A vulnerability in IPv6 ingress packet processing for Cisco UCS Central Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high CPU utilization on the targeted device. The vulnerability is due to insufficient rate limiting protection for IPv6 ingress traffic. An attacker could exploit this vulnerability by sending the affected device a high rate of IPv6 packets. Successful exploitation could allow the attacker to cause a DoS condition due to CPU and resource constraints. Cisco Bug IDs: CSCuv34544.

A vulnerability in the Session Initiation Protocol (SIP) call-handling functionality of Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware could allow an unauthenticated, remote attacker to cause an affected phone to reload unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the firmware of an affected phone incorrectly handles errors that could occur when an incoming phone call is not answered. An attacker could exploit this vulnerability by sending a set of maliciously crafted SIP packets to an affected phone. A successful exploit could allow the attacker to cause the affected phone to reload unexpectedly, resulting in a temporary DoS condition. This vulnerability affects Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware if they are running a Multiplatform Firmware release prior to Release 11.1(2). Cisco Bug IDs: CSCvi24718.

A vulnerability in the IP Version 4 (IPv4) fragment reassembly function of Cisco 3500, 5500, and 8500 Series Wireless LAN Controller Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a corruption of an internal data structure process that occurs when the affected software reassembles certain IPv4 packets. An attacker could exploit this vulnerability by sending certain malformed IPv4 fragments to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. This vulnerability affects all releases of 8.4 until the first fixed release for the 5500 and 8500 Series Wireless LAN Controllers and releases 8.5.103.0 and 8.5.105.0 for the 3500, 5500, and 8500 Series Wireless LAN Controllers. Cisco Bug IDs: CSCvf89222.

A vulnerability in the web UI of Cisco FXOS and Cisco UCS Fabric Interconnect Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to incorrect input validation in the web UI. An attacker could exploit this vulnerability by sending a malicious HTTP or HTTPS packet directed to the physical management interface of an affected system. A successful exploit could allow the attacker to cause the process to crash and possibly reload the device, resulting in a denial of service (DoS) condition on the affected system. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvb61398, CSCvb86799.

A vulnerability in the IP Version 4 (IPv4) processing code of Cisco IOS XE Software running on Cisco Catalyst 3850 and Cisco Catalyst 3650 Series Switches could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain IPv4 packets. An attacker could exploit this vulnerability by sending specific IPv4 packets to an IPv4 address on an affected device. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. If the switch does not reboot when under attack, it would require manual intervention to reload the device. This vulnerability affects Cisco Catalyst 3850 and Cisco Catalyst 3650 Series Switches that are running Cisco IOS XE Software Release 16.1.1 or later, until the first fixed release, and are configured with an IPv4 address. Cisco Bug IDs: CSCvd80714.

A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause one of the detection engine processes to run out of memory and thus slow down traffic processing. The vulnerability is due to improper handling of traffic when the Secure Sockets Layer (SSL) inspection policy is enabled. An attacker could exploit this vulnerability by sending malicious traffic through an affected device. An exploit could allow the attacker to increase the resource consumption of a single instance of the Snort detection engine on an affected device. This will lead to performance degradation and eventually the restart of the affected Snort process. Cisco Bug IDs: CSCvi09219, CSCvi29845.

A vulnerability in the Server Message Block Version 2 (SMBv2) and Version 3 (SMBv3) protocol implementation for the Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause the device to run low on system memory, possibly preventing the device from forwarding traffic. It is also possible that a manual reload of the device may be required to clear the condition. The vulnerability is due to incorrect SMB header validation. An attacker could exploit this vulnerability by sending a custom SMB file transfer through the targeted device. A successful exploit could cause the device to consume an excessive amount of system memory and prevent the SNORT process from forwarding network traffic. This vulnerability can be exploited using either IPv4 or IPv6 in combination with SMBv2 or SMBv3 network traffic.

A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted packet to an affected device on TCP port 4786. Only Smart Install client switches are affected. Cisco devices that are configured as a Smart Install director are not affected by this vulnerability. Cisco Bug IDs: CSCvd40673.

A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause a heap overflow condition on the affected device, which will cause the device to reload and result in a DoS condition. Cisco Bug IDs: CSCvg62730.

A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098.

A vulnerability in the SM-1T3/E3 firmware on Cisco Second Generation Integrated Services Routers (ISR G2) and the Cisco 4451-X Integrated Services Router (ISR4451-X) could allow an unauthenticated, remote attacker to cause the ISR G2 Router or the SM-1T3/E3 module on the ISR4451-X to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of user input. An attacker could exploit this vulnerability by first connecting to the SM-1T3/E3 module console and entering a string sequence. A successful exploit could allow the attacker to cause the ISR G2 Router or the SM-1T3/E3 module on the ISR4451-X to reload, resulting in a DoS condition on an affected device.

A vulnerability in the web portal of the Cisco Prime Collaboration Provisioning Tool could allow an unauthenticated, remote attacker to create a denial of service (DoS) condition for individual users. The vulnerability is due to weak login controls. An attacker could exploit this vulnerability by using a brute-force attack (Repeated Bad Login Attempts). A successful exploit could allow the attacker to restrict user access. Manual administrative intervention is required to restore access. Cisco Bug IDs: CSCvd07264.

A vulnerability in management interface access control list (ACL) configuration of Cisco NX-OS System Software could allow an unauthenticated, remote attacker to bypass configured ACLs on the management interface. This could allow traffic to be forwarded to the NX-OS CPU for processing, leading to high CPU utilization and a denial of service (DoS) condition. The vulnerability is due to a bad code fix in the 7.3.2 code train that could allow traffic to the management interface to be misclassified and not match the proper configured ACLs. An attacker could exploit this vulnerability by sending crafted traffic to the management interface. An exploit could allow the attacker to bypass the configured management interface ACLs and impact the CPU of the targeted device, resulting in a DoS condition. This vulnerability affects the following Cisco products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvf31132.

A vulnerability in the implementation of Session Initiation Protocol (SIP) processing in Cisco Small Business SPA514G IP Phones could allow an unauthenticated, remote attacker to cause an affected device to become unresponsive, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of SIP request messages by an affected device. An attacker could exploit this vulnerability by sending crafted SIP messages to an affected device. A successful exploit could allow the attacker to cause the affected device to become unresponsive, resulting in a DoS condition that persists until the device is restarted manually. Cisco has not released software updates that address this vulnerability. This vulnerability affects Cisco Small Business SPA514G IP Phones that are running firmware release 7.6.2SR2 or earlier.

A vulnerability in the implementation of Point-to-Point Tunneling Protocol (PPTP) functionality in Cisco Aironet 1810, 1830, and 1850 Series Access Points could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of Generic Routing Encapsulation (GRE) frames that pass through the data plane of an affected access point. An attacker could exploit this vulnerability by initiating a PPTP connection to an affected access point from a device that is registered to the same wireless network as the access point and sending a malicious GRE frame through the data plane of the access point. A successful exploit could allow the attacker to cause the NSS core process on the affected access point to crash, which would cause the access point to reload and result in a DoS condition. This vulnerability affects Cisco Aironet 1810, 1830, and 1850 Series Access Points that are running Cisco Mobility Express Software Release 8.4.100.0, 8.5.103.0, or 8.5.105.0 and are configured as a master, subordinate, or standalone access point. Cisco Bug IDs: CSCvf73890.

Unspecified vulnerability in the Wireless LAN Controller (WLC) TSEC driver in the Cisco 4400 WLC, Cisco Catalyst 6500 and 7600 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.x before 4.2.176.0 and 5.x before 5.1 allows remote attackers to cause a denial of service (device crash or hang) via unknown IP packets.

A vulnerability in the implementation of Internet Key Exchange Version 1 (IKEv1) functionality in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of specific IKEv1 packets. An attacker could exploit this vulnerability by sending crafted IKEv1 packets to an affected device during an IKE negotiation. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuj73916.

A vulnerability in the Bidirectional Forwarding Detection (BFD) offload implementation of Cisco Catalyst 4500 Series Switches and Cisco Catalyst 4500-X Series Switches could allow an unauthenticated, remote attacker to cause a crash of the iosd process, causing a denial of service (DoS) condition. The vulnerability is due to insufficient error handling when the BFD header in a BFD packet is incomplete. An attacker could exploit this vulnerability by sending a crafted BFD message to or across an affected switch. A successful exploit could allow the attacker to trigger a reload of the system. This vulnerability affects Catalyst 4500 Supervisor Engine 6-E (K5), Catalyst 4500 Supervisor Engine 6L-E (K10), Catalyst 4500 Supervisor Engine 7-E (K10), Catalyst 4500 Supervisor Engine 7L-E (K10), Catalyst 4500E Supervisor Engine 8-E (K10), Catalyst 4500E Supervisor Engine 8L-E (K10), Catalyst 4500E Supervisor Engine 9-E (K10), Catalyst 4500-X Series Switches (K10), Catalyst 4900M Switch (K5), Catalyst 4948E Ethernet Switch (K5). Cisco Bug IDs: CSCvc40729.

A vulnerability in the Local Packet Transport Services (LPTS) feature set of Cisco ASR 9000 Series Aggregation Services Router Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of input and validation checking on certain Precision Time Protocol (PTP) ingress traffic to an affected device. An attacker could exploit this vulnerability by injecting malformed traffic into an affected device. A successful exploit could allow the attacker to cause services on the device to become unresponsive, resulting in a DoS condition. Cisco Bug IDs: CSCvj22858.

The H.225 subsystem in Cisco TelePresence System MXP Series Software before F9.3.1 allows remote attackers to cause a denial of service (device reload) via crafted packets, aka Bug ID CSCty45745.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packets when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could cause process crashes and result in a DoS condition on the device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69960, CSCve02463, CSCve04859, CSCve41530, CSCve41537, CSCve41541, CSCve41557.

A vulnerability in the Switch Integrated Security Features of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an interface queue wedge. The vulnerability is due to incorrect handling of crafted IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv6 packets through the device. An exploit could allow the attacker to cause an interface queue wedge. This vulnerability affects the Cisco cBR-8 Converged Broadband Router, Cisco ASR 1000 Series Aggregation Services Routers, and Cisco Cloud Services Router 1000V Series when configured with IPv6. In the field and internal testing, this vulnerability was only observed or reproduced on the Cisco cBR-8 Converged Broadband Router. The Cisco ASR 1000 Series Aggregation Services Routers and Cisco Cloud Services Router 1000V Series contain the same code logic, so affected trains have had the code fix applied; however, on these two products, the vulnerability has not been observed in the field or successfully reproduced internally. Cisco Bug IDs: CSCvd75185.

A vulnerability in the ingress flow creation functionality of Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the CPU to increase upwards of 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incorrect handling of an internal software lock that could prevent other system processes from getting CPU cycles, causing a high CPU condition. An attacker could exploit this vulnerability by sending a steady stream of malicious IP packets that can cause connections to be created on the targeted device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition during which traffic through the device could be delayed. This vulnerability applies to either IPv4 or IPv6 ingress traffic. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 2100 Series Security Appliances, Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvf63718.

Cisco IOS 12.1 through 12.4, and 15.0M before 15.0(1)M1, allows remote attackers to cause a denial of service (interface queue wedge) via malformed H.323 packets, aka Bug ID CSCta19962.

A vulnerability in the web framework of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a buffer overflow condition on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly parsing malformed HTTP packets that are destined to a device. An attacker could exploit this vulnerability by sending a malformed HTTP packet to an affected device for processing. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected device, resulting in a DoS condition.

A vulnerability in the IPv6 processing code of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect handling of specific IPv6 hop-by-hop options. An attacker could exploit this vulnerability by sending a malicious IPv6 packet to or through the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device.

A vulnerability in the crypto engine of the Cisco Integrated Services Module for VPN (ISM-VPN) running Cisco IOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient handling of VPN traffic by the affected device. An attacker could exploit this vulnerability by sending crafted VPN traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to hang or crash, resulting in a DoS condition. Cisco Bug IDs: CSCvd39267.

A vulnerability in the Zero Touch Provisioning service of the Cisco SD-WAN Solution could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect bounds checks for certain values in packets that are sent to the Zero Touch Provisioning service of the affected software. An attacker could exploit this vulnerability by sending malicious packets to the affected software for processing. When the software processes the packets, a buffer overflow condition could occur and cause an affected device to reload. A successful exploit could allow the attacker to cause a temporary DoS condition while the device reloads. This vulnerability can be exploited only by traffic that is destined for an affected device. It cannot be exploited by traffic that is transiting a device. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69914.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a memory leak or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device to be processed. A successful exploit could cause an affected device to continuously consume memory and eventually reload, resulting in a DoS condition. Cisco Bug IDs: CSCvf22394.

A vulnerability in the packet processing of Cisco IOS XE Software for Cisco 4461 Integrated Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incorrect processing of IPv4 or IPv6 traffic to or through an affected device. An attacker could exploit this vulnerability by sending IP traffic to or through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

The TCP Input module in Cisco IOS 12.2 through 12.4 and 15.0 through 15.4, when NAT is used, allows remote attackers to cause a denial of service (memory consumption or device reload) via crafted TCP packets, aka Bug IDs CSCuh33843 and CSCuj41494.

The SIP implementation in Cisco TelePresence TC Software 4.x and 5.x and TE Software 4.x and 6.0 allows remote attackers to cause a denial of service (device reload) via crafted SIP packets, aka Bug ID CSCud29566.

A vulnerability in Multicast Source Discovery Protocol (MSDP) ingress packet processing for Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the MSDP session to be unexpectedly reset, causing a short denial of service (DoS) condition. The MSDP session will restart within a few seconds. More Information: CSCvd94828. Known Affected Releases: 4.3.2.MCAST 6.0.2.BASE. Known Fixed Releases: 6.3.1.19i.MCAST 6.2.3.1i.MCAST 6.2.2.17i.MCAST 6.1.4.12i.MCAST.

A vulnerability in the TCP throttling process for the GUI of the Cisco Identity Services Engine (ISE) 2.1(0.474) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device where the ISE GUI may fail to respond to new or established connection requests. The vulnerability is due to insufficient TCP rate limiting protection on the GUI. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP connections to the GUI. An exploit could allow the attacker to cause the GUI to stop responding while the high rate of connections is in progress. Cisco Bug IDs: CSCvc81803.

Cisco Wireless LAN Controller (WLC) devices 7.2, 7.3, and 7.4 before 7.4.110.0 allow remote attackers to cause a denial of service (device restart) via a crafted 802.11 Ethernet frame, aka Bug ID CSCuf80681.

A vulnerability in the TCP connection handling functionality of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to disable TCP ports and cause a denial of service (DoS) condition on an affected system. The vulnerability is due to a lack of rate-limiting functionality in the TCP Listen application of the affected software. An attacker could exploit this vulnerability by sending a crafted TCP traffic stream in which specific types of TCP packets are flooded to an affected device, for example a TCP packet stream in which the TCP FIN bit is set in all the TCP packets. A successful exploit could allow the attacker to cause certain TCP listening ports on the affected system to stop accepting incoming connections for a period of time or until the affected device is restarted, resulting in a DoS condition. In addition, system resources, such as CPU and memory, could be exhausted during the attack. Cisco Bug IDs: CSCva29806.

A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812.

A vulnerability in the Trust Verification Service (TVS) of Cisco Unified Communications Manager could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of Transport Layer Security (TLS) traffic by the affected software. An attacker could exploit this vulnerability by generating incomplete traffic streams. A successful exploit could allow the attacker to deny access to the TVS for an affected device, resulting in a DoS condition, until an administrator restarts the service. Known Affected Releases 10.0(1.10000.24) 10.5(2.10000.5) 11.0(1.10000.10) 9.1(2.10000.28). Cisco Bug IDs: CSCux21905.

A vulnerability in the implementation of the H.264 protocol in Cisco Meeting Server (CMS) 2.1.4 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected application does not properly validate Fragmentation Unit (FU-A) protocol packets. An attacker could exploit this vulnerability by sending a crafted H.264 FU-A packet through the affected application. A successful exploit could allow the attacker to cause a DoS condition on the affected system due to an unexpected restart of the CMS media process on the system. Although the CMS platform continues to operate and only the single, affected CMS media process is restarted, a brief interruption of media traffic for certain users could occur. Cisco Bug IDs: CSCve10131.

A vulnerability in the ingress UDP packet processing functionality of Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software 19.2 through 21.0 could allow an unauthenticated, remote attacker to cause both control function (CF) instances on an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient handling of user-supplied data by the affected software. An attacker could exploit this vulnerability by sending crafted UDP packets to the distributed instance (DI) network addresses of both CF instances on an affected system. A successful exploit could allow the attacker to cause an unhandled error condition on the affected system, which would cause the CF instances to reload and consequently cause the entire VPC to reload, resulting in the disconnection of all subscribers and a DoS condition on the affected system. This vulnerability can be exploited via IPv4 traffic only. Cisco Bug IDs: CSCvc01665 CSCvc35565.

A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002.

Multiple Cisco products are affected by a vulnerability in local file management for certain system log files of Cisco collaboration products that could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability occurs because a certain system log file does not have a maximum size restriction. Therefore, the file is allowed to consume the majority of available disk space on the appliance. An attacker could exploit this vulnerability by sending crafted remote connection requests to the appliance. Successful exploitation could allow the attacker to increase the size of a system log file so that it consumes most of the disk space. The lack of available disk space could lead to a DoS condition in which the application functions could operate abnormally, making the appliance unstable. This vulnerability affects the following Cisco Voice Operating System (VOS)-based products: Emergency Responder, Finesse, Hosted Collaboration Mediation Fulfillment, MediaSense, Prime License Manager, SocialMiner, Unified Communications Manager (UCM), Unified Communications Manager IM and Presence Service (IM&P - earlier releases were known as Cisco Unified Presence), Unified Communication Manager Session Management Edition (SME), Unified Contact Center Express (UCCx), Unified Intelligence Center (UIC), Unity Connection, Virtualized Voice Browser. This vulnerability also affects Prime Collaboration Assurance and Prime Collaboration Provisioning. Cisco Bug IDs: CSCvd10872, CSCvf64322, CSCvf64332, CSCvi29538, CSCvi29543, CSCvi29544, CSCvi29546, CSCvi29556, CSCvi29571, CSCvi31738, CSCvi31741, CSCvi31762, CSCvi31807, CSCvi31818, CSCvi31823.

On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in CHM file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.

A vulnerability in the AppNav-XE feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of certain TCP segments. An attacker could exploit this vulnerability by sending a stream of crafted TCP traffic at a high rate through an interface of an affected device. That interface would need to have AppNav interception enabled. A successful exploit could allow the attacker to cause the device to reload.

On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in the TIFF file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.