An Information Exposure issue was discovered in Trihedral VTScada Versions prior to 11.2.26. Some files are exposed within the web server application to unauthenticated users. These files may contain sensitive configuration information.

CMS Made Simple version 1.x Form Builder before version 0.8.1.6 allows remote attackers to conduct information-disclosure attacks via exportxml.

NVIDIA driver contains a possible out-of-bounds read vulnerability due to a leak which may lead to information disclosure. This issue is rated as moderate. Android: A-63851980.

The bs_worker code in open build service before 20170320 followed relative symlinks, allowing reading of files outside of the package source directory during build, allowing leakage of private information.

An issue was discovered in BINOM3 Universal Multifunctional Electric Power Quality Meter. An INFORMATION EXPOSURE flaw can be used to gain privileged access to the device.

An issue was discovered in Carlo Gavazzi VMU-C EM prior to firmware Version A11_U05, and VMU-C PV prior to firmware Version A17. Sensitive information is stored in clear-text.

An Information Exposure issue was discovered in Schneider Electric Wonderware InTouch Access Anywhere, version 11.5.2 and prior. Credentials may be exposed to external systems via specific URL parameters, as arbitrary destination addresses may be specified.

The IPC implementation in Google Chrome before 22.0.1229.79 allows attackers to obtain potentially sensitive information about memory addresses via unspecified vectors.

The statistics generator in Apache Pony Mail 0.7 to 0.9 was found to be returning timestamp data without proper authorization checks. This could lead to derived information disclosure on private lists about the timing of specific email subjects or text bodies, though without disclosing the content itself. As this was primarily used as a caching feature for faster loading times, the caching was disabled by default to prevent this. Users using 0.9 should upgrade to 0.10 to address this issue.

saned in sane-backends 1.0.25 allows remote attackers to obtain sensitive memory information via a crafted SANE_NET_CONTROL_OPTION packet.

An information disclosure vulnerability exists in the Thermal Driver, where a missing bounds checking in the thermal driver could allow a read from an arbitrary kernel address. This issue is rated as moderate. Product: Pixel. Versions: N/A. Android ID: A-34702397. References: N-CVE-2017-6275.

An Information Exposure issue was discovered in Belden Hirschmann GECKO Lite Managed switch, Version 2.0.00 and prior versions. Non-sensitive information can be obtained anonymously.

Page table walks conducted by the MMU during virtual to physical address translation leave a trace in the last level cache of modern ARM processors. By performing a side-channel attack on the MMU operations, it is possible to leak data and code pointers from JavaScript, breaking ASLR.

CMS Made Simple version 1.x Form Builder before version 0.8.1.6 allows remote attackers to conduct information-disclosure attacks via defaultadmin.

MediaWiki before 1.27.4, 1.28.x before 1.28.3, and 1.29.x before 1.29.2, when a private wiki is configured, provides different error messages for failed login attempts depending on whether the username exists, which allows remote attackers to enumerate account names and conduct brute-force attacks via a series of requests.

CPEs used by subscribers on the access network receive their individual configuration settings from a central GAPS instance. A CPE identifies itself by the MAC address of its WAN interface and a certain "chk" value (48bit) derived from the MAC. The algorithm used to compute the "chk" was disclosed by reverse engineering the CPE's firmware. As a result, it is possible to forge valid "chk" values for any given MAC address and therefore receive the configuration settings of other subscribers' CPEs. The configuration settings often contain sensitive values, for example credentials (username/password) for VoIP services. This issue affects Genexis B.V. GAPS up to 7.2.

sylius/paypal-plugin is a paypal plugin for the Sylius development platform. In affected versions the URL to the payment page done after checkout was created with autoincremented payment id (/pay-with-paypal/{id}) and therefore it was easy to predict. The problem is that the Credit card form has prefilled "credit card holder" field with the Customer's first and last name and hence this can lead to personally identifiable information exposure. Additionally, the mentioned form did not require authentication. The problem has been patched in Sylius/PayPalPlugin 1.2.4 and 1.3.1. If users are unable to update they can override a sylius_paypal_plugin_pay_with_paypal_form route and change its URL parameters to (for example) {orderToken}/{paymentId}, then override the Sylius\PayPalPlugin\Controller\PayWithPayPalFormAction service, to operate on the payment taken from the repository by these 2 values. It would also require usage of custom repository method. Additionally, one could override the @SyliusPayPalPlugin/payWithPaypal.html.twig template, to add contingencies: ['SCA_ALWAYS'] line in hostedFields.submit(...) function call (line 421). It would then have to be handled in the function callback.

All versions of Apache Santuario - XML Security for Java prior to 2.2.3 and 2.1.7 are vulnerable to an issue where the "secureValidation" property is not passed correctly when creating a KeyInfo from a KeyInfoReference element. This allows an attacker to abuse an XPath Transform to extract any local .xml files in a RetrievalMethod element.

D-Link DGS-1510-28XMP, DGS-1510-28X, DGS-1510-52X, DGS-1510-52, DGS-1510-28P, DGS-1510-28, and DGS-1510-20 Websmart devices with firmware before 1.31.B003 allow attackers to conduct Unauthenticated Information Disclosure attacks via unspecified vectors.

Information Exposure vulnerability in Hitachi Energy LinkOne application, due to a misconfiguration in the ASP server exposes server and ASP.net information, an attacker that manages to exploit this vulnerability can use the exposed information as a reconnaissance for further exploitation. This issue affects: Hitachi Energy LinkOne 3.20; 3.22; 3.23; 3.24; 3.25; 3.26.

Page table walks conducted by the MMU during virtual to physical address translation leave a trace in the last level cache of modern AMD processors. By performing a side-channel attack on the MMU operations, it is possible to leak data and code pointers from JavaScript, breaking ASLR.

A flaw exists in tang, a network-based cryptographic binding server, which could result in leak of private keys.

atat.py in Plone before 4.2.3 and 4.3 before beta 1 allows remote attackers to read private data structures via a request for a view without a name.

The qcms_transform_data_rgb_out_lut_sse2 function in the QCMS implementation in Mozilla Firefox 4.x through 13.0, Thunderbird 5.0 through 13.0, and SeaMonkey before 2.11 might allow remote attackers to obtain sensitive information from process memory via a crafted color profile that triggers an out-of-bounds read operation.

Debug information disclosure exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. A direct request to cgi-bin/HASync/hasync.cgi?debug=1 shows Master LAN Address, Serial Number, HA Group ID, Virtual IP, and Submitted syncid.

Survey Solutions is a survey management and data collection system. In affected versions the Headquarters application publishes /metrics endpoint available to any user. None of the survey answers are ever exposed, only the aggregate counters, including count of interviews, or count of assignments. Starting from version 21.09.1 the endpoint is turned off by default.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.7, an attacker can perform a SIP digest leak attack against FreeSWITCH and receive the challenge response of a gateway configured on the FreeSWITCH server. This is done by challenging FreeSWITCH's SIP requests with the realm set to that of the gateway, thus forcing FreeSWITCH to respond with the challenge response which is based on the password of that targeted gateway. Abuse of this vulnerability allows attackers to potentially recover gateway passwords by performing a fast offline password cracking attack on the challenge response. The attacker does not require special network privileges, such as the ability to sniff the FreeSWITCH's network traffic, to exploit this issue. Instead, what is required for this attack to work is the ability to cause the victim server to send SIP request messages to the malicious party. Additionally, to exploit this issue, the attacker needs to specify the correct realm which might in some cases be considered secret. However, because many gateways are actually public, this information can easily be retrieved. The vulnerability appears to be due to the code which handles challenges in `sofia_reg.c`, `sofia_reg_handle_sip_r_challenge()` which does not check if the challenge is originating from the actual gateway. The lack of these checks allows arbitrary UACs (and gateways) to challenge any request sent by FreeSWITCH with the realm of the gateway being targeted. This issue is patched in version 10.10.7. Maintainers recommend that one should create an association between a SIP session for each gateway and its realm to make a check be put into place for this association when responding to challenges.

A weakness has been identified in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. The affected element is an unknown function of the component DHCP Client Information Handler. Executing a manipulation can lead to information disclosure. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

@Mail WebMail Client in AtMail Open-Source 1.04 and earlier allows remote attackers to obtain configuration information via a direct request to install/info.php, which calls the phpinfo function.

The NetApp ONTAP Select Deploy administration utility 2.0 through 2.2.1 might allow remote attackers to obtain sensitive information via unspecified vectors.

Discourse is a platform for community discussion. In affected versions any private message that includes a group had its title and participating user exposed to users that do not have access to the private messages. However, access control for the private messages was not compromised as users were not able to view the posts in the leaked private message despite seeing it in their inbox. The problematic commit was reverted around 32 minutes after it was made. Users are encouraged to upgrade to the latest commit if they are running Discourse against the `tests-passed` branch.

Feed preview for RSS feeds can be used to capture errors and exceptions generated by privileged content, allowing for the exposure of internal information not meant to be seen by web content. This vulnerability affects Firefox < 51.

Data sent with in multipart channels, such as the multipart/x-mixed-replace MIME type, will ignore the referrer-policy response header, leading to potential information disclosure for sites using this header. This vulnerability affects Firefox < 51.

ASUS RT-AC* and RT-N* devices with firmware before 3.0.0.4.380.7378 allow JSONP Information Disclosure such as a network map.

QNAP QTS before 4.2.4 Build 20170313 allows local users to obtain sensitive Domain Administrator password information by reading data in an XOR format within the /etc/config/uLinux.conf configuration file.

Docker CLI is the command line interface for the docker container runtime. A bug was found in the Docker CLI where running `docker login my-private-registry.example.com` with a misconfigured configuration file (typically `~/.docker/config.json`) listing a `credsStore` or `credHelpers` that could not be executed would result in any provided credentials being sent to `registry-1.docker.io` rather than the intended private registry. This bug has been fixed in Docker CLI 20.10.9. Users should update to this version as soon as possible. For users unable to update ensure that any configured credsStore or credHelpers entries in the configuration file reference an installed credential helper that is executable and on the PATH.

Nextcloud server is a self hosted system designed to provide cloud style services. In affected versions the User Status API did not consider the user enumeration settings by the administrator. This allowed a user to enumerate other users on the instance, even when user listings where disabled. It is recommended that the Nextcloud Server is upgraded to 20.0.14, 21.0.6 or 22.2.1. There are no known workarounds.

Discourse-reactions is a plugin for the Discourse platform that allows user to add their reactions to the post. In affected versions reactions given by user to secure topics and private messages are visible. This issue is patched in version 0.2 of discourse-reaction. Users who are unable to update are advised to disable the Discourse-reactions plugin in admin panel.

The TwitRocker2 application before 1.0.23 for Android does not properly implement the WebView class, which allows remote attackers to obtain sensitive information via a crafted application.

The Gecko Media Plugin sandbox allows access to local files that match specific regular expressions. On OS OX, this matching allows access to some data in subdirectories of "/private/var" that could expose personal or temporary data. This has been updated to not allow access to "/private/var" and its subdirectories. Note: this issue only affects OS X. Other operating systems are not affected. This vulnerability affects Firefox < 52 and Thunderbird < 52.

A bug in the handling of the pipelined requests in Apache Tomcat 9.0.0.M1 to 9.0.0.M18, 8.5.0 to 8.5.12, 8.0.0.RC1 to 8.0.42, 7.0.0 to 7.0.76, and 6.0.0 to 6.0.52, when send file was used, results in the pipelined request being lost when send file processing of the previous request completed. This could result in responses appearing to be sent for the wrong request. For example, a user agent that sent requests A, B and C could see the correct response for request A, the response for request C for request B and no response for request C.

The password reset form in Weblate before 2.10.1 provides different error messages depending on whether the email address is associated with an account, which allows remote attackers to enumerate user accounts via a series of requests.

A vulnerability in a custom-built GoAhead web server used on Foscam, Vstarcam, and multiple white-label IP camera models allows an attacker to craft a malformed HTTP ("GET system.ini HTTP/1.1\n\n" - note the lack of "/" in the path field of the request) request that will disclose the configuration file with the login password.

Metabase is an open source data analytics platform. In affected versions a security issue has been discovered with the custom GeoJSON map (`admin->settings->maps->custom maps->add a map`) support and potential local file inclusion (including environment variables). URLs were not validated prior to being loaded. This issue is fixed in a new maintenance release (0.40.5 and 1.40.5), and any subsequent release after that. If you’re unable to upgrade immediately, you can mitigate this by including rules in your reverse proxy or load balancer or WAF to provide a validation filter before the application.

Hashed codes of JavaScript objects are shared between pages. This allows for pointer leaks because an object's address can be discovered through hash codes, and also allows for data leakage of an object's content using these hash codes. This vulnerability affects Thunderbird < 45.7, Firefox ESR < 45.7, and Firefox < 51.

A vulnerability in the web-based management interface of Cisco IOS and Cisco IOx Software could allow an unauthenticated, remote attacker to view confidential information that is displayed without authenticating to the device. Affected Products: This vulnerability affects Cisco IOS Software and Cisco IOx Software running on IR829, IR809, IE4K, and CGR1K platforms. More Information: CSCvb20897. Known Affected Releases: 1.0(0).

Information disclosure through directory listing on the Cohu 3960HD allows an attacker to view and download source code, log files, and other sensitive device information via a specially crafted web request with an extra / character, such as a "GET // HTTP/1.1" request.

Error responses from Apache Atlas versions 0.6.0-incubating and 0.7.0-incubating included stack trace, exposing excessive information.

Lenovo Help Android mobile app versions earlier than 6.1.2.0327 allowed information to be transmitted over an HTTP channel, permitting others observing the channel to potentially see this information.

Nextcloud is an open-source, self-hosted productivity platform. The Nextcloud OfficeOnline application prior to version 1.1.1 returned verbatim exception messages to the user. This could result in a full path disclosure on shared files. (e.g. an attacker could see that the file `shared.txt` is located within `/files/$username/Myfolder/Mysubfolder/shared.txt`). It is recommended that the OfficeOnline application is upgraded to 1.1.1. As a workaround, one may disable the OfficeOnline application in the app settings.