The XML API in TelePresence Codec (TC) 7.2.0, 7.2.1, 7.3.0, 7.3.1, 7.3.2, 7.3.3, 7.3.4, and 7.3.5 and Collaboration Endpoint (CE) 8.0.0, 8.0.1, and 8.1.0 in Cisco TelePresence Software mishandles authentication, which allows remote attackers to execute control commands or make configuration changes via an API request, aka Bug ID CSCuz26935.

A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008.

Cisco Wireless LAN Controller (WLC) devices with software 7.6.x, 8.0 before 8.0.121.0, and 8.1 before 8.1.131.0 allow remote attackers to change configuration settings via unspecified vectors, aka Bug ID CSCuw06153.

Cisco EPC3928 devices with EDVA 5.5.10, 5.5.11, and 5.7.1 allow remote attackers to bypass an intended authentication requirement and execute unspecified administrative functions via a crafted HTTP request, aka Bug ID CSCux24941.

A vulnerability in the interdevice communications interface of the Cisco IP Interoperability and Collaboration System (IPICS) Universal Media Services (UMS) could allow an unauthenticated, remote attacker to modify configuration parameters of the UMS and cause the system to become unavailable. Affected Products: This vulnerability affects Cisco IPICS releases 4.8(1) to 4.10(1). More Information: CSCva46644. Known Affected Releases: 4.10(1) 4.8(1) 4.8(2) 4.9(1) 4.9(2).

A vulnerability in the web-based graphical user interface (GUI) of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. Cisco Prime Home versions 5.1.1.6 and earlier and 5.2.2.2 and earlier have been confirmed to be vulnerable. Cisco Prime Home versions 6.0 and later are not vulnerable. More Information: CSCvb71732. Known Affected Releases: 5.0 5.0(1) 5.0(1.1) 5.0(1.2) 5.0(2) 5.15.1(0) 5.1(1) 5.1(1.3) 5.1(1.4) 5.1(1.5) 5.1(1.6) 5.1(2) 5.1(2.1) 5.1(2.3) 5.25.2(0.1) 5.2(1.0) 5.2(1.2) 5.2(2.0) 5.2(2.1) 5.2(2.2).

Cisco NX-OS 6.0(2)U6(1) through 6.0(2)U6(5) on Nexus 3000 devices and 6.0(2)A6(1) through 6.0(2)A6(5) and 6.0(2)A7(1) on Nexus 3500 devices has hardcoded credentials, which allows remote attackers to obtain root privileges via a (1) TELNET or (2) SSH session, aka Bug ID CSCuy25800.

Cisco Unified Computing System (UCS) 1.x before 1.4(4) and 2.x before 2.0(2m) allows remote attackers to bypass KVM authentication via a crafted authentication request to a Cisco Integrated Management Controller (IMC), aka Bug ID CSCts53746.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the password recovery function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password recovery request. An attacker could exploit this vulnerability by submitting a password recovery request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07253.

A vulnerability in Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to access the Java Remote Method Invocation (RMI) system. The vulnerability is due to an open port in the Network Interface and Configuration Engine (NICE) service. An attacker could exploit this vulnerability by accessing the open RMI system on an affected PCP instance. An exploit could allow the attacker to perform malicious actions that affect PCP and the devices that are connected to it. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd61746.

A vulnerability in the password reset function of Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of a password reset request. An attacker could exploit this vulnerability by submitting a password reset request and changing the password for any user on an affected system. An exploit could allow the attacker to gain administrative-level privileges on the affected system. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd07245.

A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995.

A vulnerability in the authentication functionality of the web-based service portal of Cisco Elastic Services Controller Software could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper security restrictions that are imposed by the web-based service portal of the affected software. An attacker could exploit this vulnerability by submitting an empty password value to an affected portal when prompted to enter an administrative password for the portal. A successful exploit could allow the attacker to bypass authentication and gain administrator privileges for the web-based service portal of the affected software. This vulnerability affects Cisco Elastic Services Controller Software Release 3.0.0. Cisco Bug IDs: CSCvg29809.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to bypass authentication and invoke arbitrary methods via a malformed SOAP request, aka Bug ID CSCtc59562.

A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036.

A vulnerability in the upgrade mechanism of Cisco collaboration products based on the Cisco Voice Operating System software platform could allow an unauthenticated, remote attacker to gain unauthorized, elevated access to an affected device. The vulnerability occurs when a refresh upgrade (RU) or Prime Collaboration Deployment (PCD) migration is performed on an affected device. When a refresh upgrade or PCD migration is completed successfully, an engineering flag remains enabled and could allow root access to the device with a known password. If the vulnerable device is subsequently upgraded using the standard upgrade method to an Engineering Special Release, service update, or a new major release of the affected product, this vulnerability is remediated by that action. Note: Engineering Special Releases that are installed as COP files, as opposed to the standard upgrade method, do not remediate this vulnerability. An attacker who can access an affected device over SFTP while it is in a vulnerable state could gain root access to the device. This access could allow the attacker to compromise the affected system completely. Cisco Bug IDs: CSCvg22923, CSCvg55112, CSCvg55128, CSCvg55145, CSCvg58619, CSCvg64453, CSCvg64456, CSCvg64464, CSCvg64475, CSCvg68797.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to bypass user authentication and gain access as an administrative user. The vulnerability is due to insufficient request header validation during the authentication process. An attacker could exploit this vulnerability by sending a series of malicious requests to an affected device. An exploit could allow the attacker to gain full administrative access to the affected device.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to acquire a valid session token with administrator privileges, bypassing user authentication. The vulnerability is due to insufficient request header validation during the authentication process. An attacker could exploit this vulnerability by sending a series of malicious requests to an affected device. An exploit could allow the attacker to use the acquired session token to gain full administrator access to the affected device.

A vulnerability in the REST API interface of Cisco Vision Dynamic Signage Director could allow an unauthenticated, remote attacker to bypass authentication on an affected system. The vulnerability is due to insufficient validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to execute arbitrary actions through the REST API with administrative privileges on the affected system. The REST API is enabled by default and cannot be disabled.

A vulnerability in the web-based management interface of Cisco UCS Director and Cisco UCS Director Express for Big Data could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper authentication request handling. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow an unprivileged attacker to access and execute arbitrary actions through certain APIs.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. The vulnerability is due to improper handling of Lightweight Directory Access Protocol (LDAP) authentication responses from an external authentication server. An attacker could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to gain administrative access to the web-based management interface of the affected device.

Cisco TelePresence Recording Server devices with software 1.6.x do not require authentication for an XML-RPC interface, which allows remote attackers to perform unspecified actions via a session on TCP port 8080, aka Bug ID CSCtg35833.

A vulnerability in Cisco Webex Meetings and Cisco Webex Meetings Server could allow an unauthenticated, remote attacker to gain unauthorized access to a vulnerable Webex site. The vulnerability is due to improper handling of authentication tokens by a vulnerable Webex site. An attacker could exploit this vulnerability by sending crafted requests to a vulnerable Cisco Webex Meetings or Cisco Webex Meetings Server site. If successful, the attacker could gain the privileges of another user within the affected Webex site.

A vulnerability in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary commands with administrative commands on an affected device. The vulnerability is due to improper session management on affected devices. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected device. A successful exploit could allow the attacker to gain administrative access on the affected device.

S-A WebSTAR DPC2100 v2.0.2r1256-060303 devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

Cisco VPN 3000 series concentrators and Cisco VPN 3002 Hardware Client 3.5.x through 4.0.REL, when enabling IPSec over TCP for a port on the concentrator, allow remote attackers to reach the private network without authentication.

Cisco Virtual Private Network (VPN) Client software 2.x.x, and 3.x before 3.5.2B, does not generate sufficiently random numbers, which may make it vulnerable to certain attacks such as spoofing.

Cisco Secure ACS 3.x before 3.3(4) Build 12 patch 7, 4.0.x, 4.1.x before 4.1(4) Build 13 Patch 11, and 4.2.x before 4.2(0) Build 124 Patch 4 does not properly handle an EAP Response packet in which the value of the length field exceeds the actual packet length, which allows remote authenticated users to cause a denial of service (CSRadius and CSAuth service crash) or possibly execute arbitrary code via a crafted RADIUS (1) EAP-Response/Identity, (2) EAP-Response/MD5, or (3) EAP-Response/TLS Message Attribute packet.

Cisco Prime Infrastructure 1.2.0 through 2.2(2) and Cisco Evolved Programmable Network Manager (EPNM) 1.2 allow remote attackers to execute arbitrary code via crafted deserialized data in an HTTP POST request, aka Bug ID CSCuw03192.

Cisco Unified Computing System (UCS) Central Software 1.3(1b) and earlier allows remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuv33856.

Cisco Firepower System Software 6.0.0 through 6.1.0 has a hardcoded account, which allows remote attackers to obtain CLI access by leveraging knowledge of the password, aka Bug ID CSCuz56238.

Buffer overflow in the IKEv1 and IKEv2 implementations in Cisco ASA Software before 8.4(7.30), 8.7 before 8.7(1.18), 9.0 before 9.0(4.38), 9.1 before 9.1(7), 9.2 before 9.2(4.5), 9.3 before 9.3(3.7), 9.4 before 9.4(2.4), and 9.5 before 9.5(2.2) on ASA 5500 devices, ASA 5500-X devices, ASA Services Module for Cisco Catalyst 6500 and Cisco 7600 devices, ASA 1000V devices, Adaptive Security Virtual Appliance (aka ASAv), Firepower 9300 ASA Security Module, and ISA 3000 devices allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via crafted UDP packets, aka Bug IDs CSCux29978 and CSCux42019.

The Cisco Content Services Switch (CSS) 11500 with software 8.20.4.02 and the Application Control Engine (ACE) 4710 with software A2(3.0) do not properly handle LF header terminators in situations where the GET line is terminated by CRLF, which allows remote attackers to conduct HTTP request smuggling attacks and possibly bypass intended header insertions via crafted header data, as demonstrated by an LF character between the ClientCert-Subject and ClientCert-Subject-CN headers. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-1576.

Cisco Modular Encoding Platform D9036 Software before 02.04.70 has hardcoded (1) root and (2) guest passwords, which makes it easier for remote attackers to obtain access via an SSH session, aka Bug ID CSCut88070.

An unspecified CGI script in Cisco FX-OS before 1.1.2 on Firepower 9000 devices and Cisco Unified Computing System (UCS) Manager before 2.2(4b), 2.2(5) before 2.2(5a), and 3.0 before 3.0(2e) allows remote attackers to execute arbitrary shell commands via a crafted HTTP request, aka Bug ID CSCur90888.

The Admin portal in Cisco Identity Services Engine (ISE) 1.1.x, 1.2.0 before patch 17, 1.2.1 before patch 8, 1.3 before patch 5, and 1.4 before patch 4 allows remote attackers to obtain administrative access via unspecified vectors, aka Bug ID CSCuw34253.

SQL injection vulnerability in the web-based management interface on Cisco RV220W devices allows remote attackers to execute arbitrary SQL commands via a crafted header in an HTTP request, aka Bug ID CSCuv29574.

A vulnerability in the Docker Engine configuration of Cisco CloudCenter Orchestrator (CCO; formerly CliQr) could allow an unauthenticated, remote attacker to install Docker containers with high privileges on the affected system. Affected Products: This vulnerability affect all releases of Cisco CloudCenter Orchestrator (CCO) deployments where the Docker Engine TCP port 2375 is open on the system and bound to local address 0.0.0.0 (any interface).

Cisco Wireless Control System (WCS) before 4.0.96.0 has a hard-coded FTP username and password for backup operations, which allows remote attackers to read and modify arbitrary files via unspecified vectors related to "properties of the FTP server," aka Bug ID CSCse93014.

Cisco Secure ACS does not require authentication when Cisco Trust Agent (CTA) transmits posture information, which might allow remote attackers to gain network access via a spoofed Network Endpoint Assessment posture, aka "NACATTACK." NOTE: this attack might be limited to authenticated users and devices.

A vulnerability in the Redis implementation used by the Cisco Policy Suite for Mobile and Cisco Policy Suite Diameter Routing Agent software could allow an unauthenticated, remote attacker to modify key-value pairs for short-lived events stored by the Redis server. The vulnerability is due to improper authentication when accessing the Redis server. An unauthenticated attacker could exploit this vulnerability by modifying key-value pairs stored within the Redis server database. An exploit could allow the attacker to reduce the efficiency of the Cisco Policy Suite for Mobile and Cisco Policy Suite Diameter Routing Agent software.

A vulnerability in Cisco Meeting Server and Meeting App could allow an unauthenticated, remote attacker to execute arbitrary code on an affected system. This vulnerability affects the following products: Cisco Meeting Server releases prior to 2.0.1, Acano Server releases prior to 1.8.16 and prior to 1.9.3, Cisco Meeting App releases prior to 1.9.8, Acano Meeting Apps releases prior to 1.8.35. More Information: CSCva75942 CSCvb67878. Known Affected Releases: 1.81.92.0.

A vulnerability in the Transaction Language 1 (TL1) code of Cisco ASR 900 Series routers could allow an unauthenticated, remote attacker to cause a reload of, or remotely execute code on, the affected system. This vulnerability affects Cisco ASR 900 Series Aggregation Services Routers (ASR902, ASR903, and ASR907) that are running the following releases of Cisco IOS XE Software: 3.17.0S 3.17.1S 3.17.2S 3.18.0S 3.18.1S. More Information: CSCuy15175. Known Affected Releases: 15.6(1)S 15.6(2)S. Known Fixed Releases: 15.6(1)S2.12 15.6(1.17)S0.41 15.6(1.17)SP 15.6(2)SP 16.4(0.183) 16.5(0.10).

Cisco CBOS 2.3.8 and earlier stores the passwords for (1) exec and (2) enable in cleartext in the NVRAM and a configuration file, which could allow unauthorized users to obtain the passwords and gain privileges.

Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.3, adds an "HTTPS on Public Inbound (XML-Auto)(forward/in)" rule but sets the protocol to "ANY" when the XML filter configuration is enabled, which ultimately allows arbitrary traffic to pass through the concentrator.

Cisco Security Agent Management Center (CSAMC) 5.1 before 5.1.0.79 does not properly handle certain LDAP error messages, which allows remote attackers to bypass authentication requirements via an empty password when using an external LDAP server.

Heap-based buffer overflow in the VLAN Trunking Protocol (VTP) feature in Cisco IOS 12.1(19) allows remote attackers to execute arbitrary code via a long VLAN name in a VTP type 2 summary advertisement.