Multiple SQL injection vulnerabilities in Cisco Unified Operations Manager (CUOM) before 8.6 allow remote attackers to execute arbitrary SQL commands via (1) the CCMs parameter to iptm/PRTestCreation.do or (2) the ccm parameter to iptm/TelePresenceReportAction.do, aka Bug ID CSCtn61716.

Cisco 12000 with IOS 12.0 and lines card based on Engine 2 does not properly handle an outbound ACL when an input ACL is not configured on all the interfaces of a multi port line card, which could allow remote attackers to bypass the intended access controls.

Cisco TelePresence Recording Server devices with software 1.6.x do not require authentication for an XML-RPC interface, which allows remote attackers to perform unspecified actions via a session on TCP port 8080, aka Bug ID CSCtg35833.

A vulnerability in the install function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to access the administrative web interface using a default hard-coded username and password that are used during install. The vulnerability is due to a hard-coded password that, in some cases, is not replaced with a unique password. A successful exploit could allow the attacker to access the administrative web interface with administrator-level privileges.

Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to bypass authentication and invoke arbitrary methods via a malformed SOAP request, aka Bug ID CSCtc59562.

Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote attackers to bypass SMTP inspection via vectors involving a prepended space character, aka Bug ID CSCte14901.

A default configuration of CiscoSecure Access Control Server (ACS) allows remote users to modify the server database without authentication.

Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) permit packets to pass before the configuration has been loaded, which might allow remote attackers to bypass intended access restrictions by sending network traffic during device startup, aka Bug ID CSCsy86769.

The Cisco Content Services Switch (CSS) 11500 with software 8.20.4.02 and the Application Control Engine (ACE) 4710 with software A2(3.0) do not properly handle LF header terminators in situations where the GET line is terminated by CRLF, which allows remote attackers to conduct HTTP request smuggling attacks and possibly bypass intended header insertions via crafted header data, as demonstrated by an LF character between the ClientCert-Subject and ClientCert-Subject-CN headers. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-1576.

The Cisco Content Services Switch (CSS) 11500 with software before 8.20.4.02 and the Application Control Engine (ACE) 4710 with software before A2(3.0) do not properly handle use of LF, CR, and LFCR as alternatives to the standard CRLF sequence between HTTP headers, which allows remote attackers to bypass intended header insertions or conduct HTTP request smuggling attacks via crafted header data, as demonstrated by LF characters preceding ClientCert-Subject and ClientCert-Subject-CN headers, aka Bug ID CSCta04885.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Cisco Umbrella Secure Web Gateway service could allow an unauthenticated, remote attacker to bypass the file inspection feature. This vulnerability is due to insufficient restrictions in the file inspection feature. An attacker could exploit this vulnerability by downloading a crafted payload through specific methods. A successful exploit could allow the attacker to bypass file inspection protections and download a malicious payload.

A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008.

On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is remote command execution via shell metacharacters in the pingAddr parameter to the waitPingqry.cgi URI. The command output is visible at /PingMsg.cmd.

A vulnerability in Cisco Meeting Server and Meeting App could allow an unauthenticated, remote attacker to execute arbitrary code on an affected system. This vulnerability affects the following products: Cisco Meeting Server releases prior to 2.0.1, Acano Server releases prior to 1.8.16 and prior to 1.9.3, Cisco Meeting App releases prior to 1.9.8, Acano Meeting Apps releases prior to 1.8.35. More Information: CSCva75942 CSCvb67878. Known Affected Releases: 1.81.92.0.

A vulnerability in the Session Description Protocol (SDP) parser of Cisco Meeting Server could allow an unauthenticated, remote attacker to execute arbitrary code on an affected system. This vulnerability affects the following products: Cisco Meeting Server releases prior to Release 2.0.3, Acano Server releases 1.9.x prior to Release 1.9.5, Acano Server releases 1.8.x prior to Release 1.8.17. More Information: CSCva76004. Known Affected Releases: 1.8.x 1.92.0.

Vulnerability in Cisco IOS 11.1CC and 11.1CT with distributed fast switching (DFS) enabled allows remote attackers to bypass certain access control lists when the router switches traffic from a DFS-enabled interface to an interface that does not have DFS enabled, as described by Cisco bug CSCdk35564.

The HTTP server in Cisco 7xx series routers 3.2 through 4.2 is enabled by default, which allows remote attackers to change the router's configuration.

Cisco Secure ACS 3.x before 3.3(4) Build 12 patch 7, 4.0.x, 4.1.x before 4.1(4) Build 13 Patch 11, and 4.2.x before 4.2(0) Build 124 Patch 4 does not properly handle an EAP Response packet in which the value of the length field exceeds the actual packet length, which allows remote authenticated users to cause a denial of service (CSRadius and CSAuth service crash) or possibly execute arbitrary code via a crafted RADIUS (1) EAP-Response/Identity, (2) EAP-Response/MD5, or (3) EAP-Response/TLS Message Attribute packet.

Buffer overflow in Cisco Unified CallManager (CUCM) 5.0(1) through 5.0(3a) allows remote attackers to execute arbitrary code via a long hostname in a SIP request, aka bug CSCsd96542.

Cisco Firepower System Software 6.0.0 through 6.1.0 has a hardcoded account, which allows remote attackers to obtain CLI access by leveraging knowledge of the password, aka Bug ID CSCuz56238.

Cisco Unified Computing System (UCS) Central Software 1.3(1b) and earlier allows remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuv33856.

Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) allow remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuy21882.

Cisco Aironet 1800 devices with software 7.2, 7.3, 7.4, 8.1(112.3), 8.1(112.4), and 8.1(15.14) have a default account, which makes it easier for remote attackers to obtain access via unspecified vectors, aka Bug ID CSCuw58062.

Cisco EPC3928 devices with EDVA 5.5.10, 5.5.11, and 5.7.1 allow remote attackers to bypass an intended authentication requirement and execute unspecified administrative functions via a crafted HTTP request, aka Bug ID CSCux24941.

Cisco WebEx Meeting Center does not properly restrict the content of URLs in GET requests, which allows remote attackers to obtain sensitive information or conduct SQL injection attacks via vectors involving read access to a request, aka Bug ID CSCup88398.

Cisco Unity 2.x, 3.x, and 4.x, when integrated with Microsoft Exchange, has several hard coded usernames and passwords, which allows remote attackers to gain unauthorized access and change configuration settings or read outgoing or incoming e-mail messages.

Vulnerability in Cisco routers versions 8.2 through 9.1 allows remote attackers to bypass access control lists when extended IP access lists are used on certain interfaces, the IP route cache is enabled, and the access list uses the "established" keyword.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

Cisco Secure ACS does not require authentication when Cisco Trust Agent (CTA) transmits posture information, which might allow remote attackers to gain network access via a spoofed Network Endpoint Assessment posture, aka "NACATTACK." NOTE: this attack might be limited to authenticated users and devices.

Cisco Wireless Control System (WCS) before 4.0.96.0 has a hard-coded FTP username and password for backup operations, which allows remote attackers to read and modify arbitrary files via unspecified vectors related to "properties of the FTP server," aka Bug ID CSCse93014.

Stack-based buffer overflow in the CSAdmin service in Cisco Secure Access Control Server (ACS) for Windows before 4.1 and ACS Solution Engine before 4.1 allows remote attackers to execute arbitrary code via a crafted HTTP GET request.

A vulnerability in the symbolic link (symlink) creation functionality of the AutoVNF tool for the Cisco Ultra Services Framework could allow an unauthenticated, remote attacker to read sensitive files or execute malicious code on an affected system. The vulnerability is due to the absence of validation checks for the input that is used to create symbolic links. This vulnerability affects all releases of the Cisco Ultra Services Framework prior to Releases 5.0.3 and 5.1. Cisco Bug IDs: CSCvc76654.

Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.3, adds an "HTTPS on Public Inbound (XML-Auto)(forward/in)" rule but sets the protocol to "ANY" when the XML filter configuration is enabled, which ultimately allows arbitrary traffic to pass through the concentrator.

Cisco Security Agent Management Center (CSAMC) 5.1 before 5.1.0.79 does not properly handle certain LDAP error messages, which allows remote attackers to bypass authentication requirements via an empty password when using an external LDAP server.

Cisco NAC allows quarantined devices to communicate over the network with (1) DNS, (2) DHCP, and (3) EAPoUDP, which allows attackers to bypass control methods by tunneling network traffic through one of these protocols.

Heap-based buffer overflow in the VLAN Trunking Protocol (VTP) feature in Cisco IOS 12.1(19) allows remote attackers to execute arbitrary code via a long VLAN name in a VTP type 2 summary advertisement.

Unspecified vulnerability in Cisco IPS 5.0 before 5.0(6p2) and 5.1 before 5.1(2), when running in inline or promiscuous mode, allows remote attackers to bypass traffic inspection via a "crafted sequence of fragmented IP packets".

Cisco Wireless Control System (WCS) for Linux and Windows 4.0(1) and earlier uses a default administrator username "root" and password "public," which allows remote attackers to gain access (aka bug CSCse21391).

The default configuration of IOS HTTP server in Cisco Router Web Setup (CRWS) before 3.3.0 build 31 does not require credentials, which allows remote attackers to access the server with arbitrary privilege levels, aka bug CSCsa78190.

Cisco Secure Access Control Server (ACS) 4.x for Windows uses the client's IP address and the server's port number to grant access to an HTTP server port for an administration session, which allows remote attackers to bypass authentication via various methods, aka "ACS Weak Session Management Vulnerability."

The internal database in Cisco Wireless Control System (WCS) for Linux and Windows before 3.2(63) stores a hard-coded username and password in plaintext within unspecified files, which allows remote authenticated users to access the database (aka bug CSCsd15951).

The default configuration of the proxy for Cisco Cache Engine and Content Engine allows remote attackers to use HTTPS to make TCP connections to allowed IP addresses while hiding the actual source IP.

jmx-console/HtmlAdaptor in the jmx-console in the JBoss web application server, as shipped with Cisco Security Monitoring, Analysis and Response System (CS-MARS) before 4.2.1, allows remote attackers to gain privileges as the CS-MARS administrator and execute arbitrary Java code via an invokeOp action in the BSHDeployer jboss.scripts service name.

The internal database in Cisco Wireless Control System (WCS) for Linux and Windows before 3.2(51) uses an undocumented, hard-coded username and password, which allows remote authenticated users to read, and possibly modify, sensitive configuration data (aka bugs CSCsd15955).

NDSAuth.DLL in Cisco Secure Authentication Control Server (ACS) 3.0.1 does not check the Expired or Disabled state of users in the Novell Directory Services (NDS), which could allow those users to authenticate to the server.

Cisco Cloud Services Platform (CSP) 2100 2.0 allows remote attackers to execute arbitrary code via a crafted dnslookup command in an HTTP request, aka Bug ID CSCuz89093.

Cisco CiscoWorks Wireless LAN Solution Engine (WLSE) and WLSE Express before 2.13, Hosting Solution Engine (HSE) and User Registration Tool (URT) before 20060419, and all versions of Ethernet Subscriber Solution Engine (ESSE) and CiscoWorks2000 Service Management Solution (SMS) allow local users to gain Linux shell access via shell metacharacters in arguments to the "show" command in the application's command line interface (CLI), aka bug ID CSCsd21502 (WLSE), CSCsd22861 (URT), and CSCsd22859 (HSE). NOTE: other issues might be addressed by the Cisco advisory.

The installation of Cisco Transport Controller (CTC) for Cisco Optical Networking System (ONS) 15000 series nodes adds a Java policy file entry with a wildcard that grants the java.security.AllPermission permission to any http URL containing "fs/LAUNCHER.jar", which allows remote attackers to execute arbitrary code on a CTC workstation, aka bug ID CSCea25049.

Cisco PIX/ASA 7.1.x before 7.1(2) and 7.0.x before 7.0(5), PIX 6.3.x before 6.3.5(112), and FWSM 2.3.x before 2.3(4) and 3.x before 3.1(7), when used with Websense/N2H2, allows remote attackers to bypass HTTP access restrictions by splitting the GET method of an HTTP request into multiple packets, which prevents the request from being sent to Websense for inspection, aka bugs CSCsc67612, CSCsc68472, and CSCsd81734.