The write-blocker in CRU Ditto Forensic FieldStation with firmware before 2013Oct15a has a default "ditto" username and password, which allows remote attackers to gain privileges.

Shihonkanri Plus GOOUT Ver1.5.8 and Ver2.2.10 allows remote attackers to execute arbitrary OS commands via unspecified vectors.

WL-Enq 1.11 and 1.12 allows remote attackers to execute arbitrary OS commands with the administrative privilege via unspecified vectors.

resi-calltrace in RESI Gemini-Net 4.2 is affected by OS Command Injection. It does not properly check the parameters sent as input before they are processed on the server. Due to the lack of validation of user input, an unauthenticated attacker can bypass the syntax intended by the software (e.g., concatenate `&|;\r\ commands) and inject arbitrary system commands with the privileges of the application user.

Unitrends Enterprise Backup 7.3.0 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the comm parameter to recoveryconsole/bpl/snmpd.php.

Autodesk VRED Professional 2014 before SR1 SP8 allows remote attackers to execute arbitrary code via Python os library calls in Python API commands to the integrated web server.

Remote Command Execution (RCE) vulnerability exists in HNAP1/control/SetWizardConfig.php in D-Link Router DIR-846 DIR846A1_FW100A43.bin and DIR846enFW100A53DLA-Retail.bin. Malicoius users can use this vulnerability to use "\ " or backticks in the shell metacharacters in the ssid0 or ssid1 parameters to cause arbitrary command execution. Since CVE-2019-17510 vulnerability has not been patched and improved www/hnap1/control/setwizardconfig.php, can also use line breaks and backquotes to bypass.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the ipdoamin parameter in /setting/setDiagnosisCfg.

An issue was discovered in Pascom Cloud Phone System before 7.20.x. In the management REST API, /services/apply in exd.pl allows remote attackers to execute arbitrary code via shell metacharacters.

The management interface for the Teltonika RUT9XX routers (aka LuCI) with firmware 00.03.265 and earlier allows remote attackers to execute arbitrary commands with root privileges via shell metacharacters in the username parameter in a login request.

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via SSH. An authenticated remote attacker can execute commands as the root user by issuing a specially crafted "unset" command.

IBM Spectrum Protect Plus 10.1.0 through 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. This vulnerability is due to an incomplete fix for CVE-2020-4211. IBM X-Force ID: 181724.

Keijiban Tsumiki v1.15 allows remote attackers to execute arbitrary OS commands via unspecified vectors.

The ZyXEL P660HN-T1A v1 TCLinux Fw $7.3.15.0 v001 / 3.40(ULM.0)b31 router distributed by TrueOnline has a command injection vulnerability in the Remote System Log forwarding function, which is accessible by an unauthenticated user. The vulnerability is in the ViewLog.asp page and can be exploited through the remote_host parameter.

Tenda TX9 Pro 22.03.02.10 devices allow OS command injection via set_route (called by doSystemCmd_route).

A command injection vulnerability in the component /setnetworksettings/SubnetMask of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the filename parameter in /setting/setUpgradeFW.

UNIVERGE SV9500 series from V1 to V7and SV8500 series from S6 to S8 allows an attacker to execute arbitrary OS commands or cause a denial-of-service (DoS) condition by sending a specially crafted request to a specific URL.

It is found that there is a command injection vulnerability in the setWiFiAdvancedCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

It is found that there is a command injection vulnerability in the setopenvpnclientcfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows attackers to execute arbitrary commands through a carefully constructed payload

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the hosttime function in /setting/NTPSyncWithHost.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the devicename parameter in /setting/setDeviceName.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175022.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175024.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175091.

mySCADA myPRO: Versions 8.20.0 and prior has a vulnerable debug interface which includes a ping utility, which may allow an attacker to inject arbitrary operating system commands.

Ajaxeplorer before 5.0.1 allows remote attackers to execute arbitrary commands via shell metacharacters in the (1) archive_name parameter to the Power FS module (plugins/action.powerfs/class.PowerFSController.php), a (2) file name to the getTrustSizeOnFileSystem function in the File System (Standard) module (plugins/access.fs/class.fsAccessWrapper.php), or the (3) revision parameter to the Subversion Repository module (plugins/meta.svn/class.SvnManager.php).

QNAP QTS before 4.2.4 Build 20170313 allows attackers to execute arbitrary commands via unspecified vectors.

An unauthenticated command-execution vulnerability exists in TerraMaster TOS through 4.2.06 via shell metacharacters in the Event parameter in include/makecvs.php during CSV creation.

HGiga MailSherlock does not validate specific parameters properly. Attackers can use the vulnerability to launch Command inject attacks remotely and execute arbitrary commands of the system.

oal_ipt_addBridgeIsolationRules on TP-Link TL-WR840N 6_EU_0.9.1_4.16 devices allows OS command injection because a raw string entered from the web interface (an IP address field) is used directly for a call to the system library function (for iptables). NOTE: oal_ipt_addBridgeIsolationRules is not the only function that calls util_execSystem.

Belkin LINKSYS RE6500 devices before 1.0.012.001 allow remote attackers to execute arbitrary commands or set a new password via shell metacharacters to the goform/setSysAdm page.

KLog Server 2.4.1 allows OS command injection via shell metacharacters in the actions/authenticate.php user parameter.

A vulnerability in the web-based management interface of Cisco DNA Spaces Connector could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary commands on the underling operating system with privileges of the web-based management application, which is running as a restricted user. This could result in changes being made to pages served by the web-based management application impacting the integrity or availability of the web-based management application.

TOTOLINK EX1200T V4.1.2cu.5215 contains a remote command injection vulnerability in the function setDiagnosisCfg of the file lib/cste_modules/system.so to control the ipDoamin.

A Command Injection issue was discovered in ContentStore/Base/CVDataPipe.dll in Commvault before v11 SP6. A certain message parsing function inside the Commvault service does not properly validate the input of an incoming string before passing it to CreateProcess. As a result, a specially crafted message can inject commands that will be executed on the target operating system. Exploitation of this vulnerability does not require authentication and can lead to SYSTEM level privilege on any system running the cvd daemon. This is a different vulnerability than CVE-2017-3195.

OS Command Injection vulnerability in debug_fcgi of D-Link DWR-932C E1 firmware allows a remote attacker to perform command injection via a crafted HTTP request.

An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. Multiple functions in the bpserverd daemon were vulnerable to arbitrary remote code execution as root. The vulnerability was caused by untrusted input (received by the server) being passed to system calls.

Certain NETGEAR devices are affected by command execution. This affects M4200-10MG-POE+ 12.0.2.11 and earlier, M4300-28G 12.0.2.11 and earlier, M4300-52G 12.0.2.11 and earlier, M4300-28G-POE+ 12.0.2.11 and earlier, M4300-52G-POE+ 12.0.2.11 and earlier, M4300-8X8F 12.0.2.11 and earlier, M4300-12X12F 12.0.2.11 and earlier, M4300-24X24F 12.0.2.11 and earlier, M4300-24X 12.0.2.11 and earlier, and M4300-48X 12.0.2.11 and earlier.

smalruby-editor v0.4.0 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

cgi-bin/drknow.cgi in Innotube ITGuard-Manager 0.0.0.1 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the username field, as demonstrated by a username beginning with "admin|" to use the '|' metacharacter.

Bulb Security Smartphone Pentest Framework (SPF) 0.1.2 through 0.1.4 allows remote attackers to execute arbitrary commands via shell metacharacters in the hostingPath parameter to (1) SEAttack.pl or (2) CSAttack.pl in frameworkgui/ or the (3) appURLPath parameter to frameworkgui/attachMobileModem.pl.

RaspberryMatic is a free and open-source operating system for running a cloud-free smart-home using the homematicIP / HomeMatic hardware line of IoT devices. A Remote Code Execution (RCE) vulnerability in the file upload facility of the WebUI interface of RaspberryMatic exists. Missing input validation/sanitization in the file upload mechanism allows remote, unauthenticated attackers with network access to the WebUI interface to achieve arbitrary operating system command execution via shell metacharacters in the HTTP query string. Injected commands are executed as root, thus leading to a full compromise of the underlying system and all its components. Versions after `2.31.25.20180428` and prior to `3.63.8.20220330` are affected. Users are advised to update to version `3.63.8.20220330` or newer. There are currently no known workarounds to mitigate the security impact and users are advised to update to the latest version available.

DELL EMC Avamar Server, versions 19.1, 19.2, 19.3, contain an OS Command Injection Vulnerability in Fitness Analyzer. A remote unauthenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS with high privileges. This vulnerability is considered critical as it can be leveraged to completely compromise the vulnerable application as well as the underlying operating system. Dell recommends customers to upgrade at the earliest opportunity.

cgi-bin/admin/servetest in TP-Link IP Cameras TL-SC3130, TL-SC3130G, TL-SC3171, TL-SC3171G, and possibly other models before beta firmware LM.1.6.18P12_sign6 allows remote attackers to execute arbitrary commands via shell metacharacters in (1) the ServerName parameter and (2) other unspecified parameters.

Command-injection vulnerability in Huawei E587 3G Mobile Hotspot 11.203.27 allows remote attackers to execute arbitrary shell commands with root privileges due to an error in the Web UI.

phf CGI program allows remote command execution through shell metacharacters.

The Billion 5200W-T 1.02b.rc5.dt49 router distributed by TrueOnline has a command injection vulnerability in the Remote System Log forwarding function, which is accessible by an unauthenticated user. The vulnerability is in the adv_remotelog.asp page and can be exploited through the syslogServerAddr parameter.

The web server on DBL DBLTek devices allows remote attackers to execute arbitrary OS commands by obtaining the admin password via a frame.html?content=/dev/mtdblock/5 request, and then using this password for the HTTP Basic Authentication needed for a change_password.csp request, which supports a "<%%25call system.exec:" string in the passwd parameter.

In Visual Tools DVR VX16 4.2.28.0, an unauthenticated attacker can achieve remote command execution via shell metacharacters in the cgi-bin/slogin/login.py User-Agent HTTP header.