Entes EMG12 versions 2.57 and prior The application uses a web interface where it is possible for an attacker to bypass authentication with a specially crafted URL. This could allow for remote code execution.

A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition, or to execute arbitrary code on an affected device. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted Smart Install message to an affected device on TCP port 4786. A successful exploit could allow the attacker to cause a buffer overflow on the affected device, which could have the following impacts: Triggering a reload of the device, Allowing the attacker to execute arbitrary code on the device, Causing an indefinite loop on the affected device that triggers a watchdog crash. Cisco Bug IDs: CSCvg76186.

A vulnerability in the web interface of the Cisco RV132W ADSL2+ Wireless-N VPN and RV134W VDSL2 Wireless-AC VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system, including issuing commands with root privileges. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to an incomplete input validation on user-controlled input in an HTTP request to the targeted device. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to execute arbitrary code as the root user and gain full control of the affected system or cause it to reload, resulting in a DoS condition. This vulnerability is fixed in firmware version 1.0.1.11 for the following Cisco products: RV132W ADSL2+ Wireless-N VPN Router and RV134W VDSL2 Wireless-AC VPN Router. Cisco Bug IDs: CSCvg92737, CSCvh60170.

A vulnerability in the ACS Report component of Cisco Secure Access Control System (ACS) could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected system. Commands executed by the attacker are processed at the targeted user's privilege level. The vulnerability is due to insufficient validation of the Action Message Format (AMF) protocol. An attacker could exploit this vulnerability by sending a crafted AMF message that contains malicious code to a targeted user. A successful exploit could allow the attacker to execute arbitrary commands on the ACS device. This vulnerability affects all releases of Cisco Secure ACS prior to Release 5.8 Patch 7. Cisco Bug IDs: CSCve69037.

A vulnerability in NoMachine App for Android 5.0.63 and earlier allows attackers to alter environment variables via unspecified vectors.

A vulnerability in Java deserialization used by Cisco Secure Access Control System (ACS) prior to release 5.8 patch 9 could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit this vulnerability by sending a crafted serialized Java object. An exploit could allow the attacker to execute arbitrary commands on the device with root privileges. Cisco Bug IDs: CSCvh25988.

The NativeAppServlet in ManageEngine Desktop Central MSP before 90075 allows remote attackers to execute arbitrary code via a crafted JSON object.

In OSSEC-HIDS 2.7 through 3.5.0, the OS_CleanMSG function in ossec-analysisd doesn't remove or encode terminal control characters or newlines from processed log messages. In many cases, those characters are later logged. Because newlines (\n) are permitted in messages processed by ossec-analysisd, it may be possible to inject nested events into the ossec log. Use of terminal control characters may allow obfuscating events or executing commands when viewed through vulnerable terminal emulators. This may be an unauthenticated remote attack for certain types and origins of logged data.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code or cause a DoS condition on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69962, CSCve02808, CSCve02810, CSCve02812, CSCve02819, CSCve02822, CSCve02831, CSCve04859.

A vulnerability in the Cisco Fabric Services (CFS) component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69943, CSCve02429, CSCve02433, CSCve02435, CSCve02445, CSCve04859.

SMC Networks D3G0804W D3GNV5M-3.5.1.6.10_GA devices allow remote command execution by leveraging access to the Network Diagnostic Tools screen, as demonstrated by an admin login. The attacker must use a Parameter Pollution approach against goform/formSetDiagnosticToolsFmPing by providing the vlu_diagnostic_tools__ping_address parameter twice: once with a shell metacharacter and a command name, and once with a command argument.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to read sensitive memory content, create a denial of service (DoS) condition, or execute arbitrary code as root. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow or buffer overread condition in the Cisco Fabric Services component, which could allow the attacker to read sensitive memory content, create a DoS condition, or execute arbitrary code as root. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69951, CSCve02459, CSCve02461, CSCve02463, CSCve02474, CSCve04859.

Junos OS routing protocol daemon (RPD) process may crash and restart or may lead to remote code execution while processing specific BGP NOTIFICATION messages. By continuously sending crafted BGP NOTIFICATION messages, an attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Due to design improvements, this issue does not affect Junos OS 16.1R1, and all subsequent releases. This issue only affects the receiving BGP device and is non-transitive in nature. Affected releases are Juniper Networks Junos OS: 15.1F5 versions starting from 15.1F5-S7 and all subsequent releases; 15.1F6 versions starting from 15.1F6-S3 and later releases prior to 15.1F6-S10; 15.1F7 versions 15.1 versions starting from 15.1R5 and later releases, including the Service Releases based on 15.1R5 and on 15.1R6 prior to 15.1R6-S6 and 15.1R7;

Trend Micro ServerProtect for Linux 3.0 before CP 1531 allows attackers to write to arbitrary files and consequently execute arbitrary code with root privileges by leveraging failure to validate software updates.

libautotrace.a in AutoTrace 0.31.1 has a "left shift ... cannot be represented in type int" issue in input-bmp.c:516:63.

A input validation vulnerability in HPE Operations Orchestration product all versions prior to 10.80, allows for the execution of code remotely.

The Service Appliance component in Mitel MiVoice Connect through 19.2 SP3 allows remote code execution because of incorrect data validation. The Service Appliances are SA 100, SA 400, and Virtual SA.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version 7.2 was found.

Improper Input Validation vulnerability in Mitsubishi Electric MELSEC-Q Series QJ71E71-100 first 5 digits of serial number "24061" or prior, Mitsubishi Electric MELSEC-L series LJ71E71-100 first 5 digits of serial number "24061" or prior and Mitsubishi Electric MELSEC iQ-R Series RD81MES96N firmware version "08" or prior allows a remote unauthenticated attacker to cause a denial of service (DoS) condition or execute malicious code on the target products by sending specially crafted packets.

A Remote Code Execution vulnerability in Hewlett Packard Enterprise Moonshot Provisioning Manager Appliance version v1.20 was found.

A file inclusion vulnerability exists in the confd.exe module in Honeywell Experion PKS R40x before R400.6, R41x before R410.6, and R43x before R430.2, which could lead to accepting an arbitrary file into the function, and potential information disclosure or remote code execution. Honeywell strongly encourages and recommends all customers running unsupported versions of EKPS prior to R400 to upgrade to a supported version.

install/make-config.php in ProjectSend r754 allows remote attackers to execute arbitrary PHP code via the dbprefix parameter, related to replacing TABLES_PREFIX in the configuration file.

dhtml.pl in MHF Media Pro allows remote attackers to execute arbitrary commands via shell metacharacters in the page parameter, as demonstrated using the (1) advert_top.htm or (2) advert_login.htm pages.

In ApexPro Telemetry Server, Versions 4.2 and prior, CARESCAPE Telemetry Server v4.2 & prior, Clinical Information Center (CIC) Versions 4.X and 5.X, CARESCAPE Telemetry Server Version 4.3, CARESCAPE Central Station (CSCS) Versions 1.X CARESCAPE Central Station (CSCS) Versions 2.X, B450 Version 2.X, B650 Version 1.X, B650 Version 2.X, B850 Version 1.X, B850 Version 2.X, an input validation vulnerability exists in the web-based system configuration utility that could allow an attacker to obtain arbitrary remote code execution.

Malicious PATCH requests submitted to servers using Spring Data REST versions prior to 2.6.9 (Ingalls SR9), versions prior to 3.0.1 (Kay SR1) and Spring Boot versions prior to 1.5.9, 2.0 M6 can use specially crafted JSON data to run arbitrary Java code.

XCOM Data Transport for Windows, Linux, and UNIX 11.6 releases contain a vulnerability due to insufficient input validation that could potentially allow remote attackers to execute arbitrary commands with elevated privileges.

Adobe Commerce versions 2.4.3-p1 (and earlier) and 2.3.7-p2 (and earlier) are affected by an improper input validation vulnerability during the checkout process. Exploitation of this issue does not require user interaction and could result in arbitrary code execution.

jslock.cpp in Mozilla Firefox 3.x before 3.0.2, Firefox 2.x before 2.0.0.18, Thunderbird 2.x before 2.0.0.18, and SeaMonkey 1.x before 1.1.13 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code by modifying the window.__proto__.__proto__ object in a way that causes a lock on a non-native object, which triggers an assertion failure related to the OBJ_IS_NATIVE function.

Policy resource matcher in Apache Ranger before 0.7.1 ignores characters after '*' wildcard character - like my*test, test*.txt. This can result in unintended behavior.

image_processing is an image processing wrapper for libvips and ImageMagick/GraphicsMagick. Prior to version 1.12.2, using the `#apply` method from image_processing to apply a series of operations that are coming from unsanitized user input allows the attacker to execute shell commands. This method is called internally by Active Storage variants, so Active Storage is vulnerable as well. The vulnerability has been fixed in version 1.12.2 of image_processing. As a workaround, users who process based on user input should always sanitize the user input by allowing only a constrained set of operations.

The Geo Mashup plugin before 1.10.4 for WordPress has insufficient sanitization of post editor and other user input.

The UMA product with software V200R001 and V300R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.

The UMA product with software V200R001 has a privilege elevation vulnerability due to insufficient validation or improper processing of parameters. An attacker could craft specific packets to exploit these vulnerabilities to gain elevated privileges.

An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.

The Intel Graphics Driver in Apple OS X through 10.9.2 does not properly validate a certain pointer, which allows attackers to execute arbitrary code via a crafted application.

The BasicService in Sun Java Web Start allows remote attackers to execute arbitrary programs on a client machine via a file:// URL argument to the showDocument method.

A weak password recovery process vulnerability in Fortinet FortiPortal versions 4.0.0 and below allows an attacker to execute unauthorized code or commands via a hidden Close button

An issue was discovered in api/includes/systems.php in Unitrends Enterprise Backup before 9.0.0. User input is not properly filtered before being sent to a popen function. This allows for remote code execution by sending a specially crafted user variable.

IBM Spectrum Protect 7.1 and 8.1 server is vulnerable to a stack-based buffer overflow, caused by improper bounds checking. This could allow a remote attacker to execute arbitrary code on the system with the privileges of an administrator or user associated with the Spectrum Protect server or cause the Spectrum Protect server to crash. IBM X-Force ID: 179990.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175023.

An issue was discovered in zsh before 5.6. Shebang lines exceeding 64 characters were truncated, potentially leading to an execve call to a program name that is a substring of the intended one.

An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.

An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.

In the vote (aka "Polls, Votes") module before 21.0.100 of Bitrix Site Manager, a remote unauthenticated attacker can execute arbitrary code.

A vulnerability in the update process for the dynamic JAR file of the Cisco Context Service software development kit (SDK) could allow an unauthenticated, remote attacker to execute arbitrary code on the affected device with the privileges of the web server. More Information: CSCvb66730. Known Affected Releases: 2.0.

The Bluetooth driver in Apple OS X before 10.10.2 allows attackers to execute arbitrary code in a privileged context or cause a denial of service (arbitrary-size bzero of kernel memory) via a crafted app.

An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.

Pexip Infinity before 14.2 allows remote attackers to cause a denial of service (service restart) or execute arbitrary code via vectors related to Conferencing Nodes.

An issue was discovered in certain Apple products. macOS before 10.13 is affected. The issue involves the third-party "file" product. Versions before 5.30 allow remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact.

Astaro Security Gateway (aka ASG) 7 allows remote attackers to execute arbitrary code via a crafted request to index.plx.