Citrix Secure Mail for Android before 20.11.0 suffers from Improper Control of Generation of Code ('Code Injection') by allowing unauthenticated access to read data stored within Secure Mail. Note that a malicious app would need to be installed on the Android device or a threat actor would need to execute arbitrary code on the Android device.

The web management interface in Citrix NetScaler 8.0 build 47.8 uses weak encryption (XOR of unpadded data) to store credentials within a cookie, which makes it easier for remote attackers to obtain cleartext credentials when a cookie is captured via a known-plaintext attack.

The TLS and DTLS processing functionality in Citrix NetScaler Application Delivery Controller (ADC) and NetScaler Gateway devices with firmware 9.x before 9.3 Build 68.5, 10.0 through Build 78.6, 10.1 before Build 130.13, 10.1.e before Build 130.1302.e, 10.5 before Build 55.8, and 10.5.e before Build 55.8007.e makes it easier for man-in-the-middle attackers to obtain cleartext data via a padding-oracle attack, a variant of CVE-2014-3566 (aka POODLE).

Citrix SD-WAN 10.2.x before 10.2.6 and 11.0.x before 11.0.3 has Missing SSL Certificate Validation.

Corruption of the system by a remote, unauthenticated user. The impact of this can include the reset of the administrator password at the next device reboot, allowing an attacker with ssh access to connect with the default administrator credentials after the device has rebooted.

Citrix SD-WAN 10.2.x before 10.2.1 and NetScaler SD-WAN 10.0.x before 10.0.7 have Improper Certificate Validation.

Citrix NetScaler ADC and NetScaler Gateway 10.5 before Build 65.11, 11.0 before Build 69.12/69.123, and 11.1 before Build 51.21 randomly generates GCM nonces, which makes it marginally easier for remote attackers to obtain the GCM authentication key and spoof data by leveraging a reused nonce in a session and a "forbidden attack," a similar issue to CVE-2016-0270.

Citrix NetScaler Application Delivery Controller (ADC) and NetScaler Gateway 10.5 before build 67.13, 11.0 before build 71.22, 11.1 before build 56.19, and 12.0 before build 53.22 allow remote attackers to obtain sensitive information from the backend client TLS handshake by leveraging use of TLS with Client Certificates and a Diffie-Hellman Ephemeral (DHE) key exchange.

Citrix NetScaler Application Delivery Controller (ADC) and NetScaler Gateway 10.5 before build 67.13, 11.0 before build 71.22, 11.1 before build 56.19, and 12.0 before build 53.22 might allow remote attackers to decrypt TLS ciphertext data by leveraging a Bleichenbacher RSA padding oracle, aka a ROBOT attack.

Citrix XenApp 6.5, when 2FA is enabled, allows a remote unauthenticated attacker to ascertain whether a user exists on the server, because the 2FA error page only occurs after a valid username is entered. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Citrix NetScaler Gateway 12.1 before build 50.31, 12.0 before build 60.9, 11.1 before build 60.14, 11.0 before build 72.17, and 10.5 before build 69.5 and Application Delivery Controller (ADC) 12.1 before build 50.31, 12.0 before build 60.9, 11.1 before build 60.14, 11.0 before build 72.17, and 10.5 before build 69.5 allow remote attackers to obtain sensitive plaintext information because of a TLS Padding Oracle Vulnerability when CBC-based cipher suites are enabled.

A vulnerability has been discovered in Citrix ADC (formerly known as NetScaler ADC) and Citrix Gateway (formerly known as NetScaler Gateway), and Citrix SD-WAN WANOP Edition models 4000-WO, 4100-WO, 5000-WO, and 5100-WO. These vulnerabilities, if exploited, could lead to a phishing attack through a SAML authentication hijack to steal a valid user session.

Citrix Secure Mail for Android before 20.11.0 suffers from improper access control allowing unauthenticated access to read limited calendar related data stored within Secure Mail. Note that a malicious app would need to be installed on the Android device or a threat actor would need to execute arbitrary code on the Android device.

The configuration functionality in the Intelligent Platform Management Interface (IPMI) baseboard management controller (BMC) implementation on Supermicro X11 and M11 based devices, with firmware versions through 3.17.02, allows remote authenticated users to execute arbitrary commands.

Hard-coded credentials allow administrators to access the shell via the SD-WAN CLI

A vulnerability was found in Tenda AX12 Pro V2 16.03.49.24_cn. Affected by this issue is some unknown functionality of the component Telnet Service. Performing a manipulation results in hard-coded credentials. The attack is possible to be carried out remotely. A high degree of complexity is needed for the attack. The exploitation is known to be difficult. The exploit has been made public and could be used.

A security issue was discovered in the Kubernetes Image Builder versions <= v0.1.37 where default credentials are enabled during the image build process when using the Nutanix, OVA, QEMU or raw providers. The credentials can be used to gain root access. The credentials are disabled at the conclusion of the image build process. Kubernetes clusters are only affected if their nodes use VM images created via the Image Builder project. Because these images were vulnerable during the image build process, they are affected only if an attacker was able to reach the VM where the image build was happening and used the vulnerability to modify the image at the time the image build was occurring.

SiYuan is self-hosted, open source personal knowledge management software. In versions 3.5.1 and prior, the SiYuan Note application utilizes a hardcoded cryptographic secret for its session store. This unsafe practice renders the session encryption ineffective. Since the sensitive AccessAuthCode is stored within the session cookie, an attacker who intercepts or obtains a user's encrypted session cookie (e.g., via session hijacking) can locally decrypt it using the public key. Once decrypted, the attacker can retrieve the AccessAuthCode in plain text and use it to authenticate or take over the session.

Use of hard-coded credentials vulnerability exists in Machine automation controller NJ series all models V 1.48 and earlier, Machine automation controller NX7 series all models V1.28 and earlier, Machine automation controller NX1 series all models V1.48 and earlier, Automation software 'Sysmac Studio' all models V1.49 and earlier, and Programmable Terminal (PT) NA series NA5-15W/NA5-12W/NA5-9W/NA5-7W models Runtime V1.15 and earlier, which may allow a remote attacker who successfully obtained the user credentials by analyzing the affected product to access the controller.

Amcrest networked devices use the same hardcoded SSL private key across different customers' installations, which allows remote attackers to defeat cryptographic protection mechanisms by leveraging knowledge of this key from another installation, as demonstrated by Amcrest_IPC-HX1X3X-LEXUS_Eng_N_AMCREST_V2.420.AC01.3.R.20180206.

The default administrator account & password of the EDIMAX wireless network camera is hard-coded. Remote attackers can disassemble firmware to obtain the privileged permission and further control the devices.

A security flaw has been discovered in Tomofun Furbo 360 and Furbo Mini. Affected by this vulnerability is an unknown functionality of the file /squashfs-root/furbo_img of the component MQTT Client Certificate. Performing manipulation results in hard-coded credentials. The attack may be initiated remotely. The attack's complexity is rated as high. The exploitation appears to be difficult. The firmware versions determined to be affected are Furbo 360 up to FB0035_FW_036 and Furbo Mini up to MC0020_FW_074. The vendor was contacted early about this disclosure but did not respond in any way.

A CWE-798 “Use of Hard-coded Credentials” vulnerability in the MariaDB database of the web application allows a remote unauthenticated attacker to access the database service and all included data with the same privileges of the web application. This issue affects: AiLux imx6 bundle below version imx6_1.0.7-2.

HejHome GKW-IC052 IP Camera contained a hard-coded credentials vulnerability. This issue allows remote attackers to operate the IP Camera.(reboot, factory reset, snapshot etc..)

MediaWiki before 1.18.5, and 1.19.x before 1.19.2 saves passwords in the local database, (1) which could make it easier for context-dependent attackers to obtain cleartext passwords via a brute-force attack or, (2) when an authentication plugin returns a false in the strict function, could allow remote attackers to use old passwords for non-existing accounts in an external authentication system via unspecified vectors.

The vulnerability allows a remote attacker to authenticate to the SSH service with root privileges through a hidden hard-coded account.

A vulnerability has been found in PerfreeBlog 4.0.11 and classified as problematic. This vulnerability affects the function JwtUtil of the component JWT Handler. The manipulation leads to use of hard-coded cryptographic key . The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as problematic, has been found in mao888 bluebell-plus up to 2.3.0. This issue affects some unknown processing of the file bluebell_backend/pkg/jwt/jwt.go of the component JWT Token Handler. The manipulation of the argument mySecret with the input bluebell-plus leads to use of hard-coded password. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used.

A security flaw involving hard-coded credentials in LevelOne WBR-6012's web services allows attackers to gain unauthorized access during the first 30 seconds post-boot. Other vulnerabilities can force a reboot, circumventing the initial time restriction for exploitation.The password string can be found at addresses 0x 803cdd0f and 0x803da3e6: 803cdd0f 41 72 69 65 ds "AriesSerenaCairryNativitaMegan" 73 53 65 72 65 6e 61 43 ... It is referenced by the function at 0x800b78b0 and simplified in the pseudocode below: if (is_equal = strcmp(password,"AriesSerenaCairryNativitaMegan"){ ret = 3;} Where 3 is the return value to user-level access (0 being fail and 1 being admin/backdoor). While there's no legitimate functionality to change this password, once authenticated it is possible manually make a change by taking advantage of TALOS-2024-XXXXX using HTTP POST paramater "Pu" (new user password) in place of "Pa" (new admin password).

A security flaw involving hard-coded credentials in LevelOne WBR-6012's web services allows attackers to gain unauthorized access during the first 30 seconds post-boot. Other vulnerabilities can force a reboot, circumventing the initial time restriction for exploitation.The backdoor string can be found at address 0x80100910 80100910 40 6d 21 74 ds "@m!t2K1" 32 4b 31 00 It is referenced by the function located at 0x800b78b0 and is used as shown in the pseudocode below: if ((SECOND_FROM_BOOT_TIME < 300) && (is_equal = strcmp(password,"@m!t2K1")) { return 1;} Where 1 is the return value to admin-level access (0 being fail and 3 being user).

A use of hard-coded cryptographic key vulnerability [CWE-321] in FortiDDoS API 5.5.0 through 5.5.1, 5.4.0 through 5.4.2, 5.3.0 through 5.3.1, 5.2.0, 5.1.0 may allow an attacker who managed to retrieve the key from one device to sign JWT tokens for any device.

The MobileIron agents through 2021-03-22 for Android and iOS contain a hardcoded API key, used to communicate with the MobileIron SaaS discovery API, as demonstrated by Mobile@Work (aka com.mobileiron). The key is in com/mobileiron/registration/RegisterActivity.java and can be used for api/v1/gateway/customers/servers requests. NOTE: Vendor states that this is an opt-in feature to the product - it is not enabled by default and customers cannot enable it without an explicit email to support. At this time, they do not plan change to make any changes to this feature.

A vulnerability has been identified in SCALANCE X-200RNA switch family (All versions < V3.2.7), SCALANCE X-300 switch family (incl. X408 and SIPLUS NET variants) (All versions < V4.1.0). Devices do not create a new unique private key after factory reset. An attacker could leverage this situation to a man-in-the-middle situation and decrypt previously captured traffic.

A vulnerability has been identified in SCALANCE X-200 switch family (incl. SIPLUS NET variants) (All versions < V5.2.5), SCALANCE X-200IRT switch family (incl. SIPLUS NET variants) (All versions < V5.5.0), SCALANCE X-200RNA switch family (All versions < V3.2.7). Devices create a new unique key upon factory reset, except when used with C-PLUG. When used with C-PLUG the devices use the hardcoded private RSA-key shipped with the firmware-image. An attacker could leverage this situation to a man-in-the-middle situation and decrypt previously captured traffic.

An information disclosure vulnerability exists due to the hardcoded TLS key of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted man-in-the-middle attack can lead to a disclosure of sensitive information. An attacker can perform a man-in-the-middle attack to trigger this vulnerability.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has a hardcoded DSA SSH key for the root account within the /opt/mysql chroot directory tree.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has a hardcoded ECDSA SSH key for the root account.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has a hardcoded DSA SSH key for the root account.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has a hardcoded RSA SSH key for the root account within the /opt/axess chroot directory tree.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has a hardcoded DSA SSH key for the root account within the /opt/axess chroot directory tree.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has a hardcoded ECDSA SSH key for the root account within the /opt/axess chroot directory tree.

Zyxel CloudCNM SecuManager 3.1.0 and 3.1.1 has a hardcoded RSA SSH key for the root account.

A vulnerability in the key-based SSH authentication mechanism of Cisco Umbrella Virtual Appliance (VA) could allow an unauthenticated, remote attacker to impersonate a VA. This vulnerability is due to the presence of a static SSH host key. An attacker could exploit this vulnerability by performing a man-in-the-middle attack on an SSH connection to the Umbrella VA. A successful exploit could allow the attacker to learn the administrator credentials, change configurations, or reload the VA. Note: SSH is not enabled by default on the Umbrella VA.