Cisco IOS XE 2.x and 3.x before 3.4.5S, and 3.5 through 3.7 before 3.7.1S, on 1000 series Aggregation Services Routers (ASR) allows remote attackers to cause a denial of service (card reload) by sending many crafted L2TP packets, aka Bug ID CSCtz23293.

The SIP Proxy (SIPD) service in Cisco Unified Presence before 6.0(3) allows remote attackers to cause a denial of service (core dump and service interruption) via a TCP port scan, aka Bug ID CSCsj64533.

The IP stack in Cisco Intrusion Prevention System (IPS) Software in ASA 5500-X IPS-SSP software and hardware modules before 7.1(5)E4, IPS 4500 sensors before 7.1(6)E4, and IPS 4300 sensors before 7.1(5)E4 allows remote attackers to cause a denial of service (MainApp process hang) via malformed IPv4 packets, aka Bug ID CSCtx18596.

The SNMP Trap Agent service in Cisco Unified Communications Manager (CUCM) 4.1 before 4.1(3)SR6, 4.2 before 4.2(3)SR3, 4.3 before 4.3(2), 5.x before 5.1(3), and 6.x before 6.1(1) allows remote attackers to cause a denial of service (core dump and service restart) via a series of malformed UDP packets, as demonstrated by the IP Stack Integrity Checker (ISIC), aka Bug ID CSCsj24113.

Cisco Unified Communications Manager (CUCM) 8.6 before 8.6(2a)su2, 8.6 BE3k before 8.6(4) BE3k, and 9.x before 9.0(1) allows remote attackers to cause a denial of service (CPU consumption and GUI and voice outages) via malformed packets to unused UDP ports, aka Bug ID CSCtx43337.

Memory leak in the Certificate Trust List (CTL) Provider service in Cisco Unified Communications Manager (CUCM) 5.x before 5.1(3) allows remote attackers to cause a denial of service (memory consumption and service interruption) via a series of malformed TCP packets, as demonstrated by TCPFUZZ, aka Bug ID CSCsj80609.

The Presence Engine (PE) service in Cisco Unified Presence before 6.0(1) allows remote attackers to cause a denial of service (core dump and service interruption) via an unspecified "stress test," aka Bug ID CSCsh20972.

Memory leak in the Certificate Trust List (CTL) Provider service in Cisco Unified Communications Manager (CUCM) 5.x before 5.1(3) and 6.x before 6.1(1) allows remote attackers to cause a denial of service (memory consumption and service interruption) via a series of malformed TCP packets, aka Bug ID CSCsi98433.

The management API in the XML API management service in the Manager component in Cisco Unified Computing System (UCS) 1.x before 1.2(1b) allows remote attackers to cause a denial of service (service outage) via a malformed request, aka Bug ID CSCtg48206.

The data-link switching (DLSw) component in Cisco IOS 12.0 through 12.4 allows remote attackers to cause a denial of service (device restart or memory consumption) via crafted (1) UDP port 2067 or (2) IP protocol 91 packets.

A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a large number of TCP packets to a specific port on an affected device. A successful exploit could allow the attacker to exhaust system memory, which could cause the device to reload unexpectedly. No manual intervention is needed to recover the device after it has reloaded.

Multiple vulnerabilities in the Zone-Based Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload or stop forwarding traffic through the firewall. The vulnerabilities are due to incomplete handling of Layer 4 packets through the device. An attacker could exploit these vulnerabilities by sending a certain sequence of traffic patterns through the device. A successful exploit could allow the attacker to cause the device to reload or stop forwarding traffic through the firewall, resulting in a denial of service. For more information about these vulnerabilities, see the Details section of this advisory.

Buffer overflow in Cisco Unified MeetingPlace Web Conferencing before 7.1MR1 Patch 1, 8.0 before 8.0MR1 Patch 1, and 8.5 before 8.5MR3 allows remote attackers to cause a denial of service (daemon hang) via unspecified parameters in a POST request, aka Bug ID CSCua66341.

A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072.

Multiple Cisco products are affected by a vulnerability in the way the Snort detection engine processes ICMP traffic that could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper memory resource management while the Snort detection engine is processing ICMP packets. An attacker could exploit this vulnerability by sending a series of ICMP packets through an affected device. A successful exploit could allow the attacker to exhaust resources on the affected device, causing the device to reload.

A vulnerability in SSL/TLS message handler for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incoming SSL/TLS packets are not properly processed. An attacker could exploit this vulnerability by sending a crafted SSL/TLS packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243.

A vulnerability in the TCP throttling process for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to cause the system to consume additional memory, eventually forcing the device to restart, aka Memory Exhaustion. The vulnerability is due to insufficient rate-limiting protection. An attacker could exploit this vulnerability by sending a high rate of TCP packets to a specific group of open listening ports on a targeted device. An exploit could allow the attacker to cause the system to consume additional memory. If enough available memory is consumed, the system will restart, creating a temporary denial of service (DoS) condition. The DoS condition will end after the device has finished the restart process. This vulnerability affects the following Cisco products: Connected Grid Network Management System, if running a software release prior to IoT-FND Release 4.0; IoT Field Network Director, if running a software release prior to IoT-FND Release 4.0. Cisco Bug IDs: CSCvc77164.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) Discovery Request parsing functionality of Cisco Wireless LAN Controllers could allow an unauthenticated, remote attacker to cause an affected device to restart unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of fields in CAPWAP Discovery Request packets by the affected device. An attacker could exploit this vulnerability by sending crafted CAPWAP Discovery Request packets to an affected device. A successful exploit could allow the attacker to cause the affected device to restart unexpectedly, resulting in a DoS condition. Cisco Bug IDs: CSCvb95842.

Cisco Unified Communications Manager (CUCM) with software 6.x and 7.x before 7.1(5b)su5, 8.0 before 8.0(3a)su3, and 8.5 and 8.6 before 8.6(2a)su1 and Cisco Business Edition 3000 with software before 8.6.3 and 5000 and 6000 with software before 8.6(2a)su1 allow remote attackers to cause a denial of service (device reload) via a crafted SCCP registration, aka Bug ID CSCtu73538.

Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc43709.

A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063.

Multiple vulnerabilities in the implementation of the Common Industrial Protocol (CIP) feature in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of crafted CIP packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted CIP packets to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuz95334.

The SIP inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.2 before 8.2(5.17), 8.3 before 8.3(2.28), 8.4 before 8.4(2.13), 8.5 before 8.5(1.4), and 8.6 before 8.6(1.5) allows remote attackers to cause a denial of service (device reload) via a crafted SIP media-update packet, aka Bug ID CSCtr63728.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for the Cisco Email Security Appliance could allow an unauthenticated, remote attacker to cause an affected device to run out of memory and stop scanning and forwarding email messages. When system memory is depleted, it can cause the filtering process to crash, resulting in a denial of service (DoS) condition on the device. This vulnerability affects software version 9.0 through the first fixed release of Cisco AsyncOS Software for Cisco Email Security Appliances, both virtual and hardware appliances, if the software is configured to apply a message filter or content filter to incoming email attachments. The vulnerability is not limited to any specific rules or actions for a message filter or content filter. Cisco Bug IDs: CSCvd29354.

Cisco IOS 12.2 and 15.0 through 15.2 on Cisco 10000 series routers, when a tunnel interface exists, allows remote attackers to cause a denial of service (interface queue wedge) via tunneled (1) GRE/IP, (2) IPIP, or (3) IPv6 in IPv4 packets, aka Bug ID CSCts66808.

The SIP implementation in Cisco Unified Communications Manager (CUCM) 6.x and 7.x before 7.1(5b)su5, 8.x before 8.5(1)su4, and 8.6 before 8.6(2a)su1; Cisco IOS 12.2 through 12.4 and 15.0 through 15.2; and Cisco IOS XE 3.3.xSG before 3.3.1SG, 3.4.xS, and 3.5.xS allows remote attackers to cause a denial of service (service crash or device reload) via a crafted SIP message containing an SDP session description, aka Bug IDs CSCtw66721, CSCtj33003, and CSCtw84664.

A vulnerability in the web management interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a missing internal handler for the specific request. An attacker could exploit this vulnerability by accessing a specific hidden URL on the GUI web management interface. A successful exploit could allow the attacker to cause a reload of the device, resulting in a DoS condition. This vulnerability affects only the Cisco Wireless LAN Controller 8.3.102.0 release. Cisco Bug IDs: CSCvb48198.

The Presence Engine (PE) service in Cisco Unified Presence before 6.0(1) allows remote attackers to cause a denial of service (core dump and service interruption) via malformed packets, aka Bug ID CSCsh50164.

The SIP ALG feature in the NAT implementation in Cisco IOS 12.2, 12.4, and 15.0 through 15.2 allows remote attackers to cause a denial of service (device reload) via transit IP packets, aka Bug ID CSCtn76183.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493.

Memory leak in Cisco Content Switching Module (CSM) 4.2(3) up to 4.2(8) and Cisco Content Switching Module with SSL (CSM-S) 2.1(2) up to 2.1(7) allows remote attackers to cause a denial of service (memory consumption) via TCP segments with an unspecified combination of TCP flags.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut50727.

The DHCPv6 server in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x, 3.1.xS before 3.1.4S, 3.1.xSG and 3.2.xSG before 3.2.5SG, 3.2.xS, 3.2.xXO, 3.3.xS, and 3.3.xSG before 3.3.1SG allows remote attackers to cause a denial of service (device reload) via a malformed DHCPv6 packet, aka Bug ID CSCto57723.

Cisco Unified Presence (CUP) before 8.6(3) and Jabber Extensible Communications Platform (aka Jabber XCP) before 5.3 allow remote attackers to cause a denial of service (process crash) via a crafted XMPP stream header, aka Bug ID CSCtu32832.

A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.4 before 8.4(4.1), 8.5 before 8.5(1.11), and 8.6 before 8.6(1.3) allow remote attackers to cause a denial of service (device reload) via IPv6 transit traffic that triggers syslog message 110003, aka Bug ID CSCua27134.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331.

A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353.

A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892.

Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2 and 8.4, when SIP inspection is enabled, create many identical pre-allocated secondary pinholes, which might allow remote attackers to cause a denial of service (CPU consumption) via crafted SIP traffic, aka Bug ID CSCtz63143.

Cisco IOS XR before 4.2.1 on ASR 9000 series devices and CRS series devices allows remote attackers to cause a denial of service (packet transmission outage) via a crafted packet, aka Bug IDs CSCty94537 and CSCtz62593.

The WAAS Express feature in Cisco IOS 15.1 and 15.2 allows remote attackers to cause a denial of service (memory consumption or device reload) via crafted transit traffic, aka Bug ID CSCtt45381.

Unspecified vulnerability in Cisco Unified Communications Manager 4.1 before 4.1(3)SR6, 4.2 before 4.2(3)SR3, 4.3 before 4.3(2), 5.x before 5.1(3), and 6.x before 6.1(1) allows remote attackers to cause a denial of service (CCM service restart) via an unspecified SIP INVITE message, aka Bug ID CSCsk46944.

Memory leak in the Zone-Based Firewall in Cisco IOS 12.4, 15.0, 15.1, and 15.2 allows remote attackers to cause a denial of service (memory consumption or device reload) via crafted IP packets, aka Bug ID CSCto89536.

Cisco Wireless LAN Controller (WLC) devices with software 6.0 and 7.0 before 7.0.220.0, 7.1 before 7.1.91.0, and 7.2 before 7.2.103.0 allow remote attackers to cause a denial of service (device reload) via a sequence of IPv6 packets, aka Bug ID CSCtt07949.

The Cisco Cius with software before 9.2(1) SR2 allows remote attackers to cause a denial of service (device crash or hang) via malformed network traffic, aka Bug ID CSCto71445.

The administrative management interface on Cisco Wireless LAN Controller (WLC) devices with software 4.x, 5.x, 6.0, and 7.0 before 7.0.220.0, 7.1 before 7.1.91.0, and 7.2 before 7.2.103.0 allows remote attackers to cause a denial of service (device crash) via a malformed URL in an HTTP request, aka Bug ID CSCts81997.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit the vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

The Smart Install feature in Cisco IOS 12.2, 15.0, 15.1, and 15.2 allows remote attackers to cause a denial of service (device reload) by sending a malformed Smart Install message over TCP, aka Bug ID CSCtt16051.