The fix for CVE-2019-11599, affecting the Linux kernel before 5.0.10 was not complete. A local user could use this flaw to obtain sensitive information, cause a denial of service, or possibly have other unspecified impacts by triggering a race condition with mmget_not_zero or get_task_mm calls.

In all versions of cpio before 2.13 does not properly validate input files when generating TAR archives. When cpio is used to create TAR archives from paths an attacker can write to, the resulting archive may contain files with permissions the attacker did not have or in paths he did not have access to. Extracting those archives from a high-privilege user without carefully reviewing them may lead to the compromise of the system.

jbd2_journal_wait_updates in fs/jbd2/transaction.c in the Linux kernel before 5.17.1 has a use-after-free caused by a transaction_t race condition.

arch/powerpc/mm/mmu_context_book3s64.c in the Linux kernel before 5.1.15 for powerpc has a bug where unrelated processes may be able to read/write to one another's virtual memory under certain conditions via an mmap above 512 TB. Only a subset of powerpc systems are affected.

An issue was discovered in the Linux kernel before 5.0.4. There is a use-after-free upon attempted read access to /proc/ioports after the ipmi_si module is removed, related to drivers/char/ipmi/ipmi_si_intf.c, drivers/char/ipmi/ipmi_si_mem_io.c, and drivers/char/ipmi/ipmi_si_port_io.c.

rkt through version 1.30.0 does not isolate processes in containers that are run with `rkt enter`. Processes run with `rkt enter` are given all capabilities during stage 2 (the actual environment in which the applications run). Compromised containers could exploit this flaw to access host resources.

rkt through version 1.30.0 does not isolate processes in containers that are run with `rkt enter`. Processes run with `rkt enter` do not have seccomp filtering during stage 2 (the actual environment in which the applications run). Compromised containers could exploit this flaw to access host resources.

It was discovered freeradius up to and including version 3.0.19 does not correctly configure logrotate, allowing a local attacker who already has control of the radiusd user to escalate his privileges to root, by tricking logrotate into writing a radiusd-writable file to a directory normally inaccessible by the radiusd user. NOTE: the upstream software maintainer has stated "there is simply no way for anyone to gain privileges through this alleged issue."

With shadow paging enabled, the INVPCID instruction results in a call to kvm_mmu_invpcid_gva. If INVPCID is executed with CR0.PG=0, the invlpg callback is not set and the result is a NULL pointer dereference.

A vulnerability was found in the Linux kernel’s cgroup_release_agent_write in the kernel/cgroup/cgroup-v1.c function. This flaw, under certain circumstances, allows the use of the cgroups v1 release_agent feature to escalate privileges and bypass the namespace isolation unexpectedly.

A use-after-free flaw was found in the Linux kernel’s sound subsystem in the way a user triggers concurrent calls of PCM hw_params. The hw_free ioctls or similar race condition happens inside ALSA PCM for other ioctls. This flaw allows a local user to crash or potentially escalate their privileges on the system.

A potentially exploitable crash in TransportSecurityInfo used for SSL can be triggered by data stored in the local cache in the user profile directory. This issue is only exploitable in combination with another vulnerability allowing an attacker to write data into the local cache or from locally installed malware. This issue also triggers a non-exploitable startup crash for users switching between the Nightly and Release versions of Firefox if the same profile is used. This vulnerability affects Thunderbird < 60.2.1, Firefox ESR < 60.2.1, and Firefox < 62.0.2.

In postgresql 9.3.x before 9.3.21, 9.4.x before 9.4.16, 9.5.x before 9.5.11, 9.6.x before 9.6.7 and 10.x before 10.2, pg_upgrade creates file in current working directory containing the output of `pg_dumpall -g` under umask which was in effect when the user invoked pg_upgrade, and not under 0077 which is normally used for other temporary files. This can allow an authenticated attacker to read or modify the one file, which may contain encrypted or unencrypted database passwords. The attack is infeasible if a directory mode blocks the attacker searching the current working directory or if the prevailing umask blocks the attacker opening the file.

A crafted NTFS image can cause a NULL pointer dereference in ntfs_extent_inode_open in NTFS-3G < 2021.8.22.

The skyring-setup command creates random password for mongodb skyring database but it writes password in plain text to /etc/skyring/skyring.conf file which is owned by root but read by local user. Any local user who has access to system running skyring service will be able to get password in plain text.

The agp_generic_remove_memory function in drivers/char/agp/generic.c in the Linux kernel before 2.6.38.5 does not validate a certain start parameter, which allows local users to gain privileges or cause a denial of service (system crash) via a crafted AGPIOC_UNBIND agp_ioctl ioctl call, a different vulnerability than CVE-2011-1745.

Multiple integer overflows in the (1) agp_allocate_memory and (2) agp_create_user_memory functions in drivers/char/agp/generic.c in the Linux kernel before 2.6.38.5 allow local users to trigger buffer overflows, and consequently cause a denial of service (system crash) or possibly have unspecified other impact, via vectors related to calls that specify a large number of memory pages.

Integer overflow in the agp_generic_insert_memory function in drivers/char/agp/generic.c in the Linux kernel before 2.6.38.5 allows local users to gain privileges or cause a denial of service (system crash) via a crafted AGPIOC_BIND agp_ioctl ioctl call.

In NTFS-3G versions < 2021.8.22, when a specially crafted NTFS attribute is supplied to the function ntfs_get_attribute_value, a heap buffer overflow can occur allowing for memory disclosure or denial of service. The vulnerability is caused by an out-of-bound buffer access which can be triggered by mounting a crafted ntfs partition. The root cause is a missing consistency check after reading an MFT record : the "bytes_in_use" field should be less than the "bytes_allocated" field. When it is not, the parsing of the records proceeds into the wild.

Multiple integer overflows in the block drivers in QEMU, possibly before 2.0.0, allow local users to cause a denial of service (crash) via a crafted catalog size in (1) the parallels_open function in block/parallels.c or (2) bochs_open function in bochs.c, a large L1 table in the (3) qcow2_snapshot_load_tmp in qcow2-snapshot.c or (4) qcow2_grow_l1_table function in qcow2-cluster.c, (5) a large request in the bdrv_check_byte_request function in block.c and other block drivers, (6) crafted cluster indexes in the get_refcount function in qcow2-refcount.c, or (7) a large number of blocks in the cloop_open function in cloop.c, which trigger buffer overflows, memory corruption, large memory allocations and out-of-bounds read and writes.

The _httpsrequest function in Snoopy allows remote attackers to execute arbitrary commands. NOTE: this issue exists dues to an incomplete fix for CVE-2008-4796.

A flaw was found in the Emacs text editor. Processing a specially crafted org-mode code with the "org-babel-execute:latex" function in ob-latex.el can result in arbitrary command execution. This CVE exists because of a CVE-2023-28617 security regression for the emacs package in Red Hat Enterprise Linux 8.8 and Red Hat Enterprise Linux 9.2.

Ansible before version 2.2.0 fails to properly sanitize fact variables sent from the Ansible controller. An attacker with the ability to create special variables on the controller could execute arbitrary commands on Ansible clients as the user Ansible runs as.

IBM Cloud Pak for Data 4.5 and 4.6 could allow a privileged user to upload malicious files of dangerous types that can be automatically processed within the product's environment. IBM X-Force ID: 232034.

An issue was discovered in Amanda 3.3.1. A user with backup privileges can trivially compromise a client installation. The "runtar" setuid root binary does not check for additional arguments supplied after --create, allowing users to manipulate commands and perform command injection as root.

rubygem-openshift-origin-console in Red Hat OpenShift 2.2 allows remote authenticated users to execute arbitrary commands via a crafted request to the Broker.

A flaw was found in SSSD, where the sssctl command was vulnerable to shell command injection via the logs-fetch and cache-expire subcommands. This flaw allows an attacker to trick the root user into running a specially crafted sssctl command, such as via sudo, to gain root access. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability.

Snoopy allows remote attackers to execute arbitrary commands. NOTE: this vulnerability exists due to an incomplete fix for CVE-2014-5008.

Snoopy allows remote attackers to execute arbitrary commands.

sapi/cgi/cgi_main.c in PHP before 5.3.12 and 5.4.x before 5.4.2, when configured as a CGI script (aka php-cgi), does not properly handle query strings that lack an = (equals sign) character, which allows remote attackers to execute arbitrary code by placing command-line options in the query string, related to lack of skipping a certain php_getopt for the 'd' case.

A vulnerability was found in ImageMagick. This security flaw causes a shell command injection vulnerability via video:vsync or video:pixel-format options in VIDEO encoding/decoding.

A command injection flaw was found in the "Host Init Config" template in the Foreman application via the "Install Packages" field on the "Register Host" page. This flaw allows an attacker with the necessary privileges to inject arbitrary commands into the configuration, potentially allowing unauthorized command execution during host registration. Although this issue requires user interaction to execute injected commands, it poses a significant risk if an unsuspecting user runs the generated registration script.

It was found that ceph-isci-cli package as shipped by Red Hat Ceph Storage 2 and 3 is using python-werkzeug in debug shell mode. This is done by setting debug=True in file /usr/bin/rbd-target-api provided by ceph-isci-cli package. This allows unauthenticated attackers to access this debug shell and escalate privileges. Once an attacker has successfully connected to this debug shell they will be able to execute arbitrary commands remotely. These commands will run with the same privileges as of user executing the application which is using python-werkzeug with debug shell mode enabled. In - Red Hat Ceph Storage 2 and 3, ceph-isci-cli package runs python-werkzeug library with root level permissions.

DHCP packages in Red Hat Enterprise Linux 6 and 7, Fedora 28, and earlier are vulnerable to a command injection flaw in the NetworkManager integration script included in the DHCP client. A malicious DHCP server, or an attacker on the local network able to spoof DHCP responses, could use this flaw to execute arbitrary commands with root privileges on systems using NetworkManager and configured to obtain network configuration using the DHCP protocol.

Exim 4.72 and earlier allows local users to gain privileges by leveraging the ability of the exim user account to specify an alternate configuration file with a directive that contains arbitrary commands, as demonstrated by the spool_directory directive.