An issue was discovered on Moxa AWK-3121 1.14 devices. It provides alert functionality so that an administrator can send emails to his/her account when there are changes to the device's network. However, the same functionality allows an attacker to execute commands on the device. The POST parameters "to1,to2,to3,to4" are all susceptible to buffer overflow. By crafting a packet that contains a string of 678 characters, it is possible for an attacker to execute the attack.

An issue was discovered on Moxa AWK-3121 1.14 devices. It provides functionality so that an administrator can run scripts on the device to troubleshoot any issues. However, the same functionality allows an attacker to execute commands on the device. The POST parameter "iw_filename" is susceptible to buffer overflow. By crafting a packet that contains a string of 162 characters, it is possible for an attacker to execute the attack.

An issue was discovered on Moxa AWK-3121 1.14 devices. It provides functionality so that an administrator can run scripts on the device to troubleshoot any issues. However, the same functionality allows an attacker to execute commands on the device. The POST parameter "iw_serverip" is susceptible to buffer overflow. By crafting a packet that contains a string of 480 characters, it is possible for an attacker to execute the attack.

An issue was discovered on Moxa AWK-3121 1.14 devices. It provides ping functionality so that an administrator can execute ICMP calls to check if the network is working correctly. However, the same functionality allows an attacker to execute commands on the device. The POST parameter "srvName" is susceptible to a buffer overflow. By crafting a packet that contains a string of 516 characters, it is possible for an attacker to execute the attack.

Moxa SoftCMS 1.3 and prior is susceptible to a buffer overflow condition that may crash or allow remote code execution. Moxa released SoftCMS version 1.4 on June 1, 2015, to address the vulnerability.

Moxa SoftCMS 1.3 and prior is susceptible to a buffer overflow condition that may crash or allow remote code execution. Moxa released SoftCMS version 1.4 on June 1, 2015, to address the vulnerability.

Cross-site request forgery (CSRF) vulnerability on Moxa MiiNePort_E1_4641 devices with firmware 1.1.10 Build 09120714, MiiNePort_E1_7080 devices with firmware 1.1.10 Build 09120714, MiiNePort_E2_1242 devices with firmware 1.1 Build 10080614, MiiNePort_E2_4561 devices with firmware 1.1 Build 10080614, and MiiNePort E3 devices with firmware 1.0 Build 11071409 allows remote attackers to hijack the authentication of arbitrary users.

An issue was discovered on Moxa AWK-3121 1.14 devices. The Moxa AWK 3121 provides certfile upload functionality so that an administrator can upload a certificate file used for connecting to the wireless network. However, the same functionality allows an attacker to execute commands on the device. The POST parameter "iw_privatePass" is susceptible to this injection. By crafting a packet that contains shell metacharacters, it is possible for an attacker to execute the attack.

An issue was discovered on Moxa AWK-3121 1.14 devices. The device provides a web interface to allow an administrator to manage the device. However, this interface is not protected against CSRF attacks, which allows an attacker to trick an administrator into executing actions without his/her knowledge, as demonstrated by the forms/iw_webSetParameters and forms/webSetMainRestart URIs.

An issue was discovered on Moxa AWK-3121 1.14 devices. It provides functionality so that an administrator can run scripts on the device to troubleshoot any issues. However, the same functionality allows an attacker to execute commands on the device. The POST parameter "iw_filename" is susceptible to command injection via shell metacharacters.

CSRF tokens are not used in the web application of Moxa OnCell G3100-HSPA Series version 1.4 Build 16062919 and prior, which makes it possible to perform CSRF attacks on the device administrator.

A Cross-Site Request Forgery issue was discovered in Moxa OnCell G3110-HSPA Version 1.3 build 15082117 and previous versions, OnCell G3110-HSDPA Version 1.2 Build 09123015 and previous versions, OnCell G3150-HSDPA Version 1.4 Build 11051315 and previous versions, OnCell 5104-HSDPA, OnCell 5104-HSPA, and OnCell 5004-HSPA. The application does not sufficiently verify if a request was intentionally provided by the user who submitted the request, which could allow an attacker to modify the configuration of the device.

The built-in WEB server for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower has incorrectly implemented protections from session fixation, which may allow an attacker to gain access to a session and hijack it by stealing the user’s cookies.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. A predictable mechanism of generating tokens allows remote attackers to bypass the cross-site request forgery (CSRF) protection mechanism.

Cross-site request forgery has been identified in Moxa IKS and EDS, which may allow for the execution of unauthorized actions on the device.

An exploitable cross-site request forgery vulnerability exists in the web server functionality of Moxa EDR-810 V4.1 build 17030317. A specially crafted HTTP packet can cause cross-site request forgery. An attacker can create malicious HTML to trigger this vulnerability.

An issue was discovered in Moxa SoftCMS versions prior to Version 1.6. A specially crafted URL request sent to the SoftCMS ASP Webserver can cause a double free condition on the server allowing an attacker to modify memory locations and possibly cause a denial of service or the execution of arbitrary code.

An issue was discovered in Moxa ioLogik E1210, firmware Version V2.4 and prior, ioLogik E1211, firmware Version V2.3 and prior, ioLogik E1212, firmware Version V2.4 and prior, ioLogik E1213, firmware Version V2.5 and prior, ioLogik E1214, firmware Version V2.4 and prior, ioLogik E1240, firmware Version V2.3 and prior, ioLogik E1241, firmware Version V2.4 and prior, ioLogik E1242, firmware Version V2.4 and prior, ioLogik E1260, firmware Version V2.4 and prior, ioLogik E1262, firmware Version V2.4 and prior, ioLogik E2210, firmware versions prior to V3.13, ioLogik E2212, firmware versions prior to V3.14, ioLogik E2214, firmware versions prior to V3.12, ioLogik E2240, firmware versions prior to V3.12, ioLogik E2242, firmware versions prior to V3.12, ioLogik E2260, firmware versions prior to V3.13, and ioLogik E2262, firmware versions prior to V3.12. The web application may not sufficiently verify whether a request was provided by a valid user (CROSS-SITE REQUEST FORGERY).

An exploitable Cross-Site Request Forgery vulnerability exists in the Web Application functionality of Moxa AWK-3131A Wireless Access Point running firmware 1.1. A specially crafted form can trick a client into making an unintentional request to the web server which will be treated as an authentic request.

An issue was discovered in Moxa NPort 5110 versions prior to 2.6, NPort 5130/5150 Series versions prior to 3.6, NPort 5200 Series versions prior to 2.8, NPort 5400 Series versions prior to 3.11, NPort 5600 Series versions prior to 3.7, NPort 5100A Series & NPort P5150A versions prior to 1.3, NPort 5200A Series versions prior to 1.3, NPort 5150AI-M12 Series versions prior to 1.2, NPort 5250AI-M12 Series versions prior to 1.2, NPort 5450AI-M12 Series versions prior to 1.2, NPort 5600-8-DT Series versions prior to 2.4, NPort 5600-8-DTL Series versions prior to 2.4, NPort 6x50 Series versions prior to 1.13.11, NPort IA5450A versions prior to v1.4. Requests are not verified to be intentionally submitted by the proper user (CROSS-SITE REQUEST FORGERY).

An Improper Handling of Length Parameter Inconsistency issue was discovered in Moxa OnCell G3100-HSPA Series version 1.4 Build 16062919 and prior. An attacker may be able to edit the element of an HTTP request, causing the device to become unavailable.

Stack-based buffer overflow in MDMUtil.dll in MDMTool.exe in MDM Tool before 2.3 in Moxa Device Manager allows remote MDM Gateways to execute arbitrary code via crafted data in a session on TCP port 54321.

Multiple stack-based buffer overflows in Moxa VPort ActiveX SDK Plus before 2.8 allow remote attackers to insert assembly-code lines via vectors involving a regkey (1) set or (2) get command.

There is Memory corruption in the web interface Moxa OnCell G3100-HSPA Series version 1.6 Build 17100315 and prior, different vulnerability than CVE-2018-11420.

Memory corruption issue was discovered in Moxa OnCell G3470A-LTE Series version 1.6 Build 18021314 and prior, a different vulnerability than CVE-2018-11424.

Certain Moxa Inc products are affected by an improper restriction of operations in EDR-G903 Series Firmware Version 5.5 or lower, EDR-G902 Series Firmware Version 5.5 or lower, and EDR-810 Series Firmware Version 5.6 or lower. Crafted requests sent to the device may allow remote arbitrary code execution.

Stack-based buffer overflow in a certain ActiveX control in MediaDBPlayback.DLL 2.2.0.5 in the Moxa ActiveX SDK allows remote attackers to execute arbitrary code via a long PlayFileName property value.

An issue was discovered in Moxa NPort 5110 versions prior to 2.6, NPort 5130/5150 Series versions prior to 3.6, NPort 5200 Series versions prior to 2.8, NPort 5400 Series versions prior to 3.11, NPort 5600 Series versions prior to 3.7, NPort 5100A Series & NPort P5150A versions prior to 1.3, NPort 5200A Series versions prior to 1.3, NPort 5150AI-M12 Series versions prior to 1.2, NPort 5250AI-M12 Series versions prior to 1.2, NPort 5450AI-M12 Series versions prior to 1.2, NPort 5600-8-DT Series versions prior to 2.4, NPort 5600-8-DTL Series versions prior to 2.4, NPort 6x50 Series versions prior to 1.13.11, NPort IA5450A versions prior to v1.4. Buffer overflow vulnerability may allow an unauthenticated attacker to remotely execute arbitrary code.

Heap-based buffer overflow in the xmlFAParsePosCharGroup function in libxml2 before 2.9.4, as used in Apple iOS before 9.3.2, OS X before 10.11.5, tvOS before 9.2.1, and watchOS before 2.2.1, allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted XML document.

libavcodec/pngenc.c in FFmpeg before 2.8.5 uses incorrect line sizes in certain row calculations, which allows remote attackers to cause a denial of service (out-of-bounds array access) or possibly have unspecified other impact via a crafted .avi file, related to the apng_encode_frame and encode_apng functions.

An issue was discovered in Delta Electronics WPLSoft, Versions prior to V2.42.11, ISPSoft, Versions prior to 3.02.11, and PMSoft, Versions prior to2.10.10. There are multiple instances of heap-based buffer overflows that may allow malicious files to cause the execution of arbitrary code or a denial of service.

OpenGL, as used in Apple iOS before 9.3.2, OS X before 10.11.5, tvOS before 9.2.1, and watchOS before 2.2.1, allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption) via a crafted web site.

Buffer overflow in the Sierra VMD decoder in libavcodec in FFmpeg 0.5.x before 0.5.7, 0.6.x before 0.6.4, 0.7.x before 0.7.9 and 0.8.x before 0.8.8; and in Libav 0.5.x before 0.5.6, 0.6.x before 0.6.4, and 0.7.x before 0.7.3 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a crafted VMD file, related to corrupted streams.

The I420VideoFrame::CreateFrame function in the WebRTC implementation in Mozilla Firefox before 45.0 on Windows omits an unspecified status check, which might allow remote attackers to cause a denial of service (memory corruption) or possibly have other impact via unknown vectors.

Heap-based buffer overflow in the convert_to_idna function in WWW/Library/Implementation/HTParse.c in Lynx 2.8.8dev.1 through 2.8.8dev.4 allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a malformed URL containing a % (percent) character in the domain name.

A buffer overflow vulnerability exists in the handling of the MXIT protocol in Pidgin. Specially crafted MXIT data sent from the server could potentially result in arbitrary code execution. A malicious server or an attacker who intercepts the network traffic can send an invalid size for a packet which will trigger a buffer overflow.

nsvdec.c in libavcodec in FFmpeg 0.7.x before 0.7.12 and 0.8.x before 0.8.11, and in Libav 0.5.x before 0.5.9, 0.6.x before 0.6.6, 0.7.x before 0.7.5, and 0.8.x before 0.8.1, allows remote attackers to cause a denial of service (out-of-bounds read and write) via a crafted NSV file that triggers "use of uninitialized streams."

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Foxit Reader 9.0.1.1049. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within ConvertToPDF_x86.dll. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-5895.

Buffer overflow in TurboPower Abbrevia before 4.0, as used in ScadaTEC ScadaPhone 5.3.11.1230 and earlier, ScadaTEC ModbusTagServer 4.1.1.81 and earlier, and other products, allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted ZIP file.

The directrun function in directmachine.cpp in Libgraphite in Graphite 2 1.2.4, as used in Mozilla Firefox before 43.0 and Firefox ESR 38.x before 38.6.1, does not validate a certain skip operation, which allows remote attackers to execute arbitrary code, obtain sensitive information, or cause a denial of service (out-of-bounds read and application crash) via a crafted Graphite smart font.

Stack-based buffer underflow in the mozilla::gfx::BasePoint4d function in Mozilla Firefox before 48.0 and Firefox ESR 45.x before 45.3 allows remote attackers to execute arbitrary code via crafted two-dimensional graphics data that is mishandled during clipping-region calculations.

Google Chrome before 14.0.835.202 does not properly handle Google V8 hidden objects, which allows remote attackers to cause a denial of service (memory corruption) or possibly have unspecified other impact via crafted JavaScript code.

The WPG parser in ImageMagick before 6.9.4-4 and 7.x before 7.0.1-5, when a memory limit is set, allows remote attackers to have unspecified impact via vectors related to the SetImageExtent return-value check, which trigger (1) a heap-based buffer overflow in the SetPixelIndex function or an invalid write operation in the (2) ScaleCharToQuantum or (3) SetPixelIndex functions.

Heap-based buffer overflow in tcptrack before 1.4.2 might allow attackers to execute arbitrary code via a long command line argument. NOTE: this is only a vulnerability in limited scenarios in which tcptrack is "configured as a handler for other applications." This issue might not qualify for inclusion in CVE.

Multiple buffer overflows in the PDF distiller component in the BlackBerry Attachment Service in BlackBerry Enterprise Server 5.0.0 through 5.0.2, 4.1.6, and 4.1.7 allow remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a crafted PDF document.

Heap-based buffer overflow in the AVI_ChunkRead_strf function in libavi.c in the AVI demuxer in VideoLAN VLC media player before 1.1.11 allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted AVI media file.

LibTIFF before 3.9.2-5.2.1 in SUSE openSUSE 11.3 allows remote attackers to cause a denial of service (memory corruption) or possibly execute arbitrary code via a crafted TIFF image.

Heap-based buffer overflow in the ldns_rr_new_frm_str_internal function in ldns before 1.6.11 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code via a Resource Record (RR) with an unknown type containing input that is longer than a specified length.

In ixheaacd_dec_data_init of ixheaacd_create.c there is a possible out of write read due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is needed for exploitation. Product: Android. Versions: Android-9. Android ID: A-112766520

The TraceStrokePolygon function in MagickCore/draw.c in ImageMagick before 6.9.4-0 and 7.x before 7.0.1-2 mishandles the relationship between the BezierQuantum value and certain strokes data, which allows remote attackers to cause a denial of service (buffer overflow and application crash) or possibly have unspecified other impact via a crafted file.