NTP before 4.2.8p9 allows remote attackers to bypass the origin timestamp protection mechanism via an origin timestamp of zero. NOTE: this vulnerability exists because of a CVE-2015-8138 regression.

Integer overflow in the NTP daemon (NTPd) before 4.0 causes the NTP server to return the wrong date/time offset when a client requests a date/time that is more than 34 years away from the server's time.

NTP before 4.2.8p6 and 4.3.x before 4.3.90 allows remote attackers to bypass the origin timestamp validation via a packet with an origin timestamp set to zero.

The ntpq protocol in NTP before 4.2.8p7 allows remote attackers to conduct replay attacks by sniffing the network.

edx-platform before 2017-08-03 allows attackers to trigger password-reset e-mail messages in which the reset link has an attacker-controlled domain name.

go-jose before 1.0.4 suffers from multiple signatures exploitation. The go-jose library supports messages with multiple signatures. However, when validating a signed message the API did not indicate which signature was valid, which could potentially lead to confusion. For example, users of the library might mistakenly read protected header values from an attached signature that was different from the one originally validated.

An authentication bypass vulnerability exists in the cgiserver.cgi Login functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to authentication bypass. An attacker can send an HTTP request to trigger this vulnerability.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

MediaWiki before 1.18.5, and 1.19.x before 1.19.2 allows remote attackers to bypass GlobalBlocking extension IP address blocking and create an account via unspecified vectors.

The default configuration of the auth/saml plugin in Mahara before 1.4.2 sets the "Match username attribute to Remote username" option to false, which allows remote SAML IdP servers to spoof users of other SAML IdP servers by using the same internal username.

Multiple vulnerabilities in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. These vulnerabilities are due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit these vulnerabilities by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should be activated for the ENIP packet.

A relative path traversal vulnerability has been reported to affect QNAP NAS running QTS and QuTS hero. If exploited, this vulnerability allows attackers to modify files that impact system integrity. QNAP have already fixed this vulnerability in the following versions: QTS 4.5.2.1630 Build 20210406 and later QTS 4.3.6.1663 Build 20210504 and later QTS 4.3.3.1624 Build 20210416 and later QuTS hero h4.5.2.1638 Build 20210414 and later QNAP NAS running QTS 4.5.3 are not affected.

Improper access control vulnerability in Smart Touch Call prior to version 1.0.0.5 allows arbitrary webpage loading in webview.

Improper access control vulnerability in SmartThings prior to version 1.7.67.25 allows untrusted applications to cause arbitrary webpage loading in webview.

Improper access control vulnerability in SmartThings prior to version 1.7.67.25 allows untrusted applications to cause local file inclusion in webview.

In Apache Derby 10.1.2.1, 10.2.2.0, 10.3.1.4, and 10.4.1.3, Export processing may allow an attacker to overwrite an existing file.

The Apache HTTP Server 2.4.18 through 2.4.20, when mod_http2 and mod_ssl are enabled, does not properly recognize the "SSLVerifyClient require" directive for HTTP/2 request authorization, which allows remote attackers to bypass intended access restrictions by leveraging the ability to send multiple requests over a single connection and aborting a renegotiation.

The Thrive Optimize WordPress plugin before 1.4.13.3, Thrive Comments WordPress plugin before 1.4.15.3, Thrive Headline Optimizer WordPress plugin before 1.3.7.3, Thrive Leads WordPress plugin before 2.3.9.4, Thrive Ultimatum WordPress plugin before 2.3.9.4, Thrive Quiz Builder WordPress plugin before 2.3.9.4, Thrive Apprentice WordPress plugin before 2.3.9.4, Thrive Visual Editor WordPress plugin before 2.6.7.4, Thrive Dashboard WordPress plugin before 2.3.9.3, Thrive Ovation WordPress plugin before 2.4.5, Thrive Clever Widgets WordPress plugin before 1.57.1 and Rise by Thrive Themes WordPress theme before 2.0.0, Ignition by Thrive Themes WordPress theme before 2.0.0, Luxe by Thrive Themes WordPress theme before 2.0.0, FocusBlog by Thrive Themes WordPress theme before 2.0.0, Minus by Thrive Themes WordPress theme before 2.0.0, Squared by Thrive Themes WordPress theme before 2.0.0, Voice WordPress theme before 2.0.0, Performag by Thrive Themes WordPress theme before 2.0.0, Pressive by Thrive Themes WordPress theme before 2.0.0, Storied by Thrive Themes WordPress theme before 2.0.0, Thrive Themes Builder WordPress theme before 2.2.4 register a REST API endpoint associated with Zapier functionality. While this endpoint was intended to require an API key in order to access, it was possible to access it by supplying an empty api_key parameter in vulnerable versions if Zapier was not enabled. Attackers could use this endpoint to add arbitrary data to a predefined option in the wp_options table.

Crestron AM-100 with firmware 1.6.0.2 and AM-101 with firmware 2.7.0.2 anyone can change the administrator and moderator passwords via the iso.3.6.1.4.1.3212.100.3.2.8.1 and iso.3.6.1.4.1.3212.100.3.2.8.2 OIDs. A remote, unauthenticated attacker can use this vulnerability to change the admin or moderator user's password and gain access to restricted areas on the HTTP interface.

A vulnerability has been found in keerti1924 PHP-MYSQL-User-Login-System 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /edit.php. The manipulation leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-254389 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. It has been declared as critical. This vulnerability affects unknown code of the file /goform/form2NetSniper.cgi. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. This vulnerability affects unknown code of the file /goform/DDNS of the component DDNS Service. The manipulation leads to improper access controls. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. Affected is an unknown function of the file /goform/form2AdvanceSetup.cgi of the component WiFi Settings Handler. The manipulation leads to improper access controls. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210 and classified as critical. Affected by this issue is some unknown functionality of the file /goform/form2IPQoSTcAdd of the component IP QoS Handler. The manipulation leads to improper access controls. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DIR-816 A2 1.10CNB05_R1B011D88210. It has been classified as critical. This affects an unknown part of the file /goform/form2LocalAclEditcfg.cgi of the component ACL Handler. The manipulation leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the EtherChannel port subscription logic of Cisco Nexus 9500 Series Switches could allow an unauthenticated, remote attacker to bypass access control list (ACL) rules that are configured on an affected device. This vulnerability is due to oversubscription of resources that occurs when applying ACLs to port channel interfaces. An attacker could exploit this vulnerability by attempting to access network resources that are protected by the ACL. A successful exploit could allow the attacker to access network resources that would be protected by the ACL that was applied on the port channel interface.

A vulnerability was found in Thecosy IceCMS 2.0.1. It has been rated as critical. Affected by this issue is some unknown functionality of the file /adplanet/PlanetCommentList of the component API. The manipulation leads to improper access controls. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-247886 is the identifier assigned to this vulnerability.

A vulnerability in access control list (ACL) functionality of the Gigabit Ethernet Management interface of Cisco IOS XE Software could allow an unauthenticated, remote attacker to reach the configured IP addresses on the Gigabit Ethernet Management interface. The vulnerability is due to a logic error that was introduced in the Cisco IOS XE Software 16.1.1 Release, which prevents the ACL from working when applied against the management interface. An attacker could exploit this issue by attempting to access the device via the management interface.

A vulnerability in the TCP flags inspection feature for access control lists (ACLs) on Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. The vulnerability is due to incorrect processing of the ACL applied to an interface of an affected device when Cisco Express Forwarding load balancing using the 3-tuple hash algorithm is enabled. An attacker could exploit this vulnerability by sending traffic through an affected device that should otherwise be denied by the configured ACL. An exploit could allow the attacker to bypass protection offered by a configured ACL on the affected device. There are workarounds that address this vulnerability. Affected Cisco IOS XR versions are: Cisco IOS XR Software Release 5.1.1 and later till first fixed. First Fixed Releases: 6.5.2 and later, 6.6.1 and later.

A vulnerability in the access-control logic of the NETCONF over Secure Shell (SSH) of Cisco IOS XR Software may allow connections despite an access control list (ACL) that is configured to deny access to the NETCONF over SSH of an affected device. The vulnerability is due to a missing check in the NETCONF over SSH access control list (ACL). An attacker could exploit this vulnerability by connecting to an affected device using NETCONF over SSH. A successful exploit could allow the attacker to connect to the device on the NETCONF port. Valid credentials are required to access the device. This vulnerability does not affect connections to the default SSH process on the device.

Exponent CMS 2.4 uses PHP reflection to call a method of a controller class, and then uses the method name to check user permission. But, the method name in PHP reflection is case insensitive, and Exponent CMS permits undefined actions to execute by default, so an attacker can use a capitalized method name to bypass the permission check, e.g., controller=expHTMLEditor&action=preview&editor=ckeditor and controller=expHTMLEditor&action=Preview&editor=ckeditor. An anonymous user will be rejected for the former but can access the latter.

IBM UrbanCode Deploy could allow a malicious user to access the Agent Relay ActiveMQ Broker JMX interface and run plugins on the agent.

Nextcloud Server before 9.0.52 & ownCloud Server before 9.0.4 are vulnerable to a content-spoofing attack in the files app. The location bar in the files app was not verifying the passed parameters. An attacker could craft an invalid link to a fake directory structure and use this to display an attacker-controlled error message to the user.

The OG Subgroups module, when used with the Open Atrium module 7.x-2.x before 7.x-2.26 for Drupal, allows remote attackers to access child groups via vectors related to membership inheritance.

The route manager in FlightGear before 2016.4.4 allows remote attackers to write to arbitrary files via a crafted Nasal script.

An issue was discovered in components/com_users/models/registration.php in Joomla! before 3.6.5. Incorrect filtering of registration form data stored to the session on a validation error enables a user to gain access to a registered user's account and reset the user's group mappings, username, and password, as demonstrated by submitting a form that targets the `registration.register` task.

Reset to default settings may occur in Lenovo ThinkServer TSM RD350, RD450, RD550, RD650, TD350 during a prolonged broadcast storm in TSM versions earlier than 3.77.

A vulnerability classified as critical has been found in SourceCodester Student Result Management System 1.0. This affects an unknown part of the file /admin/core/new_user of the component Register Interface. The manipulation leads to improper access controls. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query.

Lack of authorisation checks in the Modern Events Calendar Lite WordPress plugin, versions before 5.16.5, did not properly restrict access to the export files, allowing unauthenticated users to exports all events data in CSV or XML format for example.

NAVER Whale browser mobile app before 1.10.6.2 allows the attacker to bypass its browser unlock function via incognito mode.

A vulnerability in the management access list configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured management interface access list on an affected system. The vulnerability is due to the configuration of different management access lists, with ports allowed in one access list and denied in another. An attacker could exploit this vulnerability by sending crafted remote management traffic to the local IP address of an affected system. A successful exploit could allow the attacker to bypass the configured management access list policies, and traffic to the management interface would not be properly denied.

Improper access control in Citrix ADC and Citrix Gateway versions before 13.0-58.30, 12.1-57.18, 12.0-63.21, 11.1-64.14 and 10.5-70.18 and Citrix SDWAN WAN-OP versions before 11.1.1a, 11.0.3d and 10.2.7 allows unauthenticated access to certain URL endpoints.