD 7.1. An Access Point (AP) forwards EAPOL frames to other clients even though the sender has not yet successfully authenticated to the AP. This might be abused in projected Wi-Fi networks to launch denial-of-service attacks against connected clients and makes it easier to exploit other vulnerabilities in connected clients.
The telnet service in Cisco Video Surveillance IP Gateway Encoder/Decoder (Standalone and Module) firmware 1.8.1 and earlier, Video Surveillance SP/ISP Decoder Software firmware 1.11.0 and earlier, and the Video Surveillance SP/ISP firmware 1.23.7 and earlier does not require authentication, which allows remote attackers to perform administrative actions, aka CSCsj31729.
Cisco IOS 12.2E, 12.2F, and 12.2S places a "no login" line into the VTY configuration when an administrator makes certain changes to a (1) VTY/AUX or (2) CONSOLE setting on a device without AAA enabled, which allows remote attackers to bypass authentication and obtain a terminal session, a different vulnerability than CVE-1999-0293 and CVE-2005-2105.
A vulnerability in Cisco IOS 15.5(3)M Software for Cisco CallManager Express (CME) could allow an unauthenticated, remote attacker to make unauthorized phone calls. The vulnerability is due to a configuration restriction in the toll-fraud protections component of the affected software. An attacker could exploit this vulnerability to place unauthorized, long-distance phone calls by using an affected system. Cisco Bug IDs: CSCuy40939.
A vulnerability in the password recovery function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password recovery request. An attacker could exploit this vulnerability by submitting a password recovery request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07253.
A vulnerability in the 802.1x multiple-authentication (multi-auth) feature of Cisco IOS Software could allow an unauthenticated, adjacent attacker to bypass the authentication phase on an 802.1x multi-auth port. The vulnerability is due to a logic change error introduced into the code. An attacker could exploit this vulnerability by trying to access an 802.1x multi-auth port after a successful supplicant has authenticated. An exploit could allow the attacker to bypass the 802.1x access controls and obtain access to the network. Cisco Bug IDs: CSCvg69701.
A vulnerability in Web Authentication (WebAuth) clients for the Cisco Wireless LAN Controller (WLC) and Aironet Access Points running Cisco IOS Software could allow an unauthenticated, adjacent attacker to bypass authentication and pass traffic. The vulnerability is due to incorrect implementation of authentication for WebAuth clients in a specific configuration. An attacker could exploit this vulnerability by sending traffic to local network resources without having gone through authentication. A successful exploit could allow the attacker to bypass authentication and pass traffic. This affects Cisco Aironet Access Points running Cisco IOS Software and Cisco Wireless LAN Controller (WLC) releases prior to 8.5.110.0 for the following specific WLC configuration only: (1) The Access Point (AP) is configured in FlexConnect Mode with NAT. (2) The WLAN is configured for central switching, meaning the client is being assigned a unique IP address. (3) The AP is configured with a Split Tunnel access control list (ACL) for access to local network resources, meaning the AP is doing the NAT on the connection. (4) The client is using WebAuth. This vulnerability does not apply to .1x clients in the same configuration. Cisco Bug IDs: CSCvc79502, CSCvf71789.
A vulnerability in the FTP server of the Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to log in to the FTP server of the device without a valid password. The attacker does need to have a valid username. The vulnerability is due to incorrect FTP user credential validation. An attacker could exploit this vulnerability by using FTP to connect to the management IP address of the targeted device. A successful exploit could allow the attacker to log in to the FTP server of the Cisco WSA without having a valid password. This vulnerability affects Cisco AsyncOS for WSA Software on both virtual and hardware appliances that are running any release of Cisco AsyncOS 10.5.1 for WSA Software. The device is vulnerable only if FTP is enabled on the management interface. FTP is disabled by default. Cisco Bug IDs: CSCvf74281.
A vulnerability in the session identification management functionality of the web-based interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to hijack a valid user session on an affected system. The vulnerability exists because the affected software does not properly clear previously assigned session identifiers for a user session when a user authenticates to the web-based interface. An attacker could exploit this vulnerability by using an existing session identifier to connect to the software through the web-based interface. Successful exploitation could allow the attacker to hijack an authenticated user's browser session on the system. Versions 8.1 and 8.5 are affected.