A path traversal vulnerability exists in the Netgear SPH200D Skype phone firmware versions <= 1.0.4.80 in its embedded web server. Authenticated attackers can exploit crafted GET requests to access arbitrary files outside the web root by injecting traversal sequences. This can expose sensitive system files and configuration data.

An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN2200B model) firmware versions 1.0.0.36 and prior via the pppoe.cgi endpoint. A remote attacker with valid credentials can execute arbitrary commands via crafted input to the pppoe_username parameter. This flaw allows full compromise of the device and may persist across reboots unless configuration is restored.

An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN1000B model firmware versions 1.1.00.24 and 1.1.00.45) via the TimeToLive parameter in the setup.cgi endpoint. The vulnerability arises from improper input neutralization, enabling command injection through crafted POST requests. This flaw enables remote attackers to deploy payloads or manipulate system state post-authentication.

In Netgear RAX30 V1.0.10.94, a PHP-FPM misconfiguration vulnerability is caused by not following the specification to only limit FPM to .php extensions. An attacker may exploit this by uploading malicious scripts disguised with alternate extensions and tricking the web server into executing them as PHP, bypassing security mechanisms based on file extension filtering. This may lead to remote code execution (RCE), information disclosure, or full system compromise.

In Netgear R7000 V1.3.1.64_10.1.36 and EAX80 V1.0.1.70_1.0.2, the USERLIMIT_GLOBAL option is set to 0 in the bftpd.conf configuration file. This can cause DoS attacks when unlimited users are connected.

In Netgear XR300 V1.0.3.38_10.3.30, a stack-based buffer overflow vulnerability exists in the HTTPD service through the usb_device.cgi endpoint. The vulnerability occurs when processing POST requests containing the share_name parameter.

In Netgear XR300 V1.0.3.38_10.3.30, a stack-based buffer overflow exists in the HTTPD service through the usb_device.cgi endpoint. The vulnerability occurs when processing POST requests containing the read_access parameter.

In Netgear XR300 V1.0.3.38_10.3.30, a stack-based buffer overflow vulnerability exists in the HTTPD service through the usb_device.cgi endpoint. The vulnerability occurs when processing POST requests containing the usb_folder parameter.

A vulnerability, which was classified as critical, was found in Netgear D6400 1.0.0.114. This affects an unknown part of the file diag.cgi. The manipulation of the argument host_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early and confirmed the existence of the vulnerability. They reacted very quickly, professional and kind. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Netgear WNCE3001 1.0.0.50. It has been classified as critical. This affects the function http_d of the component HTTP POST Request Handler. The manipulation of the argument Host leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in Netgear EX6150 1.0.0.46_1.0.76. This affects the function sub_410090. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Netgear EX6100 1.0.2.28_1.1.138. It has been rated as critical. Affected by this issue is the function sub_415EF8. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Netgear EX3700 up to 1.0.0.88. It has been classified as critical. Affected is the function sub_41619C of the file /mtd. The manipulation leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 1.0.0.98 is able to address this issue. It is recommended to upgrade the affected component. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Netgear WNR614 1.1.0.28_1.0.1WW. It has been classified as critical. This affects an unknown part of the component URL Handler. The manipulation with the input %00currentsetting.htm leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This issue appears to have been circulating as an 0day since 2024.

A vulnerability has been found in Netgear DGND3700 1.1.00.15_1.00.15NA and classified as problematic. This vulnerability affects unknown code of the file /currentsetting.htm of the component mini_http. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

A vulnerability, which was classified as very critical, was found in Netgear DGND3700 1.1.00.15_1.00.15NA. This affects an unknown part of the file /BRS_top.html of the component Basic Authentication. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

A vulnerability, which was classified as problematic, has been found in Netgear DGND3700 1.1.00.15_1.00.15NA. Affected by this issue is some unknown functionality of the file /BRS_top.html. The manipulation leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Other products might be affected as well. The vendor was contacted early about this disclosure.

Netgear EX8000 V1.0.0.126 is vulnerable to Command Injection via the Iface parameter in the action_wireless function.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the iface parameter in the vif_enable function.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_cancel_wps function.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the devname parameter in the reset_wifi function.

NETGEAR RAX5 (AX1600 WiFi Router) v1.0.2.26 was discovered to contain a command injection vulnerability via the iface parameter in the vif_disable function.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pin_wps function.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pbc_wps function.

A vulnerability was found in Netgear EX6200 1.0.3.94. It has been declared as critical. This vulnerability affects the function sub_54340. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear EX6200 1.0.3.94. It has been classified as critical. This affects the function sub_54014. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear EX6200 1.0.3.94 and classified as critical. Affected by this issue is the function sub_503FC. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Netgear EX6200 1.0.3.94 and classified as critical. Affected by this vulnerability is the function sub_47F7C. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear EX6200 1.0.3.94. Affected is the function sub_41940. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Netgear EX6200 1.0.3.94. This issue affects the function sub_3D0BC. The manipulation of the argument host leads to buffer overflow. The attack may be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Netgear EX6200 1.0.3.94 and classified as critical. This vulnerability affects the function sub_3C8EC. The manipulation of the argument host leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear EX6200 1.0.3.94. This affects the function sub_3C03C. The manipulation of the argument host leads to buffer overflow. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Netgear EX6120 1.0.3.94. Affected by this issue is the function sub_30394. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Netgear EX6120 1.0.0.68. Affected by this vulnerability is the function fwAcosCgiInbound. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear WG302v2 up to 5.2.9 and classified as critical. Affected by this issue is the function ui_get_input_value. The manipulation of the argument host leads to command injection. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been rated as critical. Affected by this issue is the function sub_435E04. The manipulation of the argument host leads to command injection. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been declared as critical. Affected by this vulnerability is the function cmd_wireless. The manipulation of the argument host leads to command injection. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Netgear JWNR2000v2 1.0.0.11. It has been classified as critical. Affected is the function sub_4238E8. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear JWNR2000v2 1.0.0.11. This affects the function sub_41A914. The manipulation of the argument host leads to buffer overflow. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in Netgear JWNR2000v2 1.0.0.11. Affected by this issue is the function get_cur_lang_ver. The manipulation of the argument host leads to buffer overflow. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Netgear JWNR2000v2 1.0.0.11. Affected by this vulnerability is the function default_version_is_new. The manipulation of the argument host leads to buffer overflow. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical has been found in Netgear JWNR2000v2 1.0.0.11. Affected is the function check_language_file. The manipulation of the argument host leads to buffer overflow. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Buffer Overflow vulnerability in Netgear- R61 router V1.0.1.28 allows a remote attacker to execute arbitrary code via the QUERY_STRING key value

Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter pppoe_peer_mac and forcing a reboot. This will result in command injection.

In Netgear WNR854T 1.5.2 (North America), the UPNP service is vulnerable to command injection in the function addmap_exec which parses the NewInternalClient parameter of the AddPortMapping SOAPAction into a system call without sanitation. An attacker can send a specially crafted SOAPAction request for AddPortMapping via the router's WANIPConn1 service to achieve arbitrary command execution.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter get_email. After which, they can visit the send_log.cgi endpoint which uses the parameter in a system call to achieve command execution.

Netgear Inc WNR854T 1.5.2 (North America) contains a stack-based buffer overflow vulnerability in the parse_st_header function due to use of a request header parameter in a strncpy where size is determined based on the input specified. By sending a specially crafted packet, an attacker can take control of the program counter and hijack control flow of the program to execute arbitrary system commands.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Arbitrary command execution in cmd.cgi which allows for the execution of system commands via the web interface.

In Netgear WNR854T 1.5.2 (North America), the UPNP service (/usr/sbin/upnp) is vulnerable to stack-based buffer overflow in the M-SEARCH Host header.