A setup script for fabric interconnect devices in Cisco Unified Computing System (UCS) allows remote attackers to execute arbitrary commands via invalid parameters, aka Bug ID CSCtg20790.

A cluster setup script for fabric interconnect devices in Cisco Unified Computing System (UCS) allows remote attackers to execute arbitrary commands via invalid parameters, aka Bug ID CSCtg20793.

The Authentication, Authorization, and Accounting (AAA) capability in versions 5.0(1) and 5.0(3) of the software used by multiple Cisco Anomaly Detection and Mitigation products, when running with an incomplete TACACS+ configuration without a "tacacs-server host" command, allows remote attackers to bypass authentication and gain privileges, aka Bug ID CSCsd21455.

The buffer overflow trigger in Cisco Security Agent (CSA) before 4.0.3 build 728 waits five minutes for a user response before terminating the process, which could allow remote attackers to bypass the buffer overflow protection by sending additional buffer overflow attacks within the five minute timeout period.

A "logic error" in Cisco IOS 12.0 through 12.4, when a Multiprotocol Label Switching (MPLS) VPN with extended communities is configured, sometimes causes a corrupted route target (RT) to be used, which allows remote attackers to read traffic from other VPNs in opportunistic circumstances.

Unspecified vulnerability in the Multicast Virtual Private Network (MVPN) implementation in Cisco IOS 12.0, 12.2, 12.3, and 12.4 allows remote attackers to create "extra multicast states on the core routers" via a crafted Multicast Distribution Tree (MDT) Data Join message.

The metadata flow feature in Cisco IOS 15.1 through 15.3 and IOS XE 3.3.xXO before 3.3.1XO, 3.6.xS and 3.7.xS before 3.7.6S, and 3.8.xS, 3.9.xS, and 3.10.xS before 3.10.1S allows remote attackers to cause a denial of service (device reload) via malformed RSVP packets, aka Bug ID CSCue22753.

Buffer overflow in the Smart Call Home implementation in Cisco NX-OS on Fabric Interconnects in Cisco Unified Computing System 1.4 before 1.4(1i), NX-OS 5.0 before 5.0(3)U2(2) on Nexus 3000 devices, NX-OS 4.1 before 4.1(2)E1(1l) on Nexus 4000 devices, NX-OS 5.x before 5.1(3)N1(1) on Nexus 5000 devices, NX-OS 5.2 before 5.2(3a) on Nexus 7000 devices, and CG-OS CG4 before CG4(2) on Connected 1000 Connected Grid Routers allows remote SMTP servers to execute arbitrary code via a crafted reply, aka Bug IDs CSCtk00695, CSCts56633, CSCts56632, CSCts56628, CSCug14405, and CSCuf61322.

The ALG module in Cisco IOS 15.0 through 15.4 does not properly implement SIP over NAT, which allows remote attackers to cause a denial of service (device reload) via multipart SDP IPv4 traffic, aka Bug ID CSCun54071.

Buffer overflow in Cisco Advanced Recording Format (ARF) player T27 LD before SP32 EP16, T28 before T28.12, and T29 before T29.2 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption and application crash) via a crafted .arf file, aka Bug IDs CSCui72223, CSCul01163, and CSCul01166.

Buffer overflow in Cisco Advanced Recording Format (ARF) player T27 LD before SP32 EP16, T28 before T28.12, and T29 before T29.2 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption and application crash) via a crafted .arf file that triggers improper LZW decompression, aka Bug ID CSCuj87565.

Buffer overflow in Cisco TelePresence TC Software 4.x and 5.x and TE Software 4.x and 6.0 allows local users to gain privileges by leveraging improper handling of the u-boot compiler flag for internal executable files, aka Bug ID CSCub67693.

Buffer overflow in Cisco TelePresence TC Software 4.x and 5.x and TE Software 4.x and 6.0 allows remote attackers to execute arbitrary code via crafted DNS response packets, aka Bug ID CSCty44804.

Cisco NX-OS 5.0 and earlier on MDS 9000 devices allows remote attackers to cause a denial of service (supervisor CPU consumption) via Authentication Header (AH) authentication in a Virtual Router Redundancy Protocol (VRRP) frame, aka Bug ID CSCte27874.

Cisco Adaptive Security Appliance (ASA) Software, when certain same-security-traffic and management-access options are enabled, allows remote authenticated users to cause a denial of service (stack overflow and device reload) by using the clientless SSL VPN portal for internal-resource browsing, aka Bug ID CSCui51199.

Cisco Unified Communications Manager (aka CUCM or Unified CM) allows remote attackers to cause a denial of service (service restart) via a crafted SIP message, aka Bug ID CSCub54349.

Cisco Intrusion Prevention System (IPS) Software on IPS NME devices before 7.0(9)E4 allows remote attackers to cause a denial of service (device reload) via malformed IPv4 packets that trigger incorrect memory allocation, aka Bug ID CSCua61977.

Cisco Aironet 3600 access points allow remote attackers to cause a denial of service (memory corruption and device crash) by disrupting Cisco Wireless LAN Controller communication and consequently forcing many transitions from FlexConnect mode to Standalone mode, aka Bug ID CSCuh71210.

Array index error in the Virtual Ethernet Module (VEM) kernel driver for VMware ESXi in Cisco NX-OS on the Nexus 1000V, when STUN debugging is enabled, allows remote attackers to cause a denial of service (ESXi crash and purple screen of death) by sending crafted STUN packets to a VEM, aka Bug ID CSCud14825.

Multiple buffer overflows in the Cisco Discovery Protocol (CDP) implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(4) and 6.x before 6.1(1), Nexus 5000 and 5500 devices 4.x and 5.x before 5.1(3)N1(1), Nexus 4000 devices before 4.1(2)E1(1h), Nexus 3000 devices 5.x before 5.0(3)U3(1), Nexus 1000V devices 4.x before 4.2(1)SV1(5.1), MDS 9000 devices 4.x and 5.x before 5.2(4), Unified Computing System (UCS) 6100 and 6200 devices before 2.0(2m), and Connected Grid Router (CGR) 1000 devices before CG4(1) allow remote attackers to execute arbitrary code via malformed CDP packets, aka Bug IDs CSCtu10630, CSCtu10551, CSCtu10550, CSCtw56581, CSCtu10548, CSCtu10544, and CSCuf61275.

Multiple buffer overflows in the (1) SNMP and (2) License Manager implementations in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(5) and 6.x before 6.1(1) and MDS 9000 devices 4.x and 5.x before 5.2(5) allow remote authenticated users to execute arbitrary code via a crafted SNMP request, aka Bug ID CSCtx54830.

Buffer overflow in the Intelligent Platform Management Interface (IPMI) functionality in the Manager component in Cisco Unified Computing System (UCS) 1.0 and 1.1 before 1.1(1j) and 1.2 before 1.2(1b) allows remote attackers to execute arbitrary code via malformed data in a UDP packet, aka Bug ID CSCtd32371.

The RSVP protocol implementation in Cisco IOS 12.2 and 15.0 through 15.2 and IOS XE 3.1.xS through 3.4.xS before 3.4.5S and 3.5.xS through 3.7.xS before 3.7.2S, when MPLS-TE is enabled, allows remote attackers to cause a denial of service (incorrect memory access and device reload) via a traffic engineering PATH message in an RSVP packet, aka Bug ID CSCtg39957.

Stack-based buffer overflow in Cisco WebEx Recording Format (WRF) player T27 LD before SP32 EP16, T27 L10N before SP32_ORION111, and T28 before T28.8 allows remote attackers to execute arbitrary code via a crafted WRF file, aka Bug ID CSCuc27645.

Buffer overflow in the exception handler in Cisco WebEx Recording Format (WRF) player T27 LD before SP32 EP16, T27 L10N before SP32_ORION111, and T28 before T28.8 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted WRF file, aka Bug ID CSCuc27639.

The Smart Install client functionality in Cisco IOS 12.2 and 15.0 through 15.3 on Catalyst switches allows remote attackers to cause a denial of service (device reload) via crafted image list parameters in Smart Install packets, aka Bug ID CSCub55790.

The Ethernet frame-forwarding implementation in Cisco NX-OS on Nexus 7000 devices allows remote attackers to cause a denial of service (forwarding loop and service outage) via a crafted frame, aka Bug ID CSCug47098.

The SNMP module in Cisco IOS XR allows remote authenticated users to cause a denial of service (process restart) via crafted SNMP packets, aka Bug ID CSCue69472.

Cisco Unified Communications Domain Manager allows remote attackers to cause a denial of service (CPU consumption) via a flood of malformed UDP packets, aka Bug ID CSCug47057.

The generic input/output control implementation in Cisco IOS does not properly manage buffers, which allows remote authenticated users to cause a denial of service (device reload) by sending many SNMP requests at the same time, aka Bug ID CSCub41105.

A vulnerability in the gateway GPRS support node (GGSN) of Cisco ASR 5000 Series Aggregation Services Routers 17.3.9.62033 through 21.1.2 could allow an unauthenticated, remote attacker to redirect HTTP traffic sent to an affected device. More Information: CSCvc67927.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

Cisco IOS before 15.3(1)T, when media flow-around is not used, allows remote attackers to cause a denial of service (media loops and stack memory corruption) via VoIP traffic, aka Bug ID CSCub45809.

The DCERPC inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.13) and the Firewall Services Module (FWSM) 4.1 before 4.1(7) in Cisco Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via a crafted DCERPC packet, aka Bug IDs CSCtr21346 and CSCtr27521.

Multiple buffer overflows in the administrative web interface in Cisco Unified Computing System (UCS) allow remote authenticated users to cause a denial of service (memory corruption and session termination) via long string values for unspecified parameters, aka Bug ID CSCtg20751.

The SIP inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.2 before 8.2(5.17), 8.3 before 8.3(2.28), 8.4 before 8.4(2.13), 8.5 before 8.5(1.4), and 8.6 before 8.6(1.5) allows remote attackers to cause a denial of service (device reload) via a crafted SIP media-update packet, aka Bug ID CSCtr63728.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

MCServer in the Cisco Management Controller in Cisco Unified Computing System (UCS) allows local users to cause a denial of service (application crash) via invalid MCTools parameters, aka Bug ID CSCtg20734.

The updateTime function in sensorApp on Cisco IPS 4200 series sensors 7.0 and 7.1 allows remote attackers to cause a denial of service (process crash and traffic-inspection outage) via network traffic, aka Bug ID CSCta96144.

Buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 before LD SP32 EP10 and T28 before T28.4 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted WRF file, aka Bug ID CSCua61331.

Buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 before LD SP32 EP10 and T28 before T28.4 allows remote attackers to execute arbitrary code via a crafted WRF file, aka Bug ID CSCtz72967.

Buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 before LD SP32 EP10 and T28 before T28.4 allows remote attackers to execute arbitrary code via a crafted WRF file, aka Bug ID CSCtz72958.

The DCERPC inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.13) and the Firewall Services Module (FWSM) 4.1 before 4.1(7) in Cisco Catalyst 6500 series switches and 7600 series routers allows remote attackers to cause a denial of service (device reload) via a crafted DCERPC packet, aka Bug IDs CSCtr21376 and CSCtr27524.

Buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 before LD SP32 EP10 and T28 before T28.4 allows remote attackers to execute arbitrary code via a crafted WRF file, aka Bug ID CSCtz73583.

The DMVPN tunnel implementation in Cisco IOS 15.2 allows remote attackers to cause a denial of service (persistent IKE state) via a large volume of hub-to-spoke traffic, aka Bug ID CSCtq39602.

Heap-based buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 before LD SP32 EP10 and T28 before T28.4 allows remote attackers to execute arbitrary code via a crafted WRF file, aka Bug ID CSCtz72850.

Cisco Unified Presence (CUP) before 8.6(3) and Jabber Extensible Communications Platform (aka Jabber XCP) before 5.3 allow remote attackers to cause a denial of service (process crash) via a crafted XMPP stream header, aka Bug ID CSCtu32832.

Buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 before LD SP32 EP10 and T28 before T28.4 allows remote attackers to execute arbitrary code via a crafted WRF file, aka Bug ID CSCua40962.

Buffer overflow in the Smart Call Home feature in the fabric interconnect in Cisco Unified Computing System (UCS) allows remote attackers to cause a denial of service by reading and forging control messages associated with Smart Call Home reports, aka Bug ID CSCtl00198.

Stack-based buffer overflow in the Cisco WebEx Recording Format (WRF) player T27 L through SP11 EP26, T27 LB through SP21 EP10, T27 LC before SP25 EP11, T27 LD before SP32 CP2, and T28 L10N before SP1 allows remote attackers to execute arbitrary code via a crafted DHT chunk in a JPEG image within a WRF file, aka Bug ID CSCtz72953.