Buffer overflow in the CA-driver (dst_ca.c) for TwinHan DST Frontend/Card in Linux kernel 2.6.12 and other versions before 2.6.15 allows local users to cause a denial of service (crash) and possibly execute arbitrary code by "reading more than 8 bytes into an 8 byte long array".
An out-of-bounds write flaw was found in the UAS (USB Attached SCSI) device emulation of QEMU in versions prior to 6.2.0-rc0. The device uses the guest supplied stream number unchecked, which can lead to out-of-bounds access to the UASDevice->data3 and UASDevice->status3 fields. A malicious guest user could use this flaw to crash QEMU or potentially achieve code execution with the privileges of the QEMU process on the host.
The VT implementation (vt_ioctl.c) in Linux kernel 2.6.12, and possibly other versions including 2.6.14.4, allows local users to use the KDSKBSENT ioctl on terminals of other users and gain privileges, as demonstrated by modifying key bindings using loadkeys.
The sysctl functionality (sysctl.c) in Linux kernel before 2.6.14.1 allows local users to cause a denial of service (kernel oops) and possibly execute code by opening an interface file in /proc/sys/net/ipv4/conf/, waiting until the interface is unregistered, then obtaining and modifying function pointers in memory that was used for the ctl_table.
Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is Prior to 6.1.28. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. Note: This vulnerability does not apply to Windows systems. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H).
An out-of-bounds write vulnerability was found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. The flaw occurs while processing the 'VIRTIO_GPU_CMD_GET_CAPSET' command from the guest. It could allow a privileged guest user to crash the QEMU process on the host, resulting in a denial of service condition, or potential code execution with the privileges of the QEMU process.
apt-setup in Debian GNU/Linux installs the apt.conf file with insecure permissions, which allows local users to obtain sensitive information such as passwords.
Stack-based buffer overflow in the sendmsg function call in the Linux kernel 2.6 before 2.6.13.1 allows local users to execute arbitrary code by calling sendmsg and modifying the message contents in another thread.
The patch for CVE-2020-17380/CVE-2020-25085 was found to be ineffective, thus making QEMU vulnerable to the out-of-bounds read/write access issues previously found in the SDHCI controller emulation code. This flaw allows a malicious privileged guest to crash the QEMU process on the host, resulting in a denial of service or potential code execution. QEMU up to (including) 5.2.0 is affected by this.
A flaw was found in the Linux kernel in versions prior to 5.10. A violation of memory access was found while detecting a padding of int3 in the linking state. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.
In the Linux kernel before 5.12.4, net/bluetooth/hci_event.c has a use-after-free when destroying an hci_chan, aka CID-5c4c8c954409. This leads to writing an arbitrary value.
Buffer overflow in queue.c in a support script for sympa 3.3.3, when running setuid, allows local users to execute arbitrary code.
The mysqlaccess script in MySQL 4.0.23 and earlier, 4.1.x before 4.1.10, 5.0.x before 5.0.3, and other versions including 3.x, allows local users to overwrite arbitrary files or read temporary files via a symlink attack on temporary files.
The KDE screen saver in KDE before 3.0.5 does not properly check the return value from a certain function call, which allows attackers with physical access to cause a crash and access the desktop session.
Buffer overflow in the MoxaDriverIoctl function for the moxa serial driver (moxa.c) in Linux 2.2.x, 2.4.x, and 2.6.x before 2.6.22 allows local users to execute arbitrary code via a certain modified length value.
The tpkg-* scripts in the toolchain-source 3.0.4 package on Debian GNU/Linux 3.0 allow local users to overwrite arbitrary files via a symlink attack on temporary files.
IOMMU page mapping issues on x86 T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Both AMD and Intel allow ACPI tables to specify regions of memory which should be left untranslated, which typically means these addresses should pass the translation phase unaltered. While these are typically device specific ACPI properties, they can also be specified to apply to a range of devices, or even all devices. On all systems with such regions Xen failed to prevent guests from undoing/replacing such mappings (CVE-2021-28694). On AMD systems, where a discontinuous range is specified by firmware, the supposedly-excluded middle range will also be identity-mapped (CVE-2021-28695). Further, on AMD systems, upon de-assigment of a physical device from a guest, the identity mappings would be left in place, allowing a guest continued access to ranges of memory which it shouldn't have access to anymore (CVE-2021-28696).
An issue was discovered in the Linux kernel through 5.11.8. The sound/soc/qcom/sdm845.c soundwire device driver has a buffer overflow when an unexpected port ID number is encountered, aka CID-1c668e1c0a0f. (This has been fixed in 5.12-rc4.)
IOMMU page mapping issues on x86 T[his CNA information record relates to multiple CVEs; the text explains which aspects/vulnerabilities correspond to which CVE.] Both AMD and Intel allow ACPI tables to specify regions of memory which should be left untranslated, which typically means these addresses should pass the translation phase unaltered. While these are typically device specific ACPI properties, they can also be specified to apply to a range of devices, or even all devices. On all systems with such regions Xen failed to prevent guests from undoing/replacing such mappings (CVE-2021-28694). On AMD systems, where a discontinuous range is specified by firmware, the supposedly-excluded middle range will also be identity-mapped (CVE-2021-28695). Further, on AMD systems, upon de-assigment of a physical device from a guest, the identity mappings would be left in place, allowing a guest continued access to ranges of memory which it shouldn't have access to anymore (CVE-2021-28696).
Guest triggered use-after-free in Linux xen-netback A malicious or buggy network PV frontend can force Linux netback to disable the interface and terminate the receive kernel thread associated with queue 0 in response to the frontend sending a malformed packet. Such kernel thread termination will lead to a use-after-free in Linux netback when the backend is destroyed, as the kernel thread associated with queue 0 will have already exited and thus the call to kthread_stop will be performed against a stale pointer.
xscreensaver before 5.14 crashes during activation and leaves the screen unlocked when in Blank Only Mode and when DPMS is disabled, which allows local attackers to access resources without authentication.
Double free vulnerability in the krb5_rd_cred function for MIT Kerberos 5 (krb5) 1.3.1 and earlier may allow local users to execute arbitrary code.
mount in util-linux 2.19 and earlier does not remove the /etc/mtab~ lock file after a failed attempt to add a mount entry, which has unspecified impact and local attack vectors.
Unspecified vulnerability in the ptrace MIPS assembly code in Linux kernel 2.4 before 2.4.17 allows local users to gain privileges via unknown vectors.
PackageKit 0.6.17 allows installation of unsigned RPM packages as though they were signed which may allow installation of non-trusted packages and execution of arbitrary code.
Unknown vulnerability in the passwd_check function in Shadow 4.0.4.1, and possibly other versions before 4.0.5, allows local users to conduct unauthorized activities when an error from a pam_chauthtok function call is not properly handled.
KDE before 3.3.0 does not properly handle when certain symbolic links point to "stale" locations, which could allow local users to create or truncate arbitrary files.
Certain USB drivers in the Linux 2.4 kernel use the copy_to_user function on uninitialized structures, which could allow local users to obtain sensitive information by reading memory that was not cleared from previous usage.
The framebuffer driver in Linux kernel 2.6.x does not properly use the fb_copy_cmap function, with unknown impact.
An issue was discovered in the Linux kernel 4.18 through 5.10.16, as used by Xen. The backend allocation (aka be-alloc) mode of the drm_xen_front drivers was not meant to be a supported configuration, but this wasn't stated accordingly in its support status entry.
The proc filesystem implementation in the Linux kernel 2.6.37 and earlier does not restrict access to the /proc directory tree of a process after this process performs an exec of a setuid program, which allows local users to obtain sensitive information or cause a denial of service via open, lseek, read, and write system calls.
Unknown vulnerability in Linux kernel before 2.4.22 allows local users to gain privileges, related to "R128 DRI limits checking."
Real time clock (RTC) routines in Linux kernel 2.4.23 and earlier do not properly initialize their structures, which could leak kernel data to user space.
The SQLDriverConnect() function in unixODBC before 2.2.14p2 have a possible buffer overflow condition when specifying a large value for SAVEFILE parameter in the connection string.
Buffer overflow in the ISO9660 file system component for Linux kernel 2.4.x, 2.5.x and 2.6.x, allows local users with physical access to overflow kernel memory and execute arbitrary code via a malformed CD containing a long symbolic link entry.
An issue was discovered in the Linux kernel through 5.11.3. Certain iSCSI data structures do not have appropriate length constraints or checks, and can exceed the PAGE_SIZE value. An unprivileged user can send a Netlink message that is associated with iSCSI, and has a length up to the maximum length of a Netlink message.
In the Linux kernel before 5.2.9, there is a use-after-free bug that can be caused by a malicious USB device in the drivers/usb/misc/yurex.c driver, aka CID-fc05481b2fca.
avahi-daemon-check-dns.sh in the Debian avahi package through 0.8-4 is executed as root via /etc/network/if-up.d/avahi-daemon, and allows a local attacker to cause a denial of service or create arbitrary empty files via a symlink attack on files under /run/avahi-daemon. NOTE: this only affects the packaging for Debian GNU/Linux (used indirectly by SUSE), not the upstream Avahi product.
In the Linux kernel before 2.6.34, a range check issue in drivers/gpu/drm/radeon/atombios.c could cause an off by one (buffer overflow) problem. NOTE: At least one Linux maintainer believes that this CVE is incorrectly assigned and should be rejected because the value is hard coded and are not user-controllable where it is used
Buffer overflow in (1) nethack 3.4.0 and earlier, and (2) falconseye 1.9.3 and earlier, which is based on nethack, allows local users to gain privileges via a long -s command line option.
In the Linux kernel before 2.6.37, an out of bounds array access happened in drivers/net/mlx4/port.c. When searching for a free entry in either mlx4_register_vlan() or mlx4_register_mac(), and there is no free entry, the loop terminates without updating the local variable free thus causing out of array bounds access.
run-mailcap in mime-support 3.22 and earlier allows local users to overwrite arbitrary files via a symlink attack on temporary files.
udisks before 1.0.3 allows a local user to load arbitrary Linux kernel modules.
The (1) semi MIME library 1.14.5 and earlier, and (2) wemi 1.14.0 and possibly other versions, allows local users to overwrite arbitrary files via a symlink attack on temporary files.
Buffer overflow in man and mandb (man-db) 2.4.3 and earlier allows local users to execute arbitrary code via crafted arguments to the -H flag.
Buffer overflow in the ixj telephony card driver in Linux before 2.4.20 has unknown impact and attack vectors.
In X.Org Server (aka xserver and xorg-server) before 1.19.4, a local attacker authenticated to the X server could overflow a global buffer, causing crashes of the X server or potentially other problems by injecting large or malformed XKB related atoms and accessing them via xkbcomp.
The DNS resolution functionality in the CIFS implementation in the Linux kernel before 2.6.35, when CONFIG_CIFS_DFS_UPCALL is enabled, relies on a user's keyring for the dns_resolver upcall in the cifs.upcall userspace helper, which allows local users to spoof the results of DNS queries and perform arbitrary CIFS mounts via vectors involving an add_key call, related to a "cache stuffing" issue and MS-DFS referrals.
The do_gfs2_set_flags function in fs/gfs2/file.c in the Linux kernel before 2.6.34-git10 does not verify the ownership of a file, which allows local users to bypass intended access restrictions via a SETFLAGS ioctl request.
The btrfs_xattr_set_acl function in fs/btrfs/acl.c in btrfs in the Linux kernel 2.6.34 and earlier does not check file ownership before setting an ACL, which allows local users to bypass file permissions by setting arbitrary ACLs, as demonstrated using setfacl.