The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

Heap-based buffer overflow in Microsoft SQL Server 2000 SP4, 8.00.2050, 8.00.2039, and earlier; SQL Server 2000 Desktop Engine (MSDE 2000) SP4; SQL Server 2005 SP2 and 9.00.1399.06; SQL Server 2000 Desktop Engine (WMSDE) on Windows Server 2003 SP1 and SP2; and Windows Internal Database (WYukon) SP2 allows remote authenticated users to cause a denial of service (access violation exception) or execute arbitrary code by calling the sp_replwritetovarbin extended stored procedure with a set of invalid parameters that trigger memory overwrite, aka "SQL Server sp_replwritetovarbin Limited Memory Overwrite Vulnerability."

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

Buffer overflow in Microsoft SQL Server 2005 SP1 and SP2, and 2005 Express Edition SP1 and SP2, allows remote authenticated users to execute arbitrary code via a crafted insert statement.

Stack-based buffer overflow in freeSSHd 1.2.1 allows remote authenticated users to cause a denial of service (service crash) and potentially execute arbitrary code via a long argument to the (1) rename and (2) realpath parameters.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A heap overflow vulnerability in Citrix NetScaler Gateway versions 10.1 before 135.8/135.12, 10.5 before 65.11, 11.0 before 70.12, and 11.1 before 52.13 allows a remote authenticated attacker to run arbitrary commands via unspecified vectors.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

Buffer overflow in the server in OpenTTD 0.6.1 and earlier allows remote authenticated users to cause a denial of service (persistent game disruption) or possibly execute arbitrary code via vectors involving many long names for "companies and clients."

An exploitable buffer overflow vulnerability exists in the remote video-host communication of video-core's HTTP server of Samsung SmartThings Hub STH-ETH-250 devices with firmware version 0.20.17. The video-core process insecurely parses the AWSELB cookie while communicating with remote video-host servers, leading to a buffer overflow on the heap. An attacker able to impersonate the remote HTTP servers could trigger this vulnerability.

Buffer overflow in the openwsman management service in VMware ESXi 3.5 and ESX 3.5 allows remote authenticated users to gain privileges via an "invalid Content-Length."

A flaw has been found in Edimax BR-6428NS 1.10. This affects the function formL2TPSetup of the file /goform/formL2TPSetup of the component POST Request Handler. This manipulation of the argument L2TPUserName causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in D-Link DIR-825M 1.1.12. This vulnerability affects the function sub_4151FC of the file /boafrm/formVpnConfigSetup. The manipulation of the argument submit-url leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

A vulnerability was determined in Totolink WA300 5.2cu.7112_B20190227. This issue affects the function UploadCustomModule of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. Executing a manipulation of the argument File can lead to buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was determined in Tenda HG3 2.0. Impacted is the function formUploadConfig of the file /boaform/formIPv6Routing. This manipulation of the argument destNet causes stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized.

Stack-based buffer overflow in the File System Manager for EMC DiskXtender 6.20.060 allows remote authenticated users to execute arbitrary code via a crafted request to the RPC interface.

A flaw has been found in Tenda F456 1.0.0.5. The impacted element is the function fromNatlimitof of the file /goform/Natlimit of the component httpd. Executing a manipulation can lead to buffer overflow. The attack may be launched remotely. The exploit has been published and may be used.

A vulnerability was detected in Tenda F456 1.0.0.5. The affected element is the function formQuickIndex of the file /goform/QuickIndex of the component httpd. Performing a manipulation of the argument mit_linktype results in buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

A vulnerability was found in Tenda CX12L 16.03.53.12. This issue affects the function formSetPPTPServer of the file /goform/SetPptpServerCfg”. The manipulation results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

A security vulnerability has been detected in TRENDnet TEW-821DAP 1.12B01. Impacted is the function auto_update_firmware of the component Firmware Udpate. The manipulation of the argument str leads to buffer overflow. The attack may be initiated remotely. The vendor explains: "That firmware version will only work on our hardware version v1.xR. We have already EOL that product 8 years ago and are no longer selling". This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in Shenzhen Libituo Technology LBT-T300-HW1 up to 1.2.8. Impacted is the function start_lan of the file /apply.cgi. The manipulation of the argument Channel/ApCliSsid leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Tenda F456 1.0.0.5. Impacted is the function fromSafeUrlFilter of the file /goform/SafeUrlFilter of the component httpd. The manipulation of the argument page results in buffer overflow. The attack may be performed from remote. The exploit is now public and may be used.

Stack-based buffer overflow in the dhost module in Novell eDirectory 8.8 SP5 for Windows allows remote authenticated users to execute arbitrary code via long sadminpwd and verifypwd parameters in a submit action to /dhost/httpstk.

A security vulnerability has been detected in Tenda F456 1.0.0.5. This impacts the function fromPPTPUserSetting of the file /goform/PPTPUserSetting of the component httpd. Such manipulation of the argument delno leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed publicly and may be used.

A vulnerability has been found in UTT HiPER 1200GW up to 2.5.3-170306. The impacted element is the function strcpy of the file /goform/formRemoteControl. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A security flaw has been discovered in UTT HiPER 1250GW up to 3.2.7-210907-180535. Impacted is the function strcpy of the file route/goform/ConfigAdvideo. The manipulation of the argument Profile results in buffer overflow. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

A security vulnerability has been detected in Edimax BR-6428nC up to 1.16. This impacts an unknown function of the file /goform/setWAN. Such manipulation of the argument pptpDfGateway  leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Totolink N300RH 3.2.4-B20220812. This vulnerability affects the function setMacFilterRules of the file /cgi-bin/cstecgi.cgi of the component POST Request Handler. The manipulation of the argument mac_address results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used.

A vulnerability was detected in D-Link DI-8100 16.07.26A1. Affected by this issue is the function tggl_asp of the file /tggl.asp of the component HTTP Request Handler. Performing a manipulation of the argument Name results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used.

A vulnerability was determined in UTT HiPER 1250GW up to 3.2.7-210907-180535. This vulnerability affects the function strcpy of the file route/goform/NTP. Executing a manipulation of the argument Profile can lead to buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

A flaw has been found in Shenzhen Libituo Technology LBT-T300-HW1 up to 1.2.8. This issue affects the function start_single_service of the component Web Management Interface. Executing a manipulation of the argument vpn_pptp_server/vpn_l2tp_server can lead to buffer overflow. The attack can be executed remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Totolink X5000R 9.1.0u.6369_B20230113. This vulnerability affects the function sub_458E40 of the file /boafrm/formDdns. The manipulation of the argument submit-url leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

A flaw has been found in Tenda F456 1.0.0.5. The affected element is an unknown function of the file /goform/setcfm of the component httpd. This manipulation of the argument funcname/funcpara1 causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used.

Stack-based buffer overflow in the IMAP service in NetWin Surgemail 3.8k4-4 and earlier allows remote authenticated users to execute arbitrary code via a long first argument to the LIST command.

A vulnerability was identified in UTT HiPER 1250GW up to 3.2.7-210907-180535. This issue affects the function strcpy of the file route/goform/formTaskEdit_ap. The manipulation of the argument Profile leads to buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used.

A vulnerability was found in D-Link DCS-935L up to 1.10.01. The impacted element is the function SetDeviceSettings of the file /web/cgi-bin/hnap/hnap_service of the component HNAP Service. The manipulation of the argument AdminPassword results in buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

A flaw has been found in Tenda 4G300 US_4G300V1.0Mt_V1.01.42_CN_TDC01. Affected is the function sub_427C3C of the file /goform/SafeMacFilter. This manipulation of the argument page causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used.

A vulnerability was found in D-Link DIR-825M 1.1.12. This issue affects the function sub_414BA8 of the file /boafrm/formWanConfigSetup. The manipulation of the argument submit-url results in buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used.

A vulnerability has been found in Tenda F456 1.0.0.5. This affects the function fromWrlclientSet of the file /goform/WrlclientSet of the component httpd. The manipulation leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in code-projects for Plugin 4.1.2cu.5137. The impacted element is the function setWiFiMultipleConfig in the library /lib/cste_modules/wireless.so of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument wepkey2 results in buffer overflow. The attack can be launched remotely. The exploit is now public and may be used.

A flaw has been found in TOTOLINK A7000R up to 9.1.0u.6115. The affected element is the function setWiFiEasyGuestCfg of the file /cgi-bin/cstecgi.cgi. This manipulation of the argument ssid5g causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used.

A flaw has been found in D-Link DIR-605L 2.13B01. Affected by this issue is the function formSetMACFilter of the file /goform/formSetMACFilter of the component POST Request Handler. This manipulation of the argument curTime causes buffer overflow. The attack may be initiated remotely. The exploit has been published and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda F451 1.0.0.7. Affected by this issue is the function formWrlExtraSet of the file /goform/WrlExtraSet. The manipulation of the argument GO results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used.

A vulnerability has been found in Belkin F9K1015 1.00.10. Affected by this issue is the function formWISP5G of the file /goform/formWISP5G. Such manipulation of the argument webpage leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in D-Link DIR-513 1.10. This affects the function formSetPassword of the file /goform/formSetPassword of the component POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability has been found in Tenda F451 1.0.0.7. Affected by this vulnerability is the function fromSafeEmailFilter of the file /goform/SafeEmailFilter. The manipulation of the argument page leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.