The SSL VPN implementation in Cisco Adaptive Security Appliance (ASA) Software 8.2 before 8.2(5.47, 8.3 before 8.3(2.40), 8.4 before 8.4(7.3), 8.6 before 8.6(1.13), 9.0 before 9.0(3.8), and 9.1 before 9.1(3.2) allows remote attackers to bypass authentication via (1) a crafted cookie value within modified HTTP POST data or (2) a crafted URL, aka Bug ID CSCua85555.

The Real Time Monitoring Tool (RTMT) web application in Cisco Unified Communications Manager (Unified CM) 10.0(1) and earlier does not properly enforce authentication requirements, which allows remote attackers to read application files via a direct request to a URL, aka Bug ID CSCum46495.

The Cisco Unified IP Phone 7960G 9.2(1) and earlier allows remote attackers to bypass authentication and change trust relationships by injecting a Certificate Trust List (CTL) file, aka Bug ID CSCuj66795.

A vulnerability in the web application in the Cisco Prime Collaboration Provisioning tool could allow an unauthenticated, remote attacker to hijack another user's session. More Information: CSCvc90346. Known Affected Releases: 12.1.

A vulnerability in the authentication functionality of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to bypass authentication controls and log in to the device through the management interface This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and log in to the device as an administrator. The attacker could obtain privileges that are the same level as an administrative user but it depends on the crafted credentials. Note: This vulnerability exists because of a non-default device configuration that must be present for it to be exploitable. For details about the vulnerable configuration, see the Vulnerable Products section of this advisory.

A vulnerability in the IPSec VPN Server authentication functionality of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to bypass authentication controls and access the IPSec VPN network. This vulnerability is due to the improper implementation of the password validation algorithm. An attacker could exploit this vulnerability by logging in to the VPN from an affected device with crafted credentials. A successful exploit could allow the attacker to bypass authentication and access the IPSec VPN network. The attacker may obtain privileges that are the same level as an administrative user, depending on the crafted credentials that are used. Cisco has not released software updates that address this vulnerability.

A vulnerability in the smart card login authentication of Cisco Duo for macOS could allow an unauthenticated attacker with physical access to bypass authentication. This vulnerability exists because the assigned user of a smart card is not properly matched with the authenticating user. An attacker could exploit this vulnerability by configuring a smart card login to bypass Duo authentication. A successful exploit could allow the attacker to use any personal identity verification (PIV) smart card for authentication, even if the smart card is not assigned to the authenticating user.

A vulnerability in the CLI of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated to access the CLI. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in the API subsystem of Cisco Meetings App could allow an unauthenticated, remote attacker to retain and reuse the Traversal Using Relay NAT (TURN) server credentials that are configured in an affected system. The vulnerability is due to insufficient protection mechanisms for the TURN server credentials. An attacker could exploit this vulnerability by intercepting the legitimate traffic that is generated by an affected system. An exploit could allow the attacker to obtain the TURN server credentials, which the attacker could use to place audio/video calls and forward packets through the configured TURN server. The attacker would not be able to take control of the TURN server unless the same credentials were used in multiple systems.

A vulnerability in the Common Access Card (CAC) authentication feature of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass authentication and access the FMC system. The attacker must have a valid CAC to initiate the access attempt. The vulnerability is due to incorrect session invalidation during CAC authentication. An attacker could exploit this vulnerability by performing a CAC-based authentication attempt to an affected system. A successful exploit could allow the attacker to access an affected system with the privileges of a CAC-authenticated user who is currently logged in.

A vulnerability in Cisco DNA Center software could allow an unauthenticated remote attacker access to sensitive information on an affected system. The vulnerability is due to improper handling of authentication tokens by the affected software. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker access to sensitive device information, which includes configuration files.

A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.

A vulnerability in the TCP Intercept functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured Access Control Policies (including Geolocation) and Service Polices on an affected system. The vulnerability exists because TCP Intercept is invoked when the embryonic connection limit is reached, which can cause the underlying detection engine to process the packet incorrectly. An attacker could exploit this vulnerability by sending a crafted stream of traffic that matches a policy on which TCP Intercept is configured. A successful exploit could allow the attacker to match on an incorrect policy, which could allow the traffic to be forwarded when it should be dropped. In addition, the traffic could incorrectly be dropped.

A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, physical attacker to bypass authentication and gain unrestricted access to the root shell of an affected device. The vulnerability exists because the affected software has insufficient authentication mechanisms for certain commands. An attacker could exploit this vulnerability by stopping the boot initialization of an affected device. A successful exploit could allow the attacker to bypass authentication and gain unrestricted access to the root shell of the affected device.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

A vulnerability in the mesh code of Cisco Wireless LAN Controller (WLC) software could allow an unauthenticated, remote attacker to impersonate a WLC in a meshed topology. The vulnerability is due to insufficient authentication of the parent access point in a mesh configuration. An attacker could exploit this vulnerability by forcing the target system to disconnect from the correct parent access point and reconnect to a rogue access point owned by the attacker. An exploit could allow the attacker to control the traffic flowing through the impacted access point or take full control of the target system. This vulnerability affects the following products running a vulnerable version of Wireless LAN Controller software and configured for meshed mode: Cisco 8500 Series Wireless Controller, Cisco 5500 Series Wireless Controller, Cisco 2500 Series Wireless Controller, Cisco Flex 7500 Series Wireless Controller, Cisco Virtual Wireless Controller, Wireless Services Module 2 (WiSM2). Note that additional configuration is needed in addition to upgrading to a fixed release. Cisco Bug IDs: CSCuc98992 CSCuu14804.

A vulnerability in the CLI of Cisco Connected Mobile Experiences (CMX) could allow an authenticated, local attacker with administrative credentials to bypass restrictions on the CLI. The vulnerability is due to insufficient security mechanisms in the restricted shell implementation. An attacker could exploit this vulnerability by sending crafted commands to the CLI. A successful exploit could allow the attacker to escape the restricted shell and execute a set of normally unauthorized commands with the privileges of a non-root user. To exploit this vulnerability, an attacker would need to have valid administrative credentials.

Race condition in the Phone Proxy component in Cisco Adaptive Security Appliance (ASA) Software 9.1(.3) and earlier allows remote attackers to bypass sec_db authentication and provide certain pass-through services to untrusted devices via a crafted configuration-file TFTP request, aka Bug ID CSCuj66766.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

The Disaster Recovery (DRA) feature on the Cisco ISB8320-E High-Definition IP-Only DVR allows remote attackers to bypass authentication by establishing a TELNET session during a recovery boot, aka Bug ID CSCup85422.

Cisco Video Surveillance Operations Manager (VSOM) does not require authentication for MySQL database connections, which allows remote attackers to obtain sensitive information, modify data, or cause a denial of service by leveraging network connectivity from a client system with a crafted host name, aka Bug ID CSCud10992.

A vulnerability in the login page of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to log in without credentials and access all roles without any restrictions. This vulnerability is due to exposed sensitive Security Assertion Markup Language (SAML) metadata. An attacker could exploit this vulnerability by using the exposed SAML metadata to bypass authentication to the user portal. A successful exploit could allow the attacker to access all roles without any restrictions.

A vulnerability in the external authentication functionality of Cisco Secure Email and Web Manager, formerly known as Cisco Security Management Appliance (SMA), and Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass authentication and log in to the web management interface of an affected device. This vulnerability is due to improper authentication checks when an affected device uses Lightweight Directory Access Protocol (LDAP) for external authentication. An attacker could exploit this vulnerability by entering a specific input on the login page of the affected device. A successful exploit could allow the attacker to gain unauthorized access to the web-based management interface of the affected device.

A vulnerability in the Simple Network Management Protocol (SNMP) access controls for Cisco FirePOWER Software for Adaptive Security Appliance (ASA) FirePOWER module, Cisco Firepower Management Center (FMC) Software, and Cisco Next-Generation Intrusion Prevention System (NGIPS) Software could allow an unauthenticated, remote attacker to perform an SNMP GET request using a default credential. This vulnerability is due to the presence of a default credential for SNMP version 1 (SNMPv1) and SNMP version 2 (SNMPv2). An attacker could exploit this vulnerability by sending an SNMPv1 or SNMPv2 GET request to an affected device. A successful exploit could allow the attacker to retrieve sensitive information from the device using the default credential. This attack will only be successful if SNMP is configured, and the attacker can only perform SNMP GET requests; write access using SNMP is not allowed.

The VTY authentication implementation in Cisco IOS XE 03.02.xxSE and 03.03.xxSE incorrectly relies on the Linux-IOS internal-network configuration, which allows remote attackers to bypass authentication by leveraging access to a 192.168.x.2 source IP address, aka Bug ID CSCuj90227.

The remote-access VPN implementation in Cisco Adaptive Security Appliance (ASA) Software 7.x before 7.2(5.12), 8.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.6.x before 8.6(1.12), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.5), when an override-account-disable option is enabled, does not properly parse AAA LDAP responses, which allows remote attackers to bypass authentication via a VPN connection attempt, aka Bug ID CSCug83401.

Unspecified vulnerability in Cisco Unity 4.x before 4.2(1)ES161, 5.x before 5.0(1)ES53, and 7.x before 7.0(2)ES8, when using anonymous authentication (aka native Unity authentication), allows remote attackers to bypass authentication and read or modify system configuration parameters by going to a specific link more than once.

The Adaptive Security Device Management (ASDM) remote-management feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.6) does not properly implement the authentication-certificate option, which allows remote attackers to bypass authentication via a TCP session to an ASDM interface, aka Bug ID CSCuh44815.

The authentication manager process in the web framework in Cisco Intrusion Prevention System (IPS) does not properly handle user tokens, which allows remote attackers to cause a denial of service (intermittent MainApp hang) via a crafted management-interface connection request, aka Bug ID CSCuf20148.

Cisco Video Surveillance Manager (VSM) before 7.0.0 allows remote attackers to obtain sensitive configuration, archive, and log information via unspecified vectors, related to the Cisco_VSBWT (aka Broadware sample code) package, aka Bug ID CSCsv37288.

Cisco Video Surveillance Manager (VSM) before 7.0.0 does not require authentication for access to VSMC monitoring pages, which allows remote attackers to obtain sensitive configuration, archive, and log information via unspecified vectors, related to the Cisco_VSBWT (aka Broadware sample code) package, aka Bug ID CSCsv40169.

The EAP-FAST authentication module in Cisco Secure Access Control Server (ACS) 4.x before 4.2.1.15.11, when a RADIUS server configuration is enabled, does not properly parse user identities, which allows remote attackers to execute arbitrary commands via crafted EAP-FAST packets, aka Bug ID CSCui57636.

A vulnerability in the Cisco IOS XE Software REST API could allow an authenticated, remote attacker to bypass API authorization checks and use the API to perform privileged actions on an affected device. The vulnerability is due to insufficient authorization checks for requests that are sent to the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious request to an affected device via the REST API. A successful exploit could allow the attacker to selectively bypass authorization checks for the REST API of the affected software and use the API to perform privileged actions on an affected device. Cisco Bug IDs: CSCuz56428.

A vulnerability in the API gateway of the Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to bypass authentication and access critical services. The vulnerability is due to a failure to normalize URLs prior to servicing requests. An attacker could exploit this vulnerability by submitting a crafted URL designed to exploit the issue. A successful exploit could allow the attacker to gain unauthenticated access to critical services, resulting in elevated privileges in DNA Center. This vulnerability affects Cisco DNA Center Software Releases prior to 1.1.2. Cisco Bug IDs: CSCvi09394.

Cisco Linksys E4200 1.0.05 Build 7 devices contain a Security Bypass Vulnerability which could allow remote attackers to gain unauthorized access.

A vulnerability in the 802.1x multiple-authentication (multi-auth) feature of Cisco IOS Software could allow an unauthenticated, adjacent attacker to bypass the authentication phase on an 802.1x multi-auth port. The vulnerability is due to a logic change error introduced into the code. An attacker could exploit this vulnerability by trying to access an 802.1x multi-auth port after a successful supplicant has authenticated. An exploit could allow the attacker to bypass the 802.1x access controls and obtain access to the network. Cisco Bug IDs: CSCvg69701.

The ISM module in Cisco IOS on ISR G2 routers does not properly handle authentication-header packets, which allows remote authenticated users to cause a denial of service (module reload) via a series of malformed packets, aka Bug ID CSCub92025.

The Location Bandwidth Manager (LBM) Intracluster-communication feature in Cisco Unified Communications Manager (CUCM) 9.x before 9.1(1) does not require authentication from the remote LBM Hub node, which allows remote attackers to conduct cache-poisoning attacks against transaction records, and cause a denial of service (bandwidth-pool consumption and call outage), via unspecified vectors, aka Bug ID CSCub28920.

The Real-Time Information Server (RIS) Data Collector service in Cisco Unified Communications Manager (CUCM) 5.x before 5.1(3) and 6.x before 6.1(1) allows remote attackers to bypass authentication, and obtain cluster configuration information and statistics, via a direct TCP connection to the service port, aka Bug ID CSCsj90843.

The authentication-proxy implementation on Cisco Adaptive Security Appliances (ASA) devices with software 7.x before 7.2(5.10), 8.0 before 8.0(5.31), 8.1 and 8.2 before 8.2(5.38), 8.3 before 8.3(2.37), 8.4 before 8.4(5.3), 8.5 and 8.6 before 8.6(1.10), 8.7 before 8.7(1.4), 9.0 before 9.0(1.1), and 9.1 before 9.1(1.2) allows remote attackers to cause a denial of service (device reload) via a crafted URL, aka Bug ID CSCud16590.

The auth-proxy functionality in Cisco Firewall Services Module (FWSM) software 3.1 and 3.2 before 3.2(20.1), 4.0 before 4.0(15.2), and 4.1 before 4.1(5.1) allows remote attackers to cause a denial of service (device reload) via a crafted URL, aka Bug ID CSCtg02624.

Session fixation vulnerability in Cisco Secure Access Control System (ACS) allows remote attackers to hijack web sessions via unspecified vectors, aka Bug ID CSCud95787.

Cisco Unified Communications Manager (CUCM) does not properly limit the rate of authentication attempts, which allows remote attackers to cause a denial of service (application slowdown) via a series of requests, aka Bug ID CSCud39515.

The Disaster Recovery Framework (DRF) master server in Cisco Unified Communications products, including Unified Communications Manager (CUCM) 5.x and 6.x, Unified Presence 1.x and 6.x, Emergency Responder 2.x, and Mobility Manager 2.x, does not require authentication for requests received from the network, which allows remote attackers to execute arbitrary code via unspecified vectors.

SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte.

A vulnerability in the Ultra Automation Service (UAS) of the Cisco Ultra Services Framework could allow an unauthenticated, remote attacker to gain unauthorized access to a targeted device. The vulnerability is due to an insecure default configuration of the Apache ZooKeeper service used by the affected software. An attacker could exploit this vulnerability by accessing the affected device through the orchestrator network. An exploit could allow the attacker to gain access to ZooKeeper data nodes (znodes) and influence the behavior of the system's high-availability feature. This vulnerability affects all releases of Cisco Ultra Services Framework UAS prior to Releases 5.0.3 and 5.1. Cisco Bug IDs: CSCvd29395.

A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995.

A vulnerability in the management of shell user accounts for Cisco Policy Suite (CPS) Software for CPS appliances could allow an authenticated, local attacker to gain elevated privileges on an affected system. The affected privilege level is not at the root level. The vulnerability is due to incorrect role-based access control (RBAC) for shell user accounts. An attacker could exploit this vulnerability by authenticating to an affected appliance and providing crafted user input via the CLI. A successful exploit could allow the attacker to acquire a higher privilege level than should have been granted. To exploit this vulnerability, the attacker must log in to the appliance with valid credentials. Cisco Bug IDs: CSCve37724. Known Affected Releases: 9.0.0, 9.1.0, 10.0.0, 11.0.0, 12.0.0.