jaxb/JaxbEngine.java in Pippo 1.11.0 allows XXE.
An issue was discovered in Pippo 1.11.0. The function SerializationSessionDataTranscoder.decode() calls ObjectInputStream.readObject() to deserialize a SessionData object without checking the object types. An attacker can create a malicious object, base64 encode it, and place it in the PIPPO_SESSION field of a cookie. Sending this cookie may lead to remote code execution.
Pippo through 1.11.0 allows remote code execution via a command to java.lang.ProcessBuilder because the XstreamEngine component does not use XStream's available protection mechanisms to restrict unmarshalling.
In libzypp before August 2018 GPG keys attached to YUM repositories were not correctly pinned, allowing malicious repository mirrors to silently downgrade to unsigned repositories with potential malicious content.
install/make-config.php in ProjectSend r754 allows remote attackers to execute arbitrary PHP code via the dbprefix parameter, related to replacing TABLES_PREFIX in the configuration file.
A maliciously constructed svn+ssh:// URL would cause Subversion clients before 1.8.19, 1.9.x before 1.9.7, and 1.10.0.x through 1.10.0-alpha3 to run an arbitrary shell command. Such a URL could be generated by a malicious server, by a malicious user committing to a honest server (to attack another user of that server's repositories), or by a proxy server. The vulnerability affects all clients, including those that use file://, http://, and plain (untunneled) svn://.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P04 was found.
libautotrace.a in AutoTrace 0.31.1 has a "left shift ... cannot be represented in type int" issue in input-bmp.c:516:63.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0506 was found.
The UMA product with software V200R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.
A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to information that they are not authorized to access, make changes to the system that they are not authorized to make, and execute commands on an affected system with privileges of the root user.
The UMA product with software V200R001 and V300R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.
The DNS Proxy in Palo Alto Networks PAN-OS before 6.1.18, 7.x before 7.0.16, 7.1.x before 7.1.11, and 8.x before 8.0.3 allows remote attackers to execute arbitrary code via a crafted domain name.
Malicious PATCH requests submitted to servers using Spring Data REST versions prior to 2.6.9 (Ingalls SR9), versions prior to 3.0.1 (Kay SR1) and Spring Boot versions prior to 1.5.9, 2.0 M6 can use specially crafted JSON data to run arbitrary Java code.
The UMA product with software V200R001 and V300R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.
An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.
An issue was discovered in api/includes/systems.php in Unitrends Enterprise Backup before 9.0.0. User input is not properly filtered before being sent to a popen function. This allows for remote code execution by sending a specially crafted user variable.
An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.
Apache Struts 2 before 2.2.3.1 evaluates a string as an OGNL expression during the handling of a conversion error, which allows remote attackers to modify run-time data values, and consequently execute arbitrary code, via invalid input to a field.
A weak password recovery process vulnerability in Fortinet FortiPortal versions 4.0.0 and below allows an attacker to execute unauthorized code or commands via a hidden Close button
An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.
An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.
Zoho ManageEngine Desktop Central before build 100082 allows remote attackers to obtain control over all connected active desktops via unspecified vectors.
An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.
An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P04 was found.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P04 was found.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P04 was found.
Pexip Infinity before 14.2 allows remote attackers to cause a denial of service (service restart) or execute arbitrary code via vectors related to Conferencing Nodes.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.2 was found.
A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.2 was found.
Astaro Security Gateway (aka ASG) 7 allows remote attackers to execute arbitrary code via a crafted request to index.plx.
An issue was discovered in ASPCMS 2.5.6. When registering ordinary users in the addUser function of the /member/reg.asp page, they can be registered with the super administrators GroupID directly.
EMC VASA Provider Virtual Appliance versions 8.3.x and prior has an unauthenticated remote code execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.
A vulnerability in a proprietary device driver in the kernel of Cisco TelePresence Multipoint Control Unit (MCU) Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability is due to improper size validation when reassembling fragmented IPv4 or IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv4 or IPv6 fragments to a port receiving content in Passthrough content mode. An exploit could allow the attacker to overflow a buffer. If successful, the attacker could execute arbitrary code or cause a DoS condition on the affected system. Cisco TelePresence MCU platforms TelePresence MCU 5300 Series, TelePresence MCU MSE 8510 and TelePresence MCU 4500 are affected when running software version 4.3(1.68) or later configured for Passthrough content mode. Cisco has released software updates that address this vulnerability. Workarounds that address this vulnerability are not available, but mitigations are available. Cisco Bug IDs: CSCuu67675.
GIGABYTE BRIX UEFI firmware for the GB-BSi7H-6500 (version F6) and GB-BXi7-5775 (version F2) platforms does not securely implement BIOSWE, BLE, SMM_BWP, and PRx features. As a result, the BIOS is not protected from arbitrary write access and may permit modifications to the SPI flash.
The Codextrous B2J Contact (aka b2j_contact) extension before 2.1.13 for Joomla! allows a rename attack that bypasses a "safe file extension" protection mechanism, leading to remote code execution.
A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.
Adobe Captivate versions 9 and earlier have a remote code execution vulnerability in the quiz reporting feature that could be abused to read and write arbitrary files to the server.
An issue was discovered in Pivotal PCF Elastic Runtime 1.6.x versions prior to 1.6.60, 1.7.x versions prior to 1.7.41, 1.8.x versions prior to 1.8.23, and 1.9.x versions prior to 1.9.1. Incomplete validation logic in JSON Web Token (JWT) libraries can allow unprivileged attackers to impersonate other users in multiple components included in PCF Elastic Runtime, aka an "Unauthenticated JWT signing algorithm in multiple components" issue.
On Junos OS devices with SNMP enabled, a network based attacker with unfiltered access to the RE can cause the Junos OS snmpd daemon to crash and restart by sending a crafted SNMP packet. Repeated crashes of the snmpd daemon can result in a partial denial of service condition. Additionally, it may be possible to craft a malicious SNMP packet in a way that can result in remote code execution. SNMP is disabled in Junos OS by default. Junos OS devices with SNMP disabled are not affected by this issue. No other Juniper Networks products or platforms are affected by this issue. NOTE: This is a different issue than Cisco CVE-2017-6736, CVE-2017-6737, and CVE-2017-6738. Affected releases are Juniper Networks Junos OS 12.1X46 prior to 12.1X46-D67; 12.3X48 prior to 12.3X48-D51, 12.3X48-D55; 13.3 prior to 13.3R10-S2; 14.1 prior to 14.1R2-S10, 14.1R8-S4, 14.1R9; 14.1X50 prior to 14.1X50-D185; 14.1X53 prior to 14.1X53-D122, 14.1X53-D44, 14.1X53-D50; 14.2 prior to 14.2R4-S9, 14.2R7-S7, 14.2R8; 15.1 prior to 15.1F2-S18, 15.1F6-S7, 15.1R4-S8, 15.1R5-S5, 15.1R6-S1, 15.1R7; 15.1X49 prior to 15.1X49-D100, 15.1X49-D110; 15.1X53 prior to 15.1X53-D231, 15.1X53-D47, 15.1X53-D48, 15.1X53-D57, 15.1X53-D64, 15.1X53-D70; 16.1 prior to 16.1R3-S4, 16.1R4-S3, 16.1R4-S4, 16.1R5; 16.2 prior to 16.2R2, 16.2R3; 17.1 prior to 17.1R1-S3, 17.1R2, 17.1R3; 17.2 prior to 17.2R1-S1, 17.2R2; 17.2X75 prior to 17.2X75-D30. Junos releases prior to 10.2 are not affected.
Insufficient Solution DLL Signature Validation allows potential execution of arbitrary code in HP LaserJet Enterprise printers, HP PageWide Enterprise printers, HP LaserJet Managed printers, HP OfficeJet Enterprise printers before 2308937_578479, 2405087_018548, and other firmware versions.
The shortcodes-ultimate plugin before 5.0.1 for WordPress has remote code execution via a filter in a meta, post, or user shortcode.
In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, in MMCP, a downlink message is not being properly validated.
Parallels Plesk Small Business Panel 10.2.0 does not properly validate string data that is intended for storage in an XML document, which allows remote attackers to cause a denial of service (parsing error) or possibly have unspecified other impact via a crafted cookie, as demonstrated by cookies to client@1/domain@1/hosting/file-manager/ and certain other files.
In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, improper input validation while processing an encrypted authentication management frame in lim_send_auth_mgmt_frame() leads to buffer overflow.
The Server Administration Panel in Parallels Plesk Panel 10.2.0_build1011110331.18 does not properly validate string data that is intended for storage in an XML document, which allows remote attackers to cause a denial of service (parsing error) or possibly have unspecified other impact via a crafted REST URL parameter, as demonstrated by parameters to admin/ and certain other files.
Indeo Otter through 1.7.4 mishandles a "</script>" substring in an initial DP payload, which allows remote attackers to cause a denial of service (crash) or possibly have unspecified other impact, as demonstrated by the Plan Editor.
In MB connect line mbDIALUP versions <= 3.9R0.0 a remote attacker can send a specifically crafted HTTP request to the service running with NT AUTHORITY\SYSTEM that will not correctly validate the input. This can lead to an arbitrary code execution with the privileges of the service.
A malicious X-ProxyContextPath or X-Forwarded-Context header containing external resources or embedded code could cause remote code execution. The fix to properly handle these headers was applied on the Apache NiFi 1.5.0 release. Users running a prior 1.x release should upgrade to the appropriate release.