A flaw was found in the Linux 4.x kernel's implementation of 32-bit syscall interface for bridging. This allowed a privileged user to arbitrarily write to a limited range of kernel memory.

mm/memory.c in the Linux kernel before 4.1.4 mishandles anonymous pages, which allows local users to gain privileges or cause a denial of service (page tainting) via a crafted application that triggers writing to page zero.

net/socket.c in the Linux kernel 3.19 before 3.19.3 does not validate certain range data for (1) sendto and (2) recvfrom system calls, which allows local users to gain privileges by leveraging a subsystem that uses the copy_from_iter function in the iov_iter interface, as demonstrated by the Bluetooth subsystem.

hci_conn_cleanup in net/bluetooth/hci_conn.c in the Linux kernel through 6.2.9 has a use-after-free (observed in hci_conn_hash_flush) because of calls to hci_dev_put and hci_conn_put. There is a double free that may lead to privilege escalation.

A double-free flaw was found in the Linux kernel’s NTFS3 subsystem in how a user triggers remount and umount simultaneously. This flaw allows a local user to crash or potentially escalate their privileges on the system.

IBM InfoSphere DataStage 8.1, 8.5, 8.7, 9.1, and 11.3 through 11.3.1.2 on UNIX allows local users to write to executable files, and consequently obtain root privileges, via unspecified vectors.

Improper access control in some Intel(R) Aptio* V UEFI Firmware Integrator Tools may allow an authenticated to potentially enable escalation of privileges via local access.

network backend may cause Linux netfront to use freed SKBs While adding logic to support XDP (eXpress Data Path), a code label was moved in a way allowing for SKBs having references (pointers) retained for further processing to nevertheless be freed.

The (1) pipe_read and (2) pipe_write implementations in fs/pipe.c in the Linux kernel before 3.16 do not properly consider the side effects of failed __copy_to_user_inatomic and __copy_from_user_inatomic calls, which allows local users to cause a denial of service (system crash) or possibly gain privileges via a crafted application, aka an "I/O vector array overrun."

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix use-after-free on disconnect The vub300 driver maintains an explicit reference count for the controller and its driver data and the last reference can in theory be dropped after the driver has been unbound. This specifically means that the controller allocation must not be device managed as that can lead to use-after-free. Note that the lifetime is currently also incorrectly tied the parent USB device rather than interface, which can lead to memory leaks if the driver is unbound without its device being physically disconnected (e.g. on probe deferral). Fix both issues by reverting to non-managed allocation of the controller.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate control request size f_audio_complete() copies req->length bytes into a 4-byte stack variable: u32 data = 0; memcpy(&data, req->buf, req->length); req->length is derived from the host-controlled USB request path, which can lead to a stack out-of-bounds write. Validate req->actual against the expected payload size for the supported control selectors and decode only the expected amount of data. This avoids copying a host-influenced length into a fixed-size stack object.

In the Linux kernel, the following vulnerability has been resolved: mm/kasan: fix double free for kasan pXds kasan_free_pxd() assumes the page table is always struct page aligned. But that's not always the case for all architectures. E.g. In case of powerpc with 64K pagesize, PUD table (of size 4096) comes from slab cache named pgtable-2^9. Hence instead of page_to_virt(pxd_page()) let's just directly pass the start of the pxd table which is passed as the 1st argument. This fixes the below double free kasan issue seen with PMEM: radix-mmu: Mapped 0x0000047d10000000-0x0000047f90000000 with 2.00 MiB pages ================================================================== BUG: KASAN: double-free in kasan_remove_zero_shadow+0x9c4/0xa20 Free of addr c0000003c38e0000 by task ndctl/2164 CPU: 34 UID: 0 PID: 2164 Comm: ndctl Not tainted 6.19.0-rc1-00048-gea1013c15392 #157 VOLUNTARY Hardware name: IBM,9080-HEX POWER10 (architected) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_012) hv:phyp pSeries Call Trace: dump_stack_lvl+0x88/0xc4 (unreliable) print_report+0x214/0x63c kasan_report_invalid_free+0xe4/0x110 check_slab_allocation+0x100/0x150 kmem_cache_free+0x128/0x6e0 kasan_remove_zero_shadow+0x9c4/0xa20 memunmap_pages+0x2b8/0x5c0 devm_action_release+0x54/0x70 release_nodes+0xc8/0x1a0 devres_release_all+0xe0/0x140 device_unbind_cleanup+0x30/0x120 device_release_driver_internal+0x3e4/0x450 unbind_store+0xfc/0x110 drv_attr_store+0x78/0xb0 sysfs_kf_write+0x114/0x140 kernfs_fop_write_iter+0x264/0x3f0 vfs_write+0x3bc/0x7d0 ksys_write+0xa4/0x190 system_call_exception+0x190/0x480 system_call_vectored_common+0x15c/0x2ec ---- interrupt: 3000 at 0x7fff93b3d3f4 NIP: 00007fff93b3d3f4 LR: 00007fff93b3d3f4 CTR: 0000000000000000 REGS: c0000003f1b07e80 TRAP: 3000 Not tainted (6.19.0-rc1-00048-gea1013c15392) MSR: 800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 48888208 XER: 00000000 <...> NIP [00007fff93b3d3f4] 0x7fff93b3d3f4 LR [00007fff93b3d3f4] 0x7fff93b3d3f4 ---- interrupt: 3000 The buggy address belongs to the object at c0000003c38e0000 which belongs to the cache pgtable-2^9 of size 4096 The buggy address is located 0 bytes inside of 4096-byte region [c0000003c38e0000, c0000003c38e1000) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x3c38c head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 memcg:c0000003bfd63e01 flags: 0x63ffff800000040(head|node=6|zone=0|lastcpupid=0x7ffff) page_type: f5(slab) raw: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000 raw: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01 head: 063ffff800000040 c000000140058980 5deadbeef0000122 0000000000000000 head: 0000000000000000 0000000080200020 00000000f5000000 c0000003bfd63e01 head: 063ffff800000002 c00c000000f0e301 00000000ffffffff 00000000ffffffff head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000004 page dumped because: kasan: bad access detected [ 138.953636] [ T2164] Memory state around the buggy address: [ 138.953643] [ T2164] c0000003c38dff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953652] [ T2164] c0000003c38dff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953661] [ T2164] >c0000003c38e0000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953669] [ T2164] ^ [ 138.953675] [ T2164] c0000003c38e0080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953684] [ T2164] c0000003c38e0100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 138.953692] [ T2164] ================================================================== [ 138.953701] [ T2164] Disabling lock debugging due to kernel taint

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Limit PTP to a single page Commit 391e69143d0a increased CT_PTP_NUM from 1 to 4 to support 256 playback streams, but the additional pages are not used by the card correctly. The CT20K2 hardware already has multiple VMEM_PTPAL registers, but using them separately would require refactoring the entire virtual memory allocation logic. ct_vm_map() always uses PTEs in vm->ptp[0].area regardless of CT_PTP_NUM. On AMD64 systems, a single PTP covers 512 PTEs (2M). When aggregate memory allocations exceed this limit, ct_vm_map() tries to access beyond the allocated space and causes a page fault: BUG: unable to handle page fault for address: ffffd4ae8a10a000 Oops: Oops: 0002 [#1] SMP PTI RIP: 0010:ct_vm_map+0x17c/0x280 [snd_ctxfi] Call Trace: atc_pcm_playback_prepare+0x225/0x3b0 ct_pcm_playback_prepare+0x38/0x60 snd_pcm_do_prepare+0x2f/0x50 snd_pcm_action_single+0x36/0x90 snd_pcm_action_nonatomic+0xbf/0xd0 snd_pcm_ioctl+0x28/0x40 __x64_sys_ioctl+0x97/0xe0 do_syscall_64+0x81/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e Revert CT_PTP_NUM to 1. The 256 SRC_RESOURCE_NUM and playback_count remain unchanged.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix slab-use-after-free due to dangling pointer dqi_priv When mounting ocfs2 and then remounting it as read-only, a slab-use-after-free occurs after the user uses a syscall to quota_getnextquota. Specifically, sb_dqinfo(sb, type)->dqi_priv is the dangling pointer. During the remounting process, the pointer dqi_priv is freed but is never set as null leaving it to be accessed. Additionally, the read-only option for remounting sets the DQUOT_SUSPENDED flag instead of setting the DQUOT_USAGE_ENABLED flags. Moreover, later in the process of getting the next quota, the function ocfs2_get_next_id is called and only checks the quota usage flags and not the quota suspended flags. To fix this, I set dqi_priv to null when it is freed after remounting with read-only and put a check for DQUOT_SUSPENDED in ocfs2_get_next_id. [akpm@linux-foundation.org: coding-style cleanups]

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: flowlabel: defer exclusive option free until RCU teardown `ip6fl_seq_show()` walks the global flowlabel hash under the seq-file RCU read-side lock and prints `fl->opt->opt_nflen` when an option block is present. Exclusive flowlabels currently free `fl->opt` as soon as `fl->users` drops to zero in `fl_release()`. However, the surrounding `struct ip6_flowlabel` remains visible in the global hash table until later garbage collection removes it and `fl_free_rcu()` finally tears it down. A concurrent `/proc/net/ip6_flowlabel` reader can therefore race that early `kfree()` and dereference freed option state, triggering a crash in `ip6fl_seq_show()`. Fix this by keeping `fl->opt` alive until `fl_free_rcu()`. That matches the lifetime already required for the enclosing flowlabel while readers can still reach it under RCU.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix use-after-free of sbi in f2fs_compress_write_end_io() In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring the F2FS_WB_CP_DATA counter to zero, unblocking f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount CPU. The unmount path then proceeds to call f2fs_destroy_page_array_cache(sbi), which destroys sbi->page_array_slab via kmem_cache_destroy(), and eventually kfree(sbi). Meanwhile, the bio completion callback is still executing: when it reaches page_array_free(sbi, ...), it dereferences sbi->page_array_slab — a destroyed slab cache — to call kmem_cache_free(), causing a use-after-free. This is the same class of bug as CVE-2026-23234 (which fixed the equivalent race in f2fs_write_end_io() in data.c), but in the compressed writeback completion path that was not covered by that fix. Fix this by moving dec_page_count() to after page_array_free(), so that all sbi accesses complete before the counter decrement that can unblock unmount. For non-last folios (where atomic_dec_return on cic->pending_pages is nonzero), dec_page_count is called immediately before returning — page_array_free is not reached on this path, so there is no post-decrement sbi access. For the last folio, page_array_free runs while the F2FS_WB_CP_DATA counter is still nonzero (this folio has not yet decremented it), keeping sbi alive, and dec_page_count runs as the final operation.

In the Linux kernel, the following vulnerability has been resolved: hrtimers: Handle CPU state correctly on hotplug Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to CPUHP_ONLINE: Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set to 1 throughout. However, during a CPU unplug operation, the tick and the clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online state, for instance CFS incorrectly assumes that the hrtick is already active, and the chance of the clockevent device to transition to oneshot mode is also lost forever for the CPU, unless it goes back to a lower state than CPUHP_HRTIMERS_PREPARE once. This round-trip reveals another issue; cpu_base.online is not set to 1 after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer(). Aside of that, the bulk of the per CPU state is not reset either, which means there are dangling pointers in the worst case. Address this by adding a corresponding startup() callback, which resets the stale per CPU state and sets the online flag. [ tglx: Make the new callback unconditionally available, remove the online modification in the prepare() callback and clear the remaining state in the starting callback instead of the prepare callback ]

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject struct_ops registration that uses module ptr and the module btf_id is missing There is a UAF report in the bpf_struct_ops when CONFIG_MODULES=n. In particular, the report is on tcp_congestion_ops that has a "struct module *owner" member. For struct_ops that has a "struct module *owner" member, it can be extended either by the regular kernel module or by the bpf_struct_ops. bpf_try_module_get() will be used to do the refcounting and different refcount is done based on the owner pointer. When CONFIG_MODULES=n, the btf_id of the "struct module" is missing: WARN: resolve_btfids: unresolved symbol module Thus, the bpf_try_module_get() cannot do the correct refcounting. Not all subsystem's struct_ops requires the "struct module *owner" member. e.g. the recent sched_ext_ops. This patch is to disable bpf_struct_ops registration if the struct_ops has the "struct module *" member and the "struct module" btf_id is missing. The btf_type_is_fwd() helper is moved to the btf.h header file for this test. This has happened since the beginning of bpf_struct_ops which has gone through many changes. The Fixes tag is set to a recent commit that this patch can apply cleanly. Considering CONFIG_MODULES=n is not common and the age of the issue, targeting for bpf-next also.

In the Linux kernel, the following vulnerability has been resolved: firmware: thead: Fix buffer overflow and use standard endian macros Addresses two issues in the TH1520 AON firmware protocol driver: 1. Fix a potential buffer overflow where the code used unsafe pointer arithmetic to access the 'mode' field through the 'resource' pointer with an offset. This was flagged by Smatch static checker as: "buffer overflow 'data' 2 <= 3" 2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard kernel endianness conversion macros (cpu_to_be16, etc.) for better portability and maintainability. The functionality was re-tested with the GPU power-up sequence, confirming the GPU powers up correctly and the driver probes successfully. [ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware powervr/rogue_36.52.104.182_v1.fw [ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build 6645434 OS) [ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on minor 0

In the Linux kernel, the following vulnerability has been resolved: Buffer overflow in drivers/xen/sys-hypervisor.c The build id returned by HYPERVISOR_xen_version(XENVER_build_id) is neither NUL terminated nor a string. The first causes a buffer overflow as sprintf in buildid_show will read and copy till it finds a NUL. 00000000 f4 91 51 f4 dd 38 9e 9d 65 47 52 eb 10 71 db 50 |..Q..8..eGR..q.P| 00000010 b9 a8 01 42 6f 2e 32 |...Bo.2| 00000017 So use a memcpy instead of sprintf to have the correct value: 00000000 f4 91 51 f4 dd 00 9e 9d 65 47 52 eb 10 71 db 50 |..Q.....eGR..q.P| 00000010 b9 a8 01 42 |...B| 00000014 (the above have a hack to embed a zero inside and check it's returned correctly). This is XSA-485 / CVE-2026-31786

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix UAF caused by decrementing sbi->nr_pages[] in f2fs_write_end_io() The xfstests case "generic/107" and syzbot have both reported a NULL pointer dereference. The concurrent scenario that triggers the panic is as follows: F2FS_WB_CP_DATA write callback umount - f2fs_write_checkpoint - f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA) - blk_mq_end_request - bio_endio - f2fs_write_end_io : dec_page_count(sbi, F2FS_WB_CP_DATA) : wake_up(&sbi->cp_wait) - kill_f2fs_super - kill_block_super - f2fs_put_super : iput(sbi->node_inode) : sbi->node_inode = NULL : f2fs_in_warm_node_list - is_node_folio // sbi->node_inode is NULL and panic The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is decremented to zero. As a result, f2fs_in_warm_node_list() may dereference a NULL node_inode when checking whether a folio belongs to the node inode, leading to a panic. This patch fixes the issue by calling f2fs_in_warm_node_list() before decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the use-after-free condition.

In the Linux kernel, the following vulnerability has been resolved: usb: ulpi: fix double free in ulpi_register_interface() error path When device_register() fails, ulpi_register() calls put_device() on ulpi->dev. The device release callback ulpi_dev_release() drops the OF node reference and frees ulpi, but the current error path in ulpi_register_interface() then calls kfree(ulpi) again, causing a double free. Let put_device() handle the cleanup through ulpi_dev_release() and avoid freeing ulpi again in ulpi_register_interface().

In the Linux kernel, the following vulnerability has been resolved: fuse: reject oversized dirents in page cache fuse_add_dirent_to_cache() computes a serialized dirent size from the server-controlled namelen field and copies the dirent into a single page-cache page. The existing logic only checks whether the dirent fits in the remaining space of the current page and advances to a fresh page if not. It never checks whether the dirent itself exceeds PAGE_SIZE. As a result, a malicious FUSE server can return a dirent with namelen=4095, producing a serialized record size of 4120 bytes. On 4 KiB page systems this causes memcpy() to overflow the cache page by 24 bytes into the following kernel page. Reject dirents that cannot fit in a single page before copying them into the readdir cache.

In the Linux kernel, the following vulnerability has been resolved: writeback: Fix use after free in inode_switch_wbs_work_fn() inode_switch_wbs_work_fn() has a loop like: wb_get(new_wb); while (1) { list = llist_del_all(&new_wb->switch_wbs_ctxs); /* Nothing to do? */ if (!list) break; ... process the items ... } Now adding of items to the list looks like: wb_queue_isw() if (llist_add(&isw->list, &wb->switch_wbs_ctxs)) queue_work(isw_wq, &wb->switch_work); Because inode_switch_wbs_work_fn() loops when processing isw items, it can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is empty. This is a problem because in that case wb can get freed (no isw items -> no wb reference) while the work is still pending causing use-after-free issues. We cannot just fix this by cancelling work when freeing wb because that could still trigger problematic 0 -> 1 transitions on wb refcount due to wb_get() in inode_switch_wbs_work_fn(). It could be all handled with more careful code but that seems unnecessarily complex so let's avoid that until it is proven that the looping actually brings practical benefit. Just remove the loop from inode_switch_wbs_work_fn() instead. That way when wb_queue_isw() queues work, we are guaranteed we have added the first item to wb->switch_wbs_ctxs and nobody is going to remove it (and drop the wb reference it holds) until the queued work runs.

In the Linux kernel, the following vulnerability has been resolved: exfat: fix the new buffer was not zeroed before writing Before writing, if a buffer_head marked as new, its data must be zeroed, otherwise uninitialized data in the page cache will be written. So this commit uses folio_zero_new_buffers() to zero the new buffers before ->write_end().

In the Linux kernel, the following vulnerability has been resolved: rxrpc: proc: size address buffers for %pISpc output The AF_RXRPC procfs helpers format local and remote socket addresses into fixed 50-byte stack buffers with "%pISpc". That is too small for the longest current-tree IPv6-with-port form the formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a dotted-quad tail not only for v4mapped addresses, but also for ISATAP addresses via ipv6_addr_is_isatap(). As a result, a case such as [ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535 is possible with the current formatter. That is 50 visible characters, so 51 bytes including the trailing NUL, which does not fit in the existing char[50] buffers used by net/rxrpc/proc.c. Size the buffers from the formatter's maximum textual form and switch the call sites to scnprintf(). Changes since v1: - correct the changelog to cite the actual maximum current-tree case explicitly - frame the proof around the ISATAP formatting path instead of the earlier mapped-v4 example

arch/powerpc/kvm/book3s_rtas.c in the Linux kernel through 5.13.5 on the powerpc platform allows KVM guest OS users to cause host OS memory corruption via rtas_args.nargs, aka CID-f62f3c20647e.

In the Linux kernel, the following vulnerability has been resolved: media: intel/ipu6: remove cpu latency qos request on error Fix cpu latency qos list corruption like below. It happens when we do not remove cpu latency request on error path and free corresponding memory. [ 30.634378] l7 kernel: list_add corruption. prev->next should be next (ffffffff9645e960), but was 0000000100100001. (prev=ffff8e9e877e20a8). [ 30.634388] l7 kernel: WARNING: CPU: 2 PID: 2008 at lib/list_debug.c:32 __list_add_valid_or_report+0x83/0xa0 <snip> [ 30.634640] l7 kernel: Call Trace: [ 30.634650] l7 kernel: <TASK> [ 30.634659] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0 [ 30.634669] l7 kernel: ? __warn.cold+0x93/0xf6 [ 30.634678] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0 [ 30.634690] l7 kernel: ? report_bug+0xff/0x140 [ 30.634702] l7 kernel: ? handle_bug+0x58/0x90 [ 30.634712] l7 kernel: ? exc_invalid_op+0x17/0x70 [ 30.634723] l7 kernel: ? asm_exc_invalid_op+0x1a/0x20 [ 30.634733] l7 kernel: ? __list_add_valid_or_report+0x83/0xa0 [ 30.634742] l7 kernel: plist_add+0xdd/0x140 [ 30.634754] l7 kernel: pm_qos_update_target+0xa0/0x1f0 [ 30.634764] l7 kernel: cpu_latency_qos_update_request+0x61/0xc0 [ 30.634773] l7 kernel: intel_dp_aux_xfer+0x4c7/0x6e0 [i915 1f824655ed04687c2b0d23dbce759fa785f6d033]

In the Linux kernel, the following vulnerability has been resolved: i2c: s3c24xx: check the size of the SMBUS message before using it The first byte of an i2c SMBUS message is the size, and it should be verified to ensure that it is in the range of 0..I2C_SMBUS_BLOCK_MAX before processing it. This is the same logic that was added in commit a6e04f05ce0b ("i2c: tegra: check msg length in SMBUS block read") to the i2c tegra driver.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_notify_common() The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a 7-bit field (0-127) that is used to index into the connector array in ucsi_connector_change(). However, the array is only allocated for the number of connectors reported by the device (typically 2-4 entries). A malicious or malfunctioning device could report an out-of-range connector number in the CCI, causing an out-of-bounds array access in ucsi_connector_change(). Add a bounds check in ucsi_notify_common(), the central point where CCI is parsed after arriving from hardware, so that bogus connector numbers are rejected before they propagate further.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix use-after-free in timeout object destroy nft_ct_timeout_obj_destroy() frees the timeout object with kfree() immediately after nf_ct_untimeout(), without waiting for an RCU grace period. Concurrent packet processing on other CPUs may still hold RCU-protected references to the timeout object obtained via rcu_dereference() in nf_ct_timeout_data(). Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer freeing until after an RCU grace period, matching the approach already used in nfnetlink_cttimeout.c. KASAN report: BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0 Read of size 4 at addr ffff8881035fe19c by task exploit/80 Call Trace: nf_conntrack_tcp_packet+0x1381/0x29d0 nf_conntrack_in+0x612/0x8b0 nf_hook_slow+0x70/0x100 __ip_local_out+0x1b2/0x210 tcp_sendmsg_locked+0x722/0x1580 __sys_sendto+0x2d8/0x320 Allocated by task 75: nft_ct_timeout_obj_init+0xf6/0x290 nft_obj_init+0x107/0x1b0 nf_tables_newobj+0x680/0x9c0 nfnetlink_rcv_batch+0xc29/0xe00 Freed by task 26: nft_obj_destroy+0x3f/0xa0 nf_tables_trans_destroy_work+0x51c/0x5c0 process_one_work+0x2c4/0x5a0

In the Linux kernel, the following vulnerability has been resolved: iavf: fix out-of-bounds writes in iavf_get_ethtool_stats() iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the value could change in runtime, we should use num_tx_queues instead. Moreover iavf_get_ethtool_stats() uses num_active_queues while iavf_get_sset_count() and iavf_get_stat_strings() use real_num_tx_queues, which triggers out-of-bounds writes when we do "ethtool -L" and "ethtool -S" simultaneously [1]. For example when we change channels from 1 to 8, Thread 3 could be scheduled before Thread 2, and out-of-bounds writes could be triggered in Thread 3: Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S) iavf_set_channels() ... iavf_alloc_queues() -> num_active_queues = 8 iavf_schedule_finish_config() iavf_get_sset_count() real_num_tx_queues: 1 -> buffer for 1 queue iavf_get_ethtool_stats() num_active_queues: 8 -> out-of-bounds! iavf_finish_config() -> real_num_tx_queues = 8 Use immutable num_tx_queues in all related functions to avoid the issue. [1] BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270 Write of size 8 at addr ffffc900031c9080 by task ethtool/5800 CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_report+0x170/0x4f3 kasan_report+0xe1/0x180 iavf_add_one_ethtool_stat+0x200/0x270 iavf_get_ethtool_stats+0x14c/0x2e0 __dev_ethtool+0x3d0c/0x5830 dev_ethtool+0x12d/0x270 dev_ioctl+0x53c/0xe30 sock_do_ioctl+0x1a9/0x270 sock_ioctl+0x3d4/0x5e0 __x64_sys_ioctl+0x137/0x1c0 do_syscall_64+0xf3/0x690 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7da0e6e36d ... </TASK> The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88813a013de0 pfn:0x13a013 flags: 0x200000000000000(node=0|zone=2) raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN The BPF interpreter's signed 32-bit division and modulo handlers use the kernel abs() macro on s32 operands. The abs() macro documentation (include/linux/math.h) explicitly states the result is undefined when the input is the type minimum. When DST contains S32_MIN (0x80000000), abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged on arm64/x86. This value is then sign-extended to u64 as 0xFFFFFFFF80000000, causing do_div() to compute the wrong result. The verifier's abstract interpretation (scalar32_min_max_sdiv) computes the mathematically correct result for range tracking, creating a verifier/interpreter mismatch that can be exploited for out-of-bounds map value access. Introduce abs_s32() which handles S32_MIN correctly by casting to u32 before negating, avoiding signed overflow entirely. Replace all 8 abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers. s32 is the only affected case -- the s64 division/modulo handlers do not use abs().

In the Linux kernel, the following vulnerability has been resolved: net: fix fanout UAF in packet_release() via NETDEV_UP race `packet_release()` has a race window where `NETDEV_UP` can re-register a socket into a fanout group's `arr[]` array. The re-registration is not cleaned up by `fanout_release()`, leaving a dangling pointer in the fanout array. `packet_release()` does NOT zero `po->num` in its `bind_lock` section. After releasing `bind_lock`, `po->num` is still non-zero and `po->ifindex` still matches the bound device. A concurrent `packet_notifier(NETDEV_UP)` that already found the socket in `sklist` can re-register the hook. For fanout sockets, this re-registration calls `__fanout_link(sk, po)` which adds the socket back into `f->arr[]` and increments `f->num_members`, but does NOT increment `f->sk_ref`. The fix sets `po->num` to zero in `packet_release` while `bind_lock` is held to prevent NETDEV_UP from linking, preventing the race window. This bug was found following an additional audit with Claude Code based on CVE-2025-38617.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: Avoid releasing netdev before teardown completes The patch cited in the Fixes tag below changed the teardown code for OVS ports to no longer unconditionally take the RTNL. After this change, the netdev_destroy() callback can proceed immediately to the call_rcu() invocation if the IFF_OVS_DATAPATH flag is already cleared on the netdev. The ovs_netdev_detach_dev() function clears the flag before completing the unregistration, and if it gets preempted after clearing the flag (as can happen on an -rt kernel), netdev_destroy() can complete and the device can be freed before the unregistration completes. This leads to a splat like: [ 998.393867] Oops: general protection fault, probably for non-canonical address 0xff00000001000239: 0000 [#1] SMP PTI [ 998.393877] CPU: 42 UID: 0 PID: 55177 Comm: ip Kdump: loaded Not tainted 6.12.0-211.1.1.el10_2.x86_64+rt #1 PREEMPT_RT [ 998.393886] Hardware name: Dell Inc. PowerEdge R740/0JMK61, BIOS 2.24.0 03/27/2025 [ 998.393889] RIP: 0010:dev_set_promiscuity+0x8d/0xa0 [ 998.393901] Code: 00 00 75 d8 48 8b 53 08 48 83 ba b0 02 00 00 00 75 ca 48 83 c4 08 5b c3 cc cc cc cc 48 83 bf 48 09 00 00 00 75 91 48 8b 47 08 <48> 83 b8 b0 02 00 00 00 74 97 eb 81 0f 1f 80 00 00 00 00 90 90 90 [ 998.393906] RSP: 0018:ffffce5864a5f6a0 EFLAGS: 00010246 [ 998.393912] RAX: ff00000000ffff89 RBX: ffff894d0adf5a05 RCX: 0000000000000000 [ 998.393917] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff894d0adf5a05 [ 998.393921] RBP: ffff894d19252000 R08: ffff894d19252000 R09: 0000000000000000 [ 998.393924] R10: ffff894d19252000 R11: ffff894d192521b8 R12: 0000000000000006 [ 998.393927] R13: ffffce5864a5f738 R14: 00000000ffffffe2 R15: 0000000000000000 [ 998.393931] FS: 00007fad61971800(0000) GS:ffff894cc0140000(0000) knlGS:0000000000000000 [ 998.393936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 998.393940] CR2: 000055df0a2a6e40 CR3: 000000011c7fe003 CR4: 00000000007726f0 [ 998.393944] PKRU: 55555554 [ 998.393946] Call Trace: [ 998.393949] <TASK> [ 998.393952] ? show_trace_log_lvl+0x1b0/0x2f0 [ 998.393961] ? show_trace_log_lvl+0x1b0/0x2f0 [ 998.393975] ? dp_device_event+0x41/0x80 [openvswitch] [ 998.394009] ? __die_body.cold+0x8/0x12 [ 998.394016] ? die_addr+0x3c/0x60 [ 998.394027] ? exc_general_protection+0x16d/0x390 [ 998.394042] ? asm_exc_general_protection+0x26/0x30 [ 998.394058] ? dev_set_promiscuity+0x8d/0xa0 [ 998.394066] ? ovs_netdev_detach_dev+0x3a/0x80 [openvswitch] [ 998.394092] dp_device_event+0x41/0x80 [openvswitch] [ 998.394102] notifier_call_chain+0x5a/0xd0 [ 998.394106] unregister_netdevice_many_notify+0x51b/0xa60 [ 998.394110] rtnl_dellink+0x169/0x3e0 [ 998.394121] ? rt_mutex_slowlock.constprop.0+0x95/0xd0 [ 998.394125] rtnetlink_rcv_msg+0x142/0x3f0 [ 998.394128] ? avc_has_perm_noaudit+0x69/0xf0 [ 998.394130] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 998.394132] netlink_rcv_skb+0x50/0x100 [ 998.394138] netlink_unicast+0x292/0x3f0 [ 998.394141] netlink_sendmsg+0x21b/0x470 [ 998.394145] ____sys_sendmsg+0x39d/0x3d0 [ 998.394149] ___sys_sendmsg+0x9a/0xe0 [ 998.394156] __sys_sendmsg+0x7a/0xd0 [ 998.394160] do_syscall_64+0x7f/0x170 [ 998.394162] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 998.394165] RIP: 0033:0x7fad61bf4724 [ 998.394188] Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d c5 e9 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89 [ 998.394189] RSP: 002b:00007ffd7e2f7cb8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e [ 998.394191] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fad61bf4724 [ 998.394193] RDX: 0000000000000000 RSI: 00007ffd7e2f7d20 RDI: 0000000000000003 [ 998.394194] RBP: 00007ffd7e2f7d90 R08: 0000000000000010 R09: 000000000000003f [ 998.394195] R10: 000055df11558010 R11: 0000000000000202 R12: 00007ffd7e2 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: btrfs: unset reloc control if transaction commit fails in prepare_to_relocate() In btrfs_relocate_block_group(), the rc is allocated. Then btrfs_relocate_block_group() calls relocate_block_group() prepare_to_relocate() set_reloc_control() that assigns rc to the variable fs_info->reloc_ctl. When prepare_to_relocate() returns, it calls btrfs_commit_transaction() btrfs_start_dirty_block_groups() btrfs_alloc_path() kmem_cache_zalloc() which may fail for example (or other errors could happen). When the failure occurs, btrfs_relocate_block_group() detects the error and frees rc and doesn't set fs_info->reloc_ctl to NULL. After that, in btrfs_init_reloc_root(), rc is retrieved from fs_info->reloc_ctl and then used, which may cause a use-after-free bug. This possible bug can be triggered by calling btrfs_ioctl_balance() before calling btrfs_ioctl_defrag(). To fix this possible bug, in prepare_to_relocate(), check if btrfs_commit_transaction() fails. If the failure occurs, unset_reloc_control() is called to set fs_info->reloc_ctl to NULL. The error log in our fault-injection testing is shown as follows: [ 58.751070] BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x7ca/0x920 [btrfs] ... [ 58.753577] Call Trace: ... [ 58.755800] kasan_report+0x45/0x60 [ 58.756066] btrfs_init_reloc_root+0x7ca/0x920 [btrfs] [ 58.757304] record_root_in_trans+0x792/0xa10 [btrfs] [ 58.757748] btrfs_record_root_in_trans+0x463/0x4f0 [btrfs] [ 58.758231] start_transaction+0x896/0x2950 [btrfs] [ 58.758661] btrfs_defrag_root+0x250/0xc00 [btrfs] [ 58.759083] btrfs_ioctl_defrag+0x467/0xa00 [btrfs] [ 58.759513] btrfs_ioctl+0x3c95/0x114e0 [btrfs] ... [ 58.768510] Allocated by task 23683: [ 58.768777] ____kasan_kmalloc+0xb5/0xf0 [ 58.769069] __kmalloc+0x227/0x3d0 [ 58.769325] alloc_reloc_control+0x10a/0x3d0 [btrfs] [ 58.769755] btrfs_relocate_block_group+0x7aa/0x1e20 [btrfs] [ 58.770228] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.770655] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.771071] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.771472] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.771902] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ... [ 58.773337] Freed by task 23683: ... [ 58.774815] kfree+0xda/0x2b0 [ 58.775038] free_reloc_control+0x1d6/0x220 [btrfs] [ 58.775465] btrfs_relocate_block_group+0x115c/0x1e20 [btrfs] [ 58.775944] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.776369] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.776784] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.777185] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.777621] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ...

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix mbss changed flags corruption on 32 bit systems On 32-bit systems, the size of an unsigned long is 4 bytes, while a u64 is 8 bytes. Therefore, when using or_each_set_bit(bit, &bits, sizeof(changed) * BITS_PER_BYTE), the code is incorrectly searching for a bit in a 32-bit variable that is expected to be 64 bits in size, leading to incorrect bit finding. Solution: Ensure that the size of the bits variable is correctly adjusted for each architecture. Call Trace: ? show_regs+0x54/0x58 ? __warn+0x6b/0xd4 ? ieee80211_link_info_change_notify+0xcc/0xd4 [mac80211] ? report_bug+0x113/0x150 ? exc_overflow+0x30/0x30 ? handle_bug+0x27/0x44 ? exc_invalid_op+0x18/0x50 ? handle_exception+0xf6/0xf6 ? exc_overflow+0x30/0x30 ? ieee80211_link_info_change_notify+0xcc/0xd4 [mac80211] ? exc_overflow+0x30/0x30 ? ieee80211_link_info_change_notify+0xcc/0xd4 [mac80211] ? ieee80211_mesh_work+0xff/0x260 [mac80211] ? cfg80211_wiphy_work+0x72/0x98 [cfg80211] ? process_one_work+0xf1/0x1fc ? worker_thread+0x2c0/0x3b4 ? kthread+0xc7/0xf0 ? mod_delayed_work_on+0x4c/0x4c ? kthread_complete_and_exit+0x14/0x14 ? ret_from_fork+0x24/0x38 ? kthread_complete_and_exit+0x14/0x14 ? ret_from_fork_asm+0xf/0x14 ? entry_INT80_32+0xf0/0xf0 [restore no-op path for no changes]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete This fixes the condition checking so mgmt_pending_valid is executed whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd) would kfree(cmd) without unlinking it from the list first, leaving a dangling pointer. Any subsequent list traversal (e.g., mgmt_pending_foreach during __mgmt_power_off, or another mgmt_pending_valid call) would dereference freed memory.

In the Linux kernel, the following vulnerability has been resolved: drm: adv7511: Fix use-after-free in adv7533_attach_dsi() The host_node pointer was assigned and freed in adv7533_parse_dt(), and later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put() in error path of probe() and also in the remove().

In the Linux kernel, the following vulnerability has been resolved: spi: spi-fsl-lpspi: fix teardown order issue (UAF) There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove().

In the Linux kernel, the following vulnerability has been resolved: drm/dp_mst: Ensure mst_primary pointer is valid in drm_dp_mst_handle_up_req() While receiving an MST up request message from one thread in drm_dp_mst_handle_up_req(), the MST topology could be removed from another thread via drm_dp_mst_topology_mgr_set_mst(false), freeing mst_primary and setting drm_dp_mst_topology_mgr::mst_primary to NULL. This could lead to a NULL deref/use-after-free of mst_primary in drm_dp_mst_handle_up_req(). Avoid the above by holding a reference for mst_primary in drm_dp_mst_handle_up_req() while it's used. v2: Fix kfreeing the request if getting an mst_primary reference fails.

Guest triggered use-after-free in Linux xen-netback A malicious or buggy network PV frontend can force Linux netback to disable the interface and terminate the receive kernel thread associated with queue 0 in response to the frontend sending a malformed packet. Such kernel thread termination will lead to a use-after-free in Linux netback when the backend is destroyed, as the kernel thread associated with queue 0 will have already exited and thus the call to kthread_stop will be performed against a stale pointer.

In the Linux kernel, the following vulnerability has been resolved: cdx: Fix possible UAF error in driver_override_show() Fixed a possible UAF problem in driver_override_show() in drivers/cdx/cdx.c This function driver_override_show() is part of DEVICE_ATTR_RW, which includes both driver_override_show() and driver_override_store(). These functions can be executed concurrently in sysfs. The driver_override_store() function uses driver_set_override() to update the driver_override value, and driver_set_override() internally locks the device (device_lock(dev)). If driver_override_show() reads cdx_dev->driver_override without locking, it could potentially access a freed pointer if driver_override_store() frees the string concurrently. This could lead to printing a kernel address, which is a security risk since DEVICE_ATTR can be read by all users. Additionally, a similar pattern is used in drivers/amba/bus.c, as well as many other bus drivers, where device_lock() is taken in the show function, and it has been working without issues. This potential bug was detected by our experimental static analysis tool, which analyzes locking APIs and paired functions to identify data races and atomicity violations.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: Don't free command immediately Don't prematurely free the command. Wait for the status completion of the sense status. It can be freed then. Otherwise we will double-free the command.

In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix double free of WoL irq We do not need to free wol_irq since it was instantiated with devm_request_irq(). So devres will free for us.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix off by one in mt7925_load_clc() This comparison should be >= instead of > to prevent an out of bounds read and write.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix trace_marker copy link list updates When the "copy_trace_marker" option is enabled for an instance, anything written into /sys/kernel/tracing/trace_marker is also copied into that instances buffer. When the option is set, that instance's trace_array descriptor is added to the marker_copies link list. This list is protected by RCU, as all iterations uses an RCU protected list traversal. When the instance is deleted, all the flags that were enabled are cleared. This also clears the copy_trace_marker flag and removes the trace_array descriptor from the list. The issue is after the flags are called, a direct call to update_marker_trace() is performed to clear the flag. This function returns true if the state of the flag changed and false otherwise. If it returns true here, synchronize_rcu() is called to make sure all readers see that its removed from the list. But since the flag was already cleared, the state does not change and the synchronization is never called, leaving a possible UAF bug. Move the clearing of all flags below the updating of the copy_trace_marker option which then makes sure the synchronization is performed. Also use the flag for checking the state in update_marker_trace() instead of looking at if the list is empty.

BPF JIT compilers in the Linux kernel through 5.11.12 have incorrect computation of branch displacements, allowing them to execute arbitrary code within the kernel context. This affects arch/x86/net/bpf_jit_comp.c and arch/x86/net/bpf_jit_comp32.c.

A flaw was found in the KVM's AMD code for supporting SVM nested virtualization. The flaw occurs when processing the VMCB (virtual machine control block) provided by the L1 guest to spawn/handle a nested guest (L2). Due to improper validation of the "virt_ext" field, this issue could allow a malicious L1 to disable both VMLOAD/VMSAVE intercepts and VLS (Virtual VMLOAD/VMSAVE) for the L2 guest. As a result, the L2 guest would be allowed to read/write physical pages of the host, resulting in a crash of the entire system, leak of sensitive data or potential guest-to-host escape.

In the Linux kernel, the following vulnerability has been resolved: drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error Ensure index in rtl2832_pid_filter does not exceed 31 to prevent out-of-bounds access. dev->filters is a 32-bit value, so set_bit and clear_bit functions should only operate on indices from 0 to 31. If index is 32, it will attempt to access a non-existent 33rd bit, leading to out-of-bounds access. Change the boundary check from index > 32 to index >= 32 to resolve this issue. [hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg]