An issue was discovered on LG mobile devices with Android OS 8.0, 8.1, 9, and 10 software. Attackers can bypass Factory Reset Protection (FRP). The LG ID is LVE-SMP-200004 (March 2020).

In Puma (RubyGem) before 4.3.5 and 3.12.6, a client could smuggle a request through a proxy, causing the proxy to send a response back to another unknown client. If the proxy uses persistent connections and the client adds another request in via HTTP pipelining, the proxy may mistake it as the first request's body. Puma, however, would see it as two requests, and when processing the second request, send back a response that the proxy does not expect. If the proxy has reused the persistent connection to Puma to send another request for a different client, the second response from the first client will be sent to the second client. This is a similar but different vulnerability from CVE-2020-11076. The problem has been fixed in Puma 3.12.6 and Puma 4.3.5.

In GoogleContactsSyncAdapter, there is a possible path traversal due to improper input sanitization. This could lead to a bypass of user interaction requirements with no additional execution privileges needed. User interaction is not needed for exploitation. Product: AndroidVersions: Android-10Android ID: A-32748076

A remotely triggerable memory overwrite in RSA key exchange in PuTTY before 0.71 can occur before host key verification.

An issue was discovered in RubyGems 2.6 and later through 3.0.2. Since Gem::CommandManager#run calls alert_error without escaping, escape sequence injection is possible. (There are many ways to cause an error.)

An issue was discovered in RubyGems 2.6 and later through 3.0.2. The gem owner command outputs the contents of the API response directly to stdout. Therefore, if the response is crafted, escape sequence injection may occur.

An issue was discovered in RubyGems 2.6 and later through 3.0.2. Gem::GemcutterUtilities#with_response may output the API response to stdout as it is. Therefore, if the API side modifies the response, escape sequence injection may occur.

An issue was discovered in RubyGems 2.6 and later through 3.0.2. Since Gem::UserInteraction#verbose calls say without escaping, escape sequence injection is possible.

python-gnupg 0.4.3 allows context-dependent attackers to trick gnupg to decrypt other ciphertext than intended. To perform the attack, the passphrase to gnupg must be controlled by the adversary and the ciphertext should be trusted. Related to a "CWE-20: Improper Input Validation" issue affecting the affect functionality component.

The pip package before 19.2 for Python allows Directory Traversal when a URL is given in an install command, because a Content-Disposition header can have ../ in a filename, as demonstrated by overwriting the /root/.ssh/authorized_keys file. This occurs in _download_http_url in _internal/download.py.

An issue was discovered on Samsung mobile devices with N(7.x), O(8.x), and P(9.0) software. An attacker can use Emergency mode to disable features. The Samsung IDs are SVE-2018-13164, SVE-2018-13165 (April 2019).

An issue was discovered on Samsung mobile devices with P(9.0) software. The Pin Window feature allows unauthenticated unpinning of an app. The Samsung ID is SVE-2018-13765 (March 2019).

An issue was discovered on Samsung mobile devices with N(7.x), O(8.x), and P(9.0) (Exynos7570, 7580, 7870, 7880, and 8890 chipsets) software. RKP memory corruption causes an arbitrary write to protected memory. The Samsung ID is SVE-2019-13921-2 (May 2019).

An issue was discovered on Samsung mobile devices with N(7.x), O(8.x), and P(9.0) software. Attackers can bypass Factory Reset Protection (FRP) via a Class 0 Type Message. The Samsung ID is SVE-2019-14941 (October 2019).

PuTTY before 0.73 mishandles the "bracketed paste mode" protection mechanism, which may allow a session to be affected by malicious clipboard content.

JetBrains YouTrack Mobile before 2021.2, is missing the security screen on Android and iOS.

runc through 1.0.0-rc8, as used in Docker through 19.03.2-ce and other products, allows AppArmor restriction bypass because libcontainer/rootfs_linux.go incorrectly checks mount targets, and thus a malicious Docker image can mount over a /proc directory.

An issue was discovered on LG mobile devices with Android OS 7.0, 7.1, 7.2, 8.0, 8.1, and 9.0 software. WapService allows unconfirmed configuration changes via a modified OMACP message. The LG ID is LVE-SMP-190006 (August 2019).

In JetBrains YouTrack Mobile before 2021.2, task hijacking on Android is possible.

cpio, as used in build 2007.05.10, 2010.07.28, and possibly other versions, allows remote attackers to overwrite arbitrary files via a symlink within an RPM package archive.

An issue was discovered on Samsung mobile devices with N(7.x) software. Persona has an unprotected API that allows launch of any activity with system privileges. The Samsung ID is SVE-2017-9000 (June 2017).

The build package before 20171128 did not check directory names during extraction of build results that allowed untrusted builds to write outside of the target system,allowing escape out of buildroots.

Unspecified vulnerability in Google Chrome before 11.0.696.57 allows remote attackers to bypass the pop-up blocker via vectors related to plug-ins.

An issue was discovered on Samsung mobile devices with N(7.x), O(8.x), and P(9.0) software. Voice Assistant mishandles the notification audibility of a secured app. The Samsung ID is SVE-2018-13326 (May 2019).

The location bar in Firefox for Android can be spoofed by forcing a user into fullscreen mode, blocking its exiting, and creating of a fake location bar without any user notification. Note: This issue only affects Firefox for Android. Other versions and operating systems are unaffected. This vulnerability affects Firefox < 50.

On Samsung Galaxy S4 through S7 devices, the "omacp" app ignores security information embedded in the OMACP messages resulting in remote unsolicited WAP Push SMS messages being accepted, parsed, and handled by the device, leading to unauthorized configuration changes, a subset of SVE-2016-6542.

An issue was discovered on Samsung mobile devices with P(9.0) software. The Settings application allows unauthenticated changes. The Samsung IDs are SVE-2019-13814, SVE-2019-13815 (March 2019).

An issue was discovered on Samsung mobile devices with O(8.x) and P(9.0) software. Attackers can change the USB configuration without authentication. The Samsung ID is SVE-2018-13300 (September 2019).

An issue was discovered on Samsung mobile devices with P(9.0), O(8.0), and N(7.1) software. Attackers can bypass Factory Reset Protection (FRP) via Smart Switch. The Samsung ID is SVE-2019-15138 (September 2019).

An issue was discovered on Samsung mobile devices with P(9.0) software. Attackers can bypass Factory Reset Protection (FRP) via an RCS call. The Samsung ID is SVE-2019-15035 (October 2019).

Blink, as used in Google Chrome before 52.0.2743.116, allows remote attackers to spoof the address bar via vectors involving a provisional URL for an initially empty document, related to FrameLoader.cpp and ScopedPageLoadDeferrer.cpp.

curl and libcurl before 7.50.1 do not check the client certificate when choosing the TLS connection to reuse, which might allow remote attackers to hijack the authentication of the connection by leveraging a previously created connection with a different client certificate.

Unspecified vulnerability in Google Chrome before 11.0.696.71 allows remote attackers to bypass the pop-up blocker via unknown vectors.

Go before 1.12.10 and 1.13.x before 1.13.1 allow HTTP Request Smuggling.

sf-pcapng.c in libpcap before 1.9.1 does not properly validate the PHB header length before allocating memory.

Inappropriate implementation in TLS in Google Chrome prior to 77.0.3865.75 allowed a remote attacker to spoof client IP address to websites via crafted TLS connections.

A tampering vulnerability exists when Git for Visual Studio improperly handles virtual drive paths, aka 'Git for Visual Studio Tampering Vulnerability'.

A vulnerability exists where the caret ("^") character is improperly escaped constructing some URIs due to it being used as a separator, allowing for possible spoofing of origin attributes. This vulnerability affects Firefox ESR < 60.8, Firefox < 68, and Thunderbird < 60.8.

Mozilla Firefox before 40.0 and Firefox ESR 38.x before 38.2 do not impose certain ECMAScript 6 requirements on JavaScript object properties, which allows remote attackers to bypass the Same Origin Policy via the reviver parameter to the JSON.parse method.

FreeRADIUS 2.2.x before 2.2.8 and 3.0.x before 3.0.9 does not properly check revocation of intermediate CA certificates.

content/browser/webui/content_web_ui_controller_factory.cc in Google Chrome before 43.0.2357.130 does not properly consider the scheme in determining whether a URL is associated with a WebUI SiteInstance, which allows remote attackers to bypass intended access restrictions via a similar URL, as demonstrated by use of http://gpu when there is a WebUI class for handling chrome://gpu requests.

An issue was discovered on Samsung mobile devices with M(6.0), N(7.x), and O(8.0) software. The Contacts application allows attackers to originate video calls because SS (Supplementary Service) and USSD (Unstructured Supplementary Service Data) codes are improperly secured. The Samsung ID is SVE-2018-11469 (April 2018).

android/java/src/org/chromium/chrome/browser/WebsiteSettingsPopup.java in Google Chrome before 43.0.2357.65 on Android does not properly restrict use of a URL's fragment identifier during construction of a page-info popup, which allows remote attackers to spoof the URL bar or deliver misleading popup content via crafted text.

The UnescapeURLWithAdjustmentsImpl implementation in net/base/escape.cc in Google Chrome before 45.0.2454.85 does not prevent display of Unicode LOCK characters in the omnibox, which makes it easier for remote attackers to spoof the SSL lock icon by placing one of these characters at the end of a URL, as demonstrated by the omnibox in localizations for right-to-left languages.

Mozilla Firefox before 36.0 does not properly recognize the equivalence of domain names with and without a trailing . (dot) character, which allows man-in-the-middle attackers to bypass the HPKP and HSTS protection mechanisms by constructing a URL with this character and leveraging access to an X.509 certificate for a domain with this character.

The ContainerNode::parserRemoveChild function in core/dom/ContainerNode.cpp in the HTML parser in Blink, as used in Google Chrome before 42.0.2311.90, allows remote attackers to bypass the Same Origin Policy via a crafted HTML document with an IFRAME element.

An issue was discovered on Samsung mobile devices with Q(10.0) software. The DynamicLockscreen Terms and Conditions can be accepted without authentication. The Samsung ID is SVE-2020-17079 (October 2020).

An issue was discovered on LG mobile devices with Android OS 7.0, 7.1, 7.2, 8.0, and 8.1 software. Applications with sensitive security settings (such as the package verifier application) mishandle unknown-source installations. The LG ID is LVE-SMP-190002 (September 2020).

The engineNextBytes function in classlib/modules/security/src/main/java/common/org/apache/harmony/security/provider/crypto/SHA1PRNG_SecureRandomImpl.java in the SecureRandom implementation in Apache Harmony through 6.0M3, as used in the Java Cryptography Architecture (JCA) in Android before 4.4 and other products, when no seed is provided by the user, uses an incorrect offset value, which makes it easier for attackers to defeat cryptographic protection mechanisms by leveraging the resulting PRNG predictability, as exploited in the wild against Bitcoin wallet applications in August 2013.

An improper control of parameters allows the spoofing of the from fields of the following screens: AgentTicketCompose, AgentTicketForward, AgentTicketBounce and AgentTicketEmailOutbound. This issue affects: ((OTRS)) Community Edition 5.0.x version 5.0.39 and prior versions; 6.0.x version 6.0.24 and prior versions. OTRS 7.0.x version 7.0.13 and prior versions.