A vulnerability in the secure boot process of Cisco FXOS Software could allow an authenticated, local attacker to bypass the secure boot mechanisms. The vulnerability is due to insufficient protections of the secure boot process. An attacker could exploit this vulnerability by injecting code into a specific file that is then referenced during the device boot process. A successful exploit could allow the attacker to break the chain of trust and inject code into the boot process of the device which would be executed at each boot and maintain persistence across reboots.

A vulnerability in the ROMMON of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to those of the root user of the underlying operating system. The vulnerability is due to the ROMMON allowing for special parameters to be passed to the device at initial boot up. An attacker could exploit this vulnerability by sending parameters to the device at initial boot up. An exploit could allow the attacker to elevate from a Priv15 user to the root user and execute arbitrary commands with the privileges of the root user.

Cisco VPN Client 5.x through 5.0.07.0440 uses weak permissions for vpnclient.ini, which allows local users to gain privileges by entering an arbitrary program name in the Command field of the ApplicationLauncher section.

Cisco AnyConnect Secure Mobility Client 4.1(8) on OS X and Linux does not verify pathnames before installation actions, which allows local users to obtain root privileges via a crafted installation file, aka Bug ID CSCuv11947.

A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by including crafted arguments to specific commands on the local management CLI. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

The publish-event event-manager feature in Cisco IOS 15.5(2)S and 15.5(3)S on Cloud Services Router 1000V devices allows local users to execute arbitrary commands with root privileges by leveraging administrative access to enter crafted environment variables, aka Bug ID CSCux14943.

The TFTP implementation on Cisco Small Business SPA30x, SPA50x, SPA51x phones 7.5.7 improperly validates firmware-image file integrity, which allows local users to load a Trojan horse image by leveraging shell access, aka Bug ID CSCut67400.

The Management I/O (MIO) component in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices allows local users to execute arbitrary OS commands as root via crafted CLI input, aka Bug ID CSCux10578.

The boot manager in Cisco Application Policy Infrastructure Controller (APIC) 1.1(0.920a) allows local users to bypass intended access restrictions and obtain single-user-mode root access via unspecified vectors, aka Bug ID CSCuu83985.

Cisco Aironet 1850 access points with software 8.1(112.4) allow local users to gain privileges via crafted CLI commands, aka Bug ID CSCuv79694.

The CLI in Cisco TelePresence Video Communication Server (VCS) Expressway X8.5.2 allows local users to obtain root privileges by writing script arguments to an unspecified file, aka Bug ID CSCuv12542.

A vulnerability in the processing of boot options of specific Cisco IOS XE Software switches could allow an authenticated, local attacker with root shell access to the underlying operating system (OS) to conduct a command injection attack during device boot. This vulnerability is due to insufficient input validation checks while processing boot options. An attacker could exploit this vulnerability by modifying device boot options to execute attacker-provided code. A successful exploit may allow an attacker to bypass the Secure Boot process and execute malicious code on an affected device with root-level privileges.

A vulnerability in the image verification feature of Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) could allow an authenticated, local attacker to boot a malicious software image on an affected device. The vulnerability is due to insufficient access restrictions on the area of code that manages the image verification feature. An attacker could exploit this vulnerability by first authenticating to the targeted device and then logging in to the Virtual Device Server (VDS) of an affected device. The attacker could then, from the VDS shell, disable Cisco IOS Software integrity (image) verification. A successful exploit could allow the attacker to boot a malicious Cisco IOS Software image on the targeted device. To exploit this vulnerability, the attacker must have valid user credentials at privilege level 15.

A vulnerability in the interprocess communication (IPC) channel of Cisco AnyConnect Secure Mobility Client for Windows could allow an authenticated, local attacker to perform a DLL hijacking attack. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. The vulnerability is due to insufficient validation of resources that are loaded by the application at run time. An attacker could exploit this vulnerability by sending a crafted IPC message to the AnyConnect process. A successful exploit could allow the attacker to execute arbitrary code on the affected machine with SYSTEM privileges. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system.

The Manager component in Cisco Unified Computing System (UCS) 2.2(3b) on B Blade Server devices allows local users to gain privileges for executing arbitrary CLI commands by leveraging access to the subordinate fabric interconnect, aka Bug ID CSCut32778.

Cisco UCS Central Software 1.2(1a) allows local users to gain privileges for OS command execution via a crafted CLI parameter, aka Bug ID CSCut32795.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to escalate their privileges to a user with root-level privileges. The vulnerability is due to insufficient validation of user-supplied content. This vulnerability could allow an attacker to load malicious software onto an affected device.

Cisco Wireless LAN Controller (WLC) devices with software 7.0(240.0) allow local users to execute arbitrary OS commands in a privileged context via crafted CLI commands, aka Bug ID CSCuj39474.

A vulnerability in the CLI of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to gain root shell access to the underlying operating system and overwrite or read arbitrary files. The attacker would need valid administrative credentials. This vulnerability is due to improper input validation of CLI command arguments. An attacker could exploit this vulnerability by using path traversal techniques when executing a vulnerable command. A successful exploit could allow the attacker to gain root shell access to the underlying operating system and overwrite or read arbitrary files on an affected device.

The diagnostics subsystem in the administrative web interface on Cisco Virtualization Experience (aka VXC) Client 6215 devices with firmware 11.2(27.4) allows local users to gain privileges for OS command execution via a crafted option value, aka Bug ID CSCug54412.

A vulnerability in the CLI of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated to access the CLI. A successful exploit could allow the attacker to execute commands with root privileges.

Cisco NX-OS 6.0(2) and 6.2(2) on Nexus devices has an improper OS configuration, which allows local users to obtain root access via unspecified input to the Python interpreter, aka Bug IDs CSCun02887, CSCur00115, and CSCur00127.

A vulnerability in Cisco FXOS Software could allow an authenticated, local attacker with administrative credentials to cause a buffer overflow condition. The vulnerability is due to incorrect bounds checking of values that are parsed from a specific file. An attacker could exploit this vulnerability by supplying a crafted file that, when it is processed, may cause a stack-based buffer overflow. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system with root privileges. An attacker would need to have valid administrative credentials to exploit this vulnerability.

Cisco AnyConnect Secure Mobility Client 3.1(60) on Windows does not properly validate pathnames, which allows local users to gain privileges via a crafted INF file, aka Bug ID CSCus65862.

A vulnerability in the implementation of the Lua interpreter that is integrated in Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary code with root privileges on the underlying Linux operating system (OS) of an affected device. The vulnerability is due to insufficient restrictions on Lua function calls within the context of user-supplied Lua scripts. An attacker with valid administrative credentials could exploit this vulnerability by submitting a malicious Lua script. When this file is processed, an exploitable buffer overflow condition could occur. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the underlying Linux OS of the affected device.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in software image verification in Cisco IOS XE Software could allow an unauthenticated, physical attacker to install and boot a malicious software image or execute unsigned binaries on an affected device. The vulnerability is due to an improper check on the area of code that manages the verification of the digital signatures of system image files during the initial boot process. An attacker could exploit this vulnerability by loading unsigned software on an affected device. A successful exploit could allow the attacker to install and boot a malicious software image or execute unsigned binaries on the targeted device.

A vulnerability in the upgrade component of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, local attacker to install a malicious file when upgrading. The vulnerability is due to insufficient signature validation. An attacker could exploit this vulnerability by providing a crafted upgrade file. A successful exploit could allow the attacker to upload crafted code to the affected device.

A vulnerability in the application-hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. The attacker could execute IOS XE commands outside the application-hosting subsystem Docker container as well as on the underlying Linux operating system. These commands could be run as the root user. The vulnerability is due to a combination of two factors: (a) incomplete input validation of the user payload of CLI commands, and (b) improper role-based access control (RBAC) when commands are issued at the command line within the application-hosting subsystem. An attacker could exploit this vulnerability by using a CLI command with crafted user input. A successful exploit could allow the lower-privileged attacker to execute arbitrary CLI commands with root privileges. The attacker would need valid user credentials to exploit this vulnerability.

A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, physical attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by stopping the boot initialization of an affected device. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.

A vulnerability in the CLI of Cisco Data Center Network Manager (DCNM) could allow an authenticated, local attacker to elevate privileges to root and execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient restrictions during the execution of an affected CLI command. An attacker could exploit this vulnerability by authenticating as the fmserver user and submitting malicious input to a specific command. A successful exploit could allow the attacker to elevate privileges to root and execute arbitrary commands on the underlying operating system.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the Virtual Services Container of Cisco IOS XE Software could allow an authenticated, local attacker to gain root-level privileges on an affected device. The vulnerability is due to insufficient validation of a user-supplied open virtual appliance (OVA). An attacker could exploit this vulnerability by installing a malicious OVA on an affected device.

A vulnerability in Cisco SD-WAN Solution Software could allow an authenticated, local attacker to elevate privileges to Administrator on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain administrative privileges.

A vulnerability in the CLI parsers of Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an authenticated, local attacker to execute arbitrary shell commands on the Virtual Device Server (VDS) of an affected device. The attacker must have valid user credentials at privilege level 15. The vulnerability is due to insufficient validation of arguments that are passed to specific VDS-related CLI commands. An attacker could exploit this vulnerability by authenticating to the targeted device and including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands in the context of the Linux shell of VDS with the privileges of the root user.

A vulnerability in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their Cisco FTD instance and execute commands with root privileges in the host namespace. The attacker must have valid credentials on the device.The vulnerability exists because a configuration file that is used at container startup has insufficient protections. An attacker could exploit this vulnerability by modifying a specific container configuration file on the underlying file system. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running Cisco FTD instances or the host Cisco FXOS device.

A vulnerability in the CLI of Cisco SD-WAN Solution software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in Cisco Remote PHY Device Software could allow an authenticated, local attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability exists because the affected software does not properly sanitize user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying certain CLI commands with crafted arguments. A successful exploit could allow the attacker to run arbitrary commands as the root user, which could result in a complete system compromise.

A vulnerability in the CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in Cisco Connected Mobile Experiences (CMX) could allow an authenticated, local attacker with administrative credentials to execute arbitrary commands with root privileges. The vulnerability is due to improper user permissions that are configured by default on an affected system. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. To exploit this vulnerability, an attacker would need to have valid administrative credentials.

A vulnerability in Cisco SD-WAN Solution software could allow an authenticated, local attacker to elevate privileges to root on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain root-level privileges.

A vulnerability in the Enable Secret feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker to issue the enable command and get full administrative privileges. To exploit this vulnerability, the attacker would need to have valid credentials for the affected device. The vulnerability is due to a logic error in the implementation of the enable command. An attacker could exploit this vulnerability by logging in to the device and issuing the enable command. A successful exploit could allow the attacker to gain full administrative privileges without using the enable password. Note: The Enable Secret feature is disabled by default.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root on an affected device. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the support tunnel feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access the shell of an affected device even though expert mode is disabled. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by enabling the support tunnel, setting a key, and deriving the tunnel password. A successful exploit could allow the attacker to run any system command with root access on an affected device.

A vulnerability in the local management (local-mgmt) CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.