Cisco Unified Web and E-Mail Interaction Manager 9.0(2) and 11.0(1) improperly performs authorization, which allows remote authenticated users to read or write to stored data via unspecified vectors, aka Bug ID CSCuo89056.

A vulnerability in the web management interface of Cisco AsyncOS Software for Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform an unauthorized system reset on an affected device. The vulnerability is due to improper authorization controls for a specific URL in the web management interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could have a twofold impact: the attacker could either change the administrator password, gaining privileged access, or reset the network configuration details, causing a denial of service (DoS) condition. In both scenarios, manual intervention is required to restore normal operations.

A vulnerability in the administrative web interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to gain additional privileges on an affected device. The vulnerability is due to improper controls on certain pages in the web interface. An attacker could exploit this vulnerability by authenticating to the device with an administrator account and sending a crafted HTTP request. A successful exploit could allow the attacker to create additional Admin accounts with different user roles. An attacker could then use these accounts to perform actions within their scope. The attacker would need valid Admin credentials for the device. This vulnerability cannot be exploited to add a Super Admin account.

A vulnerability in certain authentication controls in the account services of Cisco Spark could allow an authenticated, remote attacker to interact with and view information on an affected device that would normally be prohibited. The vulnerability is due to the improper display of user-account tokens generated in the system. An attacker could exploit this vulnerability by logging in to the device with a token in use by another account. Successful exploitation could allow the attacker to cause a partial impact to the device's confidentiality, integrity, and availability. Cisco Bug IDs: CSCvg05206.

Cisco Application Policy Infrastructure Controller (APIC) devices with software before 1.0(3h) and 1.1 before 1.1(1j) and Nexus 9000 ACI Mode switches with software before 11.0(3h) and 11.1 before 11.1(1j) allow remote authenticated users to bypass intended RBAC restrictions via crafted REST requests, aka Bug ID CSCut12998.

The RBAC implementation in Cisco ASA-CX Content-Aware Security software before 9.3.1.1(112) and Cisco Prime Security Manager (PRSM) software before 9.3.1.1(112) allows remote authenticated users to change arbitrary passwords via a crafted HTTP request, aka Bug ID CSCuo94842.

A vulnerability in the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary code with vmanage user privileges or cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient access restrictions to the HTTP management interface of the affected solution. An attacker could exploit this vulnerability by sending a malicious HTTP request to the affected management service through an authenticated device. A successful exploit could allow the attacker to execute arbitrary code with vmanage user privileges or stop HTTP services on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69976.

A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) Software could allow an authenticated, remote attacker to bypass authorization on an affected device and access sensitive information that is related to the device. The vulnerability exists because the affected software allows users to access resources that are intended for administrators only. An attacker could exploit this vulnerability by submitting a crafted URL to an affected device. A successful exploit could allow the attacker to add, delete, and edit certain network configurations in the same manner as a user with administrative privileges.

The default configuration of Cisco ASA 5500 Series Adaptive Security Appliance (Cisco ASA) 7.0, 7.1, 7.2, 8.0, 8.1, and 8.2 allows portal traffic to access arbitrary backend servers, which might allow remote authenticated users to bypass intended access restrictions and access unauthorized web sites via a crafted URL obfuscated with ROT13 and a certain encoding. NOTE: this issue was originally reported as a vulnerability related to lack of restrictions to URLs listed in the Cisco WebVPN bookmark component, but the vendor states that "The bookmark feature is not a security feature."

SQL injection vulnerability in the web framework in Cisco Prime Collaboration Assurance 10.5(1) allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors, aka Bug ID CSCus39887.

SQL injection vulnerability in the web framework in Cisco Prime Service Catalog 11.0 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors, aka Bug ID CSCuw50843.

Cisco RV110W, RV130W, and RV215W devices have an incorrect RBAC configuration for the default account, which allows remote authenticated users to obtain root access via a login session with that account, aka Bug IDs CSCuv90139, CSCux58175, and CSCux73557.

SQL injection vulnerability in the web interface in Cisco Unity Connection 9.1(1.2) and earlier allows remote authenticated users to execute arbitrary SQL commands via a crafted POST request, aka Bug ID CSCuv63824.

The default configuration of sshd_config in Cisco Mobility Services Engine (MSE) through 8.0.120.7 allows logins by the oracle account, which makes it easier for remote attackers to obtain access by entering this account's hardcoded password in an SSH session, aka Bug ID CSCuv40501.

The administrative web interface on Cisco DPC3939 (XB3) devices with firmware 121109aCMCST allows remote authenticated users to execute arbitrary commands via unspecified fields, aka Bug ID CSCuw86170.

Cisco Videoscape Distribution Suite Service Manager (VDS-SM) 3.4.0 and earlier does not always use RBAC for backend database access, which allows remote authenticated users to read or write to database entries via (1) the GUI or (2) a crafted HTTP request, aka Bug ID CSCuv87025.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

Multiple vulnerabilities in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary code on an affected device. The vulnerabilities are due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit these vulnerabilities by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user.

Cisco WebEx Meetings Server 2.5MR1 allows remote authenticated users to execute arbitrary code via a crafted command parameter, aka Bug ID CSCus56138.

Cisco TelePresence Video Communication Server (VCS) X8.5.2 allows remote authenticated users to execute arbitrary commands in the context of the nobody user account via an unspecified web-page parameter, aka Bug ID CSCuv12333.

The administrator web interface in Cisco TelePresence Video Communication Server (VCS) X8.5.2 allows remote authenticated users to execute arbitrary OS commands via crafted HTTP requests, aka Bug ID CSCuv11796.

A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to elevate privileges and execute commands with higher privileges. The vulnerability is due to insufficient authorization of the System Operator role capabilities. An attacker could exploit this vulnerability by logging in with the System Operator role, performing a series of actions, and then assuming a new higher privileged role. A successful exploit could allow the attacker to perform all actions associated with the privilege of the assumed role. If that role is an administrative role, the attacker would gain full access to the device.

SQL injection vulnerability in the Management Center for Cisco Security Agents 5.1 before 5.1.0.117, 5.2 before 5.2.0.296, and 6.0 before 6.0.1.132 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors.

A vulnerability in the web-based management interface of Cisco Prime Collaboration Provisioning Software could allow an authenticated, remote attacker to conduct SQL injection attacks on an affected system. The vulnerability exists because the web-based management interface improperly validates user input for specific SQL queries. An attacker could exploit this vulnerability by authenticating to the application with valid administrative credentials and sending malicious requests to an affected system. A successful exploit could allow the attacker to view information that they are not authorized to view, make changes to the system that they are not authorized to make, or delete information from the database that they are not authorized to delete.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to utilize parts of the web UI for which they are not authorized.The vulnerability is due to insufficient authorization of web UI access requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web UI. A successful exploit could allow the attacker to utilize parts of the web UI for which they are not authorized. This could allow a Read-Only user to perform actions of an Admin user.

Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to elevate privileges to the level of an Administrator user on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to inject IOS commands to an affected device. The injected commands should require a higher privilege level in order to be executed. The vulnerability is due to insufficient input validation of specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific web UI endpoint on an affected device. A successful exploit could allow the attacker to inject IOS commands to the affected device, which could allow the attacker to alter the configuration of the device or cause a denial of service (DoS) condition.

A vulnerability in the REST API endpoint of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker with a low-privileged account to bypass authorization on the API of an affected device. The vulnerability is due to insufficient authorization of certain API functions. An attacker could exploit this vulnerability by sending a crafted request to the API using low-privileged credentials. A successful exploit could allow the attacker to perform arbitrary actions through the REST API with administrative privileges.

SQL injection vulnerability in Cisco Unified MeetingPlace 8.6(1.2) allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors, aka Bug ID CSCuu54037.

A vulnerability in the REST API endpoint of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to elevate privileges on the application. The vulnerability is due to insufficient access control validation. An attacker could exploit this vulnerability by authenticating with a low-privilege account and sending a crafted request to the API. A successful exploit could allow the attacker to interact with the API with administrative privileges.

A vulnerability in the Smart Licensing Manager service of the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker to inject arbitrary commands that could be executed with root privileges. The vulnerability is due to insufficient input validation of certain Smart Licensing configuration parameters. An authenticated attacker could exploit the vulnerability by configuring a malicious URL within the affected feature. A successful exploit could allow the attacker to execute arbitrary commands with root privileges. This vulnerability affects the following Cisco Firepower Security products running FX-OS code trains 1.1.3, 1.1.4, and 2.0.1 (versions 2.1.1, 2.2.1, and 2.2.2 are not affected): Firepower 4100 Series Next-Generation Firewall and Firepower 9300 Security Appliance. Cisco Bug IDs: CSCvb86863.

A vulnerability in the role-based access control (RBAC) functionality of the web management software of Cisco Vision Dynamic Signage Director could allow an authenticated, remote attacker to access resources that they should not be able to access and perform actions that they should not be able to perform. The vulnerability exists because the web management software does not properly handle RBAC. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to view and delete certain screen content on the system that the attacker would not normally have privileges to access.

A vulnerability in Role Based Access Control (RBAC) functionality of Cisco IOS XE Web Management Software could allow a Read-Only authenticated, remote attacker to execute commands or configuration changes as an Admin user. The vulnerability is due to incorrect handling of RBAC for the administration GUI. An attacker could exploit this vulnerability by sending a modified HTTP request to the affected device. An exploit could allow the attacker as a Read-Only user to execute CLI commands or configuration changes as if they were an Admin user.

Multiple vulnerabilities in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary code on an affected device. The vulnerabilities are due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit these vulnerabilities by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV340 Series Routers could allow an authenticated, remote attacker with administrative credentials to execute arbitrary commands on the underlying operating system (OS) as a restricted user. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with administrative privileges on the underlying operating system of an affected device. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input to the web UI. A successful exploit could allow an attacker to execute arbitrary commands with administrative privileges on an affected device.

A vulnerability in the web management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to conduct directory traversal attacks and obtain read and write access to sensitive files on a targeted system. The vulnerability is due to a lack of proper validation of files that are uploaded to an affected device. An attacker could exploit this vulnerability by uploading a crafted file to an affected system. An exploit could allow the attacker to view or modify arbitrary files on the targeted system.

A vulnerability in the Device Manager application of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to inject arbitrary commands on the affected device. The vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending crafted arguments to a specific field within the application. A successful exploit could allow the attacker to run commands as the administrator on the DCNM.

A vulnerability in the video endpoint API (xAPI) of Cisco TelePresence Collaboration Endpoint (CE) Software, Cisco TelePresence Codec (TC) Software, and Cisco RoomOS Software could allow an authenticated, remote attacker to conduct directory traversal attacks on an affected device. The vulnerability is due to insufficient validation of user-supplied input to the xAPI of the affected software. An attacker could exploit this vulnerability by sending a crafted request to the xAPI. A successful exploit could allow the attacker to read and write arbitrary files in the system. To exploit this vulnerability, an attacker would need either an In-Room Control or administrator account.

SQL injection vulnerability in Cisco Unified Communications Manager IM and Presence Service 9.1(1) allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors, aka Bug ID CSCuq46325.

SQL injection vulnerability in Cisco Cloud Network Automation Provisioner (CNAP) 1.0 and 1.1 allows remote authenticated users to execute arbitrary SQL commands via a crafted URL, aka Bug ID CSCuy72175.

Cisco Prime Infrastructure 3.0 allows remote authenticated users to execute arbitrary code via a crafted HTTP request that is mishandled during viewing of a log file, aka Bug ID CSCuw81494.

The Device Manager GUI in Cisco Application Control Engine (ACE) 4710 A5 before A5(3.1) allows remote authenticated users to bypass intended RBAC restrictions and execute arbitrary CLI commands with admin privileges via an unspecified parameter in a POST request, aka Bug ID CSCul84801.

The web-based GUI in Cisco Firepower Management Center 4.x and 5.x before 5.3.1.2 and 5.4.x before 5.4.0.1 and Cisco Adaptive Security Appliance (ASA) Software on 5500-X devices with FirePOWER Services 4.x and 5.x before 5.3.1.2 and 5.4.x before 5.4.0.1 allows remote authenticated users to execute arbitrary commands as root via crafted HTTP requests, aka Bug ID CSCur25513.

A vulnerability in the esc_listener.py script of Cisco Elastic Services Controllers could allow an authenticated, remote attacker to execute arbitrary commands as the tomcat user on an affected system, aka an Authentication Request Processing Arbitrary Command Execution Vulnerability. More Information: CSCvc76642. Known Affected Releases: 2.2(9.76).

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

The administrative web-management portal in Cisco IX 8 (.0.1) and earlier on Cisco TelePresence IX5000 devices does not properly restrict the device-recovery account's access, which allows remote authenticated users to obtain HelpDesk-equivalent privileges by leveraging device-recovery authentication, aka Bug ID CSCus74174.

Multiple SQL injection vulnerabilities in the ACS View reporting interface pages in Cisco Secure Access Control System (ACS) before 5.5 patch 7 allow remote authenticated administrators to execute arbitrary SQL commands via crafted HTTPS requests, aka Bug ID CSCuq79027.

SQL injection vulnerability in the administrative web interface in Cisco Unified Communications Manager 11.0(0.98000.225) allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors, aka Bug IDs CSCut33447 and CSCut33608.