A vulnerability in the implementation of the Stream Control Transmission Protocol (SCTP) on Cisco Mobility Management Entity (MME) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an eNodeB that is connected to an affected device. The vulnerability is due to insufficient input validation of SCTP traffic. An attacker could exploit this vulnerability by leveraging a man-in-the-middle position between the eNodeB and the MME and then sending a crafted SCTP message to the MME. A successful exploit would cause the MME to stop sending SCTP messages to the eNodeB, triggering a DoS condition.
A vulnerability in the user group configuration of the Cisco SD-WAN Solution could allow an authenticated, local attacker to gain elevated privileges on an affected device. The vulnerability is due to a failure to properly validate certain parameters included within the group configuration. An attacker could exploit this vulnerability by writing a crafted file to the directory where the user group configuration is located in the underlying operating system. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device.
Multiple vulnerabilities in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets by an affected device. An attacker could exploit these vulnerabilities by sending an LDAP packet crafted using Basic Encoding Rules (BER) to an affected device. The LDAP packet must have a source IP address of an LDAP server configured on the targeted device. A successful exploit could cause the affected device to reload, resulting in a DoS condition. Firepower 4100 Series Next-Generation Firewalls are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. Firepower 9300 Security Appliances are affected in versions prior to 2.0.1.201, 2.2.2.54, and 2.3.1.75. MDS 9000 Series Multilayer Switches are affected in versions prior to 8.2(1). Nexus 3000 Series Switches are affected in versions prior to 7.0(3)I7(1). Nexus 3500 Platform Switches are affected in versions prior to 7.0(3)I7(2). Nexus 7000 and 7700 Series Switches are affected in versions prior to 6.2(20), 7.3(2)D1(1), and 8.2(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected in versions prior to 7.0(3)I7(1). UCS 6200 and 6300 Fabric Interconnect are affected in versions prior to 3.2(2b).
The HTTP implementation in Cisco WebEx Node for MCS and WebEx Meetings Server allows remote attackers to read cache files via a crafted request, aka Bug IDs CSCue36664 and CSCue36629.
The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327.
A vulnerability in the bridge protocol data unit (BPDU) forwarding functionality of Cisco Aironet Access Points (APs) could allow an unauthenticated, adjacent attacker to cause an AP port to go into an error disabled state. The vulnerability occurs because BPDUs received from specific wireless clients are forwarded incorrectly. An attacker could exploit this vulnerability on the wireless network by sending a steady stream of crafted BPDU frames. A successful exploit could allow the attacker to cause a limited denial of service (DoS) attack because an AP port could go offline.
Cisco NX-OS on Nexus 5500 devices 4.x and 5.x before 5.0(3)N2(2), Nexus 3000 devices 5.x before 5.0(3)U3(2), and Unified Computing System (UCS) 6200 devices before 2.0(1w) allows remote attackers to cause a denial of service (device reload) by sending a jumbo packet to the management interface, aka Bug IDs CSCtx17544, CSCts10593, and CSCtx95389.
The helper application in Cisco AnyConnect Secure Mobility Client (formerly AnyConnect VPN Client) before 2.5.3041, and 3.0.x before 3.0.629, on Linux and Mac OS X downloads a client executable file (vpndownloader.exe) without verifying its authenticity, which allows remote attackers to execute arbitrary code via the url property to a Java applet, aka Bug ID CSCsy05934.
A vulnerability in the CLI of Cisco TelePresence Collaboration Endpoint (CE), Cisco TelePresence Codec (TC), and Cisco RoomOS Software could allow an authenticated, remote attacker to escalate privileges to an unrestricted user of the restricted shell. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including specific arguments when opening an SSH connection to an affected device. A successful exploit could allow the attacker to gain unrestricted user access to the restricted shell of an affected device.
The IOS HTTP service in Cisco routers and switches running IOS 11.1 through 12.1 allows remote attackers to cause a denial of service by requesting a URL that contains a %% string.
The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.8(1)S5 allows remote attackers to cause a denial of service (device crash) via a malformed header, aka Bug ID CSCsz13590.
The SIP implementation on the Cisco PGW 2200 Softswitch with software 9.7(3)S before 9.7(3)S9 and 9.7(3)P before 9.7(3)P9 allows remote attackers to cause a denial of service (device crash) via a malformed Contact header, aka Bug ID CSCsj98521.
The Web Install ActiveX control (CSDWebInstaller) in Cisco Secure Desktop (CSD) before 3.5.841 does not properly verify the signatures of downloaded programs, which allows remote attackers to force the download and execution of arbitrary files via a crafted web page, aka Bug ID CSCta25876.
Cisco Adaptive Security Appliances (ASA) devices with firmware 8.4 do not properly validate unspecified input related to UNC share pathnames, which allows remote authenticated users to cause a denial of service (device crash) via unknown vectors, aka Bug ID CSCuc65775.
The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.7(3)S11 allows remote attackers to cause a denial of service (device crash) via a malformed packet, aka Bug ID CSCsk32606.
Cisco TFTP Server 1.1 allows remote attackers to cause a denial of service (daemon crash) via a crafted (1) read (aka RRQ) or (2) write (aka WRQ) request, or other TFTP packet. NOTE: some of these details are obtained from third party information.
Cisco WebEx 4.1 on iOS does not verify that the server hostname matches a domain name in the subject's Common Name (CN) or subjectAltName field of the X.509 certificate, which allows man-in-the-middle attackers to spoof SSL servers via an arbitrary valid certificate, aka Bug ID CSCud94176.
Cisco Prime LAN Management Solution (LMS) 4.1 through 4.2.2 on Linux does not properly validate authentication and authorization requests in TCP sessions, which allows remote attackers to execute arbitrary commands via a crafted session, aka Bug ID CSCuc79779.
The SIP implementation on the Cisco PGW 2200 Softswitch with software before 9.7(3)S10 allows remote attackers to cause a denial of service (device crash) via a malformed session attribute, aka Bug ID CSCsk40030.
The CSDWebInstallerCtrl ActiveX control in CSDWebInstaller.ocx in Cisco Secure Desktop (CSD) allows remote attackers to download an unintended Cisco program onto a client machine, and execute this program, by identifying a Cisco program with a Cisco digital signature and then renaming this program to inst.exe, a different vulnerability than CVE-2010-0589 and CVE-2011-0926.
A vulnerability in the web interface of Cisco MATE Live could allow an unauthenticated, remote attacker to view and download the contents of certain web application virtual directories. The vulnerability is due to lack of proper input validation and authorization of HTTP requests. An attacker could exploit this vulnerability by sending a malicious HTTP request to the targeted application. An exploit could allow the attacker to view sensitive information that should require authentication. Cisco Bug IDs: CSCvh31272.
The MGCP implementation on the Cisco PGW 2200 Softswitch with software before 9.7(3)S11 allows remote attackers to cause a denial of service (device crash) via a malformed packet, aka Bug ID CSCsl39126.
A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to read sensitive memory content, create a denial of service (DoS) condition, or execute arbitrary code as root. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow or buffer overread condition in the Cisco Fabric Services component, which could allow the attacker to read sensitive memory content, create a DoS condition, or execute arbitrary code as root. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69951, CSCve02459, CSCve02461, CSCve02463, CSCve02474, CSCve04859.
A vulnerability in the Cisco Fabric Services (CFS) component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69943, CSCve02429, CSCve02433, CSCve02435, CSCve02445, CSCve04859.
The WebLaunch feature in Cisco Secure Desktop before 3.6.6020 does not properly validate binaries that are received by the downloader process, which allows remote attackers to execute arbitrary code via vectors involving (1) ActiveX or (2) Java components, aka Bug IDs CSCtz76128 and CSCtz78204.
A vulnerability in the FTP application layer gateway (ALG) functionality used by Network Address Translation (NAT), NAT IPv6 to IPv4 (NAT64), and the Zone-Based Policy Firewall (ZBFW) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a buffer overflow that occurs when an affected device inspects certain FTP traffic. An attacker could exploit this vulnerability by performing a specific FTP transfer through the device. A successful exploit could allow the attacker to cause the device to reload.
A vulnerability in the web-based management interface of Cisco Unified Contact Center Express (Unified CCX) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker needs valid administrator credentials.
The kernel in Cisco Native Unix (CNU) on Cisco Unified IP Phone 7900 series devices (aka TNP phones) with software before 9.3.1-ES10 does not properly validate unspecified system calls, which allows attackers to execute arbitrary code or cause a denial of service (memory overwrite) via a crafted binary.
Cisco IOS Unified Border Element (CUBE) in Cisco IOS before 15.3(2)T allows remote authenticated users to cause a denial of service (input queue wedge) via a crafted series of RTCP packets, aka Bug ID CSCuc42518.
Multiple vulnerabilities in the CLI of Cisco FXOS Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute commands on the underlying operating system (OS) with root privileges. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by including crafted arguments to specific CLI commands. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges.
A vulnerability in the Open Shortest Path First (OSPF) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software improperly parses certain options in OSPF link-state advertisement (LSA) type 11 packets. An attacker could exploit this vulnerability by sending a crafted LSA type 11 OSPF packet to an affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition for client traffic that is traversing the device.
A vulnerability in Unified Threat Defense (UTD) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper validation of IPv6 packets through the UTD feature. An attacker could exploit this vulnerability by sending IPv6 traffic through an affected device that is configured with UTD. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
Cisco IOS before 15.0(1)XA does not properly handle IRC traffic during a specific time period after an initial reload, which allows remote attackers to cause a denial of service (device reload) via an attempted connection to a certain IRC server, related to a "corrupted magic value," aka Bug ID CSCso05336.
Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allow remote attackers to cause a denial of service (IKE process hang) via malformed NAT-T packets, aka Bug ID CSCsr74439.
The BGP implementation in Cisco IOS 15.2, IOS XE 3.5.xS before 3.5.2S, and IOS XR 4.1.0 through 4.2.2 allows remote attackers to cause a denial of service (multiple connection resets) by leveraging a peer relationship and sending a malformed attribute, aka Bug IDs CSCtt35379, CSCty58300, CSCtz63248, and CSCtz62914.
The DHCPv6 server in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x, 3.1.xS before 3.1.4S, 3.1.xSG and 3.2.xSG before 3.2.5SG, 3.2.xS, 3.2.xXO, 3.3.xS, and 3.3.xSG before 3.3.1SG allows remote attackers to cause a denial of service (device reload) via a malformed DHCPv6 packet, aka Bug ID CSCto57723.
A vulnerability in the command line interface (CLI) of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker with administrative privileges to execute commands on the underlying operating system with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by executing a specific CLI command that includes crafted arguments. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges.
A vulnerability in the RADIUS Change of Authorization (CoA) code of Cisco TrustSec, a feature within Cisco IOS XE Software, could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of a malformed packet. An attacker could exploit this vulnerability by sending a malformed packet to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.
A vulnerability in the file and malware inspection feature of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to bypass the file and malware inspection policies on an affected system. The vulnerability exists because the affected software insufficiently validates incoming traffic. An attacker could exploit this vulnerability by sending a crafted HTTP request through an affected device. A successful exploit could allow the attacker to bypass the file and malware inspection policies and send malicious traffic through the affected device.
Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allow remote attackers to cause a denial of service (traceback) via malformed TCP packets, aka Bug ID CSCsm84110.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) do not properly handle Online Certificate Status Protocol (OCSP) connection failures, which allows remote OCSP responders to cause a denial of service (TCP socket exhaustion) by rejecting connection attempts, aka Bug ID CSCsz36816.
ethanalyzer in the fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to gain privileges by embedding commands in an unspecified parameter, aka Bug ID CSCtq02686.
run-script in the fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to gain privileges by embedding commands in an unspecified parameter, aka Bug ID CSCtq86560.
Cisco IOS before 12.2(33)SXI allows remote authenticated users to cause a denial of service (device reboot).
MCTools in the Cisco Management Controller in Cisco Unified Computing System (UCS) allows local users to gain privileges by entering crafted command-line parameters on a Fabric Interconnect device, aka Bug ID CSCtg20749.
The Intelligent Platform Management Interface (IPMI) implementation in the Blade Management Controller in Cisco Unified Computing System (UCS) allows remote attackers to enumerate valid usernames by observing IPMI interface responses, aka Bug ID CSCtg20761.
The create certreq command in the fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to gain privileges by embedding commands in an unspecified parameter, aka Bug ID CSCtq86563.
The local file editor in the fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to gain privileges, and read or modify arbitrary files, via unspecified key bindings, aka Bug ID CSCtn04521.
The Presence Engine (PE) service in Cisco Unified Presence 6.x before 6.0(7) and 7.x before 7.0(8) does not properly handle an erroneous Contact field in the header of a SIP SUBSCRIBE message, which allows remote attackers to cause a denial of service (process failure) via a malformed message, aka Bug ID CSCtd39629.
The UDP inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.0 before 8.0(5.25), 8.1 before 8.1(2.50), 8.2 before 8.2(5.5), 8.3 before 8.3(2.22), 8.4 before 8.4(2.1), and 8.5 before 8.5(1.2) does not properly handle flows, which allows remote attackers to cause a denial of service (device reload) via a crafted series of (1) IPv4 or (2) IPv6 UDP packets, aka Bug ID CSCtq10441.