In the Linux kernel, the following vulnerability has been resolved: cfg80211: fix race in netlink owner interface destruction My previous fix here to fix the deadlock left a race where the exact same deadlock (see the original commit referenced below) can still happen if cfg80211_destroy_ifaces() already runs while nl80211_netlink_notify() is still marking some interfaces as nl_owner_dead. The race happens because we have two loops here - first we dev_close() all the netdevs, and then we destroy them. If we also have two netdevs (first one need only be a wdev though) then we can find one during the first iteration, close it, and go to the second iteration -- but then find two, and try to destroy also the one we didn't close yet. Fix this by only iterating once.

In the Linux kernel, the following vulnerability has been resolved: ip: Fix a data-race around sysctl_ip_autobind_reuse. While reading sysctl_ip_autobind_reuse, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

In the Linux kernel, the following vulnerability has been resolved: udp: Fix a data-race around sysctl_udp_l3mdev_accept. While reading sysctl_udp_l3mdev_accept, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

Integer overflows were discovered in the functions grub_cmd_initrd and grub_initrd_init in the efilinux component of GRUB2, as shipped in Debian, Red Hat, and Ubuntu (the functionality is not included in GRUB2 upstream), leading to a heap-based buffer overflow. These could be triggered by an extremely large number of arguments to the initrd command on 32-bit architectures, or a crafted filesystem with very large files on any architecture. An attacker could use this to execute arbitrary code and bypass UEFI Secure Boot restrictions. This issue affects GRUB2 version 2.04 and prior versions.

In the Linux kernel, the following vulnerability has been resolved: tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts. While reading sysctl_tcp_thin_linear_timeouts, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

In the Linux kernel, the following vulnerability has been resolved: tcp: Fix a data-race around sysctl_tcp_probe_threshold. While reading sysctl_tcp_probe_threshold, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_fastopen. While reading sysctl_tcp_fastopen, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers.

In the Linux kernel, the following vulnerability has been resolved: tcp: TX zerocopy should not sense pfmemalloc status We got a recent syzbot report [1] showing a possible misuse of pfmemalloc page status in TCP zerocopy paths. Indeed, for pages coming from user space or other layers, using page_is_pfmemalloc() is moot, and possibly could give false positives. There has been attempts to make page_is_pfmemalloc() more robust, but not using it in the first place in this context is probably better, removing cpu cycles. Note to stable teams : You need to backport 84ce071e38a6 ("net: introduce __skb_fill_page_desc_noacc") as a prereq. Race is more probable after commit c07aea3ef4d4 ("mm: add a signature in struct page") because page_is_pfmemalloc() is now using low order bit from page->lru.next, which can change more often than page->index. Low order bit should never be set for lru.next (when used as an anchor in LRU list), so KCSAN report is mostly a false positive. Backporting to older kernel versions seems not necessary. [1] BUG: KCSAN: data-race in lru_add_fn / tcp_build_frag write to 0xffffea0004a1d2c8 of 8 bytes by task 18600 on cpu 0: __list_add include/linux/list.h:73 [inline] list_add include/linux/list.h:88 [inline] lruvec_add_folio include/linux/mm_inline.h:105 [inline] lru_add_fn+0x440/0x520 mm/swap.c:228 folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246 folio_batch_add_and_move mm/swap.c:263 [inline] folio_add_lru+0xf1/0x140 mm/swap.c:490 filemap_add_folio+0xf8/0x150 mm/filemap.c:948 __filemap_get_folio+0x510/0x6d0 mm/filemap.c:1981 pagecache_get_page+0x26/0x190 mm/folio-compat.c:104 grab_cache_page_write_begin+0x2a/0x30 mm/folio-compat.c:116 ext4_da_write_begin+0x2dd/0x5f0 fs/ext4/inode.c:2988 generic_perform_write+0x1d4/0x3f0 mm/filemap.c:3738 ext4_buffered_write_iter+0x235/0x3e0 fs/ext4/file.c:270 ext4_file_write_iter+0x2e3/0x1210 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x468/0x760 fs/read_write.c:578 ksys_write+0xe8/0x1a0 fs/read_write.c:631 __do_sys_write fs/read_write.c:643 [inline] __se_sys_write fs/read_write.c:640 [inline] __x64_sys_write+0x3e/0x50 fs/read_write.c:640 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffffea0004a1d2c8 of 8 bytes by task 18611 on cpu 1: page_is_pfmemalloc include/linux/mm.h:1740 [inline] __skb_fill_page_desc include/linux/skbuff.h:2422 [inline] skb_fill_page_desc include/linux/skbuff.h:2443 [inline] tcp_build_frag+0x613/0xb20 net/ipv4/tcp.c:1018 do_tcp_sendpages+0x3e8/0xaf0 net/ipv4/tcp.c:1075 tcp_sendpage_locked net/ipv4/tcp.c:1140 [inline] tcp_sendpage+0x89/0xb0 net/ipv4/tcp.c:1150 inet_sendpage+0x7f/0xc0 net/ipv4/af_inet.c:833 kernel_sendpage+0x184/0x300 net/socket.c:3561 sock_sendpage+0x5a/0x70 net/socket.c:1054 pipe_to_sendpage+0x128/0x160 fs/splice.c:361 splice_from_pipe_feed fs/splice.c:415 [inline] __splice_from_pipe+0x222/0x4d0 fs/splice.c:559 splice_from_pipe fs/splice.c:594 [inline] generic_splice_sendpage+0x89/0xc0 fs/splice.c:743 do_splice_from fs/splice.c:764 [inline] direct_splice_actor+0x80/0xa0 fs/splice.c:931 splice_direct_to_actor+0x305/0x620 fs/splice.c:886 do_splice_direct+0xfb/0x180 fs/splice.c:974 do_sendfile+0x3bf/0x910 fs/read_write.c:1249 __do_sys_sendfile64 fs/read_write.c:1317 [inline] __se_sys_sendfile64 fs/read_write.c:1303 [inline] __x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1303 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0xffffea0004a1d288 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 18611 Comm: syz-executor.4 Not tainted 6.0.0-rc2-syzkaller-00248-ge022620b5d05-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022

The inotify functionality in Linux kernel 2.6 before 2.6.28-rc5 might allow local users to gain privileges via unknown vectors related to race conditions in inotify watch removal and umount.

A race condition in the x86 KVM subsystem in the Linux kernel through 6.1-rc6 allows guest OS users to cause a denial of service (host OS crash or host OS memory corruption) when nested virtualisation and the TDP MMU are enabled.

An issue was discovered in the Linux kernel through 6.0.9. drivers/media/dvb-core/dvbdev.c has a use-after-free, related to dvb_register_device dynamically allocating fops.

In the Linux kernel, the following vulnerability has been resolved: net: phy: qcom: at803x: fix kernel panic with at8031_probe On reworking and splitting the at803x driver, in splitting function of at803x PHYs it was added a NULL dereference bug where priv is referenced before it's actually allocated and then is tried to write to for the is_1000basex and is_fiber variables in the case of at8031, writing on the wrong address. Fix this by correctly setting priv local variable only after at803x_probe is called and actually allocates priv in the phydev struct.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix performance regression in swap operation The patch "netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test", commit 28628fa9 fixes a race condition. But the synchronize_rcu() added to the swap function unnecessarily slows it down: it can safely be moved to destroy and use call_rcu() instead. Eric Dumazet pointed out that simply calling the destroy functions as rcu callback does not work: sets with timeout use garbage collectors which need cancelling at destroy which can wait. Therefore the destroy functions are split into two: cancelling garbage collectors safely at executing the command received by netlink and moving the remaining part only into the rcu callback.

An issue was discovered in the Linux kernel through 6.0.9. drivers/char/xillybus/xillyusb.c has a race condition and use-after-free during physical removal of a USB device.

A use-after-free vulnerability was found in network namespaces code affecting the Linux kernel before 4.14.11. The function get_net_ns_by_id() in net/core/net_namespace.c does not check for the net::count value after it has found a peer network in netns_ids idr, which could lead to double free and memory corruption. This vulnerability could allow an unprivileged local user to induce kernel memory corruption on the system, leading to a crash. Due to the nature of the flaw, privilege escalation cannot be fully ruled out, although it is thought to be unlikely.

An issue was discovered in the Linux kernel through 6.0.9. drivers/media/dvb-core/dvb_net.c has a .disconnect versus dvb_device_open race condition that leads to a use-after-free.

An issue was discovered in the Linux kernel through 6.0.6. drivers/char/pcmcia/cm4040_cs.c has a race condition and resultant use-after-free if a physically proximate attacker removes a PCMCIA device while calling open(), aka a race condition between cm4040_open() and reader_detach().

An issue was discovered in the Linux kernel through 6.0.6. drivers/char/pcmcia/scr24x_cs.c has a race condition and resultant use-after-free if a physically proximate attacker removes a PCMCIA device while calling open(), aka a race condition between scr24x_open() and scr24x_remove().

An issue was discovered in the Linux kernel through 6.0.6. drivers/char/pcmcia/cm4000_cs.c has a race condition and resultant use-after-free if a physically proximate attacker removes a PCMCIA device while calling open(), aka a race condition between cmm_open() and cm4000_detach().

A race condition was found the Linux kernel in perf_event_open() which can be exploited by an unprivileged user to gain root privileges. The bug allows to build several exploit primitives such as kernel address information leak, arbitrary execution, etc.

nsFrameManager in Firefox 3.x before 3.0.4, Firefox 2.x before 2.0.0.18, Thunderbird 2.x before 2.0.0.18, and SeaMonkey 1.x before 1.1.13 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code by modifying properties of a file input element while it is still being initialized, then using the blur method to access uninitialized memory.

The driver_override implementation in drivers/base/platform.c in the Linux kernel before 4.12.1 allows local users to gain privileges by leveraging a race condition between a read operation and a store operation that involve different overrides.

Race condition in the do_setlk function in fs/nfs/file.c in the Linux kernel before 2.6.26 allows local users to cause a denial of service (crash) via vectors resulting in an interrupted RPC call that leads to a stray FL_POSIX lock, related to improper handling of a race between fcntl and close in the EINTR case.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get() nft_unregister_obj() can concurrent with __nft_obj_type_get(), and there is not any protection when iterate over nf_tables_objects list in __nft_obj_type_get(). Therefore, there is potential data-race of nf_tables_objects list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_objects list in __nft_obj_type_get(), and use rcu_read_lock() in the caller nft_obj_type_get() to protect the entire type query process.

In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: move mmu notification mechanism inside mm lock Move mmu notification mechanism inside mm lock to prevent race condition in other components which depend on it. The notifier will invalidate memory range. Depending upon the number of iterations, different memory ranges would be invalidated. The following warning would be removed by this patch: WARNING: CPU: 0 PID: 5067 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:734 kvm_mmu_notifier_change_pte+0x860/0x960 arch/x86/kvm/../../../virt/kvm/kvm_main.c:734 There is no behavioural and performance change with this patch when there is no component registered with the mmu notifier. [akpm@linux-foundation.org: narrow the scope of `range', per Sean]

Linux kernel: Exploitable memory corruption due to UFO to non-UFO path switch. When building a UFO packet with MSG_MORE __ip_append_data() calls ip_ufo_append_data() to append. However in between two send() calls, the append path can be switched from UFO to non-UFO one, which leads to a memory corruption. In case UFO packet lengths exceeds MTU, copy = maxfraglen - skb->len becomes negative on the non-UFO path and the branch to allocate new skb is taken. This triggers fragmentation and computation of fraggap = skb_prev->len - maxfraglen. Fraggap can exceed MTU, causing copy = datalen - transhdrlen - fraggap to become negative. Subsequently skb_copy_and_csum_bits() writes out-of-bounds. A similar issue is present in IPv6 code. The bug was introduced in e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach") on Oct 18 2005.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix race condition on enabling fast-xmit fast-xmit must only be enabled after the sta has been uploaded to the driver, otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls to the driver, leading to potential crashes because of uninitialized drv_priv data. Add a missing sta->uploaded check and re-check fast xmit after inserting a sta.

In the Linux kernel, the following vulnerability has been resolved: tls: fix race between async notify and socket close The submitting thread (one which called recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete() so any code past that point risks touching already freed data. Try to avoid the locking and extra flags altogether. Have the main thread hold an extra reference, this way we can depend solely on the atomic ref counter for synchronization. Don't futz with reiniting the completion, either, we are now tightly controlling when completion fires.

drivers/video/fbdev/smscufx.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a USB device while calling open(), aka a race condition between ufx_ops_open and ufx_usb_disconnect.

In the Linux kernel, the following vulnerability has been resolved: tls: fix race between tx work scheduling and socket close Similarly to previous commit, the submitting thread (recvmsg/sendmsg) may exit as soon as the async crypto handler calls complete(). Reorder scheduling the work before calling complete(). This seems more logical in the first place, as it's the inverse order of what the submitting thread will do.

roccat_report_event in drivers/hid/hid-roccat.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free in certain situations where a report is received while copying a report->value is in progress.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to truncate meta inode pages forcely Below race case can cause data corruption: Thread A GC thread - gc_data_segment - ra_data_block - locked meta_inode page - f2fs_inplace_write_data - invalidate_mapping_pages : fail to invalidate meta_inode page due to lock failure or dirty|writeback status - f2fs_submit_page_bio : write last dirty data to old blkaddr - move_data_block - load old data from meta_inode page - f2fs_submit_page_write : write old data to new blkaddr Because invalidate_mapping_pages() will skip invalidating page which has unclear status including locked, dirty, writeback and so on, so we need to use truncate_inode_pages_range() instead of invalidate_mapping_pages() to make sure meta_inode page will be dropped.

In the Linux kernel, the following vulnerability has been resolved: hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel"), napi_disable was getting called for all channels, including all subchannels without confirming if they are enabled or not. This caused hv_netvsc getting hung at napi_disable, when netvsc_probe() has finished running but nvdev->subchan_work has not started yet. netvsc_subchan_work() -> rndis_set_subchannel() has not created the sub-channels and because of that netvsc_sc_open() is not running. netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which netvsc_subchan_work did not run. netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the opposite. Now during netvsc_device_remove(), when napi_disable is called for those subchannels, napi_disable gets stuck on infinite msleep. This fix addresses this problem by ensuring that napi_disable() is not getting called for non-enabled NAPI struct. But netif_napi_del() is still necessary for these non-enabled NAPI struct for cleanup purpose. Call trace: [ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002 [ 654.568030] Call Trace: [ 654.571221] <TASK> [ 654.573790] __schedule+0x2d6/0x960 [ 654.577733] schedule+0x69/0xf0 [ 654.581214] schedule_timeout+0x87/0x140 [ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20 [ 654.590291] msleep+0x2d/0x40 [ 654.593625] napi_disable+0x2b/0x80 [ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc] [ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc] [ 654.611101] ? do_wait_intr+0xb0/0xb0 [ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc] [ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus]

In the Linux kernel, the following vulnerability has been resolved: wireguard: receive: annotate data-race around receiving_counter.counter Syzkaller with KCSAN identified a data-race issue when accessing keypair->receiving_counter.counter. Use READ_ONCE() and WRITE_ONCE() annotations to mark the data race as intentional. BUG: KCSAN: data-race in wg_packet_decrypt_worker / wg_packet_rx_poll write to 0xffff888107765888 of 8 bytes by interrupt on cpu 0: counter_validate drivers/net/wireguard/receive.c:321 [inline] wg_packet_rx_poll+0x3ac/0xf00 drivers/net/wireguard/receive.c:461 __napi_poll+0x60/0x3b0 net/core/dev.c:6536 napi_poll net/core/dev.c:6605 [inline] net_rx_action+0x32b/0x750 net/core/dev.c:6738 __do_softirq+0xc4/0x279 kernel/softirq.c:553 do_softirq+0x5e/0x90 kernel/softirq.c:454 __local_bh_enable_ip+0x64/0x70 kernel/softirq.c:381 __raw_spin_unlock_bh include/linux/spinlock_api_smp.h:167 [inline] _raw_spin_unlock_bh+0x36/0x40 kernel/locking/spinlock.c:210 spin_unlock_bh include/linux/spinlock.h:396 [inline] ptr_ring_consume_bh include/linux/ptr_ring.h:367 [inline] wg_packet_decrypt_worker+0x6c5/0x700 drivers/net/wireguard/receive.c:499 process_one_work kernel/workqueue.c:2633 [inline] ... read to 0xffff888107765888 of 8 bytes by task 3196 on cpu 1: decrypt_packet drivers/net/wireguard/receive.c:252 [inline] wg_packet_decrypt_worker+0x220/0x700 drivers/net/wireguard/receive.c:501 process_one_work kernel/workqueue.c:2633 [inline] process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2706 worker_thread+0x525/0x730 kernel/workqueue.c:2787 ...

In the Linux kernel, the following vulnerability has been resolved: mm: swap: fix race between free_swap_and_cache() and swapoff() There was previously a theoretical window where swapoff() could run and teardown a swap_info_struct while a call to free_swap_and_cache() was running in another thread. This could cause, amongst other bad possibilities, swap_page_trans_huge_swapped() (called by free_swap_and_cache()) to access the freed memory for swap_map. This is a theoretical problem and I haven't been able to provoke it from a test case. But there has been agreement based on code review that this is possible (see link below). Fix it by using get_swap_device()/put_swap_device(), which will stall swapoff(). There was an extra check in _swap_info_get() to confirm that the swap entry was not free. This isn't present in get_swap_device() because it doesn't make sense in general due to the race between getting the reference and swapoff. So I've added an equivalent check directly in free_swap_and_cache(). Details of how to provoke one possible issue (thanks to David Hildenbrand for deriving this): --8<----- __swap_entry_free() might be the last user and result in "count == SWAP_HAS_CACHE". swapoff->try_to_unuse() will stop as soon as soon as si->inuse_pages==0. So the question is: could someone reclaim the folio and turn si->inuse_pages==0, before we completed swap_page_trans_huge_swapped(). Imagine the following: 2 MiB folio in the swapcache. Only 2 subpages are still references by swap entries. Process 1 still references subpage 0 via swap entry. Process 2 still references subpage 1 via swap entry. Process 1 quits. Calls free_swap_and_cache(). -> count == SWAP_HAS_CACHE [then, preempted in the hypervisor etc.] Process 2 quits. Calls free_swap_and_cache(). -> count == SWAP_HAS_CACHE Process 2 goes ahead, passes swap_page_trans_huge_swapped(), and calls __try_to_reclaim_swap(). __try_to_reclaim_swap()->folio_free_swap()->delete_from_swap_cache()-> put_swap_folio()->free_swap_slot()->swapcache_free_entries()-> swap_entry_free()->swap_range_free()-> ... WRITE_ONCE(si->inuse_pages, si->inuse_pages - nr_entries); What stops swapoff to succeed after process 2 reclaimed the swap cache but before process1 finished its call to swap_page_trans_huge_swapped()? --8<-----

drivers/char/pcmcia/synclink_cs.c in the Linux kernel through 5.19.12 has a race condition and resultant use-after-free if a physically proximate attacker removes a PCMCIA device while calling ioctl, aka a race condition between mgslpc_ioctl and mgslpc_detach.

An elevation of privilege vulnerability in the Qualcomm Seemp driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as High because it first requires compromising a privileged process. Product: Android. Versions: Kernel-3.18. Android ID: A-33353601. References: QC-CR#1102288.

In the Linux kernel, the following vulnerability has been resolved: quota: Fix potential NULL pointer dereference Below race may cause NULL pointer dereference P1 P2 dquot_free_inode quota_off drop_dquot_ref remove_dquot_ref dquots = i_dquot(inode) dquots = i_dquot(inode) srcu_read_lock dquots[cnt]) != NULL (1) dquots[type] = NULL (2) spin_lock(&dquots[cnt]->dq_dqb_lock) (3) .... If dquot_free_inode(or other routines) checks inode's quota pointers (1) before quota_off sets it to NULL(2) and use it (3) after that, NULL pointer dereference will be triggered. So let's fix it by using a temporary pointer to avoid this issue.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: switchdev: Skip MDB replays of deferred events on offload Before this change, generation of the list of MDB events to replay would race against the creation of new group memberships, either from the IGMP/MLD snooping logic or from user configuration. While new memberships are immediately visible to walkers of br->mdb_list, the notification of their existence to switchdev event subscribers is deferred until a later point in time. So if a replay list was generated during a time that overlapped with such a window, it would also contain a replay of the not-yet-delivered event. The driver would thus receive two copies of what the bridge internally considered to be one single event. On destruction of the bridge, only a single membership deletion event was therefore sent. As a consequence of this, drivers which reference count memberships (at least DSA), would be left with orphan groups in their hardware database when the bridge was destroyed. This is only an issue when replaying additions. While deletion events may still be pending on the deferred queue, they will already have been removed from br->mdb_list, so no duplicates can be generated in that scenario. To a user this meant that old group memberships, from a bridge in which a port was previously attached, could be reanimated (in hardware) when the port joined a new bridge, without the new bridge's knowledge. For example, on an mv88e6xxx system, create a snooping bridge and immediately add a port to it: root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \ > ip link set dev x3 up master br0 And then destroy the bridge: root@infix-06-0b-00:~$ ip link del dev br0 root@infix-06-0b-00:~$ mvls atu ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a DEV:0 Marvell 88E6393X 33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . . 33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . . ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a root@infix-06-0b-00:~$ The two IPv6 groups remain in the hardware database because the port (x3) is notified of the host's membership twice: once via the original event and once via a replay. Since only a single delete notification is sent, the count remains at 1 when the bridge is destroyed. Then add the same port (or another port belonging to the same hardware domain) to a new bridge, this time with snooping disabled: root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \ > ip link set dev x3 up master br1 All multicast, including the two IPv6 groups from br0, should now be flooded, according to the policy of br1. But instead the old memberships are still active in the hardware database, causing the switch to only forward traffic to those groups towards the CPU (port 0). Eliminate the race in two steps: 1. Grab the write-side lock of the MDB while generating the replay list. This prevents new memberships from showing up while we are generating the replay list. But it leaves the scenario in which a deferred event was already generated, but not delivered, before we grabbed the lock. Therefore: 2. Make sure that no deferred version of a replay event is already enqueued to the switchdev deferred queue, before adding it to the replay list, when replaying additions.

The Linux Kernel versions 2.6.38 through 4.14 have a problematic use of pmd_mkdirty() in the touch_pmd() function inside the THP implementation. touch_pmd() can be reached by get_user_pages(). In such case, the pmd will become dirty. This scenario breaks the new can_follow_write_pmd()'s logic - pmd can become dirty without going through a COW cycle. This bug is not as severe as the original "Dirty cow" because an ext4 file (or any other regular file) cannot be mapped using THP. Nevertheless, it does allow us to overwrite read-only huge pages. For example, the zero huge page and sealed shmem files can be overwritten (since their mapping can be populated using THP). Note that after the first write page-fault to the zero page, it will be replaced with a new fresh (and zeroed) thp.

Race condition in the netlink_dump function in net/netlink/af_netlink.c in the Linux kernel before 4.6.3 allows local users to cause a denial of service (double free) or possibly have unspecified other impact via a crafted application that makes sendmsg system calls, leading to a free operation associated with a new dump that started earlier than anticipated.

A race condition was found in the Linux kernel's net/bluetooth in {conn,adv}_{min,max}_interval_set() function. This can result in I2cap connection or broadcast abnormality issue, possibly leading to denial of service.

A race condition was found in the Linux kernel's media/dvb-core in dvbdmx_write() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue.

A race condition was found in the Linux kernel's media/xc4000 device driver in xc4000 xc4000_get_frequency() function. This can result in return value overflow issue, possibly leading to malfunction or denial of service issue.

A race condition was found in the Linux kernel's bluetooth device driver in {min,max}_key_size_set() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue.