A vulnerability in the web server for Cisco IP Phones could allow an unauthenticated, remote attacker to execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web server of a targeted device. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a DoS condition.

A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the request admin-tech command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the request admin-tech command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69852, CSCvi69856.

Cisco Unified Videoconferencing (UVC) System 5110 and 5115, when the Linux operating system is used, has a default password for the (1) root, (2) cs, and (3) develop accounts, which makes it easier for remote attackers to obtain access via the (a) FTP or (b) SSH daemon, aka Bug ID CSCti54008.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 on 4404 series controllers does not properly implement the WEBAUTH_REQD state, which allows remote attackers to bypass intended access restrictions via WLAN traffic, aka Bug ID CSCtb75305.

Multiple buffer overflows in the authentication functionality in the web-server module in Cisco CiscoWorks Common Services before 4.0 allow remote attackers to execute arbitrary code via a session on TCP port (1) 443 or (2) 1741, aka Bug ID CSCti41352.

Directory traversal vulnerability in processImageSave.jsp in DCNM-SAN Server in Cisco Prime Data Center Network Manager (DCNM) before 6.2(1) allows remote attackers to write arbitrary files via the chartid parameter, aka Bug IDs CSCue77035 and CSCue77036. NOTE: this can be leveraged to execute arbitrary commands by using the JBoss autodeploy functionality.

A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995.

A vulnerability in the symbolic link (symlink) creation functionality of the AutoVNF tool for the Cisco Ultra Services Framework could allow an unauthenticated, remote attacker to read sensitive files or execute malicious code on an affected system. The vulnerability is due to the absence of validation checks for the input that is used to create symbolic links. This vulnerability affects all releases of the Cisco Ultra Services Framework prior to Releases 5.0.3 and 5.1. Cisco Bug IDs: CSCvc76654.

A vulnerability in the AutoIT service of Cisco Ultra Services Framework Staging Server could allow an unauthenticated, remote attacker to execute arbitrary shell commands as the Linux root user. The vulnerability is due to improper shell invocations. An attacker could exploit this vulnerability by crafting CLI command inputs to execute Linux shell commands as the root user. This vulnerability affects all releases of Cisco Ultra Services Framework Staging Server prior to Releases 5.0.3 and 5.1. Cisco Bug IDs: CSCvc76673.

A vulnerability in the web interface for Cisco Prime Collaboration Provisioning could allow an unauthenticated, remote attacker to bypass authentication and perform command injection with root privileges. The vulnerability is due to missing security constraints in certain HTTP request methods, which could allow access to files via the web interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the targeted application. This vulnerability affects Cisco Prime Collaboration Provisioning Software Releases prior to 12.1. Cisco Bug IDs: CSCvc98724.

Cisco Gigabit Switch routers running IOS allow remote attackers to forward unauthorized packets due to improper handling of the "established" keyword in an access list.

The CGI subsystem on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 allows remote attackers to execute arbitrary commands via a request to TCP port 443, related to a "command injection vulnerability," aka Bug ID CSCtf97221.

The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote attackers to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31640.

The default configuration of Cisco Tandberg C Series Endpoints, and Tandberg E and EX Personal Video units, with software before TC4.0.0 has a blank password for the root account, which makes it easier for remote attackers to obtain access via an unspecified login method.

The TFTP implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x, 1.6.0, and 1.6.1 allows remote attackers to obtain sensitive information via a GET request, aka Bug ID CSCte43876.

A vulnerability in Cisco Prime Data Center Network Manager (DCNM) Software could allow an unauthenticated, remote attacker to log in to the administrative console of a DCNM server by using an account that has a default, static password. The account could be granted root- or system-level privileges. The vulnerability exists because the affected software has a default user account that has a default, static password. The user account is created automatically when the software is installed. An attacker could exploit this vulnerability by connecting remotely to an affected system and logging in to the affected software by using the credentials for this default user account. A successful exploit could allow the attacker to use this default user account to log in to the affected software and gain access to the administrative console of a DCNM server. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software releases prior to Release 10.2(1) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd95346.

A vulnerability in the role-based access control (RBAC) functionality of Cisco Prime Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to access sensitive information or execute arbitrary code with root privileges on an affected system. The vulnerability is due to the lack of authentication and authorization mechanisms for a debugging tool that was inadvertently enabled in the affected software. An attacker could exploit this vulnerability by remotely connecting to the debugging tool via TCP. A successful exploit could allow the attacker to access sensitive information about the affected software or execute arbitrary code with root privileges on the affected system. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software Releases 10.1(1) and 10.1(2) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd09961.

Unspecified vulnerability in the embedded HTTPS server on the Cisco IronPort Encryption Appliance 6.2.x before 6.2.9.1 and 6.5.x before 6.5.2, and the IronPort PostX MAP before 6.2.9.1, allows remote attackers to execute arbitrary code via unknown vectors, aka IronPort Bug 65923.

The Java Servlet framework on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 and Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug IDs CSCtf42005 and CSCtf42008.

Cisco TelePresence Manager 1.2.x through 1.6.x allows remote attackers to perform unspecified actions and consequently execute arbitrary code via a crafted request to the Java RMI interface, related to a "command injection vulnerability," aka Bug ID CSCtf97085.

Multiple unspecified vulnerabilities in the web server in Cisco Unified MeetingPlace 7 before 7.0(2.3) hotfix 5F, 6 before 6.0.639.3, and possibly 5 allow remote attackers to create (1) user or (2) administrator accounts via a crafted URL in a request to the internal interface, aka Bug IDs CSCtc59231 and CSCtd40661.

A vulnerability in the Play Framework of Cisco Elastic Services Controller (ESC) could allow an unauthenticated, remote attacker to gain full access to the affected system. The vulnerability is due to static, default credentials for the Cisco ESC UI that are shared between installations. An attacker who can extract the static credentials from an existing installation of Cisco ESC could generate an admin session token that allows access to all instances of the ESC web UI. This vulnerability affects Cisco Elastic Services Controller prior to releases 2.3.1.434 and 2.3.2. Cisco Bug IDs: CSCvc76627.

The WIL-A module in Cisco TelePresence VX Clinical Assistant 1.2 before 1.21 changes the admin password to an empty password upon a reboot, which makes it easier for remote attackers to obtain access via the administrative interface, aka Bug ID CSCuj17238.

A vulnerability in the AutoVNF tool for the Cisco Ultra Services Framework could allow an unauthenticated, remote attacker to access administrative credentials for Cisco Elastic Services Controller (ESC) and Cisco OpenStack deployments in an affected system. The vulnerability exists because the affected software logs administrative credentials in clear text for Cisco ESC and Cisco OpenStack deployment purposes. An attacker could exploit this vulnerability by accessing the AutoVNF URL for the location where the log files are stored and subsequently accessing the administrative credentials that are stored in clear text in those log files. This vulnerability affects all releases of the Cisco Ultra Services Framework prior to Releases 5.0.3 and 5.1. Cisco Bug IDs: CSCvc76659.

Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) complete an SSL handshake with an HTTPS client even if this client is unauthorized, which might allow remote attackers to bypass intended access restrictions via an HTTPS session, aka Bug ID CSCso10876.

Buffer overflow in Cisco CiscoWorks Internetwork Performance Monitor (IPM) 2.6 and earlier on Windows, as distributed in CiscoWorks LAN Management Solution (LMS), allows remote attackers to execute arbitrary code via a malformed getProcessName CORBA General Inter-ORB Protocol (GIOP) request, related to a "third-party component," aka Bug ID CSCsv62350.

Cisco Linksys Routers EA2700, EA3500, E4200, EA4500: A bug can cause an unsafe TCP port to open which leads to unauthenticated access

A vulnerability in the Data-in-Motion (DMo) process installed with the Cisco IOx application environment could allow an unauthenticated, remote attacker to cause a stack overflow that could allow remote code execution with root privileges in the virtual instance running on an affected device. The vulnerability is due to insufficient bounds checking in the DMo process. An attacker could exploit this vulnerability by sending crafted packets that are forwarded to the DMo process for evaluation. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. This vulnerability affects the following Cisco 800 Series Industrial Integrated Services Routers: Cisco IR809 and Cisco IR829. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52330.

The Adaptive Security Device Management (ASDM) remote-management feature in Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(6), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.1), and 9.1.x before 9.1(2.6) does not properly implement the authentication-certificate option, which allows remote attackers to bypass authentication via a TCP session to an ASDM interface, aka Bug ID CSCuh44815.

The controller in Cisco Unified Wireless Network (UWN) Solution 7.x through 7.0.98.0 has (1) a default SNMP read-only community of public, (2) a default SNMP read-write community of private, and a value of "default" for the (3) SNMP v3 username, (4) SNMP v3 authentication password, and (5) SNMP v3 privacy password, which makes it easier for remote attackers to obtain access.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 does not use an adequate message-digest algorithm for a self-signed certificate, which allows remote attackers to bypass intended access restrictions via vectors involving collisions, aka Bug ID CSCtd67660.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

A vulnerability in Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points running Cisco Mobility Express Software could allow an unauthenticated, remote attacker to take complete control of an affected device. The vulnerability is due to the existence of default credentials for an affected device that is running Cisco Mobility Express Software, regardless of whether the device is configured as a master, subordinate, or standalone access point. An attacker who has layer 3 connectivity to an affected device could use Secure Shell (SSH) to log in to the device with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco Aironet 1830 Series and Cisco Aironet 1850 Series Access Points that are running an 8.2.x release of Cisco Mobility Express Software prior to Release 8.2.111.0, regardless of whether the device is configured as a master, subordinate, or standalone access point. Release 8.2 was the first release of Cisco Mobility Express Software for next generation Cisco Aironet Access Points. Cisco Bug IDs: CSCva50691.

A vulnerability in the web-based GUI of Cisco Prime Home could allow an unauthenticated, remote attacker to bypass authentication and execute actions with administrator privileges. The vulnerability is due to a processing error in the role-based access control (RBAC) of URLs. An attacker could exploit this vulnerability by sending API commands via HTTP to a particular URL without prior authentication. An exploit could allow the attacker to perform any actions in Cisco Prime Home with administrator privileges. This vulnerability affects Cisco Prime Home versions from 6.3.0.0 to the first fixed release 6.5.0.1. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. Cisco Bug IDs: CSCvb49837.

Cisco TelePresence System Software 1.10.1 and earlier on 500, 13X0, 1X00, 30X0, and 3X00 devices, and 6.0.3 and earlier on TX 9X00 devices, has a default password for the pwrecovery account, which makes it easier for remote attackers to modify the configuration or perform arbitrary actions via HTTPS requests, aka Bug ID CSCui43128.

Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.1) uses default (1) usernames and (2) passwords for (a) the administrator and (b) web management, which makes it easier for remote attackers to perform configuration changes or obtain operating-system access.

Cisco ACE 4710 Application Control Engine Appliance before A1(8a) uses default (1) usernames and (2) passwords for (a) the administrator, (b) web management, and (c) device management, which makes it easier for remote attackers to perform configuration changes to the Device Manager and other components, or obtain operating-system access.

The Tomcat Web Management feature in Cisco Unified Customer Voice Portal (CVP) Software before 9.0.1 ES 11 does not properly configure Tomcat components, which allows remote attackers to execute arbitrary code via a crafted (1) HTTP or (2) HTTPS request, aka Bug ID CSCub38384.

Buffer overflow in the Intelligent Platform Management Interface (IPMI) functionality in the Manager component in Cisco Unified Computing System (UCS) 1.0 and 1.1 before 1.1(1j) and 1.2 before 1.2(1b) allows remote attackers to execute arbitrary code via malformed data in a UDP packet, aka Bug ID CSCtd32371.

Directory traversal vulnerability in the TFTP service in Cisco CiscoWorks Common Services (CWCS) 3.0.x through 3.2.x on Windows, as used in Cisco Unified Service Monitor, Security Manager, TelePresence Readiness Assessment Manager, Unified Operations Manager, Unified Provisioning Manager, and other products, allows remote attackers to access arbitrary files via unspecified vectors.

Cisco Application Networking Manager (ANM) before 2.0 uses a default MySQL root password, which makes it easier for remote attackers to execute arbitrary operating-system commands or change system files.

A vulnerability in Cisco Meeting Server and Meeting App could allow an unauthenticated, remote attacker to execute arbitrary code on an affected system. This vulnerability affects the following products: Cisco Meeting Server releases prior to 2.0.1, Acano Server releases prior to 1.8.16 and prior to 1.9.3, Cisco Meeting App releases prior to 1.9.8, Acano Meeting Apps releases prior to 1.8.35. More Information: CSCva75942 CSCvb67878. Known Affected Releases: 1.81.92.0.

Cisco Application Networking Manager (ANM) before 2.0 uses default usernames and passwords, which makes it easier for remote attackers to access the application, or cause a denial of service via configuration changes, related to "default user credentials during installation."

Unspecified vulnerability on the Cisco Wireless LAN Controller (WLC) platform 4.x before 4.2.205.0 and 5.x before 5.2.191.0, as used in Cisco 1500 Series, 2000 Series, 2100 Series, 4100 Series, 4200 Series, and 4400 Series Wireless Services Modules (WiSM), WLC Modules for Integrated Services Routers, and Catalyst 3750G Integrated Wireless LAN Controllers, allows remote attackers to modify the configuration via a crafted (1) HTTP or (2) HTTPS request, aka Bug ID CSCsy44672.

Cisco Prime Data Center Network Manager (DCNM) before 6.1(1) does not properly restrict access to certain JBoss MainDeployer functionality, which allows remote attackers to execute arbitrary commands via JBoss Application Server Remote Method Invocation (RMI) services, aka Bug ID CSCtz44924.

Buffer overflow on Cisco Adaptive Security Appliances (ASA) 5580 series devices with software before 8.1(2) allows remote attackers to have an unspecified impact via long IKE attributes, aka Bug ID CSCsu43121.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco HyperFlex HX could allow an unauthenticated, remote attacker to perform command injection attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV160, RV160W, RV260, RV260P, and RV260W VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code as the root user on an affected device. These vulnerabilities exist because HTTP requests are not properly validated. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the web-based management interface of an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device.