A vulnerability in the EtherChannel port subscription logic of Cisco Nexus 9500 Series Switches could allow an unauthenticated, remote attacker to bypass access control list (ACL) rules that are configured on an affected device. This vulnerability is due to oversubscription of resources that occurs when applying ACLs to port channel interfaces. An attacker could exploit this vulnerability by attempting to access network resources that are protected by the ACL. A successful exploit could allow the attacker to access network resources that would be protected by the ACL that was applied on the port channel interface.

A vulnerability in the Link Layer Discovery Protocol (LLDP) for Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, adjacent attacker to disable switching on a small form-factor pluggable (SFP) interface. This vulnerability is due to incomplete validation of the source of a received LLDP packet. An attacker could exploit this vulnerability by sending a crafted LLDP packet on an SFP interface to an affected device. A successful exploit could allow the attacker to disable switching on the SFP interface, which could disrupt network traffic.

A vulnerability in the fabric infrastructure file system access control of Cisco Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an authenticated, local attacker to read arbitrary files on an affected system. This vulnerability is due to improper access control. An attacker with Administrator privileges could exploit this vulnerability by executing a specific vulnerable command on an affected device. A successful exploit could allow the attacker to read arbitrary files on the file system of the affected device.

A vulnerability in Cisco Webex Meetings for Android could allow an authenticated, remote attacker to modify the avatar of another user. This vulnerability is due to improper authorization checks. An attacker could exploit this vulnerability by sending a crafted request to the Cisco Webex Meetings client of a targeted user of a meeting in which they are both participants. A successful exploit could allow the attacker to modify the avatar of the targeted user.

A vulnerability in the Java Management Extensions (JMX) component of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to an unsecured TCP/IP port. An attacker could exploit this vulnerability by accessing the port and restarting the JMX process. A successful exploit could allow the attacker to cause a DoS condition on an affected system.

A vulnerability in the boot logic of Cisco Access Points Software could allow an authenticated, local attacker to execute unsigned code at boot time. The vulnerability is due to an improper check that is performed by the area of code that manages system startup processes. An attacker could exploit this vulnerability by modifying a specific file that is stored on the system, which would allow the attacker to bypass existing protections. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. Note: To exploit this vulnerability, the attacker would need to have access to the development shell (devshell) on the device.

A vulnerability in the IPv6 traffic processing of Cisco IOS XR Software and Cisco NX-OS Software for certain Cisco devices could allow an unauthenticated, remote attacker to bypass an IPv6 access control list (ACL) that is configured for an interface of an affected device. The vulnerability is due to improper processing of IPv6 traffic that is sent through an affected device. An attacker could exploit this vulnerability by sending crafted IPv6 packets that traverse the affected device. A successful exploit could allow the attacker to access resources that would typically be protected by the interface ACL.

Cisco Application Policy Infrastructure Controller (APIC) devices with software before 1.0(3h) and 1.1 before 1.1(1j) and Nexus 9000 ACI Mode switches with software before 11.0(3h) and 11.1 before 11.1(1j) allow remote authenticated users to bypass intended RBAC restrictions via crafted REST requests, aka Bug ID CSCut12998.

The RBAC implementation in Cisco ASA-CX Content-Aware Security software before 9.3.1.1(112) and Cisco Prime Security Manager (PRSM) software before 9.3.1.1(112) allows remote authenticated users to change arbitrary passwords via a crafted HTTP request, aka Bug ID CSCuo94842.

The API web interface in Cisco Prime Infrastructure before 3.1 and Cisco Evolved Programmable Network Manager before 1.2.4 allows remote authenticated users to bypass intended RBAC restrictions and obtain sensitive information, and consequently gain privileges, via crafted JSON data, aka Bug ID CSCuy12409.

Cisco Prime Infrastructure 2.2(2) does not properly restrict use of IFRAME elements, which makes it easier for remote attackers to conduct clickjacking attacks and unspecified other attacks via a crafted web site, related to a "cross-frame scripting (XFS)" issue, aka Bug ID CSCuw65846, a different vulnerability than CVE-2015-6434.

Multiple clientless SSL VPN products that run in web browsers, including Stonesoft StoneGate; Cisco ASA; SonicWALL E-Class SSL VPN and SonicWALL SSL VPN; SafeNet SecureWire Access Gateway; Juniper Networks Secure Access; Nortel CallPilot; Citrix Access Gateway; and other products, when running in configurations that do not restrict access to the same domain as the VPN, retrieve the content of remote URLs from one domain and rewrite them so they originate from the VPN's domain, which violates the same origin policy and allows remote attackers to conduct cross-site scripting attacks, read cookies that originated from other domains, access the Web VPN session to gain access to internal resources, perform key logging, and conduct other attacks. NOTE: it could be argued that this is a fundamental design problem in any clientless VPN solution, as opposed to a commonly-introduced error that can be fixed in separate implementations. Therefore a single CVE has been assigned for all products that have this design

Cisco Unified Web and E-Mail Interaction Manager 9.0(2) improperly performs authorization, which allows remote authenticated users to remove default messaging-queue system folders via unspecified vectors, aka Bug ID CSCuo89046.

A vulnerability in the account management subsystem of Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to elevate privileges to root. The attacker must authenticate with valid administrator credentials. The vulnerability is due to improper implementation of access controls. An attacker could exploit this vulnerability by authenticating to the device as a specific user to gain the information needed to elevate privileges to root in a separate login shell. A successful exploit could allow the attacker to escape the CLI subshell and execute system-level commands on the underlying operating system as root. Cisco Bug IDs: CSCvj93548.

Cisco ASR 9000 devices with software 5.3.0.BASE do not recognize that certain ACL entries have a single-host constraint, which allows remote attackers to bypass intended network-resource access restrictions by using an address that was not supposed to have been allowed, aka Bug ID CSCur28806.

Cisco TelePresence T, TelePresence TE, and TelePresence TC before 7.1 do not properly implement access control, which allows remote attackers to obtain root privileges by sending packets on the local network and allows physically proximate attackers to obtain root privileges via unspecified vectors, aka Bug ID CSCub67651.

Multiple vulnerabilities in the web UI and API endpoints of Cisco Application Policy Infrastructure Controller (APIC) or Cisco Cloud APIC could allow a remote attacker to perform a command injection or file upload attack on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system. The vulnerability is due to insufficient authorization checking on an affected system. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to gain privileges beyond what would normally be authorized for their configured user authorization level. This could allow the attacker to modify the configuration of an affected system.

A vulnerability in the file system permissions of Cisco IOS XE Software could allow an authenticated, local attacker to obtain read and write access to critical configuration or system files. The vulnerability is due to insufficient file system permissions on an affected device. An attacker could exploit this vulnerability by connecting to an affected device's guest shell, and accessing or modifying restricted files. A successful exploit could allow the attacker to view or modify restricted information or configurations that are normally not accessible to system administrators.

A vulnerability in the scheduled meeting template feature of Cisco Webex Meetings could allow an authenticated, remote attacker to create a scheduled meeting template that would belong to another user in their organization. The vulnerability is due to insufficient authorization enforcement for the creation of scheduled meeting templates. An attacker could exploit this vulnerability by sending a crafted request to the Webex Meetings interface to create a scheduled meeting template. A successful exploit could allow the attacker to create a scheduled meeting template that would belong to a user other than themselves.

A vulnerability in the Cisco IOS XE ROM Monitor (ROMMON) Software for Cisco 4000 Series Integrated Services Routers, Cisco ASR 920 Series Aggregation Services Routers, Cisco ASR 1000 Series Aggregation Services Routers, and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to break the chain of trust and load a compromised software image on an affected device. The vulnerability is due to the presence of a debugging configuration option in the affected software. An attacker could exploit this vulnerability by connecting to an affected device through the console, forcing the device into ROMMON mode, and writing a malicious pattern using that specific option on the device. A successful exploit could allow the attacker to break the chain of trust and load a compromised software image on the affected device. A compromised software image is any software image that has not been digitally signed by Cisco.

A vulnerability in Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9800 Series Routers could allow an unauthenticated, adjacent attacker to send ICMPv6 traffic prior to the client being placed into RUN state. The vulnerability is due to an incomplete access control list (ACL) being applied prior to RUN state. An attacker could exploit this vulnerability by connecting to the associated service set identifier (SSID) and sending ICMPv6 traffic. A successful exploit could allow the attacker to send ICMPv6 traffic prior to RUN state.

A vulnerability in an access control mechanism of Cisco Cyber Vision Center Software could allow an unauthenticated, remote attacker to bypass authentication and access internal services that are running on an affected device. The vulnerability is due to insufficient enforcement of access control in the software. An attacker could exploit this vulnerability by directly accessing the internal services of an affected device. A successful exploit could allow an attacker to impact monitoring of sensors that are managed by the software.

A vulnerability in the scheduled meeting template feature of Cisco Webex Meetings could allow an authenticated, remote attacker to delete a scheduled meeting template that belongs to another user in their organization. The vulnerability is due to insufficient authorization enforcement for requests to delete scheduled meeting templates. An attacker could exploit this vulnerability by sending a crafted request to the Webex Meetings interface to delete a scheduled meeting template. A successful exploit could allow the attacker to delete a scheduled meeting template that belongs to a user other than themselves.

A vulnerability in the support tunnel feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access the shell of an affected device even though expert mode is disabled. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by enabling the support tunnel, setting a key, and deriving the tunnel password. A successful exploit could allow the attacker to run any system command with root access on an affected device.

The proxy engine in Cisco Advanced Malware Protection (AMP), when used with Email Security Appliance (ESA) 9.5.0-201, 9.6.0-051, and 9.7.0-125, allows remote attackers to bypass intended content restrictions via a malformed e-mail message containing an encoded file, aka Bug ID CSCux45338.

A vulnerability in the web-based management interface of Cisco AsyncOS for Cisco Content Security Management Appliance (SMA) could allow an unauthenticated, remote attacker to obtain sensitive network information.

A vulnerability in the application policy configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data on an affected device. The vulnerability is due to insufficient application identification. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data.

A vulnerability in the management access list configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured management interface access list on an affected system. The vulnerability is due to the configuration of different management access lists, with ports allowed in one access list and denied in another. An attacker could exploit this vulnerability by sending crafted remote management traffic to the local IP address of an affected system. A successful exploit could allow the attacker to bypass the configured management access list policies, and traffic to the management interface would not be properly denied.

A vulnerability in the access control list (ACL) functionality of the standby route processor management interface of Cisco IOS XR Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the standby route processor management Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XR Software, which prevents the ACL from working when applied against the standby route processor management interface. An attacker could exploit this vulnerability by attempting to access the device through the standby route processor management interface.

A vulnerability in the web application of Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an unauthenticated, remote attacker to create arbitrary user accounts. The vulnerability is due to the lack of authorization controls in the web application. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to add user accounts to the configuration of an affected device. These accounts would not be administrator or operator accounts.

A vulnerability in the 802.1X feature of Cisco Catalyst 2960-L Series Switches and Cisco Catalyst CDB-8P Switches could allow an unauthenticated, adjacent attacker to forward broadcast traffic before being authenticated on the port. The vulnerability exists because broadcast traffic that is received on the 802.1X-enabled port is mishandled. An attacker could exploit this vulnerability by sending broadcast traffic on the port before being authenticated. A successful exploit could allow the attacker to send and receive broadcast traffic on the 802.1X-enabled port before authentication.

A vulnerability in Cisco Webex Meetings Suite sites and Cisco Webex Meetings Online sites could allow an unauthenticated, remote attendee to join a password-protected meeting without providing the meeting password. The connection attempt must initiate from a Webex mobile application for either iOS or Android. The vulnerability is due to unintended meeting information exposure in a specific meeting join flow for mobile applications. An unauthorized attendee could exploit this vulnerability by accessing a known meeting ID or meeting URL from the mobile device’s web browser. The browser will then request to launch the device’s Webex mobile application. A successful exploit could allow the unauthorized attendee to join the password-protected meeting. The unauthorized attendee will be visible in the attendee list of the meeting as a mobile attendee. Cisco has applied updates that address this vulnerability and no user action is required. This vulnerability affects Cisco Webex Meetings Suite sites and Cisco Webex Meetings Online sites releases earlier than 39.11.5 and 40.1.3.

vulnerability within the Multimedia Viewer feature of Cisco Webex Meetings could allow an authenticated, remote attacker to bypass security protections. The vulnerability is due to missing security warning dialog boxes when a room host views shared multimedia files. An authenticated, remote attacker could exploit this vulnerability by using the host role to share files within the Multimedia sharing feature and convincing a former room host to view that file. A warning dialog normally appears cautioning users before the file is displayed; however, the former host would not see that warning dialog, and any shared multimedia would be rendered within the user's browser. The attacker could leverage this behavior to conduct additional attacks by including malicious files within a targeted room host's browser window.

A vulnerability in role-based access control of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow a read-only authenticated, remote attacker to disable user accounts on an affected system. The vulnerability is due to incorrect allocation of the enable/disable action button under the role-based access control code on an affected system. An attacker could exploit this vulnerability by authenticating as a read-only user and then updating the roles of other users to disable them. A successful exploit could allow the attacker to disable users, including administrative users.

A vulnerability in the enhanced Preboot eXecution Environment (PXE) boot loader for Cisco IOS XR 64-bit Software could allow an unauthenticated, remote attacker to execute unsigned code during the PXE boot process on an affected device. The PXE boot loader is part of the BIOS and runs over the management interface of hardware platforms that are running Cisco IOS XR Software only. The vulnerability exists because internal commands that are issued when the PXE network boot process is loading a software image are not properly verified. An attacker could exploit this vulnerability by compromising the PXE boot server and replacing a valid software image with a malicious one. Alternatively, the attacker could impersonate the PXE boot server and send a PXE boot reply with a malicious file. A successful exploit could allow the attacker to execute unsigned code on the affected device. Note: To fix this vulnerability, both the Cisco IOS XR Software and the BIOS must be upgraded. The BIOS code is included in Cisco IOS XR Software but might require additional installation steps. For further information, see the Fixed Software section of this advisory.

A vulnerability in the access control functionality of Cisco IoT Field Network Director (FND) could allow an authenticated, remote attacker to view lists of users from different domains that are configured on an affected system. The vulnerability is due to improper access control. An attacker could exploit this vulnerability by sending an API request that alters the domain for a requested user list on an affected system. A successful exploit could allow the attacker to view lists of users from different domains on the affected system.

A vulnerability in the SOAP API of Cisco IoT Field Network Director (FND) could allow an authenticated, remote attacker to access and modify information on devices that belong to a different domain. The vulnerability is due to insufficient authorization in the SOAP API. An attacker could exploit this vulnerability by sending SOAP API requests to affected devices for devices that are outside their authorized domain. A successful exploit could allow the attacker to access and modify information on devices that belong to a different domain.

A vulnerability in the user management functionality of Cisco IoT Field Network Director (FND) could allow an authenticated, remote attacker to manage user information for users in different domains on an affected system. The vulnerability is due to improper domain access control. An attacker could exploit this vulnerability by manipulating JSON payloads to target different domains on an affected system. A successful exploit could allow the attacker to manage user information for users in different domains on an affected system.

A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to cause a DoS condition on a remotely managed router. This vulnerability is due to improper error handling. An attacker could exploit this vulnerability by submitting crafted input to the web-based management interface. A successful exploit could allow the attacker to request unauthorized files from a remote router, causing the router to reload and resulting in a DoS condition.

Cisco Identity Services Engine (ISE) before 2.0 allows remote authenticated users to bypass intended web-resource access restrictions via a direct request, aka Bug ID CSCuu45926.

Cisco IOS 15.2(04)M6 and 15.4(03)S lets physical-interface ACLs supersede tunnel-interface ACLs, which allows remote attackers to bypass intended network-traffic restrictions in opportunistic circumstances by using a tunnel, aka Bug ID CSCur01042.

Cisco TelePresence TC before 7.3.4 on Integrator C devices allows remote attackers to bypass authentication via vectors involving multiple request parameters, aka Bug ID CSCuv00604.

Cisco Unified Web and E-Mail Interaction Manager 9.0(2) and 11.0(1) improperly performs authorization, which allows remote authenticated users to read or write to stored data via unspecified vectors, aka Bug ID CSCuo89056.

The failover ipsec implementation in Cisco Adaptive Security Appliance (ASA) Software 9.1 before 9.1(6), 9.2 before 9.2(3.3), and 9.3 before 9.3(3) does not properly validate failover communication messages, which allows remote attackers to reconfigure an ASA device, and consequently obtain administrative control, by sending crafted UDP packets over the local network to the failover interface, aka Bug ID CSCur21069.

The Management Interface on Cisco Content Services Switch (CSS) 11500 devices 8.20.4.02 and earlier allows remote attackers to bypass intended restrictions on local-network device access via crafted SSH packets, aka Bug ID CSCut14855.

Cisco Virtual TelePresence Server Software does not properly restrict use of the serial port, which allows local users to execute arbitrary OS commands as root by leveraging vSphere controller administrative privileges, aka Bug ID CSCus61123.

The Posture module for Cisco Identity Services Engine (ISE), as distributed in Cisco AnyConnect Secure Mobility Client 4.0(64), allows local users to gain privileges via unspecified commands, aka Bug ID CSCut05797.

A vulnerability in the restricted security domain implementation of Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to read, modify, or delete non-tenant policies (for example, access policies) created by users associated with a different security domain on an affected system. This vulnerability is due to improper access control when restricted security domains are used to implement multi-tenancy for policies outside the tenant boundaries. An attacker with a valid user account associated with a restricted security domain could exploit this vulnerability. A successful exploit could allow the attacker to read, modify, or delete policies created by users associated with a different security domain. Exploitation is not possible for policies under tenants that an attacker has no authorization to access.