The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices allows remote attackers to execute arbitrary code via a specific (but unstated) exposed service. NOTE: the scope of this CVE does NOT include the concept of "Unnecessary Services" in general; the scope is only a single service that is unnecessarily exposed, leading to remote code execution. The details of that service might be disclosed at a later date.

Cisco 12000 with IOS 12.0 and lines card based on Engine 2 does not properly handle an outbound ACL when an input ACL is not configured on all the interfaces of a multi port line card, which could allow remote attackers to bypass the intended access controls.

Various Intrusion Detection Systems (IDS) including (1) Cisco Secure Intrusion Detection System, (2) Cisco Catalyst 6000 Intrusion Detection System Module, (3) Dragon Sensor 4.x, (4) Snort before 1.8.1, (5) ISS RealSecure Network Sensor 5.x and 6.x before XPU 3.2, and (6) ISS RealSecure Server Sensor 5.5 and 6.0 for Windows, allow remote attackers to evade detection of HTTP attacks via non-standard "%u" Unicode encoding of ASCII characters in the requested URL.

Stack-based buffer overflow in the CSAdmin service in Cisco Secure Access Control Server (ACS) for Windows before 4.1 and ACS Solution Engine before 4.1 allows remote attackers to execute arbitrary code via a crafted HTTP GET request.

A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995.

A vulnerability in the symbolic link (symlink) creation functionality of the AutoVNF tool for the Cisco Ultra Services Framework could allow an unauthenticated, remote attacker to read sensitive files or execute malicious code on an affected system. The vulnerability is due to the absence of validation checks for the input that is used to create symbolic links. This vulnerability affects all releases of the Cisco Ultra Services Framework prior to Releases 5.0.3 and 5.1. Cisco Bug IDs: CSCvc76654.

A default configuration of CiscoSecure Access Control Server (ACS) allows remote users to modify the server database without authentication.

Cisco NAC allows quarantined devices to communicate over the network with (1) DNS, (2) DHCP, and (3) EAPoUDP, which allows attackers to bypass control methods by tunneling network traffic through one of these protocols.

SQL injection vulnerability in Cisco Unified Communications Manager (CUCM) 7.1(x) through 9.1(1a) allows remote attackers to execute arbitrary SQL commands via unspecified vectors, leading to discovery of encrypted credentials by leveraging metadata, aka Bug ID CSCuh01051.

Heap-based buffer overflow in the VLAN Trunking Protocol (VTP) feature in Cisco IOS 12.1(19) allows remote attackers to execute arbitrary code via a long VLAN name in a VTP type 2 summary advertisement.

Cisco Wireless Control System (WCS) for Linux and Windows 4.0(1) and earlier uses a default administrator username "root" and password "public," which allows remote attackers to gain access (aka bug CSCse21391).

The default configuration of IOS HTTP server in Cisco Router Web Setup (CRWS) before 3.3.0 build 31 does not require credentials, which allows remote attackers to access the server with arbitrary privilege levels, aka bug CSCsa78190.

Cisco Secure Access Control Server (ACS) 4.x for Windows uses the client's IP address and the server's port number to grant access to an HTTP server port for an administration session, which allows remote attackers to bypass authentication via various methods, aka "ACS Weak Session Management Vulnerability."

The internal database in Cisco Wireless Control System (WCS) for Linux and Windows before 3.2(63) stores a hard-coded username and password in plaintext within unspecified files, which allows remote authenticated users to access the database (aka bug CSCsd15951).

Cisco CiscoWorks Wireless LAN Solution Engine (WLSE) and WLSE Express before 2.13, Hosting Solution Engine (HSE) and User Registration Tool (URT) before 20060419, and all versions of Ethernet Subscriber Solution Engine (ESSE) and CiscoWorks2000 Service Management Solution (SMS) allow local users to gain Linux shell access via shell metacharacters in arguments to the "show" command in the application's command line interface (CLI), aka bug ID CSCsd21502 (WLSE), CSCsd22861 (URT), and CSCsd22859 (HSE). NOTE: other issues might be addressed by the Cisco advisory.

The installation of Cisco Transport Controller (CTC) for Cisco Optical Networking System (ONS) 15000 series nodes adds a Java policy file entry with a wildcard that grants the java.security.AllPermission permission to any http URL containing "fs/LAUNCHER.jar", which allows remote attackers to execute arbitrary code on a CTC workstation, aka bug ID CSCea25049.

Cisco PIX/ASA 7.1.x before 7.1(2) and 7.0.x before 7.0(5), PIX 6.3.x before 6.3.5(112), and FWSM 2.3.x before 2.3(4) and 3.x before 3.1(7), when used with Websense/N2H2, allows remote attackers to bypass HTTP access restrictions by splitting the GET method of an HTTP request into multiple packets, which prevents the request from being sent to Websense for inspection, aka bugs CSCsc67612, CSCsc68472, and CSCsd81734.

The Downloadable RADIUS ACLs feature in Cisco PIX and VPN 3000 concentrators, when creating an ACL on the Cisco Secure Access Control Server (CS ACS), generates a random internal name for an ACL that is also used as a hidden user name and password, which allows remote attackers to gain privileges by sniffing the username from the cleartext portion of a RADIUS session, then using the password to log in to another device that uses CS ACS.

Buffer overflow in Firewall Authentication Proxy for FTP and/or Telnet Sessions for Cisco IOS 12.2ZH and 12.2ZL, 12.3 and 12.3T, and 12.4 and 12.4T allows remote attackers to cause a denial of service and possibly execute arbitrary code via crafted user authentication credentials.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

Cisco switches that support 802.1x security allow remote attackers to bypass port security and gain access to the VLAN via spoofed Cisco Discovery Protocol (CDP) messages.

Cisco IOS 12.2T, 12.3 and 12.3T, when processing an ISAKMP profile that specifies XAUTH authentication after Phase 1 negotiation, may not process certain attributes in the ISAKMP profile that specifies XAUTH, which allows remote attackers to bypass XAUTH and move to Phase 2 negotiations.

Cisco IP/VC Videoconferencing System 3510, 3520, 3525 and 3530 contain hard-coded default SNMP community strings, which allows remote attackers to gain access, cause a denial of service, and modify configuration.

The UPnP IGD implementation in the Broadcom UPnP stack on the Cisco Linksys WRT54G with firmware before 4.30.5, WRT54GS v1 through v3 with firmware before 4.71.1, and WRT54GS v4 with firmware before 1.06.1 allows remote attackers to establish arbitrary port mappings by sending a UPnP AddPortMapping action in a SOAP request to the WAN interface, related to an "external forwarding" vulnerability.

Unknown vulnerability in Cisco Firewall Services Module (FWSM) 2.3.1 and earlier, when using URL, FTP, or HTTPS filtering exceptions, allows certain TCP packets to bypass access control lists (ACLs).

Cisco Secure Access Control Server (ACS) 3.2(3) and earlier spawns a separate unauthenticated TCP connection on a random port when a user authenticates to the ACS GUI, which allows remote attackers to bypass authentication by connecting to that port from the same IP address.

The Transaction Language 1 (TL1) login interface in Cisco ONS 15327 4.6(0) and 4.6(1) and 15454 and 15454 SDH 4.6(0) and 4.6(1), when a user account is configured with a blank password, allows remote attackers to gain unauthorized access by logging in with a password larger than 10 characters.

Cisco Unity 2.x, 3.x, and 4.x, when integrated with Microsoft Exchange, has several hard coded usernames and passwords, which allows remote attackers to gain unauthorized access and change configuration settings or read outgoing or incoming e-mail messages.

Cisco Show and Share 5(2), 5.2(1), and 5.2(2) before 5.2(2.1) allows remote attackers to access the (1) Encoders and Pull Configurations, (2) Push Configurations, (3) Video Encoding Formats, and (4) Transcoding administration pages, and cause a denial of service (live event outage) or obtain potentially sensitive information, via unspecified vectors, aka Bug ID CSCto73758.

Cisco Security Agent Management Center (CSAMC) 5.1 before 5.1.0.79 does not properly handle certain LDAP error messages, which allows remote attackers to bypass authentication requirements via an empty password when using an external LDAP server.

Unspecified vulnerability in Cisco IPS 5.0 before 5.0(6p2) and 5.1 before 5.1(2), when running in inline or promiscuous mode, allows remote attackers to bypass traffic inspection via a "crafted sequence of fragmented IP packets".

The Session Initiation Protocol (SIP) implementation in multiple Cisco products including IP Phone models 7940 and 7960, IOS versions in the 12.2 train, and Secure PIX 5.2.9 to 6.2.2 allows remote attackers to cause a denial of service and possibly execute arbitrary code via crafted INVITE messages, as demonstrated by the OUSPG PROTOS c07-sip test suite.

Multiple vulnerabilities in the H.323 protocol implementation for Cisco IOS 11.3T through 12.2T allow remote attackers to cause a denial of service and possibly execute arbitrary code, as demonstrated by the NISCC/OUSPG PROTOS test suite for the H.225 protocol.

Multiple SQL injection vulnerabilities in Cisco Unified Operations Manager (CUOM) before 8.6 allow remote attackers to execute arbitrary SQL commands via (1) the CCMs parameter to iptm/PRTestCreation.do or (2) the ccm parameter to iptm/TelePresenceReportAction.do, aka Bug ID CSCtn61716.

Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to bypass authentication and invoke arbitrary methods via a malformed SOAP request, aka Bug ID CSCtc59562.

Cisco TelePresence Recording Server devices with software 1.6.x do not require authentication for an XML-RPC interface, which allows remote attackers to perform unspecified actions via a session on TCP port 8080, aka Bug ID CSCtg35833.

Buffer overflow in the HTTP server for Cisco IOS 12.2 and earlier allows remote attackers to execute arbitrary code via an extremely long (2GB) HTTP GET request.

Buffer overflow in Cisco IOS 11.2.x to 12.0.x allows remote attackers to cause a denial of service and possibly execute commands via a large number of OSPF neighbor announcements.

Cisco VPN 3000 series concentrators and Cisco VPN 3002 Hardware Client 3.5.x through 4.0.REL, when enabling IPSec over TCP for a port on the concentrator, allow remote attackers to reach the private network without authentication.

Buffer overflow in the administration service (CSAdmin) for Cisco Secure ACS before 3.1.2 allows remote attackers to cause a denial of service and possibly execute arbitrary code via a long user parameter to port 2002.

Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) permit packets to pass before the configuration has been loaded, which might allow remote attackers to bypass intended access restrictions by sending network traffic during device startup, aka Bug ID CSCsy86769.

Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote attackers to bypass SMTP inspection via vectors involving a prepended space character, aka Bug ID CSCte14901.

Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.3, adds an "HTTPS on Public Inbound (XML-Auto)(forward/in)" rule but sets the protocol to "ANY" when the XML filter configuration is enabled, which ultimately allows arbitrary traffic to pass through the concentrator.

Cisco ONS15454 and ONS15327 running ONS before 3.4 allows remote attackers to modify the system configuration and delete files by establishing an FTP connection to the TCC, TCC+ or XTC using a username and password that does not exist.

Cisco Virtual Private Network (VPN) Client software 2.x.x, and 3.x before 3.5.2B, does not generate sufficiently random numbers, which may make it vulnerable to certain attacks such as spoofing.

Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.1, allows restricted administrators to obtain user passwords that are stored in plaintext in HTML source code.

Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.2, allows restricted administrators to obtain certificate passwords that are stored in plaintext in the HTML source code for Certificate Management pages.

Cisco Unity 2.x and 3.x uses well-known default user accounts, which could allow remote attackers to gain access and place arbitrary calls.

Format string vulnerability in the administration function in Cisco Secure Access Control Server (ACS) for Windows, 2.6.x and earlier and 3.x through 3.01 (build 40), allows remote attackers to crash the CSADMIN module only (denial of service of administration function) or execute arbitrary code via format strings in the URL to port 2002.

The original patch for the Cisco Content Service Switch 11000 Series authentication bypass vulnerability (CVE-2001-0622) was incomplete, which still allows remote attackers to gain additional privileges by directly requesting the web management URL instead of navigating through the interface, possibly via a variant of the original attack, as identified by Cisco bug ID CSCdw08549.