A vulnerability in the stream reassembly component of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to improper reassembly of traffic streams. An attacker could exploit this vulnerability by sending crafted streams through an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious requests to protected systems that would otherwise be blocked.

A vulnerability in the implementation of the Simple Network Management Protocol (SNMP) Access Control List (ACL) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to perform SNMP polling of an affected device, even if it is configured to deny SNMP traffic. The vulnerability is due to an incorrect length check when the configured ACL name is the maximum length, which is 32 ASCII characters. An attacker could exploit this vulnerability by performing SNMP polling of an affected device. A successful exploit could allow the attacker to perform SNMP polling that should have been denied. The attacker has no control of the configuration of the SNMP ACL name.

A vulnerability in the HTTP traffic filtering component of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to improper handling of HTTP requests, including those communicated over a secure HTTPS connection, that contain maliciously crafted headers. An attacker could exploit this vulnerability by sending malicious requests to an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious requests to protected systems, allowing attackers to deliver malicious content that would otherwise be blocked.

A vulnerability in the normalization functionality of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to insufficient normalization of a text-based payload. An attacker could exploit this vulnerability by sending traffic that contains specifically obfuscated payloads through an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious payloads to protected systems that would otherwise be blocked.

A vulnerability in the protocol detection component of Cisco Firepower Threat Defense Software, Cisco FirePOWER Services Software for ASA, and Cisco Firepower Management Center Software could allow an unauthenticated, remote attacker to bypass filtering protections. The vulnerability is due to improper detection of the initial use of a protocol on a nonstandard port. An attacker could exploit this vulnerability by sending traffic on a nonstandard port for the protocol in use through an affected device. An exploit could allow the attacker to bypass filtering and deliver malicious requests to protected systems that would otherwise be blocked. Once the initial protocol flow on the nonstandard port is detected, future flows on the nonstandard port will be successfully detected and handled as configured by the applied policy.

A vulnerability in the REST API for software device management in Cisco Application Policy Infrastructure Controller (APIC) Software could allow an authenticated, remote attacker to escalate privileges to root on an affected device. The vulnerability is due to incomplete validation and error checking for the file path when specific software is uploaded. An attacker could exploit this vulnerability by uploading malicious software using the REST API. A successful exploit could allow an attacker to escalate their privilege level to root. The attacker would need to have the administrator role on the device.

A vulnerability in the classic access control list (ACL) compression feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to bypass the protection that is offered by a configured ACL on an affected device. This vulnerability is due to incorrect destination address range encoding in the compression module of an ACL that is applied to an interface of an affected device. An attacker could exploit this vulnerability by sending traffic through the affected device that should be denied by the configured ACL. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device, allowing the attacker to access trusted networks that the device might be protecting. There are workarounds that address this vulnerability. This advisory is part of the September 2023 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2023 Semiannual Cisco IOS XR Software Security Advisory Bundled Publication .

A vulnerability in the loading mechanism of specific dynamic link libraries in Cisco Jabber for Windows could allow an authenticated, local attacker to perform a DLL preloading attack. To exploit this vulnerability, the attacker would need to have valid credentials on the Windows system. The vulnerability is due to insufficient validation of the resources loaded by the application at run time. An attacker could exploit this vulnerability by crafting a malicious DLL file and placing it in a specific location on the targeted system. The malicious DLL file would execute when the Jabber application launches. A successful exploit could allow the attacker to execute arbitrary code on the target machine with the privileges of another user's account.

A vulnerability in the filesystem management for the Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an authenticated, local attacker with administrator rights to gain elevated privileges as the root user on an affected device. The vulnerability is due to overly permissive file permissions of specific system files. An attacker could exploit this vulnerability by authenticating to an affected device, creating a crafted command string, and writing this crafted string to a specific file location. A successful exploit could allow the attacker to execute arbitrary operating system commands as root on an affected device. The attacker would need to have valid administrator credentials for the device.

A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to bypass the limited command set of the restricted Guest Shell and execute commands at the privilege level of a network-admin user outside of the Guest Shell. The attacker must authenticate with valid administrator device credentials. The vulnerability is due to the incorrect implementation of a CLI command that allows a Bash command to be incorrectly invoked on the Guest Shell CLI. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Guest Shell prompt. A successful exploit could allow the attacker to issue commands that should be restricted by a Guest Shell account.

A vulnerability in the Cisco Common Services Platform Collector (CSPC) could allow an unauthenticated, remote attacker to access an affected device by using an account that has a default, static password. This account does not have administrator privileges. The vulnerability exists because the affected software has a user account with a default, static password. An attacker could exploit this vulnerability by remotely connecting to the affected system using this account. A successful exploit could allow the attacker to log in to the CSPC using the default account. For Cisco CSPC 2.7.x, Cisco fixed this vulnerability in Release 2.7.4.6. For Cisco CSPC 2.8.x, Cisco fixed this vulnerability in Release 2.8.1.2.

A vulnerability in the 802.1X implementation for Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation of Extensible Authentication Protocol over LAN (EAPOL) frames. An attacker could exploit this vulnerability by sending a crafted EAPOL frame to an interface on the targeted device. A successful exploit could allow the attacker to cause the Layer 2 (L2) forwarding process to restart multiple times, leading to a system-level restart of the device and a DoS condition. Note: This vulnerability affects only NX-OS devices configured with 802.1X functionality. Cisco Nexus 1000V Switch for VMware vSphere devices are affected in versions prior to 5.2(1)SV3(1.4b). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(4). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.3(5)N1(1) and 7.1(5)N1(1b). Nexus 7000 and 7700 Series Switches are affected in versions prior to 8.2(3). Nexus 9000 Series Fabric Switches in ACI Mode are affected in versions prior to 13.2(1l). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(4).

A vulnerability in the file system permissions of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to access sensitive information that is stored in the file system of an affected system. The vulnerability is due to improper implementation of file system permissions. An attacker could exploit this vulnerability by accessing and modifying restricted files. A successful exploit could allow the attacker to access sensitive and critical files. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.2.2.91 and 2.3.1.110. Firepower 9300 Series Next-Generation Firewalls are affected in versions prior to 2.2.2.91 and 2.3.1.110. MDS 9000 Series Multilayer Switches are affected in versions prior to 6.2(25), 8.1(1b), and 8.3(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected in versions prior to 6.0(2)A8(10) and 7.0(3)I7(4). Nexus 3600 Platform Switches are affected in versions prior to 7.0(3)F3(5). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected in versions prior to 7.1(5)N1(1b) and 7.3(3)N1(1). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(22), 7.3(3)D1(1), and 8.2(3). Nexus 9000 Series Switches-Standalone are affected in versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 9500 R-Series Line Cards and Fabric Modules are affected in versions prior to 7.0(3)F3(5).

A vulnerability in the user group configuration of the Cisco SD-WAN Solution could allow an authenticated, local attacker to gain elevated privileges on an affected device. The vulnerability is due to a failure to properly validate certain parameters included within the group configuration. An attacker could exploit this vulnerability by writing a crafted file to the directory where the user group configuration is located in the underlying operating system. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device.

A vulnerability in the Simple Object Access Protocol (SOAP) of Cisco TelePresence Management Suite (TMS) software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to a lack of proper access and authentication controls on the affected TMS software. An attacker could exploit this vulnerability by gaining access to internal, trusted networks to send crafted SOAP calls to the affected device. If successful, an exploit could allow the attacker to access system management tools. Under normal circumstances, this access should be prohibited.

A vulnerability in the CLI of Cisco SD-WAN Solution could allow an authenticated, local attacker to elevate lower-level privileges to the root user on an affected device. The vulnerability is due to insufficient authorization enforcement. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. A successful exploit could allow the attacker to make configuration changes to the system as the root user.

A vulnerability in Cisco DNA Spaces: Connector could allow an authenticated, local attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root. The vulnerability is due to insufficient restrictions during the execution of an affected CLI command. An attacker could exploit this vulnerability by leveraging the insufficient restrictions to modify sensitive files. A successful exploit could allow the attacker to elevate privileges and execute arbitrary commands on the underlying operating system as root.

A vulnerability in the Bash shell implementation for Cisco NX-OS Software could allow an authenticated, local attacker to escalate their privilege level by executing commands authorized to other user roles. The attacker must authenticate with valid user credentials. The vulnerability is due to the incorrect implementation of a Bash shell command that allows role-based access control (RBAC) to be bypassed. An attacker could exploit this vulnerability by authenticating to the device and entering a crafted command at the Bash prompt. A successful exploit could allow the attacker to escalate their privilege level by executing commands that should be restricted to other roles. For example, a dev-ops user could escalate their privilege level to admin with a successful exploit of this vulnerability.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to gain access to sensitive files on an affected device. The vulnerability is due to incorrect permissions settings on affected DCNM software. An attacker could exploit this vulnerability by connecting to the web-based management interface of an affected device and requesting specific URLs. A successful exploit could allow the attacker to download arbitrary files from the underlying filesystem of the affected device.

A vulnerability in the Operations, Administration, Maintenance and Provisioning (OAMP) OpsConsole Server for Cisco Unified Customer Voice Portal (CVP) could allow an authenticated, remote attacker to execute Insecure Direct Object Reference actions on specific pages within the OAMP application. The vulnerability is due to insufficient input validation on specific pages of the OAMP application. An attacker could exploit this vulnerability by authenticating to Cisco Unified CVP and sending crafted HTTP requests. A successful exploit could allow an attacker with administrator or read-only privileges to learn information outside of their expected scope. An attacker with administrator privileges could modify certain configuration details of resources outside of their defined scope, which could result in a denial of service (DoS) condition.

A vulnerability in the vManage web-based UI (Web UI) of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to gain elevated privileges on an affected vManage device. The vulnerability is due to a failure to properly authorize certain user actions in the device configuration. An attacker could exploit this vulnerability by logging in to the vManage Web UI and sending crafted HTTP requests to vManage. A successful exploit could allow attackers to gain elevated privileges and make changes to the configuration that they would not normally be authorized to make.

A vulnerability in the Webex Network Recording Admin page of Cisco Webex Meetings could allow an authenticated, remote attacker to elevate privileges in the context of the affected page. To exploit this vulnerability, the attacker must be logged in as a low-level administrator. The vulnerability is due to insufficient access control validation. An attacker could exploit this vulnerability by submitting a crafted URL request to gain privileged access in the context of the affected page. A successful exploit could allow the attacker to elevate privileges in the Webex Recording Admin page, which could allow them to view or delete recordings that they would not normally be able to access.

A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating as the remote support user and submitting malicious input to a specific command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system (OS) with root privileges.

A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an authenticated, local attacker to execute code with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating as the remote support user and sending malicious traffic to a listener who is internal to the device. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the web interface for Cisco Prime Collaboration Provisioning could allow an unauthenticated, remote attacker to bypass authentication and perform command injection with root privileges. The vulnerability is due to missing security constraints in certain HTTP request methods, which could allow access to files via the web interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the targeted application. This vulnerability affects Cisco Prime Collaboration Provisioning Software Releases prior to 12.1. Cisco Bug IDs: CSCvc98724.

A vulnerability in Cisco Prime Data Center Network Manager (DCNM) Software could allow an unauthenticated, remote attacker to log in to the administrative console of a DCNM server by using an account that has a default, static password. The account could be granted root- or system-level privileges. The vulnerability exists because the affected software has a default user account that has a default, static password. The user account is created automatically when the software is installed. An attacker could exploit this vulnerability by connecting remotely to an affected system and logging in to the affected software by using the credentials for this default user account. A successful exploit could allow the attacker to use this default user account to log in to the affected software and gain access to the administrative console of a DCNM server. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software releases prior to Release 10.2(1) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd95346.

A vulnerability in the Start Before Logon (SBL) module of Cisco AnyConnect Secure Mobility Client Software for Windows could allow an unauthenticated, local attacker to open Internet Explorer with the privileges of the SYSTEM user. The vulnerability is due to insufficient implementation of the access controls. An attacker could exploit this vulnerability by opening the Internet Explorer browser. An exploit could allow the attacker to use Internet Explorer with the privileges of the SYSTEM user. This may allow the attacker to execute privileged commands on the targeted system. This vulnerability affects versions prior to released versions 4.4.00243 and later and 4.3.05017 and later. Cisco Bug IDs: CSCvc43976.

A vulnerability in the Open Agent Container (OAC) feature of Cisco Nexus Series Switches could allow an unauthenticated, local attacker to read and send packets outside the scope of the OAC. The vulnerability is due to insufficient internal security measures in the OAC feature. An attacker could exploit this vulnerability by crafting specific packets for communication on the device-internal network. A successful exploit could allow the attacker to run code on the underlying host operating system. OAC is not enabled by default. For a device to be vulnerable, an administrator would need to install and activate this feature. This vulnerability affects the following Cisco Nexus Series Switches: Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches. Cisco Bug IDs: CSCve53542, CSCvf36621.

A vulnerability in the routine that loads DLL files in Cisco Meeting App for Windows could allow an authenticated, local attacker to run an executable file with privileges equivalent to those of Cisco Meeting App. The vulnerability is due to incomplete input validation of the path name for DLL files before they are loaded. An attacker could exploit this vulnerability by installing a crafted DLL file in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to those of Cisco Meeting App. The attacker would need valid user credentials to exploit this vulnerability. Cisco Bug IDs: CSCvd77907.

Cisco Adaptive Security Appliances (ASA) 5500 Series and PIX Security Appliances 7.0 before 7.0(8)1, 7.1 before 7.1(2)74, 7.2 before 7.2(4)9, and 8.0 before 8.0(4)5 do not properly implement the implicit deny statement, which might allow remote attackers to successfully send packets that bypass intended access restrictions, aka Bug ID CSCsq91277.

The SCP server in Cisco IOS 12.2 through 12.4, when Role-Based CLI Access is enabled, does not enforce the CLI view configuration for file transfers, which allows remote authenticated users with an attached CLI view to (1) read or (2) overwrite arbitrary files via an SCP command.

A privilege escalation vulnerability in the Secure Shell (SSH) subsystem in the StarOS operating system for Cisco ASR 5000 Series, ASR 5500 Series, ASR 5700 Series devices, and Cisco Virtualized Packet Core could allow an authenticated, remote attacker to gain unrestricted, root shell access. The vulnerability is due to missing input validation of parameters passed during SSH or SFTP login. An attacker could exploit this vulnerability by providing crafted user input to the SSH or SFTP command-line interface (CLI) during SSH or SFTP login. An exploit could allow an authenticated attacker to gain root privileges access on the router. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered via both IPv4 and IPv6 traffic. An established TCP connection toward port 22, the SSH default port, is needed to perform the attack. The attacker must have valid credentials to login to the system via SSH or SFTP. The following products have been confirmed to be vulnerable: Cisco ASR 5000/5500/5700 Series devices running StarOS after 17.7.0 and prior to 18.7.4, 19.5, and 20.2.3 with SSH configured are vulnerable. Cisco Virtualized Packet Core - Single Instance (VPC-SI) and Distributed Instance (VPC-DI) devices running StarOS prior to N4.2.7 (19.3.v7) and N4.7 (20.2.v0) with SSH configured are vulnerable. Cisco Bug IDs: CSCva65853.

A vulnerability in the Cisco FXOS CLI feature on specific hardware platforms for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to elevate their administrative privileges to root. The attacker would need valid administrative credentials on the device to exploit this vulnerability. This vulnerability exists because certain system configurations and executable files have insecure storage and permissions. An attacker could exploit this vulnerability by authenticating on the device and then performing a series of steps that includes downloading malicious system files and accessing the Cisco FXOS CLI to configure the attack. A successful exploit could allow the attacker to obtain root access on the device.

A vulnerability in the access control list (ACL) programming of Cisco Nexus 3550-F Switches could allow an unauthenticated, remote attacker to send traffic that should be blocked to the management interface of an affected device.  This vulnerability exists because ACL deny rules are not properly enforced at the time of device reboot. An attacker could exploit this vulnerability by attempting to send traffic to the management interface of an affected device. A successful exploit could allow the attacker to send traffic to the management interface of the affected device.

A vulnerability in the Object Groups for Access Control Lists (ACLs) feature of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass configured access controls on managed devices that are running Cisco Firepower Threat Defense (FTD) Software. This vulnerability is due to the incorrect deployment of the Object Groups for ACLs feature from Cisco FMC Software to managed FTD devices in high-availability setups. After an affected device is rebooted following Object Groups for ACLs deployment, an attacker can exploit this vulnerability by sending traffic through the affected device. A successful exploit could allow the attacker to bypass configured access controls and successfully send traffic to devices that are expected to be protected by the affected device.

A vulnerability in the upgrade component of Cisco AnyConnect Secure Mobility Client could allow an authenticated, local attacker with low privileges to read arbitrary files on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient file permission restrictions. An attacker could exploit this vulnerability by sending a crafted command from the local CLI to the application. A successful exploit could allow the attacker to read arbitrary files on the underlying OS of the affected device. The attacker would need to have valid user credentials to exploit this vulnerability.

A vulnerability in motherboard console ports of line cards for Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to access an affected device's operating system. The vulnerability exists because an engineering console port is available on the motherboard of the affected line cards. An attacker could exploit this vulnerability by physically connecting to the console port on the line card. A successful exploit could allow the attacker to gain full access to the affected device's operating system. This vulnerability affects only Cisco ASR 1000 Series Routers that have removable line cards and Cisco cBR-8 Converged Broadband Routers, if they are running certain Cisco IOS XE 3.16 through 16.5 releases. Cisco Bug IDs: CSCvc65866, CSCve77132.

A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746.

A vulnerability in the Network Access Manager (NAM) of Cisco AnyConnect Secure Mobility Client could allow an authenticated, local attacker to enable multiple network adapters, aka a Dual-Homed Interface vulnerability. The vulnerability is due to insufficient NAM policy enforcement. An attacker could exploit this vulnerability by manipulating network interfaces of the device to allow multiple active network interfaces. A successful exploit could allow the attacker to send traffic over a non-authorized network interface. Cisco Bug IDs: CSCvf66539.

A vulnerability in the image verification feature of Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) could allow an authenticated, local attacker to boot a malicious software image on an affected device. The vulnerability is due to insufficient access restrictions on the area of code that manages the image verification feature. An attacker could exploit this vulnerability by first authenticating to the targeted device and then logging in to the Virtual Device Server (VDS) of an affected device. The attacker could then, from the VDS shell, disable Cisco IOS Software integrity (image) verification. A successful exploit could allow the attacker to boot a malicious Cisco IOS Software image on the targeted device. To exploit this vulnerability, the attacker must have valid user credentials at privilege level 15.

A vulnerability in Cisco SD-WAN Solution Software could allow an authenticated, local attacker to elevate privileges to Administrator on the underlying operating system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to gain administrative privileges.

A vulnerability in the ROMMON of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to those of the root user of the underlying operating system. The vulnerability is due to the ROMMON allowing for special parameters to be passed to the device at initial boot up. An attacker could exploit this vulnerability by sending parameters to the device at initial boot up. An exploit could allow the attacker to elevate from a Priv15 user to the root user and execute arbitrary commands with the privileges of the root user.

The ImageCache module 5.x before 5.x-2.5 and 6.x before 6.x-2.0-beta10, a module for Drupal, when the private file system is used, does not properly perform access control for derivative images, which allows remote attackers to view arbitrary images via a request that specifies an image's filename.

Unrestricted file upload vulnerability in admin/editor/filemanager/browser.html in Anantasoft Gazelle CMS 1.0 allows remote attackers to execute arbitrary code by uploading a file with an executable extension, then accessing it via a direct request to the file in user/File/.

The posix_mkfifo function in ext/posix/posix.c in PHP before 5.2.12 and 5.3.x before 5.3.1 allows context-dependent attackers to bypass open_basedir restrictions, and create FIFO files, via the pathname and mode arguments, as demonstrated by creating a .htaccess file.

The Abstract Window Toolkit (AWT) implementation in Sun Java SE 6 before Update 15 on X11 does not impose the intended constraint on distance from the window border to the Security Warning Icon, which makes it easier for context-dependent attackers to trick a user into interacting unsafely with an untrusted applet.

Unspecified vulnerability in LoginToboggan 6.x-1.x before 6.x-1.5, a module for Drupal, when "Allow users to login using their e-mail address" is enabled, allows remote blocked users to bypass intended access restrictions via unspecified vectors.

The Abstract Window Toolkit (AWT) implementation in Sun Java SE 6 before Update 15 on Windows 2000 Professional does not provide a Security Warning Icon, which makes it easier for context-dependent attackers to trick a user into interacting unsafely with an untrusted applet.

The NFS daemon (aka nfsd) in Sun Solaris 10 and OpenSolaris before snv_106, when NFSv3 is used, does not properly implement combinations of security modes, which allows remote attackers to bypass intended access restrictions and read or modify files, as demonstrated by a combination of the sec=sys and sec=krb5 security modes, related to modes that "override each other."