Pexip Infinity before 20.1 allows privilege escalation by restoring a system backup.

jsdm/ajax/port.php in J-Web in Juniper Junos before 10.4R13, 11.4 before 11.4R7, 12.1 before 12.1R5, 12.2 before 12.2R3, and 12.3 before 12.3R1 allows remote authenticated users to execute arbitrary commands via the rsargs parameter in an exec action.

An authenticated command injection vulnerability exists in the Archer BE450 v1 and BE7200 v1 router that allows an administrator to execute arbitrary system commands through the web management interface. After successfully authenticating to the admin interface, an attacker can leverage the browser’s developer console by supplying a crafted input that is passed to backend system commands without adequate sanitization. Successful exploitation enables execution of arbitrary commands with elevated privileges on the device, which may allow the attacker to start unauthorized services, modify system configuration, or otherwise fully compromise the router’s operating environment.

ServerAdmin/TestTelnetConnection.jsp in DS3 Authentication Server allows remote authenticated users to execute arbitrary commands via shell metacharacters in the HOST_NAME field.

A remote code exection vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

IBM Security Privileged Identity Manager Virtual Appliance 2.2.1 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 144580.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute code with root-level privileges on the underlying operating system. This vulnerability exist because the software improperly validates user-supplied input. An attacker could exploit this vulnerability by uploading a malicious file to the administrative web interface. A successful exploit could allow the attacker to execute code with root-level privileges on the underlying operating system.

A vulnerability in the REST API for software device management in Cisco Application Policy Infrastructure Controller (APIC) Software could allow an authenticated, remote attacker to escalate privileges to root on an affected device. The vulnerability is due to incomplete validation and error checking for the file path when specific software is uploaded. An attacker could exploit this vulnerability by uploading malicious software using the REST API. A successful exploit could allow an attacker to escalate their privilege level to root. The attacker would need to have the administrator role on the device.

A vulnerability in the software update feature of Cisco Industrial Network Director could allow an authenticated, remote attacker to execute arbitrary code. The vulnerability is due to improper validation of files uploaded to the affected application. An attacker could exploit this vulnerability by authenticating to the affected system using administrator privileges and uploading an arbitrary file. A successful exploit could allow the attacker to execute arbitrary code with elevated privileges.

The database backup feature in upload/source/admincp/admincp_db.php in Discuz! 2.5 and 3.4 allows remote attackers to execute arbitrary PHP code.

Improper Input Validation vulnerability in Saturday Drive Ninja Forms Contact Form.This issue affects Ninja Forms Contact Form : from n/a through 3.6.24.

A vulnerability in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying a crafted input parameter on a form in the Web UI and then submitting that form. A successful exploit could allow the attacker to run arbitrary commands on the device with root privileges, which may lead to complete system compromise.

Chamilo LMS v1.11.13 lacks validation on the user modification form, allowing attackers to escalate privileges to Platform Admin.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an authenticated, remote attacker to execute arbitrary commands on the underlying Linux shell as the root user. Exploitation of this vulnerability requires privileged access to an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by logging in to the web-based management interface with administrator privileges and then sending a malicious request to a certain part of the interface.

source-to-image component of Openshift Container Platform before versions atomic-openshift 3.7.53, atomic-openshift 3.9.31 is vulnerable to a privilege escalation which allows the assemble script to run as the root user in a non-privileged container. An attacker can use this flaw to open network connections, and possibly other actions, on the host which are normally only available to a root user.

A vulnerability in the web-based management interface of Cisco Prime Infrastructure (PI) and Cisco Evolved Programmable Network (EPN) Manager could allow an authenticated, remote attacker to execute code with root-level privileges on the underlying operating system. This vulnerability exist because the software improperly validates user-supplied input. An attacker could exploit this vulnerability by uploading a malicious file to the administrative web interface. A successful exploit could allow the attacker to execute code with root-level privileges on the underlying operating system.

A vulnerability in Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker with administrator privileges to overwrite or read arbitrary files on the underlying operating system (OS) of an affected device. The vulnerability is due to improper input validation in NFVIS filesystem commands. An attacker could exploit this vulnerability by using crafted variables during the execution of an affected command. A successful exploit could allow the attacker to overwrite or read arbitrary files on the underlying OS.

A vulnerability in the Secure Copy Protocol (SCP) server of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to access the shell of the underlying Linux operating system on the affected device. The vulnerability is due to improper input validation of command arguments. An attacker could exploit this vulnerability by using crafted arguments when opening a connection to the affected device. An exploit could allow the attacker to gain shell access with a non-root user account to the underlying Linux operating system on the affected device. Due to the system design, access to the Linux shell could allow execution of additional attacks that may have a significant impact on the affected system. This vulnerability affects Cisco devices that are running release 3.7.1, 3.6.3, or earlier releases of Cisco Enterprise NFV Infrastructure Software (NFVIS) when access to the SCP server is allowed on the affected device. Cisco NFVIS Releases 3.5.x and 3.6.x do allow access to the SCP server by default, while Cisco NFVIS Release 3.7.1 does not. Cisco Bug IDs: CSCvh25026.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to send a malicious packet to the management interface on an affected system and execute a command-injection exploit. The vulnerability is due to incorrect input validation of user-supplied data to the NX-API subsystem. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. Note: NX-API is disabled by default. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd47415, CSCve03216, CSCve03224, CSCve03234.

A vulnerability in the configuration and management database of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary commands with the privileges of the vmanage user in the configuration management system of the affected software. The vulnerability is due to insufficient validation of command arguments that are passed to the configuration and management database of the affected software. An attacker could exploit this vulnerability by creating custom functions that contain malicious code and are executed as the vmanage user of the configuration management system. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the vmanage user in the configuration management system of the affected software. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69937.

Grav is a flat-file content management system. Prior to version 1.7.42, the patch for CVE-2022-2073, a server-side template injection vulnerability in Grav leveraging the default `filter()` function, did not block other built-in functions exposed by Twig's Core Extension that could be used to invoke arbitrary unsafe functions, thereby allowing for remote code execution. A patch in version 1.74.2 overrides the built-in Twig `map()` and `reduce()` filter functions in `system/src/Grav/Common/Twig/Extension/GravExtension.php` to validate the argument passed to the filter in `$arrow`.

A vulnerability in the CLI parser of Cisco Network Services Orchestrator (NSO) could allow an authenticated, remote attacker to execute arbitrary shell commands with the privileges of the root user. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting malicious arguments into vulnerable commands. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected system. This vulnerability affects the following releases of Cisco Network Services Orchestrator (NSO): 4.1 through 4.1.6.0, 4.2 through 4.2.4.0, 4.3 through 4.3.3.0, 4.4 through 4.4.2.0. Cisco Bug IDs: CSCvf99982.

A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability.

A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the save command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the save command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user.

A vulnerability in the Web Services Management Agent (WSMA) function of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary Cisco IOS commands as a privilege level 15 user. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker could exploit this vulnerability by submitting crafted HTTP requests to the targeted application. A successful exploit could allow the attacker to execute arbitrary commands on the affected device.

An attacker who has the privilege to configure Zabbix items can use function icmpping() with additional malicious command inside it to execute arbitrary code on the current Zabbix server.

A vulnerability in Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying a username with a malicious payload in the web UI and subsequently making a request to a specific endpoint in the web UI. A successful exploit could allow the attacker to run arbitrary commands as the root user, allowing complete compromise of the system.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated but unprivileged (level 1), remote attacker to run privileged Cisco IOS commands by using the web UI. The vulnerability is due to a failure to validate and sanitize input in Web Services Management Agent (WSMA) functions. An attacker could exploit this vulnerability by submitting a malicious payload to the affected device's web UI. A successful exploit could allow the lower-privileged attacker to execute arbitrary commands with higher privileges on the affected device.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.3 E0504P4 was found.

A vulnerability in the authorization subsystem of Cisco IOS XE Software could allow an authenticated but unprivileged (level 1), remote attacker to run privileged Cisco IOS commands by using the web UI. The vulnerability is due to improper validation of user privileges of web UI users. An attacker could exploit this vulnerability by submitting a malicious payload to a specific endpoint in the web UI. A successful exploit could allow the lower-privileged attacker to execute arbitrary commands with higher privileges on the affected device.

SquirrelMail 1.4.22 (and other versions before 20170427_0200-SVN) allows post-authentication remote code execution via a sendmail.cf file that is mishandled in a popen call. It's possible to exploit this vulnerability to execute arbitrary shell commands on the remote server. The problem is in the Deliver_SendMail.class.php with the initStream function that uses escapeshellcmd() to sanitize the sendmail command before executing it. The use of escapeshellcmd() is not correct in this case since it doesn't escape whitespaces, allowing the injection of arbitrary command parameters. The problem is in -f$envelopefrom within the sendmail command line. Hence, if the target server uses sendmail and SquirrelMail is configured to use it as a command-line program, it's possible to trick sendmail into using an attacker-provided configuration file that triggers the execution of an arbitrary command. For exploitation, the attacker must upload a sendmail.cf file as an email attachment, and inject the sendmail.cf filename with the -C option within the "Options > Personal Informations > Email Address" setting.

A vulnerability in the web-based management interface of certain Cisco Small Business RV Series Routers could allow an authenticated, remote attacker with administrative privileges to inject arbitrary commands into the underlying operating system. When processed, the commands will be executed with root privileges. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by providing malicious input to a specific field in the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as the root user.

OpenText Documentum Content Server allows superuser access via sys_obj_save or save of a crafted object, followed by an unauthorized "UPDATE dm_dbo.dm_user_s SET user_privileges=16" command, aka an "RPC save-commands" attack. NOTE: this vulnerability exists because of an incomplete fix for CVE-2015-4532.

An authenticated user of Unitrends Enterprise Backup before 9.1.2 can execute arbitrary OS commands by sending a specially crafted filename to the /api/restore/download-files endpoint, related to the downloadFiles function in api/includes/restore.php.

Adobe Commerce versions 2.4.7, 2.4.6-p5, 2.4.5-p7, 2.4.4-p8 and earlier are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue does not require user interaction, but admin privileges are required.

A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.

pmmasterd in Quest Privilege Manager before 6.0.0.061, when configured as a policy server, allows remote attackers to write to arbitrary files and consequently execute arbitrary code with root privileges via an ACT_NEWFILESENT action.

Adobe Commerce versions 2.4.7, 2.4.6-p5, 2.4.5-p7, 2.4.4-p8 and earlier are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue does not require user interaction, but admin privileges are required and scope is changed.

InstantCMS is a free and open source content management system. A SQL injection vulnerability affects instantcms v2.16.2 in which an attacker with administrative privileges can cause the application to execute unauthorized SQL code. The vulnerability exists in index_chart_data action, which receives an input from user and passes it unsanitized to the core model `filterFunc` function that further embeds this data in an SQL statement. This allows attackers to inject unwanted SQL code into the statement. The `period` should be escaped before inserting it in the query. As of time of publication, a patched version is not available.

A vulnerability in the web-based management interface of Cisco Webex Video Mesh could allow an authenticated, remote attacker to execute arbitrary commands on the affected system. The vulnerability is due to improper validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by logging in to the web-based management interface with administrative privileges and supplying crafted requests to the application. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges on a targeted node.

A command injection vulnerability was identified in GitHub Enterprise Server that allowed an attacker with an editor role in the Management Console to gain admin SSH access to the appliance when configuring GeoJSON settings. Exploitation of this vulnerability required access to the GitHub Enterprise Server instance and access to the Management Console with the editor role. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.13 and was fixed in versions 3.8.17, 3.9.12, 3.10.9, 3.11.7, and 3.12.1. This vulnerability was reported via the GitHub Bug Bounty program.

A Remote Arbitrary Code Execution vulnerability in HPE Intelligent Management Center (IMC) PLAT version 7.2 E0403P06 was found.

A vulnerability has been identified in RUGGEDCOM RM1224 LTE(4G) EU (6GK6108-4AM00-2BA2) (All versions < V8.2), RUGGEDCOM RM1224 LTE(4G) NAM (6GK6108-4AM00-2DA2) (All versions < V8.2), SCALANCE M804PB (6GK5804-0AP00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1AA00-2AA2) (All versions < V8.2), SCALANCE M812-1 ADSL-Router (6GK5812-1BA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1AA00-2AA2) (All versions < V8.2), SCALANCE M816-1 ADSL-Router (6GK5816-1BA00-2AA2) (All versions < V8.2), SCALANCE M826-2 SHDSL-Router (6GK5826-2AB00-2AB2) (All versions < V8.2), SCALANCE M874-2 (6GK5874-2AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 (6GK5874-3AA00-2AA2) (All versions < V8.2), SCALANCE M874-3 3G-Router (CN) (6GK5874-3AA00-2FA2) (All versions < V8.2), SCALANCE M876-3 (6GK5876-3AA02-2BA2) (All versions < V8.2), SCALANCE M876-3 (ROK) (6GK5876-3AA02-2EA2) (All versions < V8.2), SCALANCE M876-4 (6GK5876-4AA10-2BA2) (All versions < V8.2), SCALANCE M876-4 (EU) (6GK5876-4AA00-2BA2) (All versions < V8.2), SCALANCE M876-4 (NAM) (6GK5876-4AA00-2DA2) (All versions < V8.2), SCALANCE MUM853-1 (A1) (6GK5853-2EA10-2AA1) (All versions < V8.2), SCALANCE MUM853-1 (B1) (6GK5853-2EA10-2BA1) (All versions < V8.2), SCALANCE MUM853-1 (EU) (6GK5853-2EA00-2DA1) (All versions < V8.2), SCALANCE MUM856-1 (A1) (6GK5856-2EA10-3AA1) (All versions < V8.2), SCALANCE MUM856-1 (B1) (6GK5856-2EA10-3BA1) (All versions < V8.2), SCALANCE MUM856-1 (CN) (6GK5856-2EA00-3FA1) (All versions < V8.2), SCALANCE MUM856-1 (EU) (6GK5856-2EA00-3DA1) (All versions < V8.2), SCALANCE MUM856-1 (RoW) (6GK5856-2EA00-3AA1) (All versions < V8.2), SCALANCE S615 EEC LAN-Router (6GK5615-0AA01-2AA2) (All versions < V8.2), SCALANCE S615 LAN-Router (6GK5615-0AA00-2AA2) (All versions < V8.2). Affected devices do not properly validate input in configuration fields of the iperf functionality. This could allow an unauthenticated remote attacker to execute arbitrary code on the device.

A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069.

SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. SuiteCRM relies on the blacklist of functions/methods to prevent installation of malicious MLPs. But this checks can be bypassed with some syntax constructions. SuiteCRM uses token_get_all to parse PHP scripts and check the resulted AST against blacklists. But it doesn't take into account all scenarios. This issue has been addressed in versions 7.14.6 and 8.7.1. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Improper Input Validation, Improper Control of Generation of Code ('Code Injection') vulnerability in Apache ActiveMQ, Apache ActiveMQ Broker, Apache ActiveMQ All. An authenticated attacker can use the admin web console page to construct a malicious broker name that bypasses name validation to include an xbean binding that can be later used by a VM transport to load a remote Spring XML application. The attacker can then use the DestinationView mbean to send a message to trigger a VM transport creation that will reference this malicious broker name which can lead to loading the malicious Spring XML context file. Because Spring's ResourceXmlApplicationContext instantiates all singleton beans before the BrokerService validates the configuration, arbitrary code execution occurs on the broker's JVM through bean factory methods such as Runtime.exec(). This issue affects Apache ActiveMQ: before 5.19.6, from 6.0.0 before 6.2.5; Apache ActiveMQ Broker: before 5.19.6, from 6.0.0 before 6.2.5; Apache ActiveMQ All: before 5.19.6, from 6.0.0 before 6.2.5. Users are recommended to upgrade to version 6.2.5 or 5.19.6, which fixes the issue.

mailcow: dockerized is an open source groupware/email suite based on docker. Versions prior to 2026-03b have a second-order SQL injection vulnerability in the quarantine_category field via the Mailcow API. The /api/v1/add/mailbox endpoint stores quarantine_category without validation or sanitization. This value is later used by quarantine_notify.py, which constructs SQL queries using unsafe % string formatting instead of parameterized queries. This results in a delayed (second-order) SQL injection when the quarantine notification job executes, allowing an attacker to inject arbitrary SQL. Using a UNION SELECT, sensitive data (e.g., admin credentials) can be exfiltrated and rendered inside quarantine notification emails. Version 2026-03b fixes the vulnerability.

An attacker who has gained access to an admin account can perform RCE via null-byte injection Vendor: The Apache Software Foundation Versions Affected: Apache OpenMeetings from 2.0.0 before 7.1.0

A flaw was found in the CloudForms management engine version 5.10 and CloudForms management version 5.11, which triggered remote code execution through NFS schedule backup. An attacker logged into the management console could use this flaw to execute arbitrary shell commands on the CloudForms server as root.

A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235.