AES OCB mode for 32-bit x86 platforms using the AES-NI assembly optimised implementation will not encrypt the entirety of the data under some circumstances. This could reveal sixteen bytes of data that was preexisting in the memory that wasn't written. In the special case of "in place" encryption, sixteen bytes of the plaintext would be revealed. Since OpenSSL does not support OCB based cipher suites for TLS and DTLS, they are both unaffected. Fixed in OpenSSL 3.0.5 (Affected 3.0.0-3.0.4). Fixed in OpenSSL 1.1.1q (Affected 1.1.1-1.1.1p).

The OpenSSL 3.0 implementation of the RC4-MD5 ciphersuite incorrectly uses the AAD data as the MAC key. This makes the MAC key trivially predictable. An attacker could exploit this issue by performing a man-in-the-middle attack to modify data being sent from one endpoint to an OpenSSL 3.0 recipient such that the modified data would still pass the MAC integrity check. Note that data sent from an OpenSSL 3.0 endpoint to a non-OpenSSL 3.0 endpoint will always be rejected by the recipient and the connection will fail at that point. Many application protocols require data to be sent from the client to the server first. Therefore, in such a case, only an OpenSSL 3.0 server would be impacted when talking to a non-OpenSSL 3.0 client. If both endpoints are OpenSSL 3.0 then the attacker could modify data being sent in both directions. In this case both clients and servers could be affected, regardless of the application protocol. Note that in the absence of an attacker this bug means that an OpenSSL 3.0 endpoint communicating with a non-OpenSSL 3.0 endpoint will fail to complete the handshake when using this ciphersuite. The confidentiality of data is not impacted by this issue, i.e. an attacker cannot decrypt data that has been encrypted using this ciphersuite - they can only modify it. In order for this attack to work both endpoints must legitimately negotiate the RC4-MD5 ciphersuite. This ciphersuite is not compiled by default in OpenSSL 3.0, and is not available within the default provider or the default ciphersuite list. This ciphersuite will never be used if TLSv1.3 has been negotiated. In order for an OpenSSL 3.0 endpoint to use this ciphersuite the following must have occurred: 1) OpenSSL must have been compiled with the (non-default) compile time option enable-weak-ssl-ciphers 2) OpenSSL must have had the legacy provider explicitly loaded (either through application code or via configuration) 3) The ciphersuite must have been explicitly added to the ciphersuite list 4) The libssl security level must have been set to 0 (default is 1) 5) A version of SSL/TLS below TLSv1.3 must have been negotiated 6) Both endpoints must negotiate the RC4-MD5 ciphersuite in preference to any others that both endpoints have in common Fixed in OpenSSL 3.0.3 (Affected 3.0.0,3.0.1,3.0.2).

The Bluetooth BR/EDR specification up to and including version 5.1 permits sufficiently low encryption key length and does not prevent an attacker from influencing the key length negotiation. This allows practical brute-force attacks (aka "KNOB") that can decrypt traffic and inject arbitrary ciphertext without the victim noticing.

python-apt only checks the MD5 sums of downloaded files in `Version.fetch_binary()` and `Version.fetch_source()` of apt/package.py in version 1.9.0ubuntu1 and earlier. This allows a man-in-the-middle attack which could potentially be used to install altered packages and has been fixed in versions 1.9.0ubuntu1.2, 1.6.5ubuntu0.1, 1.1.0~beta1ubuntu0.16.04.7, 0.9.3.5ubuntu3+esm2, and 0.8.3ubuntu7.5.

In situations where an attacker receives automated notification of the success or failure of a decryption attempt an attacker, after sending a very large number of messages to be decrypted, can recover a CMS/PKCS7 transported encryption key or decrypt any RSA encrypted message that was encrypted with the public RSA key, using a Bleichenbacher padding oracle attack. Applications are not affected if they use a certificate together with the private RSA key to the CMS_decrypt or PKCS7_decrypt functions to select the correct recipient info to decrypt. Fixed in OpenSSL 1.1.1d (Affected 1.1.1-1.1.1c). Fixed in OpenSSL 1.1.0l (Affected 1.1.0-1.1.0k). Fixed in OpenSSL 1.0.2t (Affected 1.0.2-1.0.2s).

ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for every encryption operation. RFC 7539 specifies that the nonce value (IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and front pads the nonce with 0 bytes if it is less than 12 bytes. However it also incorrectly allows a nonce to be set of up to 16 bytes. In this case only the last 12 bytes are significant and any additional leading bytes are ignored. It is a requirement of using this cipher that nonce values are unique. Messages encrypted using a reused nonce value are susceptible to serious confidentiality and integrity attacks. If an application changes the default nonce length to be longer than 12 bytes and then makes a change to the leading bytes of the nonce expecting the new value to be a new unique nonce then such an application could inadvertently encrypt messages with a reused nonce. Additionally the ignored bytes in a long nonce are not covered by the integrity guarantee of this cipher. Any application that relies on the integrity of these ignored leading bytes of a long nonce may be further affected. Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe because no such use sets such a long nonce value. However user applications that use this cipher directly and set a non-default nonce length to be longer than 12 bytes may be vulnerable. OpenSSL versions 1.1.1 and 1.1.0 are affected by this issue. Due to the limited scope of affected deployments this has been assessed as low severity and therefore we are not creating new releases at this time. Fixed in OpenSSL 1.1.1c (Affected 1.1.1-1.1.1b). Fixed in OpenSSL 1.1.0k (Affected 1.1.0-1.1.0j).

WebExtensions with the appropriate permissions can attach content scripts to Mozilla sites such as accounts.firefox.com and listen to network traffic to the site through the "webRequest" API. For example, this allows for the interception of username and an encrypted password during login to Firefox Accounts. This issue does not expose synchronization traffic directly and is limited to the process of user login to the website and the data displayed to the user once logged in. This vulnerability affects Firefox < 60.

The OpenSSL RSA Key generation algorithm has been shown to be vulnerable to a cache timing side channel attack. An attacker with sufficient access to mount cache timing attacks during the RSA key generation process could recover the private key. Fixed in OpenSSL 1.1.0i-dev (Affected 1.1.0-1.1.0h). Fixed in OpenSSL 1.0.2p-dev (Affected 1.0.2b-1.0.2o).

OpenSSL 1.0.2 supports SSLv2. If a client attempts to negotiate SSLv2 with a server that is configured to support both SSLv2 and more recent SSL and TLS versions then a check is made for a version rollback attack when unpadding an RSA signature. Clients that support SSL or TLS versions greater than SSLv2 are supposed to use a special form of padding. A server that supports greater than SSLv2 is supposed to reject connection attempts from a client where this special form of padding is present, because this indicates that a version rollback has occurred (i.e. both client and server support greater than SSLv2, and yet this is the version that is being requested). The implementation of this padding check inverted the logic so that the connection attempt is accepted if the padding is present, and rejected if it is absent. This means that such as server will accept a connection if a version rollback attack has occurred. Further the server will erroneously reject a connection if a normal SSLv2 connection attempt is made. Only OpenSSL 1.0.2 servers from version 1.0.2s to 1.0.2x are affected by this issue. In order to be vulnerable a 1.0.2 server must: 1) have configured SSLv2 support at compile time (this is off by default), 2) have configured SSLv2 support at runtime (this is off by default), 3) have configured SSLv2 ciphersuites (these are not in the default ciphersuite list) OpenSSL 1.1.1 does not have SSLv2 support and therefore is not vulnerable to this issue. The underlying error is in the implementation of the RSA_padding_check_SSLv23() function. This also affects the RSA_SSLV23_PADDING padding mode used by various other functions. Although 1.1.1 does not support SSLv2 the RSA_padding_check_SSLv23() function still exists, as does the RSA_SSLV23_PADDING padding mode. Applications that directly call that function or use that padding mode will encounter this issue. However since there is no support for the SSLv2 protocol in 1.1.1 this is considered a bug and not a security issue in that version. OpenSSL 1.0.2 is out of support and no longer receiving public updates. Premium support customers of OpenSSL 1.0.2 should upgrade to 1.0.2y. Other users should upgrade to 1.1.1j. Fixed in OpenSSL 1.0.2y (Affected 1.0.2s-1.0.2x).

The PHP JOSE Library by Gree Inc. before version 2.2.1 is vulnerable to key confusion/algorithm substitution in the JWS component resulting in bypassing the signature verification via crafted tokens.

mod_ns in Red Hat Enterprise Linux Desktop 7, Red Hat Enterprise Linux HPC Node 7, Red Hat Enterprise Linux Server 7, and Red Hat Enterprise Linux Workstation 7 allows remote attackers to force the use of ciphers that were not intended to be enabled.

Data is truncated wrong when its length is greater than 255 bytes.

A “Use of a Broken or Risky Cryptographic Algorithm” vulnerability in the SSL/TLS component used in B&R Automation Runtime versions before 6.1 and B&R mapp View versions before 6.1 may be abused by unauthenticated network-based attackers to masquerade as services on impacted devices.

Use of a Broken or Risky Cryptographic Algorithm vulnerability in Legion of the Bouncy Castle Inc. BC-JAVA bcpkix on all (pkix modules), Legion of the Bouncy Castle Inc. BCPKIX-FIPS bcpkix on All (pkix modules), Legion of the Bouncy Castle Inc. BCPIX-LTS bcpkix on All (pkix modules). This vulnerability is associated with program files JcaContentVerifierProviderBuilder.Java, JcaContentVerfierProviderBuilder.Java. This issue affects BC-JAVA: from 1.67 before 1.80.2, from 1.81 before 1.81.1, from 1.82 before 1.84; BCPKIX-FIPS: from 2.0.6 before 2.0.11, from 2.1.7 before 2.1.11; BCPIX-LTS: from 2.73.7 before 2.73.11.

In RELIC before 2020-08-01, RSA PKCS#1 v1.5 signature forgery can occur because certain checks of the padding (and of the first two bytes) are inadequate. NOTE: this requires that a low public exponent (such as 3) is being used. The product, by default, does not generate RSA keys with such a low number.

EMC RSA BSAFE Micro Edition Suite (MES) 4.0.x before 4.0.8 and 4.1.x before 4.1.3 and RSA BSAFE SSL-C 2.8.9 and earlier allow remote SSL servers to conduct ECDHE-to-ECDH downgrade attacks and trigger a loss of forward secrecy by omitting the ServerKeyExchange message, a similar issue to CVE-2014-3572.

EMC RSA BSAFE Micro Edition Suite (MES) 4.0.x before 4.0.8 and 4.1.x before 4.1.3 and RSA BSAFE SSL-C 2.8.9 and earlier do not properly restrict TLS state transitions, which makes it easier for remote attackers to conduct cipher-downgrade attacks to EXPORT_RSA ciphers via crafted TLS traffic, related to the "FREAK" issue, a similar issue to CVE-2015-0204.

Jervis is a library for Job DSL plugin scripts and shared Jenkins pipeline libraries. Prior to 2.2, Jervis uses padLeft(32, '0') when it should use padLeft(64, '0') because SHA-256 produces 32 bytes which equates to 64 hex characters. This vulnerability is fixed in 2.2.

Jervis is a library for Job DSL plugin scripts and shared Jenkins pipeline libraries. Prior to 2.2, AES/CBC/PKCS5Padding lacks authentication, making it vulnerable to padding oracle attacks and ciphertext manipulation. This vulnerability is fixed in 2.2.

The application uses an insecure hashing algorithm (MD5) to hash passwords. If an attacker obtained a copy of these hashes, either through exploiting cloud services, performing TLS downgrade attacks on the traffic from a mobile device, or through another means, they may be able to crack the hash in a reasonable amount of time and gain unauthorized access to the victim's account.

The Cloud Functions subsystem in OpenTrace 1.0 might allow fabrication attacks by making billions of TempID requests before an AES-256-GCM key rotation occurs.

LTI 1.3 Tool Library is a library used for building IMS-certified LTI 1.3 tool providers in PHP. Prior to version 5.0, the function used to generate random nonces was not sufficiently cryptographically complex. Users should upgrade to version 5.0 to receive a patch. There are currently no known workarounds.

PyJWT is a Python implementation of RFC 7519. PyJWT supports multiple different JWT signing algorithms. With JWT, an attacker submitting the JWT token can choose the used signing algorithm. The PyJWT library requires that the application chooses what algorithms are supported. The application can specify `jwt.algorithms.get_default_algorithms()` to get support for all algorithms, or specify a single algorithm. The issue is not that big as `algorithms=jwt.algorithms.get_default_algorithms()` has to be used. Users should upgrade to v2.4.0 to receive a patch for this issue. As a workaround, always be explicit with the algorithms that are accepted and expected when decoding.

Emissary is a P2P based data-driven workflow engine. The ChecksumCalculator class within allows for hashing and checksum generation, but it includes or defaults to algorithms that are no longer recommended for secure cryptographic use cases (e.g., SHA-1, CRC32, and SSDEEP). These algorithms, while possibly valid for certain non-security-critical tasks, can expose users to security risks if used in scenarios where strong cryptographic guarantees are required. This issue is fixed in 8.24.0.

OpenIDC/cjose is a C library implementing the Javascript Object Signing and Encryption (JOSE). The AES GCM decryption routine incorrectly uses the Tag length from the actual Authentication Tag provided in the JWE. The spec says that a fixed length of 16 octets must be applied. Therefore this bug allows an attacker to provide a truncated Authentication Tag and to modify the JWE accordingly. Users should upgrade to a version >= 0.6.2.2. Users unable to upgrade should avoid using AES GCM encryption and replace it with another encryption algorithm (e.g. AES CBC).

Z-NOMP before 2018-04-05 has an incorrect Equihash solution verifier that allows attackers to spoof mining shares, as demonstrated by providing a solution with {x1=1,x2=1,x3=1,...,x512=1} to bypass this verifier for any blockheader. This originally affected (for example) the Bitcoin Gold and Zcash cryptocurrencies, and continued to be exploited in the wild in May 2018 against smaller cryptocurrencies.