SMC Networks D3G0804W D3GNV5M-3.5.1.6.10_GA devices allow remote command execution by leveraging access to the Network Diagnostic Tools screen, as demonstrated by an admin login. The attacker must use a Parameter Pollution approach against goform/formSetDiagnosticToolsFmPing by providing the vlu_diagnostic_tools__ping_address parameter twice: once with a shell metacharacter and a command name, and once with a command argument.

The HP Integrated Lights-Out (iLO) BMC implementation allows remote attackers to bypass authentication and execute arbitrary IPMI commands by using cipher suite 0 (aka cipher zero) and an arbitrary password.

For Crestron TSW-X60 version prior to 2.001.0037.001 and MC3 version prior to 1.502.0047.001, The devices are shipped with authentication disabled, and there is no indication to users that they need to take steps to enable it. When compromised, the access to the CTP console is left open.

An issue was discovered in WildFly 10.1.2.Final. It is possible for an attacker to access the administration panel on TCP port 9990 without any authentication using "anonymous" access that is automatically created. Once logged in, a misconfiguration present by default (auto-deployment) permits an anonymous user to deploy a malicious .war file, leading to remote code execution. NOTE: the vendor indicates that anonymous access is not available in the default installation; however, it remains optional because there are several use cases for it, including development environments and network architectures that have a proxy server for access control to the WildFly server

The Supermicro BMC implementation allows remote attackers to bypass authentication and execute arbitrary IPMI commands by using cipher suite 0 (aka cipher zero) and an arbitrary password.

The Quantenna WiFi Controller on Telus Actiontec WEB6000Q v1.1.02.22 allows login with root level access with the user "root" and an empty password by using the enabled onboard UART headers.

The initial admin account setup wizard on Lexmark devices allow unauthenticated access to the “out of service erase” feature.

An issue was discovered on Canon LBP6650, LBP3370, LBP3460, and LBP7750C devices. It is possible to bypass the Administrator Mode authentication for /tlogin.cgi via vectors involving frame.cgi?page=DevStatus. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation

An authentication bypass flaw was found in the smart_proxy_dynflow component used by Foreman. A malicious attacker can use this flaw to remotely execute arbitrary commands on machines managed by vulnerable Foreman instances, in a highly privileged context.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.

Undocumented TELNET service in TRENDnet TEW-691GR and TEW-692GR when a web page named backdoor contains an HTML parameter of password and a value of j78G¬DFdg_24Mhw3.

The Sierra Wireless AirLink Raven X EV-DO gateway 4221_4.0.11.003 and 4228_4.0.11.003 allows remote attackers to reprogram the firmware via a replay attack using UDP ports 17336 and 17388.

The web server in Novell ZENworks Configuration Management (ZCM) 10.3 and 11.2 before 11.2.4 does not properly perform authentication for zenworks/jsp/index.jsp, which allows remote attackers to conduct directory traversal attacks, and consequently upload and execute arbitrary programs, via a request to TCP port 443.

An Authentication Bypass vulnerability exists in DELL SonicWALL Global Management System (GMS) 4.1, 5.0, 5.1, 6.0, and 7.0, Analyzer 7.0, Universal Management Appliance (UMA) 5.1, 6.0, and 7.0 and ViewPoint 4.1, 5.0, and 6.0 via a crafted request to the SGMS interface, which could let a remote malicious user obtain administrative access.

VMware vCenter Server 4.0 before Update 4b and 4.1 before Update 3a, VMware VirtualCenter 2.5, VMware vSphere Client 4.0 before Update 4b and 4.1 before Update 3a, VMware VI-Client 2.5, VMware ESXi 3.5 through 4.1, and VMware ESX 3.5 through 4.1 do not properly implement the management authentication protocol, which allow remote servers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors.

An Authentication Bypass Vulnerability exists in DELL SonicWALL Analyzer 7.0, Global Management System (GMS) 4.1, 5.0, 5.1, 6.0, and 7.0; Universal Management Appliance (UMA) 5.1, 6.0, and 7.0 and ViewPoint 4.1, 5.0, 5.1, and 6.0 via the skipSessionCheck parameter to the UMA interface (/appliance/), which could let a remote malicious user obtain access to the root account.

openshift-ansible before versions 3.9.23, 3.7.46 deploys a misconfigured etcd file that causes the SSL client certificate authentication to be disabled. Quotations around the values of ETCD_CLIENT_CERT_AUTH and ETCD_PEER_CLIENT_CERT_AUTH in etcd.conf result in etcd being configured to allow remote users to connect without any authentication if they can access the etcd server bound to the network on the master nodes. An attacker could use this flaw to read and modify all the data about the Openshift cluster in the etcd datastore, potentially adding another compute node, or bringing down the entire cluster.

The web management UI in Palo Alto Networks PAN-OS before 3.1.12, 4.0.x before 4.0.10, and 4.1.x before 4.1.4 allows remote attackers to bypass authentication and obtain administrator privileges via unspecified vectors, aka Ref ID 37034.

The device does not properly authenticate users and the potential exists for a remote user to upload a new firmware image to the Ethernet card, whether it is a corrupt or legitimate firmware image. Successful exploitation of this vulnerability could cause loss of availability, integrity, and confidentiality and a disruption in communications with other connected devices. Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400

An improper authentication vulnerability has been reported to affect QNAP device running Video Station. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Video Station: Video Station 5.5.9 and later Video Station 5.3.13 and later Video Station 5.1.8 and later

An issue was discovered on Fujitsu Eternus Storage DX200 S4 devices through 2020-11-25. After logging into the portal as a root user (using any web browser), the portal can be accessed with root privileges when the URI cgi-bin/csp?cspid={XXXXXXXXXX}&csppage=cgi_PgOverview&csplang=en is visited from a different web browser.

acFTP 1.4 does not properly handle when an invalid password is provided by the user during authentication, which allows remote attackers to hide or misrepresent certain activity from log files and possibly gain privileges.

These Sinapsi devices do not check if users that visit pages within the device have properly authenticated. By directly visiting the pages within the device, attackers can gain unauthorized access with administrative privileges.

McAfee SmartFilter Administration, and SmartFilter Administration Bess Edition, before 4.2.1.01 does not require authentication for access to the JBoss Remote Method Invocation (RMI) interface, which allows remote attackers to execute arbitrary code via a crafted .war file.

An improper authentication vulnerability has been reported to affect QNAP device running Photo Station. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Photo Station: Photo Station 6.0.20 ( 2022/02/15 ) and later Photo Station 5.7.16 ( 2022/02/11 ) and later Photo Station 5.4.13 ( 2022/02/11 ) and later

D-Link DIR-615 Wireless N 300 Router allows authentication bypass via a modified POST request to login.cgi. This issue occurs because it fails to validate the password field. Successful exploitation of this issue allows an attacker to take control of the affected device.

4MOSAn GCB Doctor’s login page has improper validation of Cookie, which allows an unauthenticated remote attacker to bypass authentication by code injection in cookie, and arbitrarily manipulate the system or interrupt services by upload and execution of arbitrary files.

The web interface on (1) Foscam and (2) Wansview IP cameras allows remote attackers to bypass authentication, and perform administrative functions or read the admin password, via a direct request to an unspecified URL.

The network enabled distribution of Kura before 2.1.0 takes control over the device's firewall setup but does not allow IPv6 firewall rules to be configured. Still the Equinox console port 5002 is left open, allowing to log into Kura without any user credentials over unencrypted telnet and executing commands using the Equinox "exec" command. As the process is running as "root" full control over the device can be acquired. IPv6 is also left in auto-configuration mode, accepting router advertisements automatically and assigns a MAC address based IPv6 address.

Xiaongmai AHB7008T-MH-V2, AHB7804R-ELS, AHB7804R-MH-V2, AHB7808R-MS-V2, AHB7808R-MS, AHB7808T-MS-V2, AHB7804R-LMS, HI3518_50H10L_S39 V4.02.R11.7601.Nat.Onvif.20170420, V4.02.R11.Nat.Onvif.20160422, V4.02.R11.7601.Nat.Onvif.20170424, V4.02.R11.Nat.Onvif.20170327, V4.02.R11.Nat.Onvif.20161205, V4.02.R11.Nat.20170301, V4.02.R12.Nat.OnvifS.20170727 is affected by a backdoor in the macGuarder and dvrHelper binaries of DVR/NVR/IP camera firmware due to static root account credentials in the system.

webadmin-apache.conf in Novell Web Manager of Novell NetWare 6.5 uses an uppercase Alias tag with an inconsistent lowercase directory tag for a volume, which allows remote attackers to bypass access control to the WEB-INF folder.

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.

An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).

AIRTAME HDMI dongle with firmware before 2.2.0 allows unauthenticated access to a big part of the management interface. It is possible to extract all information including the Wi-Fi password, reboot, or force a software update at an arbitrary time.

A vulnerability was discovered in Siemens ViewPort for Web Office Portal before revision number 1453 that could allow an unauthenticated remote user to upload arbitrary code and execute it with the permissions of the operating-system user running the web server by sending specially crafted network packets to port 443/TCP or port 80/TCP.

The web server in the ECOM Ethernet module in Koyo H0-ECOM, H0-ECOM100, H2-ECOM, H2-ECOM-F, H2-ECOM100, H4-ECOM, H4-ECOM-F, and H4-ECOM100 does not require authentication, which allows remote attackers to perform unspecified functions via unknown vectors.

The doFilter method in UrlAccessController in HPE Intelligent Management Center (iMC) PLAT 7.2 E0403P06 allows remote bypass of authentication via unspecified strings in a URI.

The default installation of Cisco voice products, when running the IBM Director Agent on IBM servers before OS 2000.2.6, does not require authentication, which allows remote attackers to gain administrator privileges by connecting to TCP port 14247.

A vulnerability in the web-based GUI of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication and execute actions with administrator privileges. The vulnerability is due to a processing error in the role-based access control (RBAC) of URLs. An attacker could exploit this vulnerability by sending API commands via HTTP to a particular URL without prior authentication. An exploit could allow the attacker to perform any actions in Cisco Prime Home with administrator privileges. This vulnerability affects Cisco Prime Home versions from 6.3.0.0 to the first fixed release 6.5.0.1. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCvb49837.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

The web server on the Siemens Scalance S Security Module firewall S602 V2, S612 V2, and S613 V2 with firmware before 2.3.0.3 does not limit the rate of authentication attempts, which makes it easier for remote attackers to obtain access via a brute-force attack on the administrative password.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains a Java RMI Remote Code Execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.

WAPM-1166D firmware Ver.1.2.7 and earlier, WAPM-APG600H firmware Ver.1.16.1 and earlier allows remote attackers to bypass authentication and access the configuration interface via unspecified vectors.

On Jooan IP Camera A5 2.3.36 devices, an insecure FTP server does not require authentication, which allows remote attackers to read or replace core system files including those used for authentication (such as passwd and shadow). This can be abused to take full root level control of the device.

Unspecified vulnerability in SimpleIrcBot before 1.0 Stable has unknown impact and attack vectors related to an "auth vulnerability."

An issue was discovered in EMC Avamar Server 7.1.x, 7.2.x, 7.3.x, 7.4.x, 7.5.0; EMC NetWorker Virtual Edition (NVE) 9.0.x, 9.1.x, 9.2.x; and EMC Integrated Data Protection Appliance 2.0. A remote unauthenticated malicious user can potentially bypass application authentication and gain unauthorized root access to the affected systems.

An authentication bypass vulnerability on UTStar WA3002G4 ADSL Broadband Modem WA3002G4-0021.01 devices allows attackers to directly access administrative settings and obtain cleartext credentials from HTML source, as demonstrated by info.cgi, upload.cgi, backupsettings.cgi, pppoe.cgi, resetrouter.cgi, and password.cgi.

On certain Brother devices, authorization is mishandled by including a valid AuthCookie cookie in the HTTP response to a failed login attempt. Affected models are: MFC-J6973CDW MFC-J4420DW MFC-8710DW MFC-J4620DW MFC-L8850CDW MFC-J3720 MFC-J6520DW MFC-L2740DW MFC-J5910DW MFC-J6920DW MFC-L2700DW MFC-9130CW MFC-9330CDW MFC-9340CDW MFC-J5620DW MFC-J6720DW MFC-L8600CDW MFC-L9550CDW MFC-L2720DW DCP-L2540DW DCP-L2520DW HL-3140CW HL-3170CDW HL-3180CDW HL-L8350CDW HL-L2380DW ADS-2500W ADS-1000W ADS-1500W.

Xpress Server in SAP POS does not require authentication for file read and erase operations, daemon shutdown, terminal read operations, or certain attacks on credentials. This is SAP Security Note 2520064.

Xpress Server in SAP POS does not require authentication for read/write/delete file access. This is SAP Security Note 2520064.