Cisco PIX Firewall 515 and 520 with 5.1.4 OS running aaa authentication to a TACACS+ server allows remote attackers to cause a denial of service via a large number of authentication requests.

The Web interface to Cisco 600 routers running CBOS 2.4.1 and earlier allow remote attackers to cause a denial of service via a URL that does not end in a space character.

The ITM web server in Cisco Prime Central for Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (temporary HTTP service outage) via a flood of TCP packets, aka Bug ID CSCuh36313.

A vulnerability in the Session Initiation Protocol (SIP) protocol implementation of Cisco Unified Communications Manager could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of input SIP traffic. An attacker could exploit this vulnerability by sending a malformed SIP packet to an affected Cisco Unified Communications Manager. A successful exploit could allow the attacker to trigger a new registration process on all connected phones, temporarily disrupting service.

Vulnerability in Cisco 7xx series routers allows a remote attacker to cause a system reload via a TCP connection to the router's TELNET port.

OpenSSL 0.9.6 before 0.9.6d does not properly handle unknown message types, which allows remote attackers to cause a denial of service (infinite loop), as demonstrated using the Codenomicon TLS Test Tool.

A vulnerability in the internal packet-processing functionality of the Cisco StarOS operating system running on virtual platforms could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to a logic error that may occur under specific traffic conditions. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to prevent the targeted service interface from receiving any traffic, which would lead to a DoS condition on the affected interface. The device may have to be manually reloaded to recover from exploitation of this vulnerability.

A vulnerability in the web-based management interface of Session Initiation Protocol (SIP) Software for Cisco IP Phone 8800 Series could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software does not restrict the maximum size of certain files that can be written to disk. An attacker who has valid administrator credentials for an affected system could exploit this vulnerability by sending a crafted, remote connection request to an affected system. A successful exploit could allow the attacker to write a file that consumes most of the available disk space on the system, causing application functions to operate abnormally and leading to a DoS condition. This vulnerability affects Cisco IP Phone 8800 Series products running a SIP Software release prior to 12.5(1)SR1.

Cisco VPN 3000 series concentrators and Cisco VPN 3002 Hardware Client 2.x.x through 3.6.7 allows remote attackers to cause a denial of service (reload) via a malformed SSH initialization packet.

Cisco IOS 11.1 through 12.2, when HSRP support is not enabled, allows remote attackers to cause a denial of service (CPU consumption) via randomly sized UDP packets to the Hot Standby Routing Protocol (HSRP) port 1985.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.

Cisco Hosted Collaboration Mediation allows remote attackers to cause a denial of service (CPU consumption) via a flood of malformed UDP packets on port 162, aka Bug ID CSCug85756.

The Cisco Unified IP Conference Station 7937G allows remote attackers to cause a denial of service (networking outage) via a flood of TCP packets, aka Bug ID CSCuh42052.

The DMVPN tunnel implementation in Cisco IOS 15.2 allows remote attackers to cause a denial of service (persistent IKE state) via a large volume of hub-to-spoke traffic, aka Bug ID CSCtq39602.

Buffer overflow in Cisco TACACS+ tac_plus server allows remote attackers to cause a denial of service via a malformed packet with a long length field.

Cisco SN 5420 Storage Router 1.1(5) and earlier allows remote attackers to cause a denial of service (router crash) via an HTTP request with large headers.

Cisco SN 5420 Storage Router 1.1(5) and earlier allows remote attackers to cause a denial of service (halt) via a fragmented packet to the Gigabit interface.

Cisco ONS15454 optical transport platform running ONS 3.1.0 to 3.2.0 allows remote attackers to cause a denial of service (reset) by sending IP packets with non-zero Type of Service (TOS) bits to the Timing Control Card (TCC) LAN interface.

Cisco IP Phone (VoIP) models 7910, 7940, and 7960 allow remote attackers to cause a denial of service (crash) via malformed packets as demonstrated by (1) "jolt", (2) "jolt2", (3) "raped", (4) "hping2", (5) "bloop", (6) "bubonic", (7) "mutant", (8) "trash", and (9) "trash2."

Cisco Virtual Private Network (VPN) Client 3.5.4 and earlier allows remote attackers to cause a denial of service (CPU consumption) via a packet with a zero-length payload.

Cisco IOS 12.0S, 12.2, and 12.3, with Open Shortest Path First (OSPF) enabled, allows remote attackers to cause a denial of service (device reload) via a malformed OSPF packet.

Cisco IOS 12.2 and earlier running Cisco Discovery Protocol (CDP) allows remote attackers to cause a denial of service (memory consumption) via a flood of CDP neighbor announcements.

Denial of service in Cisco routers running NAT via a PORT command from an FTP client to a Telnet port.

Multiple vulnerabilities in the Server Message Block (SMB) Protocol preprocessor detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent or remote attacker to cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

The NAT process on Cisco Adaptive Security Appliances (ASA) devices allows remote attackers to cause a denial of service (connections-table memory consumption) via crafted packets, aka Bug ID CSCue46386.

TMSSNMPService.exe in TelePresence Manager in Cisco TelePresence Management Suite (TMS) on 64-bit platforms allows remote attackers to cause a denial of service (process crash) via SNMP traps, aka Bug ID CSCue00028.

Attackers can crash a Cisco IOS router or device, provided they can get to an interactive prompt (such as a login). This applies to some IOS 9.x, 10.x, and 11.x releases.

Cisco IOS 12.0 and other versions can be crashed by malicious UDP packets to the syslog port.

Land IP denial of service.

Cisco routers and switches running IOS 12.0 through 12.2.1 allows a remote attacker to cause a denial of service via a flood of UDP packets.

The C-Series Rack Server component 1.4 in Cisco Unified Computing System (UCS) does not properly restrict inbound access to ports, which allows remote attackers to cause a denial of service (Integrated Management Controller reboot or hang) via crafted packets, as demonstrated by nmap, aka Bug ID CSCtx19850.

Cisco NX-OS on the Nexus 1000V does not assign the proper priority to heartbeat messages from a Virtual Ethernet Module (VEM) to a Virtual Supervisor Module (VSM), which allows remote attackers to cause a denial of service (false VEM unavailability report) via a flood of UDP packets, aka Bug ID CSCud14840.

Cisco SN 5420 Storage Router 1.1(3) and earlier allows remote attackers to cause a denial of service (reboot) via a series of connections to TCP port 8023.

Memory leak in Cisco Unity Connection 9.x allows remote attackers to cause a denial of service (memory consumption and process crash) by sending many TCP requests, aka Bug ID CSCud59736.

Cisco Tivoli Business Service Manager (TBSM) in Hosted Collaboration Mediation (HCM) in Cisco Hosted Collaboration Solution allows remote attackers to cause a denial of service (temporary service hang) by sending many TCP packets to certain ports, aka Bug ID CSCue03703.

Memory leak in the SNMP process in Cisco IOS XR allows remote attackers to cause a denial of service (memory consumption or process reload) by sending many port-162 UDP packets, aka Bug ID CSCug80345.

Cisco IOS 15.2S allows remote attackers to cause a denial of service (interface queue wedge) via malformed UDP traffic on port 465, aka Bug ID CSCts48300.

Cisco Carrier Routing System (CRS) allows remote attackers to cause a denial of service (packet loss) via short malformed packets that trigger inefficient processing, aka Bug ID CSCud79136.

Cisco Wireless LAN Controller (WLC) devices do not properly address the resource consumption of terminated TELNET sessions, which allows remote attackers to cause a denial of service (TELNET outage) by making many TELNET connections and improperly ending these connections, aka Bug ID CSCug35507.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the RADIUS feature of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause the affected system to stop processing RADIUS packets. This vulnerability is due to improper handling of certain RADIUS requests. An attacker could exploit this vulnerability by attempting to authenticate to a network or a service where the access server is using Cisco ISE as the RADIUS server. A successful exploit could allow the attacker to cause Cisco ISE to stop processing RADIUS requests, causing authentication/authorization timeouts, which would then result in legitimate requests being denied access. Note: To recover the ability to process RADIUS packets, a manual restart of the affected Policy Service Node (PSN) is required. See the Details section for more information.

A vulnerability in the checkpoint manager implementation of Cisco Redundancy Configuration Manager (RCM) for Cisco StarOS Software could allow an unauthenticated, remote attacker to cause the checkpoint manager process to restart upon receipt of malformed TCP data. This vulnerability is due to improper input validation of an ingress TCP packet. An attacker could exploit this vulnerability by sending crafted TCP data to the affected application. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the checkpoint manager process restarting.

A vulnerability in the implementation of the Datagram TLS (DTLS) protocol in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization, resulting in a denial of service (DoS) condition. This vulnerability is due to suboptimal processing that occurs when establishing a DTLS tunnel as part of an AnyConnect SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted DTLS traffic to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected VPN headend device. This could cause existing DTLS tunnels to stop passing traffic and prevent new DTLS tunnels from establishing, resulting in a DoS condition. Note: When the attack traffic stops, the device recovers gracefully.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the local malware analysis process of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to insufficient error handling in the local malware analysis process of an affected device. An attacker could exploit this vulnerability by sending a crafted file through the device. A successful exploit could allow the attacker to cause the local malware analysis process to crash, which could result in a DoS condition. Notes: Manual intervention may be required to recover from this situation. Malware cloud lookup and dynamic analysis will not be impacted.

A vulnerability in the TCP/IP stack of Cisco Email Security Appliance (ESA), Cisco Web Security Appliance (WSA), and Cisco Secure Email and Web Manager, formerly Security Management Appliance, could allow an unauthenticated, remote attacker to crash the Simple Network Management Protocol (SNMP) service, resulting in a denial of service (DoS) condition. This vulnerability is due to an open port listener on TCP port 199. An attacker could exploit this vulnerability by connecting to TCP port 199. A successful exploit could allow the attacker to crash the SNMP service, resulting in a DoS condition.

A vulnerability in the data plane microcode of Lightspeed-Plus line cards for Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the line card to reset. This vulnerability is due to the incorrect handling of malformed packets that are received on the Lightspeed-Plus line cards. An attacker could exploit this vulnerability by sending a crafted IPv4 or IPv6 packet through an affected device. A successful exploit could allow the attacker to cause the Lightspeed-Plus line card to reset, resulting in a denial of service (DoS) condition for any traffic that traverses that line card.

A vulnerability in the Web Admin Interface of Cisco Meeting Server could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient bound checks performed by the affected software. An attacker could exploit this vulnerability by sending a malicious HTTP packet to the affected system. A successful exploit could allow the attacker to cause a reload of the Web Admin Server. Cisco Bug IDs: CSCve89149.

A vulnerability in the gRPC code of Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series Routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition when the emsd service stops. The vulnerability is due to the software's inability to process HTTP/2 packets. An attacker could exploit this vulnerability by sending a malformed HTTP/2 frame to the affected device. A successful exploit could allow the attacker to create a DoS condition when the emsd service stops. Cisco Bug IDs: CSCvb99388.

A vulnerability in SSL traffic decryption for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause depletion of system memory, aka a Firepower Detection Engine SSL Decryption Memory Consumption Denial of Service vulnerability. If this memory leak persists over time, a denial of service (DoS) condition could develop because traffic can cease to be forwarded through the device. The vulnerability is due to an error in how the Firepower Detection Snort Engine handles SSL traffic decryption and notifications to and from the Adaptive Security Appliance (ASA) handler. An attacker could exploit this vulnerability by sending a steady stream of malicious Secure Sockets Layer (SSL) traffic through the device. An exploit could allow the attacker to cause a DoS condition when the device runs low on system memory. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.0.1 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Firepower 2100 Series Security Appliances, Firepower 4100 Series Security Appliances, Firepower 9300 Series Security Appliances. Cisco Bug IDs: CSCve02069.