A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) and Cisco Content Security Management Appliance (SMA) could allow an unauthenticated, remote attacker to cause repeated crashes in some internal processes that are running on the affected devices, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation of email attachments. An attacker could exploit this vulnerability by sending an email message with a crafted attachment through an affected device. A successful exploit could allow the attacker to cause specific processes to crash repeatedly, resulting in the complete unavailability of both the Cisco Advanced Malware Protection (AMP) and message tracking features and in severe performance degradation while processing email. After the affected processes restart, the software resumes filtering for the same attachment, causing the affected processes to crash and restart again. A successful exploit could also allow the attacker to cause a repeated DoS condition. Manual intervention may be required to recover from this situation.

A vulnerability in the User Data Services (UDS) API of Cisco Unified Communications Manager (Unified CM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the management GUI. The vulnerability is due to improper validation of input parameters in the UDS API requests. An attacker could exploit this vulnerability by sending a crafted request to the UDS API of an affected device. A successful exploit could allow the attacker to make the A Cisco DB service quit unexpectedly, preventing admin access to the Unified CM management GUI. Manual intervention may be required to restore normal operation. Software versions 10.5, 11.5, 12.0, 12.5 are affected.

A vulnerability in the ISDN functions of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect processing of specific values in the Q.931 information elements. An attacker could exploit this vulnerability by calling the affected device with specific Q.931 information elements being present. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device.

A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a parsing issue on DNS packets. An attacker could exploit these vulnerabilities by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the cryptographic driver for Cisco Adaptive Security Appliance Software (ASA) and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reboot unexpectedly. The vulnerability is due to incomplete input validation of a Secure Sockets Layer (SSL) or Transport Layer Security (TLS) ingress packet header. An attacker could exploit this vulnerability by sending a crafted TLS/SSL packet to an interface on the targeted device. An exploit could allow the attacker to cause the device to reload, which will result in a denial of service (DoS) condition. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is required to exploit this vulnerability.

A vulnerability in the Network Address Translation 64 (NAT64) functions of Cisco IOS Software could allow an unauthenticated, remote attacker to cause either an interface queue wedge or a device reload. The vulnerability is due to the incorrect handling of certain IPv4 packet streams that are sent through the device. An attacker could exploit this vulnerability by sending specific IPv4 packet streams through the device. An exploit could allow the attacker to either cause an interface queue wedge or a device reload, resulting in a denial of service (DoS) condition.

A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software does not restrict the maximum size of certain files that can be written to disk. An attacker who has valid administrator credentials for an affected system could exploit this vulnerability by sending a crafted, remote connection request to an affected system. A successful exploit could allow the attacker to write a file that consumes most of the available disk space on the system, causing application functions to operate abnormally and leading to a DoS condition. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 12.5(1)SR1.

Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54 and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). Cisco UCS 6200 and 6300 Fabric Interconnect devices are affected in versions prior to 3.2(2b).

A vulnerability in the TCP proxy functionality for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to an error in TCP-based packet inspection, which could cause the TCP packet to have an invalid Layer 2 (L2)-formatted header. An attacker could exploit this vulnerability by sending a crafted TCP packet sequence to the targeted device. A successful exploit could allow the attacker to cause a DoS condition.

Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(20), 7.3(2)D1(1), and 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). UCS 6200 and 6300 Fabric Interconnect are affected in versions prior to 3.2(2b).

A vulnerability in the email parsing module Clam AntiVirus (ClamAV) Software versions 0.102.0, 0.101.4 and prior could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to inefficient MIME parsing routines that result in extremely long scan times of specially formatted email files. An attacker could exploit this vulnerability by sending a crafted email file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process to scan the crafted email file indefinitely, resulting in a denial of service condition.

A vulnerability in the Secure Shell (SSH) session management for Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the SSH process is not properly deleted when an SSH connection to the device is disconnected. An attacker could exploit this vulnerability by repeatedly opening SSH connections to an affected device. A successful exploit could allow the attacker to exhaust system resources by initiating multiple SSH connections to the device that are not effectively terminated, which could result in a DoS condition.

Multiple vulnerabilities in the video service of Cisco TelePresence Collaboration Endpoint (CE) and Cisco RoomOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by sending crafted traffic to the video service of an affected endpoint. A successful exploit could allow the attacker to cause the video service to crash, resulting in a DoS condition on an affected device.

A vulnerability in the Point-to-Point Tunneling Protocol (PPTP) VPN packet processing functionality in Cisco Aironet Access Points (APs) could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Generic Routing Encapsulation (GRE) frames that pass through the data plane of an affected AP. An attacker could exploit this vulnerability by associating to a vulnerable AP, initiating a PPTP VPN connection to an arbitrary PPTP VPN server, and sending a malicious GRE frame through the data plane of the AP. A successful exploit could allow the attacker to cause an internal process of the targeted AP to crash, which in turn would cause the AP to reload. The AP reload would cause a DoS condition for clients that are associated with the AP.

Cisco PIX firewall 5.x.x, and 6.3.1 and earlier, allows remote attackers to cause a denial of service (crash and reload) via an SNMPv3 message when snmp-server is set.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 7.0 through 7.2 before 7.2(5.7), 8.0 before 8.0(5.27), 8.1 before 8.1(2.53), 8.2 before 8.2(5.8), 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.2) and the Firewall Services Module (FWSM) 3.1 and 3.2 before 3.2(23) and 4.0 and 4.1 before 4.1(8) in Cisco Catalyst 6500 series devices, when multicast routing is enabled, allow remote attackers to cause a denial of service (device reload) via a crafted IPv4 PIM message, aka Bug IDs CSCtr47517 and CSCtu97367.

Cisco IOS 12.2 through 12.4 and 15.0 through 15.6 and IOS XE 3.1 through 3.17 and 16.2 allow remote attackers to cause a denial of service (device reload) via crafted fields in an H.323 message, aka Bug ID CSCux04257.

Cisco IOS 12.2 and IOS XE 3.14 through 3.16 and 16.1 allow remote attackers to cause a denial of service (device reload) via crafted IP Detail Record (IPDR) packets, aka Bug ID CSCuu35089.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.4 before 8.4(2.11) and 8.5 before 8.5(1.4) allow remote attackers to cause a denial of service (device reload) via (1) IPv4 or (2) IPv6 packets that trigger syslog message 305006, aka Bug ID CSCts39634.

Cisco ACE30 Application Control Engine Module through A5 3.3 and ACE 4700 Application Control Engine appliances through A5 3.3 allow remote attackers to cause a denial of service (device reload) via crafted (1) SSL or (2) TLS packets, aka Bug ID CSCvb16317.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop scanning and forwarding email messages due to a denial of service (DoS) condition. Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter or content filter to incoming email attachments. The vulnerability is not limited to any specific rules or actions for a message filter or content filter. More Information: CSCuz63143. Known Affected Releases: 8.5.7-042 9.7.0-125. Known Fixed Releases: 10.0.0-125 9.1.1-038 9.7.2-047.

Cisco IOS 15.5(3)S3, 15.6(1)S2, 15.6(2)S1, and 15.6(2)T1 does not properly dequeue invalid NTP packets, which allows remote attackers to cause a denial of service (interface wedge) by sending many crafted NTP packets, aka Bug ID CSCva35619.

A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an unauthenticated, remote attacker to cause the web-based management interface to unexpectedly restart. The vulnerability is due to insufficient input validation on the web-based management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to cause the interface to restart, resulting in a denial of service (DoS) condition.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.Affected Products: This vulnerability affects all releases prior to the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter that contains certain rules. More Information: CSCux59873. Known Affected Releases: 8.5.6-106 9.1.0-032 9.7.0-125. Known Fixed Releases: 9.1.1-038 9.7.1-066.

Cisco AsyncOS before 8.5.3-069 and 8.6 through 8.8 on Web Security Appliance (WSA) devices mishandles memory allocation for HTTP requests, which allows remote attackers to cause a denial of service (proxy-process reload) via a crafted request, aka Bug ID CSCuu02529.

The Locator/ID Separation Protocol (LISP) implementation in Cisco IOS 15.1 and 15.2 and NX-OS 4.1 through 6.2 allows remote attackers to cause a denial of service (device reload) via a crafted header in a packet, aka Bug ID CSCuu64279.

A vulnerability in the FTP inspection engine of Cisco Adaptive Security (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of FTP data. An attacker could exploit this vulnerability by sending malicious FTP traffic through an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

Cisco Wireless LAN Controller (WLC) Software 7.4 before 7.4.130.0(MD) and 7.5, 7.6, and 8.0 before 8.0.110.0(ED) allows remote attackers to cause a denial of service (device reload) via crafted Bonjour traffic, aka Bug ID CSCur66908.

A vulnerability in the Raw Socket Transport feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper parsing of Raw Socket Transport payloads. An attacker could exploit this vulnerability by establishing a TCP session and then sending a malicious TCP segment via IPv4 to an affected device. This cannot be exploited via IPv6, as the Raw Socket Transport feature does not support IPv6 as a network layer protocol.

goform/Docsis_system on Cisco EPC3928 devices allows remote attackers to cause a denial of service (device crash) via a long LanguageSelect parameter, related to a "Gateway HTTP Corruption Denial of Service" issue, aka Bug ID CSCuy28100.

A vulnerability in the FTP application layer gateway (ALG) functionality used by Network Address Translation (NAT), NAT IPv6 to IPv4 (NAT64), and the Zone-Based Policy Firewall (ZBFW) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a buffer overflow that occurs when an affected device inspects certain FTP traffic. An attacker could exploit this vulnerability by performing a specific FTP transfer through the device. A successful exploit could allow the attacker to cause the device to reload.

Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) do not properly handle Online Certificate Status Protocol (OCSP) connection failures, which allows remote OCSP responders to cause a denial of service (TCP socket exhaustion) by rejecting connection attempts, aka Bug ID CSCsz36816.

A vulnerability in the Cisco TrustSec (CTS) Protected Access Credential (PAC) provisioning module of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of attributes in RADIUS messages. An attacker could exploit this vulnerability by sending a malicious RADIUS message to an affected device while the device is in a specific state.

A vulnerability in Unified Threat Defense (UTD) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper validation of IPv6 packets through the UTD feature. An attacker could exploit this vulnerability by sending IPv6 traffic through an affected device that is configured with UTD. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

Cisco AsyncOS 8.0 before 8.0.6-119 on Web Security Appliance (WSA) devices allows remote attackers to cause a denial of service (proxy-process hang) via a crafted HTTP POST request, aka Bug ID CSCuo12171.

A vulnerability in the IOx application environment of multiple Cisco platforms could allow an unauthenticated, remote attacker to cause the IOx web server to stop processing HTTPS requests, resulting in a denial of service (DoS) condition. The vulnerability is due to a Transport Layer Security (TLS) implementation issue. An attacker could exploit this vulnerability by sending crafted TLS packets to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing HTTPS requests, resulting in a DoS condition.

A vulnerability in the RADIUS Change of Authorization (CoA) code of Cisco TrustSec, a feature within Cisco IOS XE Software, could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of a malformed packet. An attacker could exploit this vulnerability by sending a malformed packet to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.7(3)S11 allows remote attackers to cause a denial of service (device crash) via a malformed packet, aka Bug ID CSCsk32606.

The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.7(3)S10 allows remote attackers to cause a denial of service (device crash) via a malformed session attribute, aka Bug ID CSCsk40030.

The MGCP implementation on the Cisco PGW 2200 Softswitch with software before 9.7(3)S11 allows remote attackers to cause a denial of service (device crash) via a malformed packet, aka Bug ID CSCsl39126.

A vulnerability in the Cisco Encrypted Traffic Analytics (ETA) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a logic error that exists when handling a malformed incoming packet, leading to access to an internal data structure after it has been freed. An attacker could exploit this vulnerability by sending crafted, malformed IP packets to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition.

The SIP implementation in Cisco TelePresence TC Software 4.x and 5.x and TE Software 4.x and 6.0 allows remote attackers to cause a denial of service (device reload) via crafted SIP packets, aka Bug ID CSCtq72699.

The IPv6 snooping functionality in the first-hop security subsystem in Cisco IOS 12.2, 15.0, 15.1, 15.2, 15.3, 15.4, and 15.5 and IOS XE 3.2SE, 3.3SE, 3.3XO, 3.4SG, 3.5E, and 3.6E before 3.6.3E; 3.7E before 3.7.2E; 3.9S and 3.10S before 3.10.6S; 3.11S before 3.11.4S; 3.12S and 3.13S before 3.13.3S; and 3.14S before 3.14.2S does not properly implement the Control Plane Protection (aka CPPr) feature, which allows remote attackers to cause a denial of service (device reload) via a flood of ND packets, aka Bug ID CSCus19794.

The IPv6 snooping functionality in the first-hop security subsystem in Cisco IOS 12.2, 15.0, 15.1, 15.2, 15.3, 15.4, and 15.5 and IOS XE 3.2SE, 3.3SE, 3.3XO, 3.4SG, 3.5E, and 3.6E before 3.6.3E; 3.7E before 3.7.2E; 3.9S and 3.10S before 3.10.6S; 3.11S before 3.11.4S; 3.12S and 3.13S before 3.13.3S; and 3.14S before 3.14.2S allows remote attackers to cause a denial of service (device reload) via a malformed ND packet with the Cryptographically Generated Address (CGA) option, aka Bug ID CSCuo04400.

The XML parser in Cisco Adaptive Security Appliance (ASA) Software 8.4 before 8.4(7.28), 8.6 before 8.6(1.17), 9.0 before 9.0(4.33), 9.1 before 9.1(6), 9.2 before 9.2(3.4), and 9.3 before 9.3(3), when Clientless SSL VPN, AnyConnect SSL VPN, or AnyConnect IKEv2 VPN is used, allows remote attackers to cause a denial of service (VPN outage or device reload) via a crafted XML document, aka Bug ID CSCus95290.

Cisco IOS 12.2, 12.4, 15.0, 15.1, 15.2, 15.3, and 15.4 and IOS XE 2.5.x, 2.6.x, 3.1.xS through 3.12.xS before 3.12.3S, 3.2.xE through 3.7.xE before 3.7.1E, 3.3.xSG, 3.4.xSG, and 3.13.xS before 3.13.2S allow remote attackers to cause a denial of service (device reload) by sending malformed IKEv2 packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCum36951.

AppNav in Cisco IOS XE 3.8 through 3.10 before 3.10.3S, 3.11 before 3.11.3S, 3.12 before 3.12.1S, 3.13 before 3.13.0S, 3.14 before 3.14.0S, and 3.15 before 3.15.0S allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via a crafted TCP packet, aka Bug ID CSCuo53622.

Cisco IOS XE before 3.7.5S on ASR 1000 devices does not properly handle route adjacencies, which allows remote attackers to cause a denial of service (device hang) via crafted IP packets, aka Bug ID CSCub31873.