A vulnerability in the web interface of the Cisco RV132W ADSL2+ Wireless-N VPN and RV134W VDSL2 Wireless-AC VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system, including issuing commands with root privileges. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to an incomplete input validation on user-controlled input in an HTTP request to the targeted device. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to execute arbitrary code as the root user and gain full control of the affected system or cause it to reload, resulting in a DoS condition. This vulnerability is fixed in firmware version 1.0.1.11 for the following Cisco products: RV132W ADSL2+ Wireless-N VPN Router and RV134W VDSL2 Wireless-AC VPN Router. Cisco Bug IDs: CSCvg92737, CSCvh60170.

A vulnerability in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. This vulnerability is due to insufficient user input validation. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on an affected device using root-level privileges. Due to the nature of the vulnerability, only commands without parameters can be executed.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to read sensitive memory content, create a denial of service (DoS) condition, or execute arbitrary code as root. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow or buffer overread condition in the Cisco Fabric Services component, which could allow the attacker to read sensitive memory content, create a DoS condition, or execute arbitrary code as root. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69951, CSCve02459, CSCve02461, CSCve02463, CSCve02474, CSCve04859.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0506 was found.

A Remote Code Execution vulnerability in Hewlett Packard Enterprise Moonshot Provisioning Manager Appliance version v1.20 was found.

The DNS Proxy in Palo Alto Networks PAN-OS before 6.1.18, 7.x before 7.0.16, 7.1.x before 7.1.11, and 8.x before 8.0.3 allows remote attackers to execute arbitrary code via a crafted domain name.

A Remote Code Execution vulnerability in Hewlett Packard Enterprise Moonshot Provisioning Manager Appliance version v1.20 was found.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.2 was found.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P04 was found.

In ApexPro Telemetry Server Versions 4.2 and prior, CARESCAPE Telemetry Server v4.2 & prior, Clinical Information Center (CIC) Versions 4.X and 5.X, CARESCAPE Central Station (CSCS) Versions 1.X, the affected products utilized hard coded SMB credentials, which may allow an attacker to remotely execute arbitrary code.

In ApexPro Telemetry Server, Versions 4.2 and prior, CARESCAPE Telemetry Server v4.2 & prior, Clinical Information Center (CIC) Versions 4.X and 5.X, CARESCAPE Telemetry Server Version 4.3, CARESCAPE Central Station (CSCS) Versions 1.X CARESCAPE Central Station (CSCS) Versions 2.X, B450 Version 2.X, B650 Version 1.X, B650 Version 2.X, B850 Version 1.X, B850 Version 2.X, an input validation vulnerability exists in the web-based system configuration utility that could allow an attacker to obtain arbitrary remote code execution.

Trend Micro ServerProtect for Linux 3.0 before CP 1531 allows attackers to write to arbitrary files and consequently execute arbitrary code with root privileges by leveraging failure to validate software updates.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.2 was found.

Multiple FRISK Software F-Prot anti-virus products, including Antivirus for Exchange, Linux on IBM zSeries, Linux x86 File Servers, Linux x86 Mail Servers, Linux x86 Workstations, Solaris Mail Servers, Antivirus for Windows, and others, allow remote attackers to bypass malware detection via a crafted CAB archive.

Zoho ManageEngine Desktop Central before build 100082 allows remote attackers to obtain control over all connected active desktops via unspecified vectors.

A vulnerability in the update process for the dynamic JAR file of the Cisco Context Service software development kit (SDK) could allow an unauthenticated, remote attacker to execute arbitrary code on the affected device with the privileges of the web server. More Information: CSCvb66730. Known Affected Releases: 2.0.

Astaro Security Gateway (aka ASG) 7 allows remote attackers to execute arbitrary code via a crafted request to index.plx.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P04 was found.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.2 was found.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P04 was found.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P04 was found.

EMC VASA Provider Virtual Appliance versions 8.3.x and prior has an unauthenticated remote code execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.

The Backbone service (ftbackbone.exe) in EMC AutoStart before 5.3 SP2 allows remote attackers to execute arbitrary code via a packet with a crafted value that is dereferenced as a function pointer.

A vulnerability in a proprietary device driver in the kernel of Cisco TelePresence Multipoint Control Unit (MCU) Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability is due to improper size validation when reassembling fragmented IPv4 or IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv4 or IPv6 fragments to a port receiving content in Passthrough content mode. An exploit could allow the attacker to overflow a buffer. If successful, the attacker could execute arbitrary code or cause a DoS condition on the affected system. Cisco TelePresence MCU platforms TelePresence MCU 5300 Series, TelePresence MCU MSE 8510 and TelePresence MCU 4500 are affected when running software version 4.3(1.68) or later configured for Passthrough content mode. Cisco has released software updates that address this vulnerability. Workarounds that address this vulnerability are not available, but mitigations are available. Cisco Bug IDs: CSCuu67675.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

GIGABYTE BRIX UEFI firmware for the GB-BSi7H-6500 (version F6) and GB-BXi7-5775 (version F2) platforms does not securely implement BIOSWE, BLE, SMM_BWP, and PRx features. As a result, the BIOS is not protected from arbitrary write access and may permit modifications to the SPI flash.

Adobe Captivate versions 9 and earlier have a remote code execution vulnerability in the quiz reporting feature that could be abused to read and write arbitrary files to the server.

The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959.

An issue was discovered in certain Apple products. iOS before 10.3 is affected. The issue involves the "HomeKit" component. It allows attackers to have an unspecified impact by leveraging the presence of Home Control on Control Center.

Smarty before 3.0.0 beta 7 does not properly handle the <?php and ?> tags, which has unspecified impact and remote attack vectors.

The web interface on the Technicolor TC7230 STEB 01.25 is vulnerable to DNS rebinding, which allows a remote attacker to configure the cable modem via JavaScript in a victim's browser. The attacker can then configure the cable modem to port forward the modem's internal TELNET server, allowing external access to a root shell.

parseObject in Fastjson before 1.2.25, as used in FastjsonEngine in Pippo 1.11.0 and other products, allows remote attackers to execute arbitrary code via a crafted JSON request, as demonstrated by a crafted rmi:// URI in the dataSourceName field of HTTP POST data to the Pippo /json URI, which is mishandled in AjaxApplication.java.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation while processing an encrypted authentication management frame in lim_send_auth_mgmt_frame() leads to buffer overflow.

In Android before security patch level 2018-04-05 on Qualcomm Snapdragon Mobile and Snapdragon Wear MDM9607, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8909W, SD 210/SD 212/SD 205, SD 400, SD 410/12, SD 425, SD 430, SD 615/16/SD 415, SD 800, SD 808, SD 810, SD 820, SD 835, while playing a .wma file with modified media header with non-standard bytes per second parameter value, a reachable assert occurs.

Missing validation check on CRL issuer name in Snapdragon Automobile, Snapdragon Mobile in versions MSM8996AU, SD 410/12, SD 425, SD 430, SD 450, SD 625, SD 650/52, SD 810, SD 820, SD 820A.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, handles in the global client structure can become stale.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, a count value that is read from a file is not properly validated.

In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, the SafeSwitch test application does not properly validate the number of blocks to verify.

A remote code execution vulnerability in the Android media framework (n/a). Product: Android. Versions: 7.0, 7.1.1, 7.1.2, 8.0, 8.1. ID: A-68160703.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute code with root-level privileges on the underlying operating system. This vulnerability exist because the software improperly validates user-supplied input. An attacker could exploit this vulnerability by uploading a malicious file to the administrative web interface. A successful exploit could allow the attacker to execute code with root-level privileges on the underlying operating system.

Proxy command injection vulnerability in Trend Micro OfficeScan 11 and XG (12) allows remote attackers to execute arbitrary code on vulnerable installations. The specific flaw can be exploited by parsing the T parameter within Proxy.php. Formerly ZDI-CAN-4544.

In Network Security Services (NSS) before 3.46, several cryptographic primitives had missing length checks. In cases where the application calling the library did not perform a sanity check on the inputs it could result in a crash due to a buffer overflow.

An issue has been discovered on the Belden Hirschmann Tofino Xenon Security Appliance before 03.2.00. Design flaws in OPC classic and in custom netfilter modules allow an attacker to remotely activate rules on the firewall and to connect to any TCP port of a protected asset, thus bypassing the firewall. The attack methodology is a crafted OPC dynamic port shift.