IBM OpenPages with Watson 8.1 and 8.2 could allow an authenticated user to upload a file that could execute arbitrary code on the system. IBM X-Force ID: 207633.

IBM Cognos Analytics 11.1.7 and 11.2.0 could allow an authenticated user to execute code remotely due to incorrectly neutralizaing user-contrlled input that could be interpreted a a server-side include (SSI) directive. IBM X-Force ID: 199915.

IBM Sterling B2B Integrator Standard Edition 5.2.0.0 through 5.2.6.5_2, 6.0.0.0 through 6.0.3.2, and 6.1.0.0 could allow a remote attacker to execute arbitrary code on the system, caused by the deserialization of untrusted data. By sending specially crafted request, an attacker could exploit this vulnerability to execute arbitrary code with SYSTEM privileges. IBM X-Force ID: 172452.

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 172084.

IBM BigFix Platform 9.5 could allow any authenticated user to upload any file to any location on the server with root privileges. This results in code execution on underlying system with root privileges. IBM X-Force ID: 155887.

IBM Spectrum Scale 4.2 and 5.0 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM X-Force ID: 172093.

IBM Intelligent Operations Center (IOC) 5.1.0 through 5.2.0 could allow an authenciated user to create arbitrary users which could cause ID management issues and result in code execution. IBM X-Force ID: 157011.

IBM Security Guardium 9.0, 9.5, and 10.6 are vulnerable to a privilege escalation which could allow an authenticated user to change the accessmgr password. IBM X-Force ID: 162768.

IBM API Connect's Developer Portal 2018.1 and 2018.4.1.3 is impacted by a privilege escalation vulnerability when integrated with an OpenID Connect (OIDC) user registry. IBM X-Force ID: 158544.

Unspecified vulnerability in the ADMIN_SP_C2 procedure in IBM DB2 8 before FP16, 9.1 before FP4a, and 9.5 before FP1 allows remote authenticated users to execute arbitrary code via unknown vectors. NOTE: the ADMIN_SP_C issue is already covered by CVE-2008-0699.

Unspecified vulnerability in the ADMIN_SP_C procedure (SYSPROC.ADMIN_SP_C) in IBM DB2 UDB before 8.2 Fixpak 16, 9.1 before FP4a, and 9.5 before FP1 allows remote authenticated users to execute arbitrary code via unspecified attack vectors.

Stack-based buffer overflow in IBM Informix Dynamic Server (IDS) 11.50 before 11.50.xC9W2 and 11.70 before 11.70.xC5 allows remote authenticated users to execute arbitrary code via crafted arguments in a SET COLLATION statement.

Buffer overflow in the IMAP service in IBM Lotus Domino before 6.5.6 FP2, and 7.x before 7.0.3, allows remote authenticated users to execute arbitrary code via a long mailbox name.

IBM Security Guardium 10.5 could allow a remote attacker to upload arbitrary files, which could allow the attacker to execute arbitrary code on the vulnerable web server. IBM X-Force ID: 160698.

IBM Kenexa LMS on Cloud 13.1 and 13.2 - 13.2.4 could allow a remote attacker to upload arbitrary files, which could allow the attacker to execute arbitrary code on the vulnerable server.

IBM Sterling B2B Integrator Standard Edition 5.2.0.0 through 5.2.6.5_2, 6.0.0.0 through 6.0.3.2, and 6.1.0.0 could allow an authenticated user to create a privileged account due to improper access controls. IBM X-Force ID: 188896.

Unspecified vulnerability in IBM QRadar SIEM 7.1 MR2 before Patch 11 IF02 and 7.2.x before 7.2.5 Patch 4 allows remote authenticated users to execute arbitrary commands with root privileges via unknown vectors.

IBM Tivoli IT Asset Management for IT, Tivoli Service Request Manager, and Change and Configuration Management Database 7.1 through 7.1.1.8 and 7.2 and Maximo Asset Management and Maximo Industry Solutions 7.1 through 7.1.1.8, 7.5 before 7.5.0.7 IFIX003, and 7.6 before 7.6.0.0 IFIX002 allow remote authenticated users to execute arbitrary code via unspecified vectors.

IBM Tivoli NetView Access Services (NVAS) allows remote authenticated users to gain privileges by entering the ADM command and modifying a "page ID" field to the EMSPG2 transaction code. NOTE: the vendor's perspective is that configuration and use of available security controls in the NVAS product mitigates the reported vulnerability

IBM Security SiteProtector System 3.0 before 3.0.0.7, 3.1 before 3.1.0.4, and 3.1.1 before 3.1.1.2 allows remote authenticated users to execute arbitrary commands with SYSTEM privileges via unspecified vectors.

IBM Endpoint Manager for Remote Control 9.0.0 and 9.0.1 and Tivoli Remote Control 5.1.2 store multiple hashes of partial passwords, which makes it easier for remote attackers to decrypt passwords by leveraging access to the hashes. IBM X-Force ID: 88309.

IBM Financial Transaction Manager (FTM) for Multi-Platform (MP) 3.0.0.0 through 3.0.0.7 is vulnerable to SQL injection. A remote attacker could send specially-crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 132926.

IBM Business Process Manager 7.5, 8.0, and 8.5 is vulnerable to privilege escalation by not properly distinguishing internal group memberships from user registry group memberships. By manipulating LDAP group membership an attack might gain privileged access. IBM X-Force ID: 130807.

IBM Maximo Asset Management 7.5 and 7.6 could allow a remote attacker to include arbitrary files, which could allow the attacker to execute arbitrary code on the vulnerable Web server. IBM X-Force ID: 129106.

The CICS listener in IBM TXSeries for Multiplatforms 6.2 GA waits for a forcepurge acknowledgement from the CICS Application Server (CICSAS) after an eci response timeout, which might allow remote authenticated users to cause a denial of service (forcepurge handling delay), or have unspecified other impact, via vectors involving slow or nonexistent acknowledgement.

IBM General Parallel File System (GPFS) 3.5.x before 3.5.0.27 and 4.1.x before 4.1.1.2 and Spectrum Scale 4.1.1.x before 4.1.1.2 allow local users to obtain root privileges for command execution via unspecified vectors.

The portal in IBM Tivoli Monitoring (ITM) 6.2.2 through FP9, 6.2.3 through FP5, and 6.3.0 before FP7 allows remote authenticated users to execute arbitrary commands by leveraging Take Action view authority and providing crafted input.

IBM WebSphere Message Broker 8 before 8.0.0.6 and Integration Bus 9 before 9.0.0.4 do not check authorization for MQSISTARTMSGFLOW and MQSISTOPMSGFLOW commands, which allows local users to bypass intended access restrictions, and start or stop a service, by issuing a command.

IBM Tivoli Endpoint Manager could allow a user under special circumstances to inject commands that would be executed with unnecessary higher privileges than expected.

The server in IBM Tivoli Storage Manager FastBack 6.1 before 6.1.12 allows remote attackers to execute arbitrary commands with SYSTEM privileges via unspecified vectors.

IBM Sterling B2B Integrator and and IBM Sterling File Gateway 6.1.0.0 through 6.1.2.7_2, 6.2.0.0 through 6.2.0.5_1, 6.2.1.0 through 6.2.1.1_1, and 6.2.2.0 could allow an unauthenticated attacker to send a specially crafted request that causes the application to crash.

The server in IBM Tivoli Storage Manager FastBack 6.1 before 6.1.12 allows remote attackers to execute arbitrary commands via unspecified vectors, a different vulnerability than CVE-2015-1938.

The server in IBM Tivoli Storage Manager FastBack 6.1 before 6.1.12 allows remote attackers to execute arbitrary commands via unspecified vectors, a different vulnerability than CVE-2015-1986.

IBM Resilient OnPrem 38.2 could allow a privileged user to inject malicious commands through Python3 scripting. IBM X-Force ID: 185503.

IBM Rational AppScan Source 8.0 through 8.0.0.2 and 8.5 through 8.5.0.1 and Security AppScan Source 8.6 through 8.6.0.2, 8.7 through 8.7.0.1, 8.8, 9.0 through 9.0.0.1, and 9.0.1 allow remote attackers to execute arbitrary commands on the installation server via unspecified vectors. IBM X-Force ID: 96721.

IBM Security Guardium 10.6 and 11.2 could allow a local attacker to execute arbitrary commands on the system as an unprivileged user, caused by command injection vulnerability. IBM X-Force ID: 186700.

IBM Notes 8.5 and 9.0 could allow a local attacker to execute arbitrary commands by carefully crafting a command line sent via the shared memory IPC. IBM X-Force ID: 134807.

IBM Maximo Asset Management 7.5 and 7.6 could allow an authenticated user to inject commands into work orders that could be executed by another user that downloads the affected file. IBM X-Force ID: 126538.

Certain IBM Aspera applications are vulnerable to command injection after valid authentication, which could allow an attacker with intimate knowledge of the system to execute commands in a SOAP API. IBM X-Force ID: 180810.

A vulnerability classified as critical has been found in SevOne Network Management System up to 5.7.2.22. This affects the file traceroute.php of the Traceroute Handler. The manipulation leads to privilege escalation with a command injection. It is possible to initiate the attack remotely.

IBM Security Guardium Database Activity Monitor 8.2 before p310, 9.x through 9.5 before p700, and 10.x through 10.1 before p100 allows local users to obtain administrator privileges for command execution via unspecified vectors.

IBM i Access Family 1.1.2 through 1.1.4 and 1.1.4.3 through 1.1.9.0 could allow a local authenticated attacker to execute arbitrary code on the system, caused by DLL search order hijacking vulnerability. By placing a specially crafted file in a compromised folder, an attacker could exploit this vulnerability to execute arbitrary code on the system. IBM X-Force ID: 236581.

IBM InfoSphere DataStage 11.7 is vulnerable to a command injection vulnerability due to improper neutralization of special elements. IBM X-Force ID:  236687.

IBM Cloud Pak for Data 4.5 and 4.6 could allow a privileged user to upload malicious files of dangerous types that can be automatically processed within the product's environment. IBM X-Force ID: 232034.

IBM Resilient SOAR V38.0 could allow a privileged user to create create malicious scripts that could be executed as another user. IBM X-Force ID: 198759.

IBM Security Secret Server 10.7 could allow a privileged user to perform unauthorized command injection due to imporoper input neutralization of special elements. IBM X-Force ID: 170011.

A vulnerability was detected in Tenda HG3 2.0. The impacted element is an unknown function of the file /boaform/formCountrystr. The manipulation of the argument countrystr results in os command injection. The attack may be performed from remote. The exploit is now public and may be used.

A vulnerability was determined in Tenda HG3 2.0. This vulnerability affects the function formTracert of the file /boaform/formTracert. Executing a manipulation of the argument datasize can lead to command injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.

A security flaw has been discovered in Tenda HG3 2.0 300003070. This vulnerability affects the function formgponConf of the file /boaform/admin/formgponConf. The manipulation of the argument fmgpon_loid results in os command injection. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was detected in Totolink NR1800X 9.1.0u.6279_B20210910. This affects the function sub_41A68C of the file /cgi-bin/cstecgi.cgi. Performing a manipulation of the argument setUssd results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used.